Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Physics 2
  3. ›9 Thermodynamics
  4. ›9.2 The ideal gas law

AP Physics 2 · Unit 9 · Thermodynamics

9.2 The ideal gas law

Apply the ideal gas law to find pressure, volume, or temperature, convert between Celsius and kelvin, and judge when the law applies.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5An ideal gas is a simple model of real gases
  1. 1An ideal gas is a simple model of real gases
  2. 2The ideal gas law relates pressure, volume, amount and temperature
  3. 3Temperatures in the gas law must be in kelvins
  4. 4A fixed amount of gas follows a simple ratio
  5. 5Real gases behave ideally at low pressure and high temperature
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: An ideal gas is a simple model of real gases

A bicycle tire feels harder on a hot day. A pump warms up as you squeeze air into the tire. In each case, the pressure, volume and temperature of a gas change together.

Physicists describe this with a simple model called the ideal gas. Its particles are tiny compared with the spaces between them. They collide elastically and exert no forces on each other between collisions. Ignoring particle size and attractions keeps the mathematics simple.

Many real gases behave this way under ordinary conditions. That makes the model useful for prediction. Later sections show when the model works and when it fails.

Key term

ideal gas

An ideal gas is a model gas of point-like particles that collide elastically and interact only during collisions.

Part 1 done

2

Part 2 of 5: The ideal gas law relates pressure, volume, amount and temperature

Now put numbers on the connection. The ideal gas law states PV=nRTPV=nRTPV=nRT. Here PPP is pressure, VVV is volume, TTT is absolute temperature, and nnn is the amount of gas in moles.

The mole counts particles in large groups. The gas constant is R=8.314 J/(mol K)R=8.314\,\mathrm{J/(mol\,K)}R=8.314J/(molK). It has the same value for every ideal gas.

Quantities in the ideal gas law and their SI units.

SymbolQuantitySI unit
PPPpressurepascal (Pa)
VVVvolumem3\mathrm{m^3}m3
nnnamount of gasmole (mol)
TTTabsolute temperaturekelvin (K)
Symbol
PPP
Quantity
pressure
SI unit
pascal (Pa)
Symbol
VVV
Quantity
volume
SI unit
m3\mathrm{m^3}m3
Symbol
nnn
Quantity
amount of gas
SI unit
mole (mol)
Symbol
TTT
Quantity
absolute temperature
SI unit
kelvin (K)

The law can also count particles directly: PV=NkBTPV=Nk_\mathrm{B}TPV=NkB​T. Here NNN is the number of particles.

Exam tip

Use SI units throughout. Pressure in pascals and volume in cubic meters make PVPVPV come out in joules.

Key terms · tap one for its definition

ideal gas law

The ideal gas law states that PV=nRTPV=nRTPV=nRT for an ideal gas, linking pressure, volume, amount in moles and absolute temperature.

mole

The mole is the SI unit of amount of substance; one mole contains 6.022×10236.022\times10^{23}6.022×1023 particles.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate the kelvin temperature that corresponds to 25 °C.
Show answer and explanation

Answer: C · Worked explanation

The kelvin temperature is the Celsius temperature plus 273, so 25 + 273 = 298 K. The value 248 K comes from subtracting 25 instead of adding it, and 25 K ignores the conversion. The value 273 K is the size of the offset, not the temperature that matches 25 °C.
3

Part 3 of 5: Temperatures in the gas law must be in kelvins

The Celsius scale puts zero at the freezing point of water. That choice is convenient but arbitrary for gases. The kelvin scale starts at absolute zero, the lowest possible temperature.

To convert, add 273 to the Celsius temperature: T=TC+273T=T_\mathrm{C}+273T=TC​+273. Here TTT is in kelvins and TCT_\mathrm{C}TC​ is in degrees Celsius. A change of 1 °C equals a change of 1 K. On this scale, 0 K corresponds to about −273 °C.

Common mistake

Doubling the Celsius temperature does not double the pressure. Only the kelvin temperature is proportional to pressure at constant volume.

Worked example

Pressure of a gas sample

A rigid container of volume 0.0200 m30.0200\,\mathrm{m^3}0.0200m3 holds 0.800 mol0.800\,\mathrm{mol}0.800mol of an ideal gas at 27 °C. Find the pressure.
  1. 1
    Convert the temperature: T=27+273=300 KT=27+273=300\,\mathrm{K}T=27+273=300K.
  2. 2
    Rearrange PV=nRTPV=nRTPV=nRT to P=nRTVP=\frac{nRT}{V}P=VnRT​.
  3. 3
    Substitute: P=(0.800 mol)(8.314 J/(mol K))(300 K)0.0200 m3P=\frac{(0.800\,\mathrm{mol})(8.314\,\mathrm{J/(mol\,K)})(300\,\mathrm{K})}{0.0200\,\mathrm{m^3}}P=0.0200m3(0.800mol)(8.314J/(molK))(300K)​.
  4. 4
    Calculate: P=9.98×104 PaP=9.98\times10^{4}\,\mathrm{Pa}P=9.98×104Pa.

Answer: The pressure is 9.98×104 Pa9.98\times10^{4}\,\mathrm{Pa}9.98×104Pa, about 99.8 kPa.

Key term

absolute zero

Absolute zero is 0 K, the lowest possible temperature, equal to about −273 °C.

Part 3 done

4

Part 4 of 5: A fixed amount of gas follows a simple ratio

Many problems change a gas from one state to another. The amount of gas stays the same, so nnn and RRR do not change. Then PVT\frac{PV}{T}TPV​ keeps one value, and P1V1T1=P2V2T2\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}T1​P1​V1​​=T2​P2​V2​​.

This ratio form avoids the gas constant. Temperatures must still be in kelvins. Pressures and volumes may use any units, provided both sides match. Use this form whenever a problem gives an initial state and asks about a final state.

Three special cases come up often. In each, one more quantity is also fixed.

  • Constant temperature: P1V1=P2V2P_1V_1=P_2V_2P1​V1​=P2​V2​.
  • Constant volume: P1T1=P2T2\frac{P_1}{T_1}=\frac{P_2}{T_2}T1​P1​​=T2​P2​​.
  • Constant pressure: V1T1=V2T2\frac{V_1}{T_1}=\frac{V_2}{T_2}T1​V1​​=T2​V2​​.
Figure 1. At constant temperature, pressure falls as volume rises, and a higher temperature gives a higher curve.

Worked example

Heating a sealed tank

A sealed rigid tank of gas is at 2.0×105 Pa2.0\times10^{5}\,\mathrm{Pa}2.0×105Pa and 20 °C. It warms to 50 °C. Find the new pressure.
  1. 1
    Convert both temperatures: T1=293 KT_1=293\,\mathrm{K}T1​=293K and T2=323 KT_2=323\,\mathrm{K}T2​=323K.
  2. 2
    Volume is constant, so P1T1=P2T2\frac{P_1}{T_1}=\frac{P_2}{T_2}T1​P1​​=T2​P2​​ and P2=P1T2T1P_2=P_1\frac{T_2}{T_1}P2​=P1​T1​T2​​.
  3. 3
    Substitute: P2=(2.0×105 Pa)323 K293 KP_2=(2.0\times10^{5}\,\mathrm{Pa})\frac{323\,\mathrm{K}}{293\,\mathrm{K}}P2​=(2.0×105Pa)293K323K​.
  4. 4
    Calculate: P2=2.2×105 PaP_2=2.2\times10^{5}\,\mathrm{Pa}P2​=2.2×105Pa.

Answer: The new pressure is 2.2×105 Pa2.2\times10^{5}\,\mathrm{Pa}2.2×105Pa.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the pair of units for pressure and volume that, with R=8.314 J/(mol K)R=8.314\,\mathrm{J/(mol\,K)}R=8.314J/(molK), makes PVPVPV come out in joules.
Show answer and explanation

Answer: C · Worked explanation

A pascal is a newton per square meter, so a pascal times a cubic meter is a newton meter, which is a joule. A pascal times a liter is only a millijoule, so using liters makes the number for PVPVPV 1000 times too large. A kilopascal times a cubic meter is a kilojoule, so that pairing makes the number 1000 times too small. Mixed units make PVPVPV and nRTnRTnRT disagree.
5

Part 5 of 5: Real gases behave ideally at low pressure and high temperature

So far every gas has been treated as ideal. Real particles do have volume, and they attract each other slightly. Near the temperature where a gas condenses, the model fails badly. These effects matter more when particles are crowded together or moving slowly.

  • Low pressure, so particles are far apart.
  • High temperature, so attractions are small compared with kinetic energy.
  • Weakly attracting particles, such as helium at room temperature.

Exam tip

When you justify using the ideal gas law, name both ideas. Particles are far apart, and attractions between them are negligible.

Go deeperLinking the two gas constants

The two forms of the law agree because N=nNAN=nN_\mathrm{A}N=nNA​, where NA=6.022×1023N_\mathrm{A}=6.022\times10^{23}NA​=6.022×1023 particles per mole. Substituting gives PV=nNAkBTPV=nN_\mathrm{A}k_\mathrm{B}TPV=nNA​kB​T, so R=NAkBR=N_\mathrm{A}k_\mathrm{B}R=NA​kB​.

As a check, (6.022×1023)(1.38×10−23)≈8.31(6.022\times10^{23})(1.38\times10^{-23})\approx8.31(6.022×1023)(1.38×10−23)≈8.31 in J/(mol K)\mathrm{J/(mol\,K)}J/(molK), matching RRR.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[3 marks]

    Calculate the pressure of 0.250 mol0.250\,\mathrm{mol}0.250mol of an ideal gas in a 5.00×10−3 m35.00\times10^{-3}\,\mathrm{m^3}5.00×10−3m3 container at 127 °C.

    Show mark schemeHide mark scheme

    Model answer

    T=127+273=400 KT=127+273=400\,\mathrm{K}T=127+273=400K. P=nRTV=(0.250)(8.314)(400)5.00×10−3=1.66×105 PaP=\frac{nRT}{V}=\frac{(0.250)(8.314)(400)}{5.00\times10^{-3}}=1.66\times10^{5}\,\mathrm{Pa}P=VnRT​=5.00×10−3(0.250)(8.314)(400)​=1.66×105Pa.

    • 1 mark for converting the temperature to 400 K
    • 1 mark for substituting into P=nRTVP=\frac{nRT}{V}P=VnRT​
    • 1 mark for obtaining 1.66×105 Pa1.66\times10^{5}\,\mathrm{Pa}1.66×105Pa
  2. 2.Explain[2 marks]

    Explain why temperatures must be in kelvins when using the ideal gas law.

    Show mark schemeHide mark scheme

    Model answer

    The kelvin scale starts at absolute zero, so the gas variables are proportional to kelvin temperature. A Celsius zero is arbitrary, so using it would give wrong ratios.

    • 1 mark for stating that the kelvin scale starts at absolute zero
    • 1 mark for explaining that pressure or volume is proportional to kelvin temperature, but not to Celsius temperature
  3. 3.Predict[2 marks]

    Predict what happens to the pressure of a fixed amount of gas when its volume is halved at constant temperature. Give a reason.

    Show mark schemeHide mark scheme

    Model answer

    The pressure doubles, because PVPVPV stays constant when temperature and amount of gas are fixed.

    • 1 mark for predicting that the pressure doubles
    • 1 mark for giving the reason that PVPVPV is constant at fixed temperature and amount
  4. 4.Identify[2 marks]

    Identify two conditions under which a real gas behaves most like an ideal gas.

    Show mark schemeHide mark scheme

    Model answer

    Low pressure, so the particles are far apart, and high temperature, so attractions between particles are small compared with their kinetic energy.

    • 1 mark for identifying low pressure
    • 1 mark for identifying high temperature
  5. 5.Determine[3 marks]

    Determine the final volume of a gas that is heated at constant pressure from 300 K to 450 K, if its initial volume is 2.0 L.

    Show mark schemeHide mark scheme

    Model answer

    At constant pressure, V1T1=V2T2\frac{V_1}{T_1}=\frac{V_2}{T_2}T1​V1​​=T2​V2​​, so V2=2.0 L×450300=3.0 LV_2=2.0\,\mathrm{L}\times\frac{450}{300}=3.0\,\mathrm{L}V2​=2.0L×300450​=3.0L.

    • 1 mark for using V1T1=V2T2\frac{V_1}{T_1}=\frac{V_2}{T_2}T1​V1​​=T2​V2​​ at constant pressure
    • 1 mark for substituting the kelvin temperatures correctly
    • 1 mark for obtaining 3.0 L

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the conditions under which a real gas behaves most like an ideal gas.
Show answer and explanation

Answer: D · Worked explanation

At low pressure the particles are far apart, so their own volume and mutual attractions matter little. At high temperature they move fast enough that brief attractions have little effect. Low temperature and high pressure bring particles close and slow them, which leads toward condensing, so the ideal model fails there.
4.

Medium·Calculate[2 marks]

Calculate the pressure of 0.50 mol0.50\,\mathrm{mol}0.50mol of an ideal gas in a 0.0100 m30.0100\,\mathrm{m^3}0.0100m3 container at 27 °C.
Show answer and explanation

Answer: B · Worked explanation

With T=300 KT=300\,\mathrm{K}T=300K, P=nRTV=(0.50)(8.314)(300)0.0100≈1.2×105 PaP=\frac{nRT}{V}=\frac{(0.50)(8.314)(300)}{0.0100}\approx1.2\times10^{5}\,\mathrm{Pa}P=VnRT​=0.0100(0.50)(8.314)(300)​≈1.2×105Pa. Using 27 as a kelvin temperature gives 1.1×104 Pa1.1\times10^{4}\,\mathrm{Pa}1.1×104Pa. Leaving out the amount of gas gives 2.5×105 Pa2.5\times10^{5}\,\mathrm{Pa}2.5×105Pa. Check the units as well: pascals times cubic meters gives joules, which matches the right-hand side of the gas law. The result is also close to normal atmospheric pressure, which is sensible for half a mole in a container of this size.
5.

Medium·Determine[2 marks]

A rigid sealed tank holds gas at 3.0×105 Pa3.0\times10^{5}\,\mathrm{Pa}3.0×105Pa and 27 °C. The gas is heated to 87 °C. Determine the new pressure.
Show answer and explanation

Answer: D · Worked explanation

Volume is fixed, so P2=P1T2T1=(3.0×105)360300=3.6×105 PaP_2=P_1\frac{T_2}{T_1}=(3.0\times10^{5})\frac{360}{300}=3.6\times10^{5}\,\mathrm{Pa}P2​=P1​T1​T2​​=(3.0×105)300360​=3.6×105Pa. The value 9.7×105 Pa9.7\times10^{5}\,\mathrm{Pa}9.7×105Pa comes from using the Celsius ratio 87 to 27. Inverting the kelvin ratio gives 2.5×105 Pa2.5\times10^{5}\,\mathrm{Pa}2.5×105Pa, which would mean heating lowers the pressure. Pressure rises with temperature when volume is fixed, so the answer must exceed the starting pressure. That one check rules out any value that is smaller than the original.
6.

Medium·Determine[2 marks]

An ideal gas at 2.0×105 Pa2.0\times10^{5}\,\mathrm{Pa}2.0×105Pa occupies 4.0 L. It expands to 10 L at constant temperature. Determine the final pressure.
Show answer and explanation

Answer: D · Worked explanation

At constant temperature and amount, P1V1=P2V2P_1V_1=P_2V_2P1​V1​=P2​V2​, so P2=(2.0×105)(4.0)10=8.0×104 PaP_2=\frac{(2.0\times10^{5})(4.0)}{10}=8.0\times10^{4}\,\mathrm{Pa}P2​=10(2.0×105)(4.0)​=8.0×104Pa. Multiplying by the volume ratio instead gives 5.0×105 Pa5.0\times10^{5}\,\mathrm{Pa}5.0×105Pa, which wrongly has pressure rising on expansion. The value 8.0×1058.0\times10^{5}8.0×105 forgets to divide by the final volume. Because the volume grows by a factor of 2.5, the pressure must fall by that factor. The correct value is therefore smaller than the initial pressure, not larger.
7.

Medium·Identify[1 mark]

Identify the gas sample that matches the ideal gas model least well.
Show answer and explanation

Answer: B · Worked explanation

High pressure crowds the particles together, and a temperature just above condensing means attractions are strong compared with kinetic energy. Both effects break the ideal assumptions. The other samples are sparse, hot, or weakly attracting, so they follow the ideal model well.
8.

Hard·Calculate[2 marks]

A container holds an ideal gas at 1.00×105 Pa1.00\times10^{5}\,\mathrm{Pa}1.00×105Pa and 300 K with volume 0.0250 m30.0250\,\mathrm{m^3}0.0250m3. Calculate the number of particles. Use kB=1.38×10−23 J/Kk_\mathrm{B}=1.38\times10^{-23}\,\mathrm{J/K}kB​=1.38×10−23J/K.
Show answer and explanation

Answer: A · Worked explanation

Use PV=NkBTPV=Nk_\mathrm{B}TPV=NkB​T, so N=PVkBT=(1.00×105)(0.0250)(1.38×10−23)(300)=6.04×1023N=\frac{PV}{k_\mathrm{B}T}=\frac{(1.00\times10^{5})(0.0250)}{(1.38\times10^{-23})(300)}=6.04\times10^{23}N=kB​TPV​=(1.38×10−23)(300)(1.00×105)(0.0250)​=6.04×1023. Entering the volume as 25.0 instead of 0.0250 gives 6.04×10266.04\times10^{26}6.04×1026. Using 27 as the kelvin temperature gives 6.7×10246.7\times10^{24}6.7×1024. Always convert to SI units before using the particle form of the law, since the Boltzmann constant is given in joules per kelvin. A quick estimate also helps: one mole holds about 6 times 10 to the 23 particles, so a similar count is reasonable for about 1 mole.
9.

Hard·Determine[2 marks]

A fixed amount of ideal gas has pressure 1.0×105 Pa1.0\times10^{5}\,\mathrm{Pa}1.0×105Pa, volume 3.0 L and temperature 300 K. It changes to 2.0×105 Pa2.0\times10^{5}\,\mathrm{Pa}2.0×105Pa and 2.0 L. Determine the final temperature.
Show answer and explanation

Answer: C · Worked explanation

For a fixed amount of gas, P1V1T1=P2V2T2\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}T1​P1​V1​​=T2​P2​V2​​, so T2=300 K×(2.0)(2.0)(1.0)(3.0)=400 KT_2=300\,\mathrm{K}\times\frac{(2.0)(2.0)}{(1.0)(3.0)}=400\,\mathrm{K}T2​=300K×(1.0)(3.0)(2.0)(2.0)​=400K. The value 225 K comes from inverting the ratio. The value 600 K appears if the pressure doubling is applied and the volume change is ignored. Check the direction: the product of pressure and volume rises by a factor of 4 over 3, so the temperature must rise above 300 K, which rules out any smaller value.
10.

Hard[2 marks]

A student says that raising a gas’s temperature from 25 °C to 50 °C at constant volume doubles its pressure. Evaluate the claim.
Show answer and explanation

Answer: C · Worked explanation

At constant volume and amount, pressure is proportional to the kelvin temperature. The ratio 323298≈1.08\frac{323}{298}\approx1.08298323​≈1.08 means an 8 % increase. Proportionality holds only on the kelvin scale, so doubling the Celsius value does not double the pressure. Constant volume does not keep pressure constant, because hotter particles hit harder.

Keep going

Next topic9.3 Thermal energy transfer and equilibriumPrevious topic9.1 Kinetic theory of temperature and pressure

More in Unit 9 · Thermodynamics

  1. 9.1Kinetic theory of temperature and pressureNotes · 10 questions
  2. 9.2The ideal gas lawNotes · 10 questions
  3. 9.3Thermal energy transfer and equilibriumNotes · 10 questions
  4. 9.4First law of thermodynamicsNotes · 10 questions
  5. 9.5Specific heat and thermal conductivityNotes · 10 questions
  6. 9.6Entropy and the second lawNotes · 10 questions

All AP Physics 2 topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1An ideal gas is a simple model of real gases
  2. 2The ideal gas law relates pressure, volume, amount and temperature
  3. 3Temperatures in the gas law must be in kelvins
  4. 4A fixed amount of gas follows a simple ratio
  5. 5Real gases behave ideally at low pressure and high temperature
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Pressure against volume

Pressure (kPa)02468100100200300400500Volume (L)
  • T = 300 K
  • T = 600 K