Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›3 Work, Energy and Power
  4. ›3.3 Potential energy

AP Physics 1 · Unit 3 · Work, Energy and Power

3.3 Potential energy

Define gravitational potential energy relative to a reference level and calculate changes in it. Explain elastic potential energy in springs using Hooke's law.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Height above a chosen level sets gravitational potential energy
  1. 1Height above a chosen level sets gravitational potential energy
  2. 2Changes in potential energy do not depend on the reference level
  3. 3A spring pushes or pulls toward its natural length
  4. 4Stored elastic energy grows with squared spring displacement
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Height above a chosen level sets gravitational potential energy

Lifting a book onto a shelf takes effort. The work you do increases energy stored in the Earth-book system. This stored energy is gravitational potential energy, and it depends on the height of the book.

Near Earth's surface, Ug=mghU_g=mghUg​=mgh. Here mmm is mass, ggg is 9.8 m/s29.8\,\mathrm{m/s^2}9.8m/s2, and hhh is the height above a reference level. You choose that level, often the floor or the ground.

Heights below the reference level are negative. The potential energy is then negative too.

Common mistake

A negative potential energy does not mean negative mass or no energy. It only says the object lies below the chosen reference level.

Key terms · tap one for its definition

gravitational potential energy

Energy stored in a system of masses because of their separation; near Earth's surface Ug=mghU_g=mghUg​=mgh, in joules.

reference level

The height at which gravitational potential energy is defined to be zero; it may be chosen freely for convenience.

Part 1 done

2

Part 2 of 4: Changes in potential energy do not depend on the reference level

Suppose two students measure the same book using different reference levels. Their values of UgU_gUg​ differ. Their values for the change in UgU_gUg​ agree.

The change is ΔUg=mgΔh\Delta U_g=mg\Delta hΔUg​=mgΔh, where Δh\Delta hΔh is the final height minus the initial height. Raising an object gives a positive change. Lowering it gives a negative change.

Worked example

A falling ball

A 0.50 kg ball drops from 3.0 m above the floor to 1.0 m above the floor. Calculate the change in its gravitational potential energy.
  1. 1
    Find the height change: Δh=1.0 m−3.0 m=−2.0 m\Delta h=1.0\,\mathrm{m}-3.0\,\mathrm{m}=-2.0\,\mathrm{m}Δh=1.0m−3.0m=−2.0m.
  2. 2
    Substitute: ΔUg=(0.50 kg)(9.8 m/s2)(−2.0 m)\Delta U_g=(0.50\,\mathrm{kg})(9.8\,\mathrm{m/s^2})(-2.0\,\mathrm{m})ΔUg​=(0.50kg)(9.8m/s2)(−2.0m).
  3. 3
    Calculate: ΔUg=−9.8 J\Delta U_g=-9.8\,\mathrm{J}ΔUg​=−9.8J.

Answer: The potential energy decreases by 9.8 J, so ΔUg=−9.8 J\Delta U_g=-9.8\,\mathrm{J}ΔUg​=−9.8J.

Exam tip

Always give the sign of the change. A drop in height means a negative change in potential energy.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the expression for gravitational potential energy near Earth's surface.
Show answer and explanation

Answer: B · Worked explanation

Near the surface, the potential energy of an object is its weight mgmgmg times its height hhh above the reference level. The option with a squared height is tempting because it resembles the kinetic energy formula, but gravitational potential energy is linear in height.
3

Part 3 of 4: A spring pushes or pulls toward its natural length

A spring stores energy when you stretch or compress it. As you pull it farther from its natural length, it pulls back harder. Its natural length is its length when it is neither stretched nor compressed.

Hooke's law describes this force for a spring that behaves ideally: Fs=−kΔxF_s=-k\Delta xFs​=−kΔx. The displacement Δx\Delta xΔx is measured from the natural length. The spring constant kkk measures stiffness in N/m\mathrm{N/m}N/m. The minus sign shows that the force acts opposite to the displacement.

For a compressed spring, Δx\Delta xΔx is negative, so the spring force points outward. The law applies to both stretching and compression while the spring behaves ideally.

Figure 1. Stretch the spring and read the force. Doubling the extension doubles the force, so the stored energy grows faster than the extension.

Key terms · tap one for its definition

Hooke's law

For an ideal spring, Fs=−kΔxF_s=-k\Delta xFs​=−kΔx, where Δx\Delta xΔx is measured from the natural length.

spring constant

The constant kkk gives the spring force magnitude per unit displacement from natural length, in N/m\mathrm{N/m}N/m.

Part 3 done

4

Part 4 of 4: Stored elastic energy grows with squared spring displacement

Now that the spring force is clear, consider its stored energy. Stretching or compressing a spring stores elastic potential energy. For an ideal spring, Us=12k(Δx)2U_s=\frac{1}{2}k(\Delta x)^2Us​=21​k(Δx)2, with Δx\Delta xΔx measured from its natural length.

The energy is zero at the natural length and positive on either side. Doubling the displacement from that length quadruples the stored energy. By contrast, the magnitude of the spring force only doubles.

Worked example

Energy stored in a spring

A spring has k=200 N/mk=200\,\mathrm{N/m}k=200N/m. Calculate its stored energy at displacements of 0.10 m and 0.20 m from its natural length.
  1. 1
    At 0.10 m: Us=12(200 N/m)(0.10 m)2=1.0 JU_s=\frac{1}{2}(200\,\mathrm{N/m})(0.10\,\mathrm{m})^2=1.0\,\mathrm{J}Us​=21​(200N/m)(0.10m)2=1.0J.
  2. 2
    At 0.20 m: Us=12(200 N/m)(0.20 m)2=4.0 JU_s=\frac{1}{2}(200\,\mathrm{N/m})(0.20\,\mathrm{m})^2=4.0\,\mathrm{J}Us​=21​(200N/m)(0.20m)2=4.0J.

Answer: The spring stores 1.0 J and 4.0 J, respectively.

Gravitational and elastic potential energy both depend on a system's arrangement. Their zero points differ, as the comparison shows.

Two kinds of potential energy

FeatureGravitationalElastic
Formulamghmghmgh12k(Δx)2\frac{1}{2}k(\Delta x)^221​k(Δx)2
Zero pointChosen freelyNatural length
Depends onHeightDisplacement squared
Can be negativeYesNo
Feature
Formula
Gravitational
mghmghmgh
Elastic
12k(Δx)2\frac{1}{2}k(\Delta x)^221​k(Δx)2
Feature
Zero point
Gravitational
Chosen freely
Elastic
Natural length
Feature
Depends on
Gravitational
Height
Elastic
Displacement squared
Feature
Can be negative
Gravitational
Yes
Elastic
No

Key term

elastic potential energy

For an ideal spring, Us=12k(Δx)2U_s=\frac{1}{2}k(\Delta x)^2Us​=21​k(Δx)2, where Δx\Delta xΔx is measured from the natural length.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why the choice of reference level does not change the difference in gravitational potential energy between two heights.

    Show mark schemeHide mark scheme

    Model answer

    The change is ΔUg=mgΔh\Delta U_g=mg\Delta hΔUg​=mgΔh, which depends only on the height difference. Moving the reference level shifts both heights equally, so Δh\Delta hΔh is unchanged.

    • 1 mark for stating that ΔUg=mgΔh\Delta U_g=mg\Delta hΔUg​=mgΔh depends only on the height difference
    • 1 mark for explaining that a new reference level shifts both heights by the same amount
  2. 2.Calculate[3 marks]

    Calculate the increase in gravitational potential energy of a 4.0 kg object raised 2.5 m. Use g=9.8 m/s2g=9.8\,\mathrm{m/s^2}g=9.8m/s2.

    Show mark schemeHide mark scheme

    Model answer

    ΔUg=mgΔh=(4.0)(9.8)(2.5)=98 J\Delta U_g=mg\Delta h=(4.0)(9.8)(2.5)=98\,\mathrm{J}ΔUg​=mgΔh=(4.0)(9.8)(2.5)=98J, an increase.

    • 1 mark for using ΔUg=mgΔh\Delta U_g=mg\Delta hΔUg​=mgΔh
    • 1 mark for substituting the values correctly
    • 1 mark for obtaining 98 J98\,\mathrm{J}98J as a positive change
  3. 3.State[3 marks]

    State Hooke's law, defining each symbol you use.

    Show mark schemeHide mark scheme

    Model answer

    Fs=−kxF_s=-kxFs​=−kx, where FsF_sFs​ is the spring force, kkk is the spring constant, and xxx is the displacement from the natural length. The minus sign shows the force opposes the displacement.

    • 1 mark for writing Fs=−kxF_s=-kxFs​=−kx or stating that force is proportional to displacement
    • 1 mark for defining k as the spring constant and x as the displacement from the natural length
    • 1 mark for stating that the force opposes the displacement
  4. 4.Calculate[2 marks]

    Calculate the elastic potential energy of a spring with k=150 N/mk=150\,\mathrm{N/m}k=150N/m stretched by 0.20 m.

    Show mark schemeHide mark scheme

    Model answer

    Us=12kx2=12(150)(0.20)2=3.0 JU_s=\frac{1}{2}kx^2=\frac{1}{2}(150)(0.20)^2=3.0\,\mathrm{J}Us​=21​kx2=21​(150)(0.20)2=3.0J.

    • 1 mark for using Us=12kx2U_s=\frac{1}{2}kx^2Us​=21​kx2 with correct substitution
    • 1 mark for obtaining 3.0 J3.0\,\mathrm{J}3.0J
  5. 5.Predict[2 marks]

    Predict how the elastic potential energy of a spring changes when its stretch is tripled, and justify your answer.

    Show mark schemeHide mark scheme

    Model answer

    The energy becomes nine times larger, because UsU_sUs​ is proportional to x2x^2x2 and 32=93^2=932=9.

    • 1 mark for predicting that the energy increases by a factor of nine
    • 1 mark for justifying with Us∝x2U_s\propto x^2Us​∝x2

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the SI unit of the spring constant.
Show answer and explanation

Answer: A · Worked explanation

The spring constant is force per unit stretch, so its unit is newtons per meter. Since F=kxF=kxF=kx, dividing newtons by meters gives kkk. The newton meter is tempting, but that is the joule, the unit of energy rather than stiffness.
3.

Easy·Identify[1 mark]

Identify the expression for the energy stored in an ideal spring stretched by xxx.
Show answer and explanation

Answer: B · Worked explanation

The stored energy is the work done in stretching the spring, which gives 12kx2\frac{1}{2}kx^221​kx2. The expression kxkxkx is the spring force, not an energy. The option kx2kx^2kx2 is tempting, but it leaves out the factor of one half that comes from the force growing steadily from zero.
4.

Medium·Calculate[2 marks]

A 3.0 kg object is raised from a height of 1.0 m to a height of 5.0 m. Calculate the change in its gravitational potential energy. Use g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2.
Show answer and explanation

Answer: D · Worked explanation

The height changes by Δh=4.0 m\Delta h=4.0\,\mathrm{m}Δh=4.0m, so ΔUg=(3.0)(9.8)(4.0)≈118 J\Delta U_g=(3.0)(9.8)(4.0)\approx118\,\mathrm{J}ΔUg​=(3.0)(9.8)(4.0)≈118J. The 147 J option uses the final height of 5.0 m instead of the change. The 12 J option multiplies mass and height change but leaves out ggg. Always use the change in height, final minus initial, when the question asks for a change in energy.
5.

Medium·Calculate[2 marks]

A spring stretches 0.060 m when a 12 N force acts on it. Calculate its spring constant.
Show answer and explanation

Answer: A · Worked explanation

Use k=F/x=12/0.060=200 N m−1k=F/x=12/0.060=200\,\mathrm{N\,m^{-1}}k=F/x=12/0.060=200Nm−1. The 0.72 option multiplies force and stretch instead of dividing. The 5.0×10−35.0\times10^{-3}5.0×10−3 option divides the stretch by the force, which inverts the ratio and gives the wrong unit as well. Check the units: newtons divided by meters gives newtons per meter, the unit of a spring constant.
6.

Medium·Calculate[2 marks]

A spring with k=400 N m−1k=400\,\mathrm{N\,m^{-1}}k=400Nm−1 is compressed by 0.050 m. Calculate the elastic potential energy stored in it.
Show answer and explanation

Answer: C · Worked explanation

Use Us=12kx2=12(400)(0.050)2=0.50 JU_s=\frac{1}{2}kx^2=\frac{1}{2}(400)(0.050)^2=0.50\,\mathrm{J}Us​=21​kx2=21​(400)(0.050)2=0.50J. The 1.0 J option leaves out the factor of one half. The 20 J option is the spring force kxkxkx, which has units of newtons, not joules. The 10 J option instead multiplies the spring constant by the stretch and then by one half, which drops one factor of the stretch.
7.

Medium·Calculate[2 marks]

One student sets the floor as the reference level. Another sets a table top, 0.80 m above the floor, as the reference level. A 0.10 kg ball is 2.0 m above the floor. Calculate its gravitational potential energy for the second student. Use g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2.
Show answer and explanation

Answer: B · Worked explanation

Relative to the table top, the ball is 2.0−0.80=1.2 m2.0-0.80=1.2\,\mathrm{m}2.0−0.80=1.2m high, so Ug=(0.10)(9.8)(1.2)≈1.2 JU_g=(0.10)(9.8)(1.2)\approx1.2\,\mathrm{J}Ug​=(0.10)(9.8)(1.2)≈1.2J. The 2.0 J option is the first student's value, which uses the floor. The 0.78 J option uses only the table height.
8.

Hard·Calculate[2 marks]

A spring stretched by 0.10 m stores 2.0 J. Calculate the energy it stores when stretched by 0.30 m.
Show answer and explanation

Answer: D · Worked explanation

Stored energy is proportional to x2x^2x2. Tripling the stretch multiplies the energy by 32=93^2=932=9, so Us=9×2.0=18 JU_s=9\times2.0=18\,\mathrm{J}Us​=9×2.0=18J. The 6.0 J option wrongly treats the energy as proportional to the stretch. The 9.0 J option uses the factor but forgets the original 2.0 J.
9.

Hard·Calculate[2 marks]

A spring with k=200 N m−1k=200\,\mathrm{N\,m^{-1}}k=200Nm−1 is stretched from 0.10 m to 0.20 m. Calculate the additional energy stored.
Show answer and explanation

Answer: C · Worked explanation

The energy at 0.20 m is 4.0 J and at 0.10 m is 1.0 J, so the extra energy is 4.0−1.0=3.0 J4.0-1.0=3.0\,\mathrm{J}4.0−1.0=3.0J. The 4.0 J option is only the final energy. The 5.0 J option adds the two energies instead of subtracting them.
10.

Hard·Determine[2 marks]

A cliff top is chosen as the reference level. A 2.0 kg rock rests on the ground 10 m below it. Determine the rock's gravitational potential energy. Use g=9.8 m s−2g=9.8\,\mathrm{m\,s^{-2}}g=9.8ms−2.
Show answer and explanation

Answer: A · Worked explanation

The rock is 10 m below the reference level, so h=−10 mh=-10\,\mathrm{m}h=−10m and Ug=(2.0)(9.8)(−10)=−196 JU_g=(2.0)(9.8)(-10)=-196\,\mathrm{J}Ug​=(2.0)(9.8)(−10)=−196J. The positive option ignores that the rock lies below the chosen zero. The 0 J option wrongly assumes that the ground must always be the reference.

Keep going

Next topic3.4 Conservation of energyPrevious topic3.2 Work

More in Unit 3 · Work, Energy and Power

  1. 3.1Translational kinetic energyNotes · 10 questions
  2. 3.2WorkNotes · 10 questions
  3. 3.3Potential energyNotes · 10 questions
  4. 3.4Conservation of energyNotes · 10 questions
  5. 3.5PowerNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Height above a chosen level sets gravitational potential energy
  2. 2Changes in potential energy do not depend on the reference level
  3. 3A spring pushes or pulls toward its natural length
  4. 4Stored elastic energy grows with squared spring displacement
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe