Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›1 Kinematics
  4. ›1.2 Displacement, velocity and acceleration

AP Physics 1 · Unit 1 · Kinematics

1.2 Displacement, velocity and acceleration

Distinguish displacement from distance, and calculate average velocity and average acceleration from motion data.

  • 4 min read
  • 5 parts
  • 9 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 9 questions
1/5Displacement tracks change in position, not path length
  1. 1Displacement tracks change in position, not path length
  2. 2Average velocity is displacement divided by time
  3. 3Acceleration is the rate of change of velocity
  4. 4Signs show whether an object speeds up or slows
  5. 5Motion data reveal velocity and acceleration step by step
  6. Check your recall
  7. Practice: 9 questions
1

Part 1 of 5: Displacement tracks change in position, not path length

Drive 5 km to a store and then 5 km back home. The odometer reads 10 km, yet you are where you started. This shows the difference between two quantities.

The distance traveled is the total length of the path. The displacement is the change in position, drawn from the start to the finish. On a straight line it is Δx=xf−xi\Delta x=x_f-x_iΔx=xf​−xi​.

Common mistake

The magnitude of displacement is never greater than the distance. They match only for motion in one direction along a straight line.

Key terms · tap one for its definition

distance

A scalar equal to the total length of the path an object travels, measured in meters.

displacement

A vector giving the straight-line change in position from start to finish, measured in meters.

Part 1 done

2

Part 2 of 5: Average velocity is displacement divided by time

Now ask how quickly position changes. The average velocity is displacement divided by the time interval, vavg=ΔxΔtv_{avg}=\frac{\Delta x}{\Delta t}vavg​=ΔtΔx​. Its unit is m/s, and its sign shows direction.

The average speed is total distance divided by total time. It is a scalar, so it has no direction and is never negative. A runner who returns to the start has zero average velocity but a nonzero average speed.

Worked example

Average velocity and average speed

A runner goes 60 m east in 10 s, then 20 m west in 5 s. Find the average velocity and the average speed for the whole trip.
  1. 1
    Take east as positive. Displacement: Δx=+60+(−20)=+40 m\Delta x=+60+(-20)=+40\ \mathrm{m}Δx=+60+(−20)=+40 m.
  2. 2
    Total time: Δt=10+5=15 s\Delta t=10+5=15\ \mathrm{s}Δt=10+5=15 s.
  3. 3
    Average velocity: vavg=40 m15 s=2.7 m/sv_{avg}=\frac{40\ \mathrm{m}}{15\ \mathrm{s}}=2.7\ \mathrm{m/s}vavg​=15 s40 m​=2.7 m/s.
  4. 4
    Distance: 60+20=80 m60+20=80\ \mathrm{m}60+20=80 m, so average speed is 80 m15 s=5.3 m/s\frac{80\ \mathrm{m}}{15\ \mathrm{s}}=5.3\ \mathrm{m/s}15 s80 m​=5.3 m/s.

Answer: The average velocity is 2.7 m/s east. The average speed is 5.3 m/s.

Key terms · tap one for its definition

average velocity

Total displacement divided by the time interval; a vector measured in m/s.

average speed

Total distance traveled divided by the total time taken; a scalar measured in m/s.

Part 2 done

Quick check

One question on the part you just read

Easy

State which quantity is the change in position of an object.
Show answer and explanation

Answer: C · Worked explanation

Displacement is defined as the change in position from start to finish. Distance is the total path length, which can be larger than the change in position. Speed and acceleration describe rates, not a change in position. Distance is the most tempting wrong option because it also measures how far something moved.
3

Part 3 of 5: Acceleration is the rate of change of velocity

A car pulling away from a light speeds up. A car braking for the light slows down. Both are changing velocity, so both are accelerating.

The acceleration of an object is the change in velocity divided by the time taken, aavg=ΔvΔt=vf−viΔta_{avg}=\frac{\Delta v}{\Delta t}=\frac{v_f-v_i}{\Delta t}aavg​=ΔtΔv​=Δtvf​−vi​​. Its unit is m/s2\mathrm{m/s^2}m/s2. Because velocity is a vector, a change in direction also counts.

An acceleration of 2 m/s22\ \mathrm{m/s^2}2 m/s2 means velocity changes by 2 m/s every second. Larger accelerations change velocity faster.

Worked example

Average acceleration

A car speeds up from 5.0 m/s east to 20.0 m/s east in 6.0 s. Find its average acceleration.
  1. 1
    Take east as positive. vi=+5.0 m/sv_i=+5.0\ \mathrm{m/s}vi​=+5.0 m/s and vf=+20.0 m/sv_f=+20.0\ \mathrm{m/s}vf​=+20.0 m/s.
  2. 2
    Change in velocity: Δv=20.0−5.0=15.0 m/s\Delta v=20.0-5.0=15.0\ \mathrm{m/s}Δv=20.0−5.0=15.0 m/s.
  3. 3
    Divide by time: aavg=15.0 m/s6.0 s=2.5 m/s2a_{avg}=\frac{15.0\ \mathrm{m/s}}{6.0\ \mathrm{s}}=2.5\ \mathrm{m/s^2}aavg​=6.0 s15.0 m/s​=2.5 m/s2.

Answer: The average acceleration is 2.5 m/s22.5\ \mathrm{m/s^2}2.5 m/s2 east.

Key term

acceleration

The rate at which velocity changes with time; a vector measured in m/s2\mathrm{m/s^2}m/s2.

Part 3 done

4

Part 4 of 5: Signs show whether an object speeds up or slows

Motion on a line needs a sign convention, such as east positive and west negative. Then velocity and acceleration each carry a plus or minus sign.

Compare the two signs. When they match, the object speeds up. When they differ, it slows down.

Reading velocity and acceleration signs

VelocityAccelerationMotion
++Speeding up in the + direction
+−Slowing down in the + direction
−−Speeding up in the − direction
−+Slowing down in the − direction
Velocity
+
Acceleration
+
Motion
Speeding up in the + direction
Velocity
+
Acceleration
−
Motion
Slowing down in the + direction
Velocity
−
Acceleration
−
Motion
Speeding up in the − direction
Velocity
−
Acceleration
+
Motion
Slowing down in the − direction

Common mistake

A negative acceleration does not always mean slowing down. A negative velocity with a negative acceleration is speeding up.

Key term

sign convention

A chosen rule making one direction along a line positive and the opposite direction negative.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the SI unit of acceleration.
Show answer and explanation

Answer: B · Worked explanation

Acceleration is a change in velocity, in m/s, divided by a time, in s. This gives m/s2\mathrm{m/s^2}m/s2. The unit m/s is the unit of velocity, so it is the most tempting wrong option. The other two options do not come from dividing velocity by time.
5

Part 5 of 5: Motion data reveal velocity and acceleration step by step

Now put the ideas to work on a table of readings. Divide each change in velocity by the matching time interval. Do this one interval at a time.

Constant velocity gives zero acceleration. A different acceleration in each interval means the motion is not uniform overall.

Worked example

Reading acceleration from data

A cart's velocity (east positive) is 3.0 m/s at 0 s, 9.0 m/s at 3.0 s, 9.0 m/s at 5.0 s and 1.0 m/s at 9.0 s. Find the average acceleration in each interval.
  1. 1
    0 to 3.0 s: a=9.0−3.03.0=+2.0 m/s2a=\frac{9.0-3.0}{3.0}=+2.0\ \mathrm{m/s^2}a=3.09.0−3.0​=+2.0 m/s2.
  2. 2
    3.0 to 5.0 s: a=9.0−9.02.0=0a=\frac{9.0-9.0}{2.0}=0a=2.09.0−9.0​=0.
  3. 3
    5.0 to 9.0 s: a=1.0−9.04.0=−2.0 m/s2a=\frac{1.0-9.0}{4.0}=-2.0\ \mathrm{m/s^2}a=4.01.0−9.0​=−2.0 m/s2.

Answer: The accelerations are +2.0+2.0+2.0, 0 and −2.0 m/s2-2.0\ \mathrm{m/s^2}−2.0 m/s2. The cart speeds up east, moves steadily, then slows while still moving east.

Exam tip

Always include units and a direction or sign in your answer. A bare number such as 2.0 is incomplete.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why a runner who finishes a full lap has zero displacement but a nonzero distance.

    Show mark schemeHide mark scheme

    Model answer

    The runner finishes at the starting point, so the change in position is zero. The runner still traveled along a path, so the distance is the full lap length.

    • 1 mark for stating that the change in position from start to finish is zero
    • 1 mark for stating that the path length traveled is not zero
  2. 2.Calculate[2 marks]

    Calculate the average velocity of a cyclist who moves 90 m east in 15 s.

    Show mark schemeHide mark scheme

    Model answer

    vavg=ΔxΔt=90 m15 s=6.0 m/sv_{avg}=\frac{\Delta x}{\Delta t}=\frac{90\ \mathrm{m}}{15\ \mathrm{s}}=6.0\ \mathrm{m/s}vavg​=ΔtΔx​=15 s90 m​=6.0 m/s east.

    • 1 mark for dividing displacement by time
    • 1 mark for obtaining 6.0 m/s east
  3. 3.Calculate[3 marks]

    Calculate the average acceleration of a car whose velocity changes from 4.0 m/s east to 16 m/s east in 3.0 s.

    Show mark schemeHide mark scheme

    Model answer

    aavg=16−4.03.0=4.0 m/s2a_{avg}=\frac{16-4.0}{3.0}=4.0\ \mathrm{m/s^2}aavg​=3.016−4.0​=4.0 m/s2 east.

    • 1 mark for using change in velocity divided by time
    • 1 mark for substituting 12 m/s and 3.0 s
    • 1 mark for obtaining 4.0 m/s24.0\ \mathrm{m/s^2}4.0 m/s2 east
  4. 4.Determine[2 marks]

    Determine whether an object with velocity −5 m/s-5\ \mathrm{m/s}−5 m/s and acceleration −2 m/s2-2\ \mathrm{m/s^2}−2 m/s2 is speeding up or slowing down.

    Show mark schemeHide mark scheme

    Model answer

    The velocity and acceleration have the same sign, so the object is speeding up in the negative direction.

    • 1 mark for noting that the signs are the same
    • 1 mark for concluding that the object is speeding up
  5. 5.Describe[3 marks]

    Describe how average speed and average velocity can differ for the same trip.

    Show mark schemeHide mark scheme

    Model answer

    Average speed is total distance divided by time and has no direction. Average velocity is displacement divided by time and has a direction. They differ when the path is not a straight line in one direction.

    • 1 mark for stating that average speed uses total distance
    • 1 mark for stating that average velocity uses displacement and has direction
    • 1 mark for stating that they differ when the motion changes direction or the path is not straight

Practice this topic

9 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 9 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

Average acceleration is defined as
Show answer and explanation

Answer: B · Worked explanation

Average acceleration is the change in velocity over the time interval it takes. The option dividing change in position by time describes average velocity instead. Total distance over time is average speed. Multiplying velocity by time gives a displacement, not a rate of change.
4.

Medium·Determine[2 marks]

A cyclist rides 150 m north in 30 s and then 50 m south in 10 s. Determine the average velocity for the whole trip.
Show answer and explanation

Answer: A · Worked explanation

Take north as positive. Displacement is 150−50=100 m150-50=100\ \mathrm{m}150−50=100 m north, and total time is 40 s, so vavg=10040=2.5 m/sv_{avg}=\frac{100}{40}=2.5\ \mathrm{m/s}vavg​=40100​=2.5 m/s north. The 5.0 m/s option is the average speed, found from the 200 m of total distance. Average speed and average velocity answer different questions, so check which one is asked.
5.

Medium·Calculate[2 marks]

A ball's velocity changes from 12 m/s east to 4.0 m/s east in 2.0 s. Calculate its average acceleration.
Show answer and explanation

Answer: B · Worked explanation

Take east as positive: a=4.0−122.0=−4.0 m/s2a=\frac{4.0-12}{2.0}=-4.0\ \mathrm{m/s^2}a=2.04.0−12​=−4.0 m/s2, which is 4.0 m/s24.0\ \mathrm{m/s^2}4.0 m/s2 west. The east option ignores the sign of the change. The ball is still moving east, but it is slowing down, so the acceleration points opposite to its motion. Check the sign of your answer against the motion.
6.

Medium·Predict[1 mark]

A car has velocity +8 m/s+8\ \mathrm{m/s}+8 m/s and acceleration −3 m/s2-3\ \mathrm{m/s^2}−3 m/s2. Predict how its speed is changing.
Show answer and explanation

Answer: B · Worked explanation

The velocity and acceleration have opposite signs, so the acceleration opposes the motion and the car slows down. The option about increasing speed treats any acceleration as speeding up. The constant-speed option would need zero acceleration, but the acceleration here is nonzero.
7.

Medium·Determine[2 marks]

A skater moves from x=+2.0 mx=+2.0\ \mathrm{m}x=+2.0 m to x=−6.0 mx=-6.0\ \mathrm{m}x=−6.0 m in 4.0 s. Determine the average velocity.
Show answer and explanation

Answer: C · Worked explanation

The displacement is Δx=−6.0−2.0=−8.0 m\Delta x=-6.0-2.0=-8.0\ \mathrm{m}Δx=−6.0−2.0=−8.0 m, so vavg=−8.04.0=−2.0 m/sv_{avg}=\frac{-8.0}{4.0}=-2.0\ \mathrm{m/s}vavg​=4.0−8.0​=−2.0 m/s. The −1.5 m/s-1.5\ \mathrm{m/s}−1.5 m/s option divides only the final position by the time. Velocity depends on the change in position, not on the final position alone. Always subtract the initial position from the final position, keeping the signs.
8.

Hard·Determine[2 marks]

A student walks 30 m east in 20 s and then 30 m west in 10 s. Determine her average speed and average velocity for the whole trip.
Show answer and explanation

Answer: A · Worked explanation

The distance is 30+30=60 m30+30=60\ \mathrm{m}30+30=60 m in 30 s, so the average speed is 2.0 m/s2.0\ \mathrm{m/s}2.0 m/s. She ends where she started, so the displacement and average velocity are zero. The option giving both as 2.0 m/s treats velocity like speed and ignores direction.
9.

Hard·Calculate[2 marks]

An object's velocity changes from +6.0 m/s+6.0\ \mathrm{m/s}+6.0 m/s to −2.0 m/s-2.0\ \mathrm{m/s}−2.0 m/s in 4.0 s. Calculate its average acceleration.
Show answer and explanation

Answer: C · Worked explanation

The change in velocity is −2.0−6.0=−8.0 m/s-2.0-6.0=-8.0\ \mathrm{m/s}−2.0−6.0=−8.0 m/s, so a=−8.04.0=−2.0 m/s2a=\frac{-8.0}{4.0}=-2.0\ \mathrm{m/s^2}a=4.0−8.0​=−2.0 m/s2. The −1.0 m/s2-1.0\ \mathrm{m/s^2}−1.0 m/s2 option uses the final speed as positive 2.0 m/s, which ignores the reversal of direction. The -8.0 option forgets to divide by time. Keep the signs when finding a change in velocity.

Keep going

Next topic1.3 Representing motionPrevious topic1.1 Scalars and vectors

More in Unit 1 · Kinematics

  1. 1.1Scalars and vectorsNotes · 10 questions
  2. 1.2Displacement, velocity and accelerationNotes · 9 questions
  3. 1.3Representing motionNotes · 10 questions
  4. 1.4Reference frames and relative motionNotes · 10 questions
  5. 1.5Vectors and motion in two dimensionsNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Displacement tracks change in position, not path length
  2. 2Average velocity is displacement divided by time
  3. 3Acceleration is the rate of change of velocity
  4. 4Signs show whether an object speeds up or slows
  5. 5Motion data reveal velocity and acceleration step by step
  6. Check your recall
  7. Practice: 9 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe