Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›3 Work, Energy and Power
  4. ›3.2 Work

AP Physics 1 · Unit 3 · Work, Energy and Power

3.2 Work

Describe work as energy transferred by a force and calculate it for a constant force, including the meaning of its sign.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Work is energy transferred by a force
  1. 1Work is energy transferred by a force
  2. 2Only the part of the force along the motion counts
  3. 3The sign of the work shows the direction of energy transfer
  4. 4Common forces do positive, negative or zero work
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Work is energy transferred by a force

Pushing a stalled car makes it speed up. Your push transfers energy to the car. In physics, work is the energy a force transfers to or from an object as the object moves.

Work needs both a force and a displacement. A person pushing on a solid wall may feel tired. The wall does not move, so no energy is transferred to it and the work done on it is zero.

Work is a scalar quantity. Its SI unit is the joule (J), where 1 J=1 N m1\,\mathrm{J}=1\,\mathrm{N\,m}1J=1Nm.

Key terms · tap one for its definition

work

For a constant force, W=Fdcos⁡θW=Fd\cos\thetaW=Fdcosθ; a scalar measured in joules, equal to the energy transferred by that force.

joule

The SI unit of work and energy; one joule is the work done by a 1 N force over 1 m along its direction.

Part 1 done

2

Part 2 of 4: Only the part of the force along the motion counts

Now consider a suitcase pulled by a handle held above the horizontal. The handle pulls partly forward and partly upward. Only the forward part moves the suitcase along the floor.

For a constant force, the work is W=Fdcos⁡θW=Fd\cos\thetaW=Fdcosθ. Here FFF and ddd are the magnitudes of the force and the displacement. The angle θ\thetaθ lies between the force and the displacement.

Figure 1. Only the component of the force along the displacement, F cos θ, does work.

When the force points along the motion, θ=0∘\theta=0^\circθ=0∘ and W=FdW=FdW=Fd.

Worked example

Work by an angled pull

A person pulls a sled with a constant 40 N force directed 30° above the horizontal. The sled moves 5.0 m along level ground. Calculate the work done by the person.
  1. 1
    Use W=Fdcos⁡θW=Fd\cos\thetaW=Fdcosθ with θ=30∘\theta=30^\circθ=30∘.
  2. 2
    Substitute: W=(40 N)(5.0 m)cos⁡30∘W=(40\,\mathrm{N})(5.0\,\mathrm{m})\cos30^\circW=(40N)(5.0m)cos30∘.
  3. 3
    Calculate: W=200×0.866=173 JW=200\times0.866=173\,\mathrm{J}W=200×0.866=173J.

Answer: The work done is about 1.7×102 J1.7\times10^{2}\,\mathrm{J}1.7×102J.

Part 2 done

Quick check

One question on the part you just read

Easy

State the SI unit of work.
Show answer and explanation

Answer: B · Worked explanation

Work is energy transferred, and its SI unit is the joule. Because work is force times distance, one joule equals one newton meter. The watt is a tempting choice, but it measures power, which is energy transferred per second, not the energy itself.
3

Part 3 of 4: The sign of the work shows the direction of energy transfer

Work can be positive, negative or zero. A force that opposes the motion does negative work, which removes energy from the object. The angle between force and displacement sets the sign.

  • Positive work: the angle is below 90∘90^\circ90∘, so the force adds energy.
  • Negative work: the angle is above 90∘90^\circ90∘, so the force removes energy.
  • Zero work: the angle is exactly 90∘90^\circ90∘, or the displacement is zero.

Common mistake

Carrying a bag at constant velocity across a level floor involves no work by your lifting force. That force points up, perpendicular to the displacement.

Key term

negative work

Work done by a force with a component opposite the displacement, so the object loses energy; 90∘<θ≤180∘90^\circ<\theta\le180^\circ90∘<θ≤180∘.

Part 3 done

4

Part 4 of 4: Common forces do positive, negative or zero work

Several familiar forces are worth sorting by their angle. In each case, the angle between that force and the displacement decides the sign. The table gives five examples.

Angle and sign of work

SituationAngleWork by that force
Pushing a cart forward0°Positive
Gravity on a falling ball0°Positive
Friction on a sliding crate180°Negative
Gravity on a rising ball180°Negative
Normal force on a sliding crate90°Zero
Situation
Pushing a cart forward
Angle
0°
Work by that force
Positive
Situation
Gravity on a falling ball
Angle
0°
Work by that force
Positive
Situation
Friction on a sliding crate
Angle
180°
Work by that force
Negative
Situation
Gravity on a rising ball
Angle
180°
Work by that force
Negative
Situation
Normal force on a sliding crate
Angle
90°
Work by that force
Zero

Worked example

Work done by friction

A constant 12 N friction force acts on a crate that slides 3.0 m across a floor. Calculate the work done by friction.
  1. 1
    Friction opposes the motion, so θ=180∘\theta=180^\circθ=180∘.
  2. 2
    Substitute: W=(12 N)(3.0 m)cos⁡180∘W=(12\,\mathrm{N})(3.0\,\mathrm{m})\cos180^\circW=(12N)(3.0m)cos180∘.
  3. 3
    Since cos⁡180∘=−1\cos180^\circ=-1cos180∘=−1, W=−36 JW=-36\,\mathrm{J}W=−36J.

Answer: The work done by friction is −36 J-36\,\mathrm{J}−36J.

The crate loses 36 J of energy to this friction. That energy does not vanish. It appears as thermal energy in the crate and the floor.

Exam tip

Always name the force when you state a value of work. Gravity and friction act on the same object but can do work with opposite signs.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what is meant by work in terms of energy.

    Show mark schemeHide mark scheme

    Model answer

    Work is the energy transferred to or from an object by a force as the object undergoes a displacement.

    • 1 mark for stating that work is a transfer of energy to or from an object
    • 1 mark for stating that it is done by a force acting through a displacement
  2. 2.Calculate[3 marks]

    Calculate the work done by a 25 N force acting 60° above the horizontal on a crate that moves 4.0 m horizontally.

    Show mark schemeHide mark scheme

    Model answer

    W=Fdcos⁡θ=(25 N)(4.0 m)cos⁡60∘=50 JW=Fd\cos\theta=(25\,\mathrm{N})(4.0\,\mathrm{m})\cos60^\circ=50\,\mathrm{J}W=Fdcosθ=(25N)(4.0m)cos60∘=50J.

    • 1 mark for using W=Fdcos⁡θW=Fd\cos\thetaW=Fdcosθ
    • 1 mark for substituting the values with the angle of 60°
    • 1 mark for obtaining 50 J50\,\mathrm{J}50J
  3. 3.Explain[3 marks]

    Explain why a person carrying a bag at constant velocity along level ground does no work on the bag.

    Show mark schemeHide mark scheme

    Model answer

    The supporting force is vertical, but the displacement is horizontal. The angle between them is 90∘90^\circ90∘, so cos⁡90∘=0\cos90^\circ=0cos90∘=0 and the work is zero. No energy is transferred to the bag by that force.

    • 1 mark for stating that the supporting force is vertical while the displacement is horizontal
    • 1 mark for stating that the angle is 90∘90^\circ90∘, so cos⁡θ=0\cos\theta=0cosθ=0
    • 1 mark for concluding that the work done is zero
  4. 4.Explain[2 marks]

    Explain why the work done by friction on a sliding crate is negative.

    Show mark schemeHide mark scheme

    Model answer

    Friction acts opposite to the displacement, so the angle is 180° and the cosine is negative. Friction removes energy from the crate.

    • 1 mark for stating that friction opposes the displacement (angle of 180°)
    • 1 mark for linking this to energy being removed from the crate
  5. 5.Calculate[2 marks]

    Calculate the work done by gravity on a 2.0 kg ball that falls 5.0 m. Use g=9.8 m/s2g=9.8\,\mathrm{m/s^2}g=9.8m/s2.

    Show mark schemeHide mark scheme

    Model answer

    Gravity acts along the motion, so W=mgd=(2.0)(9.8)(5.0)=98 JW=mgd=(2.0)(9.8)(5.0)=98\,\mathrm{J}W=mgd=(2.0)(9.8)(5.0)=98J.

    • 1 mark for using W=mgdcos⁡0∘W=mgd\cos0^\circW=mgdcos0∘ with the force equal to mgmgmg
    • 1 mark for obtaining 98 J98\,\mathrm{J}98J

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify the force that does zero work on a box sliding across a level table.
Show answer and explanation

Answer: D · Worked explanation

The normal force points straight up while the box moves horizontally. The angle between them is 90∘90^\circ90∘, and cos⁡90∘=0\cos90^\circ=0cos90∘=0, so this force does no work. Friction is tempting, but it points opposite the motion, so it does negative work on the box.
3.

Easy[1 mark]

Which statement about work is correct?
Show answer and explanation

Answer: A · Worked explanation

Work has magnitude and a sign but no direction in space, so it is a scalar. Its sign shows whether energy enters or leaves the object. The statement that work is always positive is tempting, but forces that oppose the motion do negative work and remove energy.
4.

Medium·Calculate[2 marks]

Calculate the work done by a constant 20 N force directed 60∘60^\circ60∘ above the horizontal on a cart that moves 8.0 m horizontally.
Show answer and explanation

Answer: C · Worked explanation

Use W=Fdcos⁡θ=(20)(8.0)cos⁡60∘=(160)(0.50)=80 JW=Fd\cos\theta=(20)(8.0)\cos60^\circ=(160)(0.50)=80\,\mathrm{J}W=Fdcosθ=(20)(8.0)cos60∘=(160)(0.50)=80J. The 160 J option ignores the angle and treats the whole force as acting along the motion. The 139 J option uses the sine of the angle, which would give the vertical component instead.
5.

Medium·Calculate[2 marks]

A 1500 kg car brakes to a stop over 30 m. Friction from the road is a constant 6000 N. Calculate the work done by this friction.
Show answer and explanation

Answer: B · Worked explanation

Friction opposes the motion, so θ=180∘\theta=180^\circθ=180∘ and W=(6000)(30)cos⁡180∘=−1.8×105 JW=(6000)(30)\cos180^\circ=-1.8\times10^{5}\,\mathrm{J}W=(6000)(30)cos180∘=−1.8×105J. The positive option has the wrong sign. The zero option is tempting, but the car's final speed is irrelevant: the force acted over a displacement, so it did work.
6.

Medium·Determine[2 marks]

A 10 N force acts at 120∘120^\circ120∘ to the displacement of an object that moves 2.0 m. Determine the work done by this force.
Show answer and explanation

Answer: D · Worked explanation

Use W=Fdcos⁡θ=(10)(2.0)cos⁡120∘=(20)(−0.50)=−10 JW=Fd\cos\theta=(10)(2.0)\cos120^\circ=(20)(-0.50)=-10\,\mathrm{J}W=Fdcosθ=(10)(2.0)cos120∘=(20)(−0.50)=−10J. The -17 J option uses sin⁡120∘\sin120^\circsin120∘ by mistake. The -20 J option assumes the force points directly opposite the motion at 180∘180^\circ180∘, which is not the angle given. Check the angle carefully: an angle above 90 degrees means the force has a component against the motion, so the work is negative.
7.

Medium·Calculate[2 marks]

A student lifts a 3.0 kg box 1.5 m upward at constant velocity. Calculate the work done by the student. Use g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2.
Show answer and explanation

Answer: C · Worked explanation

At constant velocity the lifting force equals the weight, mg=29.4 Nmg=29.4\,\mathrm{N}mg=29.4N. The force acts along the displacement, so W=(29.4)(1.5)=44 JW=(29.4)(1.5)=44\,\mathrm{J}W=(29.4)(1.5)=44J, positive. The -44 J option is the work done by gravity, not by the student. The 4.5 J option leaves out ggg.
8.

Hard·Determine[2 marks]

A person pushes a box 4.0 m across a floor at constant velocity. The push is 30 N horizontally, and friction is 30 N. Determine the total work done on the box by all forces.
Show answer and explanation

Answer: A · Worked explanation

The push does +120 J+120\,\mathrm{J}+120J and friction does −120 J-120\,\mathrm{J}−120J. Gravity and the normal force are perpendicular to the motion, so they do none. The total is 0 J0\,\mathrm{J}0J, which matches zero net force at constant velocity. The 120 J option counts only the push.
9.

Hard·Explain[2 marks]

A satellite moves in a circular orbit at constant speed around Earth. Which statement correctly describes the work done by gravity on the satellite?
Show answer and explanation

Answer: D · Worked explanation

In a circular orbit the gravitational force points toward the center, while the velocity is tangent to the circle. The angle is 90∘90^\circ90∘ at every instant, so the work is zero. The positive option is tempting, but a force toward Earth does not make the displacement point toward Earth.
10.

Hard·Determine[2 marks]

A 2.0 kg object slides 5.0 m down a frictionless incline that makes 30∘30^\circ30∘ with the horizontal. Determine the work done by gravity. Use g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2.
Show answer and explanation

Answer: C · Worked explanation

The weight is 19.6 N19.6\,\mathrm{N}19.6N downward, and the angle between it and the displacement is 60∘60^\circ60∘. So W=(19.6)(5.0)cos⁡60∘=49 JW=(19.6)(5.0)\cos60^\circ=49\,\mathrm{J}W=(19.6)(5.0)cos60∘=49J. The 85 J option uses cos⁡30∘\cos30^\circcos30∘ with the incline angle. The 0 J option confuses gravity with the normal force, which is the force that does no work.

Keep going

Next topic3.3 Potential energyPrevious topic3.1 Translational kinetic energy

More in Unit 3 · Work, Energy and Power

  1. 3.1Translational kinetic energyNotes · 10 questions
  2. 3.2WorkNotes · 10 questions
  3. 3.3Potential energyNotes · 10 questions
  4. 3.4Conservation of energyNotes · 10 questions
  5. 3.5PowerNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Work is energy transferred by a force
  2. 2Only the part of the force along the motion counts
  3. 3The sign of the work shows the direction of energy transfer
  4. 4Common forces do positive, negative or zero work
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe