Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›5 Torque and Rotational Dynamics
  4. ›5.1 Rotational kinematics

AP Physics 1 · Unit 5 · Torque and Rotational Dynamics

5.1 Rotational kinematics

Describe angular displacement, velocity, and acceleration, convert between angular and linear variables, and solve constant-angular-acceleration problems.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Angular displacement measures how far an object has turned
  1. 1Angular displacement measures how far an object has turned
  2. 2Angular velocity and acceleration describe how fast the turn changes
  3. 3The radius links angular quantities to linear ones
  4. 4Constant angular acceleration follows the linear kinematic pattern
  5. 5Solve rotation problems by listing knowns and choosing one equation
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Angular displacement measures how far an object has turned

A wheel on a car turns about a fixed axle. Each point on it moves in a circle around the axle. We track the turn with an angle, not a distance.

The angular displacement Δθ\Delta\thetaΔθ is the change in angle of a line fixed to the object. Its SI unit is the radian. One radian is the angle at which the arc length equals the radius.

A full turn is 2π2\pi2π rad, which equals 360° or one revolution. To convert degrees to radians, multiply by π180\frac{\pi}{180}180π​. Counterclockwise is usually taken as positive.

Key terms · tap one for its definition

angular displacement

The change in angular position of a rotating object, measured in radians; counterclockwise is usually positive.

radian

The SI unit of angle: the angle at the center of a circle subtended by an arc equal in length to the radius.

Part 1 done

2

Part 2 of 5: Angular velocity and acceleration describe how fast the turn changes

Next we ask how quickly an object turns, just as velocity describes how fast position changes. The average angular velocity is ωavg=ΔθΔt\omega_{\mathrm{avg}}=\frac{\Delta\theta}{\Delta t}ωavg​=ΔtΔθ​. Instantaneous angular velocity is dθ/dtd\theta/dtdθ/dt. Its unit is rad/s. A positive value means counterclockwise turning under the usual convention.

The average angular acceleration is αavg=ΔωΔt\alpha_{\mathrm{avg}}=\frac{\Delta\omega}{\Delta t}αavg​=ΔtΔω​. Instantaneous angular acceleration is dω/dtd\omega/dtdω/dt. Its unit is rad/s2\mathrm{rad/s^2}rad/s2. Frequency links in as ω=2πf\omega=2\pi fω=2πf. Motors often quote revolutions per minute, so convert before calculating.

Worked example

Converting rpm to rad/s

A fan spins at 120 revolutions per minute. Find its angular velocity in rad/s.
  1. 1
    Convert to revolutions per second: 120 rev60 s=2.0 rev/s\frac{120\ \mathrm{rev}}{60\ \mathrm{s}}=2.0\ \mathrm{rev/s}60 s120 rev​=2.0 rev/s.
  2. 2
    Each revolution is 2π2\pi2π rad: ω=2.0×2π=4π rad/s\omega=2.0\times2\pi=4\pi\ \mathrm{rad/s}ω=2.0×2π=4π rad/s.
  3. 3
    Evaluate: 4π≈12.6 rad/s4\pi\approx12.6\ \mathrm{rad/s}4π≈12.6 rad/s.

Answer: The angular velocity is about 12.6 rad/s12.6\ \mathrm{rad/s}12.6 rad/s.

Key terms · tap one for its definition

angular velocity

The rate of change of angular position, ω=ΔθΔt\omega=\frac{\Delta\theta}{\Delta t}ω=ΔtΔθ​, measured in rad/s\mathrm{rad/s}rad/s.

angular acceleration

The rate of change of angular velocity, α=ΔωΔt\alpha=\frac{\Delta\omega}{\Delta t}α=ΔtΔω​, measured in rad/s2\mathrm{rad/s^2}rad/s2.

Part 2 done

Quick check

One question on the part you just read

Easy

State the SI unit of angular velocity.
Show answer and explanation

Answer: B · Worked explanation

Angular velocity is angle divided by time, and the SI unit of angle is the radian, so the unit is rad/s\mathrm{rad/s}rad/s. The unit rad/s2\mathrm{rad/s^2}rad/s2 belongs to angular acceleration. The unit m/s\mathrm{m/s}m/s measures linear speed. The radian is written to show that the quantity describes an angle turned each second.
3

Part 3 of 5: The radius links angular quantities to linear ones

A point on the rim of a wheel also moves along a circle, so it has linear values too. Turning through angle θ\thetaθ moves a point at radius rrr along an arc of length s=rθs=r\thetas=rθ. This requires θ\thetaθ in radians.

Dividing by time gives the tangential speed, v=rωv=r\omegav=rω. A speed that changes gives the tangential acceleration, at=rαa_t=r\alphaat​=rα. Tangential velocity and tangential acceleration point along the tangent. All points on a rigid object share the same ω\omegaω and α\alphaα.

Figure 1. The arc length s grows with the angle and the radius. The speed of the point is tangent to its circular path.

Worked example

Rim speed and acceleration

A wheel of radius 0.30 m turns at 10 rad/s and speeds up at 2.0 rad/s2^22. Find the tangential speed and tangential acceleration of the rim.
  1. 1
    Speed: v=rω=(0.30)(10)=3.0 m/sv=r\omega=(0.30)(10)=3.0\ \mathrm{m/s}v=rω=(0.30)(10)=3.0 m/s.
  2. 2
    Acceleration: at=rα=(0.30)(2.0)=0.60 m/s2a_t=r\alpha=(0.30)(2.0)=0.60\ \mathrm{m/s^2}at​=rα=(0.30)(2.0)=0.60 m/s2.

Answer: The rim moves at 3.0 m/s3.0\ \mathrm{m/s}3.0 m/s with a tangential acceleration of 0.60 m/s20.60\ \mathrm{m/s^2}0.60 m/s2.

Exam tip

In v=rωv=r\omegav=rω, the radian drops out of the units, leaving m/s\mathrm{m/s}m/s. Write the final unit as m/s, not rad m/s.

Key terms · tap one for its definition

tangential speed

The speed of a point along its circular path, equal to r∣ω∣r|\omega|r∣ω∣; its velocity points along the tangent.

tangential acceleration

The rate of change of a point's tangential speed, equal to rαr\alpharα and directed along the tangent.

Part 3 done

4

Part 4 of 5: Constant angular acceleration follows the linear kinematic pattern

When α\alphaα is constant, the rotational kinematic equations mirror the linear kinematic equations for constant acceleration. Replace linear displacement, velocity, and acceleration with θ\thetaθ, ω\omegaω, and α\alphaα.

  • Velocity from time: ω=ω0+αt\omega=\omega_0+\alpha tω=ω0​+αt
  • Displacement from time: Δθ=ω0t+12αt2\Delta\theta=\omega_0t+\frac{1}{2}\alpha t^2Δθ=ω0​t+21​αt2
  • Velocity from displacement: ω2=ω02+2αΔθ\omega^2=\omega_0^2+2\alpha\Delta\thetaω2=ω02​+2αΔθ
  • Displacement from average velocity: Δθ=12(ω0+ω)t\Delta\theta=\frac{1}{2}(\omega_0+\omega)tΔθ=21​(ω0​+ω)t

Here, ω0\omega_0ω0​ is the initial angular velocity, and Δθ\Delta\thetaΔθ is the angle turned. Each equation leaves out one quantity. Choose the equation that omits what you neither know nor need.

Common mistake

These equations require constant α\alphaα. Convert angles to radians and time to seconds before substituting values.

Key term

rotational kinematic equations

Equations relating θ\thetaθ, ω\omegaω, α\alphaα, and ttt for rotation with constant angular acceleration.

Part 4 done

Quick check

One question on the part you just read

Easy

State the angular displacement, in radians, of one full revolution.
Show answer and explanation

Answer: D · Worked explanation

One radian subtends an arc equal to the radius. The full circumference is 2πr2\pi r2πr, so a full turn is 2π2\pi2π rad, about 6.28 rad. The number 360 is the angle in degrees, not radians. Half a turn is π\piπ rad and a quarter turn is π2\frac{\pi}{2}2π​ rad.
5

Part 5 of 5: Solve rotation problems by listing knowns and choosing one equation

Now apply the equations to a numerical problem. List the known quantities with units and convert to radians and seconds. Then choose the equation that holds the unknown and no other unknowns. If two unknowns remain, solve for one first.

Worked example

Constant angular acceleration

A disk starts from rest and has α=4.0 rad/s2\alpha=4.0\ \mathrm{rad/s^2}α=4.0 rad/s2 for 3.0 s. Find its final angular velocity, the angle turned in revolutions, and the speed of a point 0.50 m from the axis.
  1. 1
    Final angular velocity: ω=0+(4.0)(3.0)=12 rad/s\omega=0+(4.0)(3.0)=12\ \mathrm{rad/s}ω=0+(4.0)(3.0)=12 rad/s.
  2. 2
    Angle: θ=12(4.0)(3.0)2=18 rad\theta=\frac{1}{2}(4.0)(3.0)^2=18\ \mathrm{rad}θ=21​(4.0)(3.0)2=18 rad.
  3. 3
    Revolutions: 182π≈2.9 rev\frac{18}{2\pi}\approx2.9\ \mathrm{rev}2π18​≈2.9 rev.
  4. 4
    Speed: v=rω=(0.50)(12)=6.0 m/sv=r\omega=(0.50)(12)=6.0\ \mathrm{m/s}v=rω=(0.50)(12)=6.0 m/s.

Answer: ω=12 rad/s\omega=12\ \mathrm{rad/s}ω=12 rad/s, θ=18 rad≈2.9\theta=18\ \mathrm{rad}\approx2.9θ=18 rad≈2.9 revolutions, and v=6.0 m/sv=6.0\ \mathrm{m/s}v=6.0 m/s.

Check the result for sense. A positive α\alphaα from rest should give positive ω\omegaω and θ\thetaθ. Convert to revolutions only at the end, because the equations need radians. The final speed in m/s is a useful second check.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[2 marks]

    Calculate the angular velocity, in rad/s, of a wheel turning at 300 revolutions per minute.

    Show mark schemeHide mark scheme

    Model answer

    300 rev/min is 5.0 rev/s. Then ω=5.0×2π=10π≈31 rad/s\omega=5.0\times2\pi=10\pi\approx31\ \mathrm{rad/s}ω=5.0×2π=10π≈31 rad/s.

    • 1 mark for converting 300 rev/min to 5.0 rev/s
    • 1 mark for multiplying by 2π2\pi2π to obtain about 31 rad/s31\ \mathrm{rad/s}31 rad/s
  2. 2.State[1 mark]

    State the SI unit of angular acceleration.

    Show mark schemeHide mark scheme

    Model answer

    The unit is rad/s2\mathrm{rad/s^2}rad/s2.

    • 1 mark for stating rad/s2\mathrm{rad/s^2}rad/s2
  3. 3.Explain[3 marks]

    Explain why two points at different distances from the axis of a spinning disk have the same angular velocity but different tangential speeds.

    Show mark schemeHide mark scheme

    Model answer

    All points on a rigid disk turn through the same angle in the same time, so they share one angular velocity. Tangential speed is v=rωv=r\omegav=rω. A point farther from the axis has a larger rrr, so it moves faster.

    • 1 mark for stating that all points turn through the same angle in the same time
    • 1 mark for using v=rωv=r\omegav=rω
    • 1 mark for linking larger radius to larger tangential speed
  4. 4.Calculate[4 marks]

    Calculate the final angular velocity and angular displacement of a wheel that starts from rest and accelerates uniformly at 2.5 rad/s2^22 for 4.0 s.

    Show mark schemeHide mark scheme

    Model answer

    ω=ω0+αt=(2.5)(4.0)=10 rad/s\omega=\omega_0+\alpha t=(2.5)(4.0)=10\ \mathrm{rad/s}ω=ω0​+αt=(2.5)(4.0)=10 rad/s. θ=12αt2=12(2.5)(4.0)2=20 rad\theta=\frac{1}{2}\alpha t^2=\frac{1}{2}(2.5)(4.0)^2=20\ \mathrm{rad}θ=21​αt2=21​(2.5)(4.0)2=20 rad.

    • 1 mark for using ω=ω0+αt\omega=\omega_0+\alpha tω=ω0​+αt
    • 1 mark for obtaining 10 rad/s10\ \mathrm{rad/s}10 rad/s
    • 1 mark for using θ=ω0t+12αt2\theta=\omega_0 t+\frac{1}{2}\alpha t^2θ=ω0​t+21​αt2
    • 1 mark for obtaining 20 rad20\ \mathrm{rad}20 rad
  5. 5.Calculate[2 marks]

    Calculate the tangential speed of a point 0.25 m from the axis of a disk turning at 8.0 rad/s.

    Show mark schemeHide mark scheme

    Model answer

    v=rω=(0.25)(8.0)=2.0 m/sv=r\omega=(0.25)(8.0)=2.0\ \mathrm{m/s}v=rω=(0.25)(8.0)=2.0 m/s.

    • 1 mark for using v=rωv=r\omegav=rω
    • 1 mark for obtaining 2.0 m/s2.0\ \mathrm{m/s}2.0 m/s

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the relationship between tangential speed vvv, radius rrr, and angular velocity ω\omegaω.
Show answer and explanation

Answer: A · Worked explanation

Arc length is s=rθs=r\thetas=rθ, and dividing by time gives v=rωv=r\omegav=rω. Tangential speed rises in proportion to both radius and angular velocity. The form ωr\frac{\omega}{r}rω​ has the wrong units for a speed. A quick check: doubling either rrr or ω\omegaω should double the speed, and rωr\omegarω does that.
4.

Medium·Calculate[2 marks]

A wheel turns through 3.0 revolutions. Calculate its angular displacement in radians.
Show answer and explanation

Answer: C · Worked explanation

Each revolution is 2π2\pi2π rad, so θ=3.0×2π=6π≈19 rad\theta=3.0\times2\pi=6\pi\approx19\ \mathrm{rad}θ=3.0×2π=6π≈19 rad. The value 9.4 uses 3π3\pi3π and forgets that a revolution is 2π2\pi2π. The value 1080 is the angle in degrees, not radians. Always check whether the angle is requested in radians or degrees before converting.
5.

Medium·Calculate[2 marks]

A turntable rotates at 60 revolutions per minute. Calculate its angular velocity.
Show answer and explanation

Answer: A · Worked explanation

60 rev/min is 1.0 rev/s. Multiplying by 2π2\pi2π rad per revolution gives ω=2π≈6.3 rad/s\omega=2\pi\approx6.3\ \mathrm{rad/s}ω=2π≈6.3 rad/s. The value 1.0 leaves out the conversion from revolutions to radians. The value 380 multiplies 60 by 2π2\pi2π without converting minutes. A turntable at 60 rpm completes one turn each second, which is a handy check.
6.

Medium·Calculate[2 marks]

A point 0.40 m from the axis of a disk has angular velocity 5.0 rad/s. Calculate its tangential speed.
Show answer and explanation

Answer: D · Worked explanation

v=rω=(0.40)(5.0)=2.0 m/sv=r\omega=(0.40)(5.0)=2.0\ \mathrm{m/s}v=rω=(0.40)(5.0)=2.0 m/s. The value 12.5 divides ω\omegaω by rrr. The value 0.080 divides rrr by ω\omegaω. Neither has the correct form for tangential speed. Meters times radians per second gives meters per second, because the radian drops out. A quick estimate agrees: 0.4 times 5 is 2.
7.

Medium·Calculate[2 marks]

A wheel starts from rest with a constant angular acceleration of 3.0 rad/s23.0\ \mathrm{rad/s^2}3.0 rad/s2. Calculate its angular displacement after 4.0 s.
Show answer and explanation

Answer: B · Worked explanation

From rest, θ=12αt2=12(3.0)(4.0)2=24 rad\theta=\frac{1}{2}\alpha t^2=\frac{1}{2}(3.0)(4.0)^2=24\ \mathrm{rad}θ=21​αt2=21​(3.0)(4.0)2=24 rad. The value 48 leaves out the factor of one half. The value 12 is the final angular velocity in rad/s, not the angle turned. As a check, the average angular velocity is 6.0 rad/s over 4.0 s, which gives 24 rad.
8.

Hard·Calculate[2 marks]

A disk turns at 20 rad/s and slows uniformly with α=−4.0 rad/s2\alpha=-4.0\ \mathrm{rad/s^2}α=−4.0 rad/s2 until it stops. Calculate the angle it turns through while stopping.
Show answer and explanation

Answer: C · Worked explanation

Use ω2=ω02+2αθ\omega^2=\omega_0^2+2\alpha\thetaω2=ω02​+2αθ: 0=400+2(−4.0)θ0=400+2(-4.0)\theta0=400+2(−4.0)θ, so θ=50 rad\theta=50\ \mathrm{rad}θ=50 rad. The value 100 comes from ω0t\omega_0 tω0​t with t=5.0 st=5.0\ \mathrm{s}t=5.0 s, which ignores the slowing. Average angular velocity is only 10 rad/s. The stopping time is 5.0 s, so the angle is that time multiplied by the average of 10 rad/s.
9.

Hard·Compare[2 marks]

A disk turns at 10 rad/s. Point A is 0.10 m from the axis and point B is 0.30 m from it. Compare the two points.
Show answer and explanation

Answer: A · Worked explanation

Every point on a rigid disk shares the same angular velocity. Tangential speeds are vA=(0.10)(10)=1.0 m/sv_A=(0.10)(10)=1.0\ \mathrm{m/s}vA​=(0.10)(10)=1.0 m/s and vB=(0.30)(10)=3.0 m/sv_B=(0.30)(10)=3.0\ \mathrm{m/s}vB​=(0.30)(10)=3.0 m/s. The equal-speed option confuses equal angular velocity with equal linear speed. Tripling the radius triples the tangential speed while the angular velocity stays the same.
10.

Hard·Calculate[2 marks]

A wheel of radius 0.50 m speeds up uniformly from rest to 6.0 rad/s in 3.0 s. Calculate the tangential acceleration of a point on its rim.
Show answer and explanation

Answer: D · Worked explanation

The angular acceleration is α=6.03.0=2.0 rad/s2\alpha=\frac{6.0}{3.0}=2.0\ \mathrm{rad/s^2}α=3.06.0​=2.0 rad/s2. Then at=rα=(0.50)(2.0)=1.0 m/s2a_t=r\alpha=(0.50)(2.0)=1.0\ \mathrm{m/s^2}at​=rα=(0.50)(2.0)=1.0 m/s2. The value 2.0 is α\alphaα itself, and 4.0 divides by the radius instead of multiplying. Units confirm it: meters times radians per second squared gives meters per second squared.

Keep going

Next topic5.2 Linear and rotational motionPrevious topic4.4 Elastic and inelastic collisions

More in Unit 5 · Torque and Rotational Dynamics

  1. 5.1Rotational kinematicsNotes · 10 questions
  2. 5.2Linear and rotational motionNotes · 10 questions
  3. 5.3TorqueNotes · 10 questions
  4. 5.4Rotational inertiaNotes · 10 questions
  5. 5.5Rotational equilibriumNotes · 10 questions
  6. 5.6Newton's second law for rotationNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Angular displacement measures how far an object has turned
  2. 2Angular velocity and acceleration describe how fast the turn changes
  3. 3The radius links angular quantities to linear ones
  4. 4Constant angular acceleration follows the linear kinematic pattern
  5. 5Solve rotation problems by listing knowns and choosing one equation
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe