Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 1
  3. ›8 Fluids
  4. ›8.1 Internal structure and density

AP Physics 1 · Unit 8 · Fluids

8.1 Internal structure and density

Describe particle arrangement in solids, liquids and gases, calculate density, and compare the densities of common materials.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Particle arrangement differs between solids, liquids and gases
  1. 1Particle arrangement differs between solids, liquids and gases
  2. 2Density measures how much mass fits into a given volume
  3. 3Density calculations need consistent units
  4. 4Particle spacing explains why densities differ between states
  5. 5Comparing materials shows a very wide range of densities
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Particle arrangement differs between solids, liquids and gases

Everyday matter looks continuous, yet it is made of tiny particles. How those particles are arranged decides whether a sample keeps its shape or flows.

  • Solids: particles are close together and held in fixed positions, vibrating in place.
  • Liquids: particles are close together but able to slide past one another.
  • Gases: particles are far apart and move freely in all directions.

Liquids and gases can flow, so both are called fluids.

Figure 1. Solid and liquid particles are close together. Gas particles are far apart.

Key term

fluids

Substances that can flow and take the shape of their container; liquids and gases are fluids.

Part 1 done

2

Part 2 of 5: Density measures how much mass fits into a given volume

Two blocks of equal size can have very different masses. A lead block feels far heavier than a wooden one. This difference is density, the mass per unit volume.

Density is written as ρ=mV\rho=\frac{m}{V}ρ=Vm​. Mass is in kilograms and volume in cubic meters, so the SI unit is kg/m3\mathrm{kg/m^3}kg/m3. Densities are also often given in g/cm3\mathrm{g/cm^3}g/cm3.

Common mistake

Density is not the same as mass. A large block of a low-density material can have more mass than a small block of a dense one.

Key term

density

Mass per unit volume, ρ=mV\rho=\frac{m}{V}ρ=Vm​, measured in kg/m3\mathrm{kg/m^3}kg/m3 in SI units.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the description that matches the particles in a liquid.
Show answer and explanation

Answer: B · Worked explanation

Liquid particles are close together but not fixed, so they slide past one another. Close together in a regular pattern describes a solid, which is the tempting wrong option. A liquid has no fixed pattern, and that freedom lets it flow.
3

Part 3 of 5: Density calculations need consistent units

Rearranging the definition gives m=ρVm=\rho Vm=ρV and V=mρV=\frac{m}{\rho}V=ρm​. Choose the form that solves for the unknown. Convert units first, because 1 g/cm3=1000 kg/m31\ \mathrm{g/cm^3}=1000\ \mathrm{kg/m^3}1 g/cm3=1000 kg/m3 and 1 L=10−3 m31\ \mathrm{L}=10^{-3}\ \mathrm{m^3}1 L=10−3 m3.

Unit slips are the most common error. A volume given in liters or cubic centimeters must be converted before you use ρ\rhoρ in kg/m3\mathrm{kg/m^3}kg/m3.

Figure 2. Change the mass and volume and watch the density respond.

Worked example

Finding a density

A rectangular metal block measures 0.20 m0.20\ \mathrm{m}0.20 m by 0.10 m0.10\ \mathrm{m}0.10 m by 0.050 m0.050\ \mathrm{m}0.050 m. Its mass is 7.9 kg7.9\ \mathrm{kg}7.9 kg. Find its density.
  1. 1
    Find the volume: V=0.20×0.10×0.050=1.0×10−3 m3V=0.20\times0.10\times0.050=1.0\times10^{-3}\ \mathrm{m^3}V=0.20×0.10×0.050=1.0×10−3 m3.
  2. 2
    Use ρ=mV=7.91.0×10−3\rho=\frac{m}{V}=\frac{7.9}{1.0\times10^{-3}}ρ=Vm​=1.0×10−37.9​.
  3. 3
    Calculate: ρ=7900 kg/m3\rho=7900\ \mathrm{kg/m^3}ρ=7900 kg/m3.

Answer: The density is 7.9×103 kg/m37.9\times10^{3}\ \mathrm{kg/m^3}7.9×103 kg/m3.

Exam tip

Show the unit conversion line, and give the answer in kg/m3\mathrm{kg/m^3}kg/m3 unless the question asks for another unit.

Part 3 done

4

Part 4 of 5: Particle spacing explains why densities differ between states

In a gas, particles are far apart, so a given volume holds very little mass. In a solid or liquid, particles nearly touch. Their densities are far greater than a gas's.

This spacing also explains why gases are compressible. Squeezing a gas pushes its particles closer together. Solids and liquids resist this, because their particles already nearly touch.

Among solids, density also depends on how massive the particles are. Water is a notable exception to the usual pattern between states: ice is slightly less dense than liquid water.

Key term

compressible

Able to have its volume reduced noticeably by an increase in pressure; gases are, but liquids and solids barely are.

Part 4 done

Quick check

One question on the part you just read

Easy

State the SI unit of density.
Show answer and explanation

Answer: A · Worked explanation

Density is mass per volume, so its SI unit is kilograms per cubic meter. The inverse unit m3/kg\mathrm{m^3/kg}m3/kg is volume per mass. The unit N/m2\mathrm{N/m^2}N/m2 is for pressure, which is a different quantity. Units such as kilograms per cubic meter always signal mass divided by volume.
5

Part 5 of 5: Comparing materials shows a very wide range of densities

Densities vary enormously. The table lists approximate values at room conditions. Water is roughly eight hundred times as dense as air, and lead is over eleven times denser than water. Gases sit at the bottom of the range, and dense metals sit near the top.

Approximate densities

MaterialStateDensity (kg/m³)
AirGas1.2
IceSolid920
WaterLiquid1000
AluminumSolid2700
IronSolid7900
LeadSolid11,300
Material
Air
State
Gas
Density (kg/m³)
1.2
Material
Ice
State
Solid
Density (kg/m³)
920
Material
Water
State
Liquid
Density (kg/m³)
1000
Material
Aluminum
State
Solid
Density (kg/m³)
2700
Material
Iron
State
Solid
Density (kg/m³)
7900
Material
Lead
State
Solid
Density (kg/m³)
11,300

A rough rule helps with comparisons. A uniform object floats in a fluid that is denser than the object. It sinks in a fluid that is less dense.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Compare[3 marks]

    Compare the arrangement and motion of particles in a solid and in a gas.

    Show mark schemeHide mark scheme

    Model answer

    In a solid the particles are close together in fixed positions and vibrate in place. In a gas the particles are far apart and move freely in all directions.

    • 1 mark for stating that solid particles are close together and gas particles are far apart
    • 1 mark for stating that solid particles vibrate in fixed positions
    • 1 mark for stating that gas particles move freely
  2. 2.Calculate[2 marks]

    Calculate the density of an object with mass 0.45 kg0.45\ \mathrm{kg}0.45 kg and volume 5.0×10−4 m35.0\times10^{-4}\ \mathrm{m^3}5.0×10−4 m3.

    Show mark schemeHide mark scheme

    Model answer

    ρ=mV=0.455.0×10−4=900 kg/m3\rho=\frac{m}{V}=\frac{0.45}{5.0\times10^{-4}}=900\ \mathrm{kg/m^3}ρ=Vm​=5.0×10−40.45​=900 kg/m3.

    • 1 mark for using ρ=mV\rho=\frac{m}{V}ρ=Vm​
    • 1 mark for obtaining 900 kg/m3900\ \mathrm{kg/m^3}900 kg/m3
  3. 3.Calculate[2 marks]

    Calculate the mass of 2.0×10−3 m32.0\times10^{-3}\ \mathrm{m^3}2.0×10−3 m3 of aluminum, which has a density of 2700 kg/m32700\ \mathrm{kg/m^3}2700 kg/m3.

    Show mark schemeHide mark scheme

    Model answer

    m=ρV=(2700)(2.0×10−3)=5.4 kgm=\rho V=(2700)(2.0\times10^{-3})=5.4\ \mathrm{kg}m=ρV=(2700)(2.0×10−3)=5.4 kg.

    • 1 mark for using m=ρVm=\rho Vm=ρV
    • 1 mark for obtaining 5.4 kg5.4\ \mathrm{kg}5.4 kg
  4. 4.Explain[3 marks]

    Explain why a gas has a much lower density than a solid of the same substance.

    Show mark schemeHide mark scheme

    Model answer

    Gas particles are far apart, so a given volume contains few particles. Solid particles nearly touch, so the same volume holds far more. Less mass per volume means a lower density.

    • 1 mark for stating that gas particles are far apart
    • 1 mark for stating that a given volume of gas contains fewer particles or less mass
    • 1 mark for linking less mass per unit volume to lower density
  5. 5.Explain[2 marks]

    Explain why ice floats on liquid water.

    Show mark schemeHide mark scheme

    Model answer

    Ice has a density of about 920 kg/m3920\ \mathrm{kg/m^3}920 kg/m3, which is less than the 1000 kg/m31000\ \mathrm{kg/m^3}1000 kg/m3 of liquid water. A uniform object floats in a fluid that is denser than itself.

    • 1 mark for stating that ice is less dense than liquid water
    • 1 mark for stating that an object less dense than the fluid floats

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the states of matter that are classed as fluids.
Show answer and explanation

Answer: D · Worked explanation

A fluid is a substance that can flow. Liquids and gases both flow, so both are fluids. Solids keep a fixed shape, so they are not fluids. Liquids and solids are a tempting pairing because their particles are both close together.
4.

Medium·Calculate[2 marks]

Calculate the density of a sample with mass 12 kg12\ \mathrm{kg}12 kg and volume 0.0040 m30.0040\ \mathrm{m^3}0.0040 m3.
Show answer and explanation

Answer: C · Worked explanation

Use ρ=mV=120.0040=3000 kg/m3\rho=\frac{m}{V}=\frac{12}{0.0040}=3000\ \mathrm{kg/m^3}ρ=Vm​=0.004012​=3000 kg/m3. The value 0.00033 comes from dividing volume by mass. The value 3.0 comes from a power-of-ten slip, treating 0.0040 m30.0040\ \mathrm{m^3}0.0040 m3 as 4.0 m34.0\ \mathrm{m^3}4.0 m3. As a sense check, a few thousand kilograms per cubic meter is plausible for 12 kg in four liters of a metal.
5.

Medium·Calculate[2 marks]

A 250 cm3250\ \mathrm{cm^3}250 cm3 sample of oil has a mass of 200 g200\ \mathrm{g}200 g. Calculate its density in kg/m3\mathrm{kg/m^3}kg/m3.
Show answer and explanation

Answer: B · Worked explanation

The density is 200250=0.80 g/cm3\frac{200}{250}=0.80\ \mathrm{g/cm^3}250200​=0.80 g/cm3. Multiplying by 1000 gives 800 kg/m3800\ \mathrm{kg/m^3}800 kg/m3. The value 0.80 stops before the unit conversion. The value 1250 divides volume by mass instead. You can also convert first: 200 g=0.200 kg200\ \mathrm{g}=0.200\ \mathrm{kg}200 g=0.200 kg and 250 cm3=2.5×10−4 m3250\ \mathrm{cm^3}=2.5\times10^{-4}\ \mathrm{m^3}250 cm3=2.5×10−4 m3, which gives the same result.
6.

Medium·Calculate[2 marks]

Calculate the mass of 0.50 m30.50\ \mathrm{m^3}0.50 m3 of a material with density 2700 kg/m32700\ \mathrm{kg/m^3}2700 kg/m3.
Show answer and explanation

Answer: A · Worked explanation

Use m=ρV=(2700)(0.50)=1350 kgm=\rho V=(2700)(0.50)=1350\ \mathrm{kg}m=ρV=(2700)(0.50)=1350 kg. The value 5400 divides by the volume instead of multiplying. The value 2700 ignores the volume and simply repeats the density. A sanity check is that half a cubic meter of a material this dense has a mass of over a thousand kilograms.
7.

Medium·Explain[2 marks]

Explain why a gas has a lower density than a liquid.
Show answer and explanation

Answer: D · Worked explanation

Gas particles are far apart, so a given volume contains few particles and little mass. The same substance has the same particles in each state, so particle mass is not the reason. That makes the lighter-particles option the tempting wrong choice.
8.

Hard·Compare[2 marks]

Two cubes have the same mass. Cube A has an edge of 2.0 cm2.0\ \mathrm{cm}2.0 cm and cube B has an edge of 4.0 cm4.0\ \mathrm{cm}4.0 cm. Compare their densities.
Show answer and explanation

Answer: C · Worked explanation

Volume scales with the cube of the edge. Cube B has 23=82^3=823=8 times the volume, so for equal masses its density is one eighth that of A. The value of 2 is tempting but treats volume as proportional to edge length.
9.

Hard·Calculate[2 marks]

A solid metal block has density 8000 kg/m38000\ \mathrm{kg/m^3}8000 kg/m3 and mass 16 kg16\ \mathrm{kg}16 kg. A piece with volume 5.0×10−4 m35.0\times10^{-4}\ \mathrm{m^3}5.0×10−4 m3 is cut off. Calculate the mass of the piece.
Show answer and explanation

Answer: B · Worked explanation

A cut piece has the same density as the block. So m=ρV=(8000)(5.0×10−4)=4.0 kgm=\rho V=(8000)(5.0\times10^{-4})=4.0\ \mathrm{kg}m=ρV=(8000)(5.0×10−4)=4.0 kg. The value 16 ignores the cut. The value 40 comes from a power-of-ten slip in the volume. Cutting does not change what the material is made of, so the density stays constant.
10.

Hard·Determine[2 marks]

A mixture is made from 2.0 L2.0\ \mathrm{L}2.0 L of water at 1000 kg/m31000\ \mathrm{kg/m^3}1000 kg/m3 and 3.0 L3.0\ \mathrm{L}3.0 L of oil at 800 kg/m3800\ \mathrm{kg/m^3}800 kg/m3. Assume the volumes add. Determine the density of the mixture.
Show answer and explanation

Answer: A · Worked explanation

The masses are 2.0 kg2.0\ \mathrm{kg}2.0 kg and 2.4 kg2.4\ \mathrm{kg}2.4 kg, so the total is 4.4 kg4.4\ \mathrm{kg}4.4 kg in 5.0 L5.0\ \mathrm{L}5.0 L, or 0.0050 m30.0050\ \mathrm{m^3}0.0050 m3. The density is 4.40.0050=880 kg/m3\frac{4.4}{0.0050}=880\ \mathrm{kg/m^3}0.00504.4​=880 kg/m3. Averaging 1000 and 800 to get 900 ignores the unequal volumes. Check by mass: 2.0+2.4=4.4 kg2.0+2.4=4.4\ \mathrm{kg}2.0+2.4=4.4 kg in 5.0 L5.0\ \mathrm{L}5.0 L means 0.88 kg0.88\ \mathrm{kg}0.88 kg per liter.

Keep going

Next topic8.2 PressurePrevious topic7.4 Energy of simple harmonic oscillators

More in Unit 8 · Fluids

  1. 8.1Internal structure and densityNotes · 10 questions
  2. 8.2PressureNotes · 10 questions
  3. 8.3Fluids and Newton's lawsNotes · 10 questions
  4. 8.4Fluids and conservation lawsNotes · 10 questions

All AP Physics 1 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Particle arrangement differs between solids, liquids and gases
  2. 2Density measures how much mass fits into a given volume
  3. 3Density calculations need consistent units
  4. 4Particle spacing explains why densities differ between states
  5. 5Comparing materials shows a very wide range of densities
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe