Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›7 Oscillations
  4. ›7.4 Energy of simple harmonic oscillators

AP Physics 1 · Unit 7 · Oscillations

7.4 Energy of simple harmonic oscillators

Explain how energy transfers between kinetic and potential forms in simple harmonic motion, and use amplitude to calculate total energy.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Energy moves between kinetic and potential forms during each cycle
  1. 1Energy moves between kinetic and potential forms during each cycle
  2. 2Total mechanical energy stays constant in an ideal oscillator
  3. 3Amplitude sets the total energy through a squared relationship
  4. 4Energy conservation gives the speed at any position
  5. 5A pendulum and real oscillators follow the same energy pattern
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Energy moves between kinetic and potential forms during each cycle

Watch a mass on a spring. It stops at the ends of its path and moves fastest near the middle. Its energy changes form, and none is lost if friction is ignored.

The farthest displacement from equilibrium is the amplitude, AAA. At that point the mass is momentarily at rest. Its energy is stored in the spring as elastic potential energy, UsU_sUs​.

For a horizontal spring, equilibrium is at its unstretched length and the mass moves fastest. Its energy there is all kinetic energy, the energy of motion.

Key terms · tap one for its definition

amplitude

The maximum magnitude of displacement from the equilibrium position, measured in meters.

elastic potential energy

Energy stored in a stretched or compressed spring, Us=12kx2U_s=\frac{1}{2}kx^2Us​=21​kx2, where xxx is measured from equilibrium.

kinetic energy

Energy of motion, equal to 12mv2\frac{1}{2}mv^221​mv2 for an object of mass mmm and speed vvv.

Part 1 done

2

Part 2 of 5: Total mechanical energy stays constant in an ideal oscillator

Now add the two forms together. For the spring oscillator, their sum is the total mechanical energy, E=K+UsE=K+U_sE=K+Us​. With no friction or air resistance, EEE stays constant.

As the mass moves toward equilibrium, KKK rises and UsU_sUs​ falls by the same amount. Moving away reverses the exchange. At a turning point, K=0K=0K=0, so E=UsE=U_sE=Us​ there.

Common mistake

Total energy is not zero at equilibrium. Spring potential energy is zero there, but all the energy is kinetic.

Key term

total mechanical energy

The sum of kinetic and potential energy; for an ideal spring oscillator, E=K+UsE=K+U_sE=K+Us​ remains constant.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the form of the energy of a spring-mass oscillator at maximum displacement.
Show answer and explanation

Answer: B · Worked explanation

At maximum displacement the mass is momentarily at rest, so its kinetic energy is zero. All of the energy is stored in the spring as elastic potential energy. The no-energy option is tempting because the mass stops, but stopping does not remove the stored energy.
3

Part 3 of 5: Amplitude sets the total energy through a squared relationship

Spring potential energy is Us=12kx2U_s=\frac{1}{2}kx^2Us​=21​kx2, where xxx is measured from equilibrium. At the turning point, x=Ax=Ax=A and K=0K=0K=0. The total energy is therefore E=12kA2E=\frac{1}{2}kA^2E=21​kA2.

Energy depends on the square of the amplitude. Doubling the amplitude makes the energy four times larger. Tripling it makes the energy nine times larger.

The spring constant sets the size of the stored energy. A stiffer spring stores more energy at the same amplitude.

Figure 1. The potential energy forms a parabola. The kinetic energy is whatever remains, so the total stays constant.

Worked example

Energy and top speed

A 0.50 kg mass oscillates on a spring with k=200 N/mk=200\ \mathrm{N/m}k=200 N/m and amplitude 0.10 m0.10\ \mathrm{m}0.10 m. Find the total energy and the maximum speed.
  1. 1
    Use E=12kA2=12(200)(0.10)2E=\frac{1}{2}kA^2=\frac{1}{2}(200)(0.10)^2E=21​kA2=21​(200)(0.10)2.
  2. 2
    Calculate: E=1.0 JE=1.0\ \mathrm{J}E=1.0 J.
  3. 3
    At equilibrium all the energy is kinetic: 12mvmax2=1.0 J\frac{1}{2}mv_{max}^2=1.0\ \mathrm{J}21​mvmax2​=1.0 J.
  4. 4
    Solve: vmax=2(1.0)0.50=2.0 m/sv_{max}=\sqrt{\frac{2(1.0)}{0.50}}=2.0\ \mathrm{m/s}vmax​=0.502(1.0)​​=2.0 m/s.

Answer: The total energy is 1.0 J1.0\ \mathrm{J}1.0 J and the maximum speed is 2.0 m/s2.0\ \mathrm{m/s}2.0 m/s.

Part 3 done

4

Part 4 of 5: Energy conservation gives the speed at any position

Between the ends, the mass has both kinds of energy. Set the total equal to their sum: 12kA2=12mv2+12kx2\frac{1}{2}kA^2=\frac{1}{2}mv^2+\frac{1}{2}kx^221​kA2=21​mv2+21​kx2. Solve for vvv to find the speed at any displacement.

At the ends, all the energy is spring potential energy and the speed is zero. At the center, all the energy is kinetic and the speed is greatest.

How energy is shared at three positions

PositionKKKUsU_sUs​
x=±Ax=\pm Ax=±A012kA2\frac{1}{2}kA^221​kA2
x=±A2x=\pm\frac{A}{2}x=±2A​34E\frac{3}{4}E43​E14E\frac{1}{4}E41​E
x=0x=0x=012kA2\frac{1}{2}kA^221​kA20
Position
x=±Ax=\pm Ax=±A
KKK
0
UsU_sUs​
12kA2\frac{1}{2}kA^221​kA2
Position
x=±A2x=\pm\frac{A}{2}x=±2A​
KKK
34E\frac{3}{4}E43​E
UsU_sUs​
14E\frac{1}{4}E41​E
Position
x=0x=0x=0
KKK
12kA2\frac{1}{2}kA^221​kA2
UsU_sUs​
0

Worked example

Speed at a given position

Use the oscillator above, with m=0.50 kgm=0.50\ \mathrm{kg}m=0.50 kg, k=200 N/mk=200\ \mathrm{N/m}k=200 N/m and E=1.0 JE=1.0\ \mathrm{J}E=1.0 J. Find the speed at x=0.060 mx=0.060\ \mathrm{m}x=0.060 m.
  1. 1
    Find the spring potential energy: Us=12(200)(0.060)2=0.36 JU_s=\frac{1}{2}(200)(0.060)^2=0.36\ \mathrm{J}Us​=21​(200)(0.060)2=0.36 J.
  2. 2
    Find the kinetic energy: K=E−Us=1.0−0.36=0.64 JK=E-U_s=1.0-0.36=0.64\ \mathrm{J}K=E−Us​=1.0−0.36=0.64 J.
  3. 3
    Solve: v=2(0.64)0.50=2.56v=\sqrt{\frac{2(0.64)}{0.50}}=\sqrt{2.56}v=0.502(0.64)​​=2.56​.
  4. 4
    Calculate: v=1.6 m/sv=1.6\ \mathrm{m/s}v=1.6 m/s.

Answer: The speed is 1.6 m/s1.6\ \mathrm{m/s}1.6 m/s.

Exam tip

Write E=K+UsE=K+U_sE=K+Us​ and state that energy is conserved before substituting. Mention the assumption of no friction.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the expression for the total energy of a spring-mass oscillator with amplitude AAA.
Show answer and explanation

Answer: A · Worked explanation

At the turning point all the energy is elastic potential energy, 12kx2\frac{1}{2}kx^221​kx2 with x=Ax=Ax=A, giving 12kA2\frac{1}{2}kA^221​kA2. The form kA2kA^2kA2 leaves out the factor of one half. The form 12kA\frac{1}{2}kA21​kA is the product of a force and a half, not an energy.
5

Part 5 of 5: A pendulum and real oscillators follow the same energy pattern

A pendulum bob also trades energy. At its highest point it is momentarily at rest and has maximum gravitational potential energy. At its lowest point it has maximum kinetic energy.

Suppose the bob rises a height hhh above its lowest point. Then mgh=12mv2mgh=\frac{1}{2}mv^2mgh=21​mv2 gives its speed at the bottom. The mass cancels, so v=2ghv=\sqrt{2gh}v=2gh​.

Real oscillators lose energy to friction and air resistance. This damping gradually reduces the amplitude. Because EEE depends on A2A^2A2, a small drop in amplitude means a larger fractional drop in energy.

Key term

damping

The gradual loss of an oscillator's mechanical energy to friction or air resistance, which reduces its amplitude.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe the energy changes as a spring-mass oscillator moves from maximum displacement to equilibrium.

    Show mark schemeHide mark scheme

    Model answer

    Potential energy decreases while kinetic energy increases. At equilibrium the potential energy is zero and the kinetic energy is at its maximum. The total stays constant if there is no friction.

    • 1 mark for stating that potential energy decreases
    • 1 mark for stating that kinetic energy increases to a maximum at equilibrium
    • 1 mark for stating that the total energy stays constant without friction
  2. 2.Calculate[4 marks]

    Calculate the total energy and the maximum speed of a 0.60 kg mass oscillating on a spring with k=150 N/mk=150\ \mathrm{N/m}k=150 N/m and amplitude 0.20 m0.20\ \mathrm{m}0.20 m.

    Show mark schemeHide mark scheme

    Model answer

    E=12kA2=12(150)(0.20)2=3.0 JE=\frac{1}{2}kA^2=\frac{1}{2}(150)(0.20)^2=3.0\ \mathrm{J}E=21​kA2=21​(150)(0.20)2=3.0 J. At equilibrium 12mv2=3.0 J\frac{1}{2}mv^2=3.0\ \mathrm{J}21​mv2=3.0 J, so v=2(3.0)0.60=3.2 m/sv=\sqrt{\frac{2(3.0)}{0.60}}=3.2\ \mathrm{m/s}v=0.602(3.0)​​=3.2 m/s.

    • 1 mark for using E=12kA2E=\frac{1}{2}kA^2E=21​kA2
    • 1 mark for obtaining 3.0 J3.0\ \mathrm{J}3.0 J
    • 1 mark for equating the maximum kinetic energy to EEE
    • 1 mark for obtaining 3.2 m/s3.2\ \mathrm{m/s}3.2 m/s
  3. 3.Predict[2 marks]

    Predict the effect on the total energy of tripling the amplitude of an oscillator.

    Show mark schemeHide mark scheme

    Model answer

    The total energy is proportional to A2A^2A2. Tripling the amplitude therefore makes the total energy nine times larger.

    • 1 mark for stating that EEE is proportional to A2A^2A2
    • 1 mark for concluding that the energy increases by a factor of nine
  4. 4.Explain[2 marks]

    Explain why the total energy of an oscillator is not zero at the equilibrium position.

    Show mark schemeHide mark scheme

    Model answer

    At equilibrium the potential energy is zero, but the mass is moving at its greatest speed. All of the total energy is kinetic, so it is not zero.

    • 1 mark for stating that the potential energy is zero at equilibrium
    • 1 mark for stating that the mass has maximum kinetic energy there
  5. 5.Explain[3 marks]

    Explain how energy changes in a pendulum between its highest and lowest points.

    Show mark schemeHide mark scheme

    Model answer

    At the highest point the bob is momentarily at rest, with maximum gravitational potential energy. As it falls, potential energy becomes kinetic energy. At the lowest point the kinetic energy is greatest.

    • 1 mark for stating that the bob has maximum gravitational potential energy at the highest point
    • 1 mark for stating that potential energy converts to kinetic energy as it falls
    • 1 mark for stating that kinetic energy is greatest at the lowest point

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the quantity that stays constant for an ideal oscillator with no friction.
Show answer and explanation

Answer: D · Worked explanation

Without friction, the sum K+UK+UK+U is constant, so the total mechanical energy stays the same. Kinetic energy and potential energy each change as the mass moves. Speed changes too, rising toward equilibrium and falling to zero at the turning points. Speed is not conserved, since it changes throughout the motion.
4.

Medium·Calculate[2 marks]

Calculate the total energy of a spring with k=80 N/mk=80\ \mathrm{N/m}k=80 N/m and an oscillation amplitude of 0.25 m0.25\ \mathrm{m}0.25 m.
Show answer and explanation

Answer: C · Worked explanation

Use E=12kA2=12(80)(0.25)2=2.5 JE=\frac{1}{2}kA^2=\frac{1}{2}(80)(0.25)^2=2.5\ \mathrm{J}E=21​kA2=21​(80)(0.25)2=2.5 J. The value 5.0 is kA2kA^2kA2 with the half omitted. The value 20 is kAkAkA, which is a force in newtons, not an energy. Square the amplitude first, 0.252=0.06250.25^2=0.06250.252=0.0625, then multiply by 40 to avoid slips. Forgetting the half is the common slip.
5.

Medium·Calculate[2 marks]

An oscillator with amplitude 0.050 m0.050\ \mathrm{m}0.050 m has total energy 0.40 J0.40\ \mathrm{J}0.40 J. Calculate its total energy if the amplitude is changed to 0.10 m0.10\ \mathrm{m}0.10 m with the same spring.
Show answer and explanation

Answer: B · Worked explanation

Energy is proportional to A2A^2A2. Doubling the amplitude multiplies the energy by four, so E=4(0.40)=1.6 JE=4(0.40)=1.6\ \mathrm{J}E=4(0.40)=1.6 J. The value 0.80 treats the energy as directly proportional to amplitude, which ignores the square. As a check, a bigger swing stores far more energy, so a fourfold increase is sensible.
6.

Medium·Calculate[2 marks]

At x=A2x=\frac{A}{2}x=2A​, calculate the fraction of the total energy that is kinetic.
Show answer and explanation

Answer: A · Worked explanation

The potential energy is 12k(A2)2=14E\frac{1}{2}k\left(\frac{A}{2}\right)^2=\frac{1}{4}E21​k(2A​)2=41​E. The rest is kinetic, so K=34EK=\frac{3}{4}EK=43​E. The value 14\frac{1}{4}41​ is the potential fraction, and 12\frac{1}{2}21​ wrongly assumes energy splits evenly halfway. As a check, the kinetic and potential fractions must add to one, and 34+14=1\frac{3}{4}+\frac{1}{4}=143​+41​=1 confirms the result.
7.

Medium·Calculate[2 marks]

A 2.0 kg2.0\ \mathrm{kg}2.0 kg mass passes through equilibrium at 3.0 m/s3.0\ \mathrm{m/s}3.0 m/s. Calculate the total mechanical energy of the oscillator.
Show answer and explanation

Answer: D · Worked explanation

At equilibrium all the energy is kinetic: E=12mv2=12(2.0)(3.0)2=9.0 JE=\frac{1}{2}mv^2=\frac{1}{2}(2.0)(3.0)^2=9.0\ \mathrm{J}E=21​mv2=21​(2.0)(3.0)2=9.0 J. The value 18 omits the factor of one half. The value 6.0 uses mvmvmv, which is momentum, not energy. Check the units: kilograms times meters squared per second squared gives joules, as required for energy.
8.

Hard·Calculate[2 marks]

A 0.50 kg0.50\ \mathrm{kg}0.50 kg mass on a spring with k=100 N/mk=100\ \mathrm{N/m}k=100 N/m has amplitude 0.20 m0.20\ \mathrm{m}0.20 m. Calculate its speed at x=0.10 mx=0.10\ \mathrm{m}x=0.10 m.
Show answer and explanation

Answer: C · Worked explanation

The total energy is 12(100)(0.20)2=2.0 J\frac{1}{2}(100)(0.20)^2=2.0\ \mathrm{J}21​(100)(0.20)2=2.0 J and U=12(100)(0.10)2=0.50 JU=\frac{1}{2}(100)(0.10)^2=0.50\ \mathrm{J}U=21​(100)(0.10)2=0.50 J. So K=1.5 JK=1.5\ \mathrm{J}K=1.5 J and v=2(1.5)0.50=2.4 m/sv=\sqrt{\frac{2(1.5)}{0.50}}=2.4\ \mathrm{m/s}v=0.502(1.5)​​=2.4 m/s. The value 2.8 is the maximum speed at equilibrium. Always find the total energy first, then subtract the potential energy at that position to find the kinetic energy.
9.

Hard·Compare[2 marks]

Two oscillators have the same spring constant and amplitude. One has mass mmm and the other has mass 4m4m4m. Compare their total energies and maximum speeds.
Show answer and explanation

Answer: B · Worked explanation

Energy is 12kA2\frac{1}{2}kA^221​kA2, which does not depend on mass, so the energies are equal. Then vmax=2Emv_{max}=\sqrt{\frac{2E}{m}}vmax​=m2E​​, so four times the mass gives half the speed. A quarter is tempting but forgets the square root. Heavier oscillators move more slowly but store the same energy.
10.

Hard·Calculate[2 marks]

A pendulum bob is released from rest at a height of 0.20 m0.20\ \mathrm{m}0.20 m above its lowest point. Take g=9.8 m/s2g=9.8\ \mathrm{m/s^2}g=9.8 m/s2 and ignore friction. Calculate its speed at the lowest point.
Show answer and explanation

Answer: A · Worked explanation

Equate mghmghmgh to 12mv2\frac{1}{2}mv^221​mv2. Then v=2gh=2(9.8)(0.20)=2.0 m/sv=\sqrt{2gh}=\sqrt{2(9.8)(0.20)}=2.0\ \mathrm{m/s}v=2gh​=2(9.8)(0.20)​=2.0 m/s, and the mass cancels. The value 1.4 uses gh\sqrt{gh}gh​, which drops the factor of two. The value 3.9 is 2gh2gh2gh without the square root. Check the units: the square root of meters per second squared times meters gives meters per second, as a speed should.

Keep going

Next topic8.1 Internal structure and densityPrevious topic7.3 Representing and analyzing SHM

More in Unit 7 · Oscillations

  1. 7.1Defining simple harmonic motionNotes · 10 questions
  2. 7.2Frequency and period of SHMNotes · 10 questions
  3. 7.3Representing and analyzing SHMNotes · 10 questions
  4. 7.4Energy of simple harmonic oscillatorsNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Energy moves between kinetic and potential forms during each cycle
  2. 2Total mechanical energy stays constant in an ideal oscillator
  3. 3Amplitude sets the total energy through a squared relationship
  4. 4Energy conservation gives the speed at any position
  5. 5A pendulum and real oscillators follow the same energy pattern
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Energy against displacement

Energy (J)-0.1-0.0500.050.100.20.40.60.811.2Displacement x (m)
  • Potential energy U
  • Kinetic energy K
  • Total energy E