Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›4 Linear Momentum
  4. ›4.4 Elastic and inelastic collisions

AP Physics 1 · Unit 4 · Linear Momentum

4.4 Elastic and inelastic collisions

Distinguish elastic from inelastic collisions, decide whether kinetic energy is conserved, and solve for final velocities in one dimension.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Every collision conserves momentum, but not always kinetic energy
  1. 1Every collision conserves momentum, but not always kinetic energy
  2. 2Objects that stick together lose the most kinetic energy
  3. 3Compare kinetic energy before and after to classify a collision
  4. 4Elastic collisions follow two conservation equations
  5. 5Choose the equations that match the collision type
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Every collision conserves momentum, but not always kinetic energy

A steel ball bounces off a hard floor. A lump of clay hits the same floor and stops. Both are collisions, yet they treat kinetic energy differently.

In an elastic collision, the total kinetic energy of the system is the same before and after. In an inelastic collision, some kinetic energy changes into other forms. These include thermal energy, sound, and deformation.

Common mistake

Inelastic does not mean momentum is lost. Total momentum is conserved in every isolated collision. Only the kinetic energy differs.

Key terms · tap one for its definition

elastic collision

A collision in which the total kinetic energy of the system is the same before and after.

inelastic collision

A collision in which total kinetic energy decreases, although total momentum is still conserved for an isolated system.

Part 1 done

2

Part 2 of 5: Objects that stick together lose the most kinetic energy

Clay hitting a floor shows the extreme case. When objects stick and move off together, the collision is perfectly inelastic. They share one final velocity.

This outcome loses the most kinetic energy that momentum conservation allows. The lost energy becomes thermal energy, sound, and deformation. Use momentum to find the shared velocity. Then compare the kinetic energies before and after, using K=12mv2K=\frac{1}{2}mv^2K=21​mv2. The difference shows how much energy was transformed.

Worked example

Kinetic energy lost when carts stick

A 1.5 kg cart moving at 4.0 m/s hits a 0.50 kg cart at rest. They stick together. Find the final speed and the kinetic energy lost.
  1. 1
    Momentum: (1.5)(4.0)=(1.5+0.50) v(1.5)(4.0)=(1.5+0.50)\,v(1.5)(4.0)=(1.5+0.50)v, so 6.0=2.0 v6.0=2.0\,v6.0=2.0v and v=3.0 m/sv=3.0\ \mathrm{m/s}v=3.0 m/s.
  2. 2
    Before: Ki=12(1.5)(4.0)2=12 JK_i=\frac{1}{2}(1.5)(4.0)^2=12\ \mathrm{J}Ki​=21​(1.5)(4.0)2=12 J.
  3. 3
    After: Kf=12(2.0)(3.0)2=9.0 JK_f=\frac{1}{2}(2.0)(3.0)^2=9.0\ \mathrm{J}Kf​=21​(2.0)(3.0)2=9.0 J.
  4. 4
    Lost: 12−9.0=3.0 J12-9.0=3.0\ \mathrm{J}12−9.0=3.0 J.

Answer: The final speed is 3.0 m/s3.0\ \mathrm{m/s}3.0 m/s, and 3.0 J3.0\ \mathrm{J}3.0 J of kinetic energy is lost.

Key term

perfectly inelastic

Describes a collision in which the objects stick together and move off with one common final velocity.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity, besides total momentum, that is conserved in an elastic collision.
Show answer and explanation

Answer: A · Worked explanation

An elastic collision is defined by conservation of total kinetic energy, along with momentum. Individual speeds and velocities usually change, since the objects exchange momentum and energy. Thermal energy is not conserved separately because none is produced. Momentum is conserved in both elastic and inelastic collisions, so it cannot tell them apart.
3

Part 3 of 5: Compare kinetic energy before and after to classify a collision

Given the velocities before and after, you can classify any collision. Momentum will match in an isolated system, so the test is kinetic energy.

  • Calculate the total kinetic energy before the collision.
  • Calculate the total kinetic energy after it.
  • If the two values match, the collision is elastic.
  • If the final value is smaller, the collision is inelastic.
  • A larger final value is impossible without an energy source.

Collision types compared

TypeMomentumKinetic energyObjects afterward
ElasticConservedConservedSeparate
InelasticConservedDecreasesUsually separate
Perfectly inelasticConservedDecreases the mostStick together
Type
Elastic
Momentum
Conserved
Kinetic energy
Conserved
Objects afterward
Separate
Type
Inelastic
Momentum
Conserved
Kinetic energy
Decreases
Objects afterward
Usually separate
Type
Perfectly inelastic
Momentum
Conserved
Kinetic energy
Decreases the most
Objects afterward
Stick together

Exam tip

Support a classification with calculated kinetic energies before and after, and include units.

Part 3 done

4

Part 4 of 5: Elastic collisions follow two conservation equations

Elastic collisions give extra information, since kinetic energy is also conserved. Momentum and kinetic energy together determine both final velocities in one dimension.

When the second object starts at rest, solving them gives v1f=m1−m2m1+m2v1iv_{1f}=\frac{m_1-m_2}{m_1+m_2}v_{1i}v1f​=m1​+m2​m1​−m2​​v1i​ and v2f=2m1m1+m2v1iv_{2f}=\frac{2m_1}{m_1+m_2}v_{1i}v2f​=m1​+m2​2m1​​v1i​. The objects also separate at the same relative speed at which they approached. If the masses are equal, the objects exchange velocities. These shortcuts apply only to elastic collisions.

Worked example

An elastic collision

A 2.0 kg cart moving at 3.0 m/s collides elastically with a 1.0 kg cart at rest. Find both final velocities.
  1. 1
    First cart: v1f=2.0−1.02.0+1.0(3.0)=1.0 m/sv_{1f}=\frac{2.0-1.0}{2.0+1.0}(3.0)=1.0\ \mathrm{m/s}v1f​=2.0+1.02.0−1.0​(3.0)=1.0 m/s.
  2. 2
    Second cart: v2f=2(2.0)2.0+1.0(3.0)=4.0 m/sv_{2f}=\frac{2(2.0)}{2.0+1.0}(3.0)=4.0\ \mathrm{m/s}v2f​=2.0+1.02(2.0)​(3.0)=4.0 m/s.
  3. 3
    Check momentum: 6.0=(2.0)(1.0)+(1.0)(4.0)=6.06.0=(2.0)(1.0)+(1.0)(4.0)=6.06.0=(2.0)(1.0)+(1.0)(4.0)=6.0.
  4. 4
    Check kinetic energy: 9.0 J=1.0 J+8.0 J9.0\ \mathrm{J}=1.0\ \mathrm{J}+8.0\ \mathrm{J}9.0 J=1.0 J+8.0 J.

Answer: The 2.0 kg cart moves at 1.0 m/s1.0\ \mathrm{m/s}1.0 m/s and the 1.0 kg cart at 4.0 m/s4.0\ \mathrm{m/s}4.0 m/s, both forward.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the type of collision in which objects stick together and move off with one velocity.
Show answer and explanation

Answer: C · Worked explanation

Objects that stick and move as one are perfectly inelastic. They share a common final velocity, and this outcome loses the most kinetic energy allowed by momentum conservation. An elastic collision keeps all kinetic energy, so the objects normally separate.
5

Part 5 of 5: Choose the equations that match the collision type

With three collision types, the equations you pick depend on the type. Set a positive direction first. A velocity opposite to it is negative. A negative answer then means motion in the negative direction.

  • Every isolated collision: total momentum before equals total momentum after.
  • Perfectly inelastic: both objects share one final velocity.
  • Elastic: also keep total kinetic energy, or use equal approach and separation speeds.
  • Other inelastic: one final velocity must be given or measured.

Common mistake

Do not use vf=m1v1m1+m2v_f=\frac{m_1v_1}{m_1+m_2}vf​=m1​+m2​m1​v1​​ for every collision. That form fits only objects that stick together.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Compare[3 marks]

    Compare elastic and inelastic collisions in an isolated system.

    Show mark schemeHide mark scheme

    Model answer

    Both conserve total momentum. In an elastic collision the total kinetic energy is also conserved. In an inelastic collision kinetic energy decreases, because some becomes thermal energy, sound, or deformation.

    • 1 mark for stating that both types conserve total momentum
    • 1 mark for stating that kinetic energy is conserved in an elastic collision
    • 1 mark for stating that kinetic energy decreases in an inelastic collision (transformed to other forms)
  2. 2.State[2 marks]

    State which quantities are conserved in a perfectly inelastic collision of an isolated system.

    Show mark schemeHide mark scheme

    Model answer

    Total momentum is conserved. Total kinetic energy is not conserved, because it decreases.

    • 1 mark for stating that total momentum is conserved
    • 1 mark for stating that kinetic energy is not conserved
  3. 3.Calculate[2 marks]

    Calculate the common speed when a 2.0 kg cart moving at 5.0 m/s hits a 3.0 kg cart at rest and the carts stick together.

    Show mark schemeHide mark scheme

    Model answer

    (2.0)(5.0)=(2.0+3.0)v(2.0)(5.0)=(2.0+3.0)v(2.0)(5.0)=(2.0+3.0)v, so v=105.0=2.0 m/sv=\frac{10}{5.0}=2.0\ \mathrm{m/s}v=5.010​=2.0 m/s.

    • 1 mark for equating momentum before and after using the combined mass of 5.0 kg
    • 1 mark for obtaining 2.0 m/s2.0\ \mathrm{m/s}2.0 m/s
  4. 4.Determine[3 marks]

    Determine the kinetic energy lost when a 2.0 kg cart moving at 5.0 m/s hits a 3.0 kg cart at rest and the carts stick together at 2.0 m/s.

    Show mark schemeHide mark scheme

    Model answer

    Before: 12(2.0)(5.0)2=25 J\frac{1}{2}(2.0)(5.0)^2=25\ \mathrm{J}21​(2.0)(5.0)2=25 J. After: 12(5.0)(2.0)2=10 J\frac{1}{2}(5.0)(2.0)^2=10\ \mathrm{J}21​(5.0)(2.0)2=10 J. Lost: 25−10=15 J25-10=15\ \mathrm{J}25−10=15 J.

    • 1 mark for calculating the initial kinetic energy as 25 J25\ \mathrm{J}25 J
    • 1 mark for calculating the final kinetic energy as 10 J10\ \mathrm{J}10 J
    • 1 mark for subtracting to obtain 15 J15\ \mathrm{J}15 J
  5. 5.Determine[3 marks]

    Determine whether a collision is elastic when a 1.0 kg cart moving at 6.0 m/s hits a 1.0 kg cart at rest and afterward both carts move at 3.0 m/s.

    Show mark schemeHide mark scheme

    Model answer

    Kinetic energy before is 12(1.0)(6.0)2=18 J\frac{1}{2}(1.0)(6.0)^2=18\ \mathrm{J}21​(1.0)(6.0)2=18 J. After, it is 2×12(1.0)(3.0)2=9.0 J2\times\frac{1}{2}(1.0)(3.0)^2=9.0\ \mathrm{J}2×21​(1.0)(3.0)2=9.0 J. Kinetic energy decreased, so the collision is not elastic.

    • 1 mark for calculating the kinetic energy before as 18 J18\ \mathrm{J}18 J
    • 1 mark for calculating the kinetic energy after as 9.0 J9.0\ \mathrm{J}9.0 J
    • 1 mark for concluding that the collision is inelastic, not elastic, because kinetic energy decreased

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State which quantity is conserved in every collision of an isolated system.
Show answer and explanation

Answer: D · Worked explanation

When no net external force acts, total momentum is conserved in all collisions, elastic or inelastic. Kinetic energy is conserved only in elastic collisions. Individual speeds change as the objects exchange momentum. Kinetic energy is conserved only in the special case of an elastic collision.
4.

Medium·Determine[2 marks]

A 1.0 kg cart moving at 6.0 m/s hits a 2.0 kg cart at rest, and they stick together. Determine the kinetic energy lost.
Show answer and explanation

Answer: B · Worked explanation

Momentum gives v=(1.0)(6.0)3.0=2.0 m/sv=\frac{(1.0)(6.0)}{3.0}=2.0\ \mathrm{m/s}v=3.0(1.0)(6.0)​=2.0 m/s. Kinetic energy before is 12(1.0)(36)=18 J\frac{1}{2}(1.0)(36)=18\ \mathrm{J}21​(1.0)(36)=18 J and after is 12(3.0)(4.0)=6.0 J\frac{1}{2}(3.0)(4.0)=6.0\ \mathrm{J}21​(3.0)(4.0)=6.0 J. The loss is 12 J12\ \mathrm{J}12 J. The value 6.0 J6.0\ \mathrm{J}6.0 J is the energy remaining, not lost. A quick check: the combined mass is three times larger, so the speed falls to one third.
5.

Medium·Predict[2 marks]

A 2.0 kg cart moving at 4.0 m/s makes an elastic head-on collision with an identical cart at rest. Predict the final velocities.
Show answer and explanation

Answer: D · Worked explanation

Equal masses in a one-dimensional elastic collision exchange velocities. Momentum and kinetic energy are then both conserved. Both carts at 2.0 m/s would conserve momentum but lose half the kinetic energy, since that is the stuck-together result. Check: momentum is 8.0 kg m/s8.0\ \mathrm{kg\,m/s}8.0 kgm/s before and after, and kinetic energy is 16 J16\ \mathrm{J}16 J before and after.
6.

Medium·Determine[2 marks]

A 2.0 kg cart moving at 3.0 m/s hits a 2.0 kg cart at rest. Afterward the carts move at 1.0 m/s and 2.0 m/s. Determine what kind of collision this is.
Show answer and explanation

Answer: B · Worked explanation

Momentum is 6.0 kg m/s6.0\ \mathrm{kg\,m/s}6.0 kgm/s before and 2.0+4.0=6.02.0+4.0=6.02.0+4.0=6.0 after, so it is conserved. Kinetic energy is 12(2.0)(9.0)=9.0 J\frac{1}{2}(2.0)(9.0)=9.0\ \mathrm{J}21​(2.0)(9.0)=9.0 J before and 1.0+4.0=5.0 J1.0+4.0=5.0\ \mathrm{J}1.0+4.0=5.0 J after. The decrease makes it inelastic. Conserved momentum alone does not show elasticity. An elastic collision would need 9.0 J9.0\ \mathrm{J}9.0 J after impact, but only 5.0 J5.0\ \mathrm{J}5.0 J remain.
7.

Medium·Calculate[2 marks]

A 3.0 kg cart moving at 4.0 m/s collides elastically with a 1.0 kg cart at rest. Calculate the final velocity of the 1.0 kg cart.
Show answer and explanation

Answer: C · Worked explanation

v2f=2m1m1+m2v1i=2(3.0)4.0(4.0)=6.0 m/sv_{2f}=\frac{2m_1}{m_1+m_2}v_{1i}=\frac{2(3.0)}{4.0}(4.0)=6.0\ \mathrm{m/s}v2f​=m1​+m2​2m1​​v1i​=4.02(3.0)​(4.0)=6.0 m/s. The first cart then moves at 2.0 m/s2.0\ \mathrm{m/s}2.0 m/s, and momentum is conserved: 12=6.0+6.012=6.0+6.012=6.0+6.0. The value 3.0 m/s3.0\ \mathrm{m/s}3.0 m/s is the common speed if the carts had stuck together. Check: 12 kg m/s12\ \mathrm{kg\,m/s}12 kgm/s before equals 6.0+6.06.0+6.06.0+6.0 after, and 24 J24\ \mathrm{J}24 J equals 6.0+18 J6.0+18\ \mathrm{J}6.0+18 J.
8.

Hard·Determine[2 marks]

Two 1.0 kg carts collide head-on and elastically. Cart A moves at +4.0 m/s+4.0\ \mathrm{m/s}+4.0 m/s and cart B at −2.0 m/s-2.0\ \mathrm{m/s}−2.0 m/s. Determine cart A's velocity afterward.
Show answer and explanation

Answer: A · Worked explanation

Equal masses in a one-dimensional elastic collision exchange velocities, so A leaves at −2.0 m/s-2.0\ \mathrm{m/s}−2.0 m/s and B at +4.0 m/s+4.0\ \mathrm{m/s}+4.0 m/s. Momentum is +2.0+2.0+2.0 before and after. The value +1.0 m/s+1.0\ \mathrm{m/s}+1.0 m/s is the shared velocity if the carts had stuck together. The kinetic energy is 10 J10\ \mathrm{J}10 J both before and after, as an elastic collision requires.
9.

Hard·Determine[2 marks]

Two 1.0 kg carts collide head-on. Cart A moves at +3.0 m/s+3.0\ \mathrm{m/s}+3.0 m/s and cart B is at rest. Afterward cart A moves at +0.50 m/s+0.50\ \mathrm{m/s}+0.50 m/s. Determine cart B's velocity and whether the collision is elastic.
Show answer and explanation

Answer: B · Worked explanation

Momentum gives 3.0=0.50+vB3.0=0.50+v_B3.0=0.50+vB​, so vB=+2.5 m/sv_B=+2.5\ \mathrm{m/s}vB​=+2.5 m/s. Kinetic energy before is 4.5 J4.5\ \mathrm{J}4.5 J. After, it is 0.125+3.125=3.25 J0.125+3.125=3.25\ \mathrm{J}0.125+3.125=3.25 J. Kinetic energy decreased, so the collision is inelastic. The value 3.5 m/s3.5\ \mathrm{m/s}3.5 m/s adds the velocities instead of subtracting. An elastic collision of equal masses would instead leave A at rest and B at +3.0 m/s+3.0\ \mathrm{m/s}+3.0 m/s.
10.

Hard·Calculate[2 marks]

A 2.0 kg cart moving at 6.0 m/s hits an identical cart at rest, and they stick together. Calculate the fraction of the initial kinetic energy that is lost.
Show answer and explanation

Answer: D · Worked explanation

Momentum gives v=(2.0)(6.0)4.0=3.0 m/sv=\frac{(2.0)(6.0)}{4.0}=3.0\ \mathrm{m/s}v=4.0(2.0)(6.0)​=3.0 m/s. Kinetic energy before is 12(2.0)(36)=36 J\frac{1}{2}(2.0)(36)=36\ \mathrm{J}21​(2.0)(36)=36 J and after is 12(4.0)(9.0)=18 J\frac{1}{2}(4.0)(9.0)=18\ \mathrm{J}21​(4.0)(9.0)=18 J. Half is lost. The answer of 0%0\%0% wrongly assumes that conserved momentum means conserved energy. Two equal masses that stick, with one initially at rest, always lose half of the initial kinetic energy.

Keep going

Next topic5.1 Rotational kinematicsPrevious topic4.3 Conservation of linear momentum

More in Unit 4 · Linear Momentum

  1. 4.1Linear momentumNotes · 9 questions
  2. 4.2Change in momentum and impulseNotes · 10 questions
  3. 4.3Conservation of linear momentumNotes · 10 questions
  4. 4.4Elastic and inelastic collisionsNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Every collision conserves momentum, but not always kinetic energy
  2. 2Objects that stick together lose the most kinetic energy
  3. 3Compare kinetic energy before and after to classify a collision
  4. 4Elastic collisions follow two conservation equations
  5. 5Choose the equations that match the collision type
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe