AQA A-level Chemistry · Section 3.1 · Physical chemistry
3.1.6 Equilibria and Kc
Describe dynamic equilibrium, predict shifts using Le Chatelier’s principle, and write and use the equilibrium constant to judge the position of equilibrium.
1/5Dynamic equilibrium forms when forward and reverse rates match
- Dynamic equilibrium forms when forward and reverse rates match
- Equilibrium shifts to oppose any change in conditions
- The equilibrium constant compares product and reactant concentrations
- A calculation starts by finding equilibrium concentrations
- The size of the equilibrium constant shows the position of equilibrium
- Check your recall
- Practice: 10 questions
Part 1 of 5: Dynamic equilibrium forms when forward and reverse rates match
Some reactions can run in both directions. Colourless dinitrogen tetroxide gas breaks down into brown nitrogen dioxide, and the brown gas also joins up again. We show this with equilibrium harpoons: .
Seal the gas in a closed system, where nothing can enter or leave. The brown colour deepens, then stops changing. The mixture has reached dynamic equilibrium. The reactions have not stopped; the mixture only looks unchanged.
- Both the forward and reverse reactions continue.
- The two rates are equal.
- The concentrations of all species stay constant.
- The same mixture forms from either direction.
Key terms · tap one for its definition
closed system
A closed system allows energy transfer but does not allow substances to enter or leave.
dynamic equilibrium
Dynamic equilibrium occurs when forward and reverse reactions continue at equal rates in a closed system.
Part 2 of 5: Equilibrium shifts to oppose any change in conditions
A change in conditions disturbs a mixture at equilibrium. Le Chatelier’s principle predicts the response. The position of equilibrium then moves towards the reactants or the products until the rates match again.
We use the Haber process as an example: , with for the forward reaction. A shift to the right favours the products.
The principle gives only the direction of a shift. It does not say how far the mixture moves.
Shifts in the Haber process equilibrium
- Change
- Add more
- Shift
- Right
- Reason
- Uses up the extra reactant
- Change
- Raise the pressure
- Shift
- Right
- Reason
- Four moles of gas become two
- Change
- Raise the temperature
- Shift
- Left
- Reason
- Favours the endothermic direction
- Change
- Add a catalyst
- Shift
- No shift
- Reason
- Speeds both directions equally
Key terms · tap one for its definition
Le Chatelier’s principle
Le Chatelier’s principle says that when conditions change, an equilibrium shifts in the direction that opposes the change.
position of equilibrium
The position of equilibrium describes the relative amounts of reactants and products present in an equilibrium mixture.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: C · Worked explanation
Part 3 of 5: The equilibrium constant compares product and reactant concentrations
A shift gives a direction, but not how far a reaction goes. The equilibrium constant, , gives a number. It uses concentrations measured at equilibrium, written in square brackets, at one temperature.
Products go on top, reactants underneath, and each concentration is raised to the power of its coefficient. For the Haber process, .
The units come from the expression. Here they are . If the units cancel completely, has no units.
At a given temperature, is fixed. It takes the same value whatever amounts of reactants you start with. One set of equilibrium concentrations therefore helps predict others.
Key term
equilibrium constant
The equilibrium constant relates equilibrium product and reactant concentrations using powers from the balanced equation.
Part 4 of 5: A calculation starts by finding equilibrium concentrations
Experiments often give amounts in moles, not concentrations. Divide each amount by the volume in first. Then substitute into the expression. Only equilibrium concentrations go into it.
Worked example
Calculating Kc from equilibrium amounts
- Convert to concentrations: .
- Likewise .
- Write the expression: .
- Substitute: .
Answer: .
If you start from initial amounts, build the equilibrium amounts in steps.
- Write the initial amounts.
- Use the equation’s ratio to find the amount that reacted.
- Subtract from the reactants and add to the products.
- Divide each amount by the volume.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 5 of 5: The size of the equilibrium constant shows the position of equilibrium
A large means the equilibrium mixture holds mostly products. A small means it holds mostly reactants. A value near 1 means both sides are present in significant amounts. It says nothing about how fast equilibrium is reached.
Only temperature changes the value of . For an exothermic reaction, raising the temperature shifts equilibrium left and falls. For an endothermic reaction, rises.
Effect of each change on position and
- Change
- Concentration
- Position shifts?
- Yes
- changes?
- No
- Change
- Pressure
- Position shifts?
- Yes
- changes?
- No
- Change
- Temperature
- Position shifts?
- Yes
- changes?
- Yes
- Change
- Catalyst
- Position shifts?
- No
- changes?
- No
Check your recall[16 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.State[2 marks]
State what is meant by dynamic equilibrium.
Show mark schemeHide mark scheme
Model answer
Dynamic equilibrium occurs in a closed system when the forward and reverse reactions continue at equal rates, so the concentrations stay constant.
- 1 mark for stating that the forward and reverse reactions continue at equal rates
- 1 mark for stating that it occurs in a closed system and the concentrations stay constant
- 2.Explain[3 marks]
Explain why increasing the pressure moves the equilibrium to the right.
Show mark schemeHide mark scheme
Model answer
Four moles of gas on the left become two moles on the right. The equilibrium shifts to oppose the increase in pressure. It therefore moves to the side with fewer gas molecules, which is the right.
- 1 mark for stating that there are fewer moles of gas on the right
- 1 mark for stating that the equilibrium shifts to oppose the increase in pressure
- 1 mark for concluding that it moves right, towards fewer gas molecules
- 3.Explain[2 marks]
Explain why adding a catalyst does not change the position of equilibrium.
Show mark schemeHide mark scheme
Model answer
A catalyst speeds up the forward and reverse reactions equally. The rates stay equal, so the equilibrium mixture and are unchanged, although equilibrium is reached sooner.
- 1 mark for stating that the catalyst speeds up forward and reverse reactions equally
- 1 mark for stating that the equilibrium mixture is unchanged but reached sooner
- 4.Give[3 marks]
Give the expression for for and state its units.
Show mark schemeHide mark scheme
Model answer
, with units .
- 1 mark for writing on top
- 1 mark for writing underneath
- 1 mark for giving the units as
- 5.Calculate[3 marks]
Calculate for , given equilibrium concentrations of for , for and for .
Show mark schemeHide mark scheme
Model answer
, with no units.
- 1 mark for writing
- 1 mark for substituting the concentrations correctly
- 1 mark for obtaining 64 with no units
- 6.Suggest[3 marks]
Suggest how the value of changes when the temperature of an exothermic equilibrium is raised, and why.
Show mark schemeHide mark scheme
Model answer
decreases. Raising the temperature shifts the equilibrium in the endothermic direction, which is the reverse reaction. Product concentrations fall and reactant concentrations rise.
- 1 mark for stating that decreases
- 1 mark for stating that the equilibrium shifts in the endothermic, reverse direction
- 1 mark for linking this to lower product and higher reactant concentrations

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyIdentify[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumPredict[1 mark]
Show answer and explanation
Answer: D · Worked explanation
MediumCalculate[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumDetermine[1 mark]
Show answer and explanation
Answer: C · Worked explanation
MediumPredict[1 mark]
Show answer and explanation
Answer: B · Worked explanation
HardCalculate[2 marks]
Show answer and explanation
Answer: D · Worked explanation
HardPredict[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardIdentify[2 marks]
Show answer and explanation
Answer: C · Worked explanation