Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.1 Physical chemistry
  4. ›3.1.9 Rate equations

AQA A-level Chemistry · Section 3.1 · Physical chemistry

3.1.9 Rate equations

Write rate equations, find orders and rate constants from data, and use graphs to identify the order of a reaction.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6A rate equation links reaction rate to concentration
  1. 1A rate equation links reaction rate to concentration
  2. 2The order tells you how concentration affects the rate
  3. 3Comparing initial rates reveals each order
  4. 4The rate constant follows from the rate equation
  5. 5Concentration–time graphs show the order and the rate
  6. 6The slowest step controls the rate of a reaction
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: A rate equation links reaction rate to concentration

Think of a busy café. The more customers arrive, the more coffees are sold each minute. In the same way, a reaction usually speeds up when a reactant is more concentrated. The rate of reaction measures how quickly this happens.

We measure it as the change in concentration per unit time, so its units are mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1. A rate equation shows how rate depends on concentration, for example rate=k[A][B]2\mathrm{rate}=k[\mathrm{A}][\mathrm{B}]^2rate=k[A][B]2. Square brackets mean concentration in mol dm−3\mathrm{mol\,dm^{-3}}moldm−3, and kkk is a constant explained below.

Common mistake

Do not take the powers from the balanced equation. They are found by experiment, so a coefficient of 2 does not make a reactant second order.

Key terms · tap one for its definition

rate of reaction

The rate of reaction is the change in concentration of a reactant or product per unit time, in mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1.

rate equation

A rate equation is an experimentally determined expression linking reaction rate to reactant concentrations raised to their orders.

Part 1 done

2

Part 2 of 6: The order tells you how concentration affects the rate

Now look closely at the powers in a rate equation. The order with respect to a reactant is the power of its concentration. Orders are usually 0, 1 or 2.

  • Zero order: changing the concentration has no effect on the rate.
  • First order: doubling the concentration doubles the rate.
  • Second order: doubling the concentration quadruples the rate.

The overall order is the sum of the individual orders. For rate=k[A][B]2\mathrm{rate}=k[\mathrm{A}][\mathrm{B}]^2rate=k[A][B]2, the order is 1 in A, 2 in B and 3 overall. A zero-order reactant does not appear in the equation.

Key terms · tap one for its definition

order

The order with respect to a reactant is the power of its concentration in the rate equation, found by experiment.

overall order

The overall order is the sum of the orders with respect to every reactant in the rate equation.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the units of the rate of a reaction.
Show answer and explanation

Answer: B · Worked explanation

Rate is the change in concentration per unit time, so the units are mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1. The units s−1\mathrm{s^{-1}}s−1 belong to the rate constant of a first-order reaction, not to the rate itself, which is a common mix-up. Checking units against the quantities involved is a reliable habit: concentration divided by time.
3

Part 3 of 6: Comparing initial rates reveals each order

How can we find orders in practice? Run several experiments and measure the initial rate of each. This is the rate at the start, when concentrations are known and little reactant has been used. Change only one concentration between experiments.

Then compare the rates. If the concentration of A doubles and the rate doubles, A is first order. If the rate rises fourfold, A is second order. If the rate stays the same, A is zero order.

Initial rates for a reaction between A and B

Experiment[A][\mathrm{A}][A] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3[B][\mathrm{B}][B] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3Initial rate / mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1
10.100.102.0×10−32.0\times10^{-3}2.0×10−3
20.200.104.0×10−34.0\times10^{-3}4.0×10−3
30.100.208.0×10−38.0\times10^{-3}8.0×10−3
Experiment
1
[A][\mathrm{A}][A] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3
0.10
[B][\mathrm{B}][B] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3
0.10
Initial rate / mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1
2.0×10−32.0\times10^{-3}2.0×10−3
Experiment
2
[A][\mathrm{A}][A] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3
0.20
[B][\mathrm{B}][B] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3
0.10
Initial rate / mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1
4.0×10−34.0\times10^{-3}4.0×10−3
Experiment
3
[A][\mathrm{A}][A] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3
0.10
[B][\mathrm{B}][B] / mol dm−3\mathrm{mol\,dm^{-3}}moldm−3
0.20
Initial rate / mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1
8.0×10−38.0\times10^{-3}8.0×10−3

Exam tip

Name the two experiments you compare. State which concentration changed, which stayed fixed, and how many times the rate changed.

Key term

initial rate

The initial rate is the rate of reaction at time zero, found from the gradient of a tangent to the concentration–time curve.

Part 3 done

4

Part 4 of 6: The rate constant follows from the rate equation

Once the orders are known, the equation can be completed. Rearranging it gives the rate constant, kkk. Its value depends on temperature, but not on concentration. Raising the temperature increases kkk.

The units of kkk depend on the overall order. Work them out by substituting units into the rearranged equation, then simplify.

Units of the rate constant

Overall orderUnits of kkk
0mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1
1s−1\mathrm{s^{-1}}s−1
2dm3 mol−1 s−1\mathrm{dm^{3}\,mol^{-1}\,s^{-1}}dm3mol−1s−1
3dm6 mol−2 s−1\mathrm{dm^{6}\,mol^{-2}\,s^{-1}}dm6mol−2s−1
Overall order
0
Units of kkk
mol dm−3 s−1\mathrm{mol\,dm^{-3}\,s^{-1}}moldm−3s−1
Overall order
1
Units of kkk
s−1\mathrm{s^{-1}}s−1
Overall order
2
Units of kkk
dm3 mol−1 s−1\mathrm{dm^{3}\,mol^{-1}\,s^{-1}}dm3mol−1s−1
Overall order
3
Units of kkk
dm6 mol−2 s−1\mathrm{dm^{6}\,mol^{-2}\,s^{-1}}dm6mol−2s−1

Worked example

Finding orders and k from initial rates

Use the table of initial rates above to find the order with respect to A and to B. Write the rate equation and calculate kkk with units.
  1. 1
    Compare experiments 1 and 2. [A][\mathrm{A}][A] doubles, [B][\mathrm{B}][B] is constant and the rate doubles, so A is first order.
  2. 2
    Compare experiments 1 and 3. [B][\mathrm{B}][B] doubles, [A][\mathrm{A}][A] is constant and the rate rises fourfold, so B is second order.
  3. 3
    The rate equation is rate=k[A][B]2\mathrm{rate}=k[\mathrm{A}][\mathrm{B}]^2rate=k[A][B]2, so k=rate[A][B]2k=\frac{\mathrm{rate}}{[\mathrm{A}][\mathrm{B}]^2}k=[A][B]2rate​.
  4. 4
    Substitute experiment 1: k=2.0×10−3 mol dm−3 s−1(0.10 mol dm−3)×(0.10 mol dm−3)2k=\frac{2.0\times10^{-3}\,\mathrm{mol\,dm^{-3}\,s^{-1}}}{(0.10\,\mathrm{mol\,dm^{-3}})\times(0.10\,\mathrm{mol\,dm^{-3}})^2}k=(0.10moldm−3)×(0.10moldm−3)22.0×10−3moldm−3s−1​.
  5. 5
    The denominator is 1.0×10−3 mol3 dm−91.0\times10^{-3}\,\mathrm{mol^{3}\,dm^{-9}}1.0×10−3mol3dm−9, so k=2.0 dm6 mol−2 s−1k=2.0\,\mathrm{dm^{6}\,mol^{-2}\,s^{-1}}k=2.0dm6mol−2s−1.

Answer: rate=k[A][B]2\mathrm{rate}=k[\mathrm{A}][\mathrm{B}]^2rate=k[A][B]2 with k=2.0 dm6 mol−2 s−1k=2.0\,\mathrm{dm^{6}\,mol^{-2}\,s^{-1}}k=2.0dm6mol−2s−1.

The units of kkk confirm the overall order. A value in dm6 mol−2 s−1\mathrm{dm^{6}\,mol^{-2}\,s^{-1}}dm6mol−2s−1 can only come from a third-order reaction. Quote kkk with its units, because a value without them is incomplete.

Key term

rate constant

The rate constant, kkk, is the constant in the rate equation; its units depend on the overall order and its value on temperature.

Part 4 done

Quick check

One question on the part you just read

Easy

State the overall order of a reaction with the rate equation rate=k[P]2[Q]\mathrm{rate}=k[\mathrm{P}]^2[\mathrm{Q}]rate=k[P]2[Q].
Show answer and explanation

Answer: D · Worked explanation

The overall order is the sum of the powers: 2+1=32+1=32+1=3. Counting only the number of reactants gives second order, which ignores the power of 2 on P. A reaction is never fourth order here because no extra reactant term appears. Write down each power first, then add them to find the overall order.
5

Part 5 of 6: Concentration–time graphs show the order and the rate

Experiments are not the only route to the order. A graph of concentration against time also reveals it. The steepness of the curve at any point gives the rate at that moment. A tangent at time zero therefore gives the initial rate.

Worked example

Initial rate from a tangent

A tangent to a concentration–time curve at time zero passes through 0.50 mol dm−30.50\,\mathrm{mol\,dm^{-3}}0.50moldm−3 at 0 s and 0.10 mol dm−30.10\,\mathrm{mol\,dm^{-3}}0.10moldm−3 at 80 s. Calculate the initial rate.
  1. 1
    The rate is the size of the gradient: rate=change in concentrationchange in time\mathrm{rate}=\frac{\mathrm{change\ in\ concentration}}{\mathrm{change\ in\ time}}rate=change in timechange in concentration​.
  2. 2
    Substitute: 0.50−0.1080 mol dm−3 s−1\frac{0.50-0.10}{80}\,\mathrm{mol\,dm^{-3}\,s^{-1}}800.50−0.10​moldm−3s−1.
  3. 3
    Calculate: 0.4080=5.0×10−3\frac{0.40}{80}=5.0\times10^{-3}800.40​=5.0×10−3.

Answer: The initial rate is 5.0×10−3 mol dm−3 s−15.0\times10^{-3}\,\mathrm{mol\,dm^{-3}\,s^{-1}}5.0×10−3moldm−3s−1.

The half-life, t1/2t_{1/2}t1/2​, is the time for a reactant’s concentration to halve. A first-order reaction has a constant half-life, as the figure shows. Check this by timing two successive halvings.

Figure 1. The concentration halves in each successive 50 s interval.

A graph of rate against concentration gives a second view. Its shape also identifies the order.

Graph shapes for each order

OrderConcentration–time graphRate–concentration graph
ZeroStraight line, constant gradientHorizontal line
FirstCurve with constant half-lifeStraight line through the origin
SecondCurve with increasing half-lifeUpward-curving line
Order
Zero
Concentration–time graph
Straight line, constant gradient
Rate–concentration graph
Horizontal line
Order
First
Concentration–time graph
Curve with constant half-life
Rate–concentration graph
Straight line through the origin
Order
Second
Concentration–time graph
Curve with increasing half-life
Rate–concentration graph
Upward-curving line

Key term

half-life

The half-life, t1/2t_{1/2}t1/2​, is the time taken for the concentration of a reactant to fall to half its value.

Part 5 done

6

Part 6 of 6: The slowest step controls the rate of a reaction

Many reactions happen in several steps. Like the narrowest stretch of a road, the slowest step limits how fast products form. This is the rate-determining step.

The rate equation shows which species take part in this step and in any steps before it. A zero-order reactant is not part of it. A rate equation rate=k[A][B]\mathrm{rate}=k[\mathrm{A}][\mathrm{B}]rate=k[A][B] suggests one A and one B in the slowest step.

Common mistake

Do not say that the fastest step controls the rate. The slowest step does, however rapid the other steps are.

Go deeperHalf-life and the rate constant

For a first-order reaction, the half-life and the rate constant are linked by t1/2=ln⁡2kt_{1/2}=\frac{\ln 2}{k}t1/2​=kln2​. Since ln⁡2≈0.693\ln 2\approx0.693ln2≈0.693, a half-life of 50 s gives k≈0.0139 s−1k\approx0.0139\,\mathrm{s^{-1}}k≈0.0139s−1.

The half-life does not depend on the starting concentration. This is why it is a reliable way to recognise first-order behaviour.

Key term

rate-determining step

The rate-determining step is the slowest step in a reaction mechanism and so controls the overall rate.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by the order with respect to a reactant, and give the effect on rate of doubling the concentration of a second-order reactant.

    Show mark schemeHide mark scheme

    Model answer

    The order is the power of the reactant’s concentration in the rate equation. Doubling the concentration of a second-order reactant increases the rate fourfold.

    • 1 mark for stating that the order is the power of the concentration in the rate equation
    • 1 mark for stating that the rate increases by a factor of four
  2. 2.Calculate[3 marks]

    The rate equation for a reaction is rate=k[C]2\mathrm{rate}=k[\mathrm{C}]^2rate=k[C]2. At [C]=0.050 mol dm−3[\mathrm{C}]=0.050\,\mathrm{mol\,dm^{-3}}[C]=0.050moldm−3 the rate is 1.5×10−4 mol dm−3 s−11.5\times10^{-4}\,\mathrm{mol\,dm^{-3}\,s^{-1}}1.5×10−4moldm−3s−1. Calculate kkk and give its units.

    Show mark schemeHide mark scheme

    Model answer

    k=rate[C]2=1.5×10−4(0.050)2=0.060 dm3 mol−1 s−1k=\frac{\mathrm{rate}}{[\mathrm{C}]^2}=\frac{1.5\times10^{-4}}{(0.050)^2}=0.060\,\mathrm{dm^{3}\,mol^{-1}\,s^{-1}}k=[C]2rate​=(0.050)21.5×10−4​=0.060dm3mol−1s−1.

    • 1 mark for rearranging to k=rate/[C]2k=\mathrm{rate}/[\mathrm{C}]^2k=rate/[C]2
    • 1 mark for obtaining a value of 0.060
    • 1 mark for giving the units as dm3 mol−1 s−1\mathrm{dm^{3}\,mol^{-1}\,s^{-1}}dm3mol−1s−1
  3. 3.Describe[3 marks]

    Describe how a concentration–time graph shows whether a reaction is zero order or first order in a reactant.

    Show mark schemeHide mark scheme

    Model answer

    A zero-order reactant gives a straight line with a constant gradient. A first-order reactant gives a curve. For first order, successive half-lives are equal.

    • 1 mark for stating that zero order gives a straight line with constant gradient
    • 1 mark for stating that first order gives a curve
    • 1 mark for stating that the half-life is constant for first order
  4. 4.Explain[2 marks]

    Explain why the rate equation cannot be written from the balanced equation alone.

    Show mark schemeHide mark scheme

    Model answer

    The orders must be found by experiment. Only the slowest step of the mechanism affects the rate, so coefficients need not match the powers.

    • 1 mark for stating that orders are found by experiment
    • 1 mark for explaining that the rate depends on the rate-determining step, not the overall coefficients
  5. 5.Calculate[3 marks]

    A tangent to a concentration–time curve at time zero passes through 0.80 mol dm−30.80\,\mathrm{mol\,dm^{-3}}0.80moldm−3 at 0 s and 0.20 mol dm−30.20\,\mathrm{mol\,dm^{-3}}0.20moldm−3 at 40 s. Calculate the initial rate.

    Show mark schemeHide mark scheme

    Model answer

    Initial rate = 0.80−0.2040=0.015 mol dm−3 s−1\frac{0.80-0.20}{40}=0.015\,\mathrm{mol\,dm^{-3}\,s^{-1}}400.80−0.20​=0.015moldm−3s−1.

    • 1 mark for finding the change in concentration as 0.60 mol dm⁻³
    • 1 mark for dividing by 40 s
    • 1 mark for giving 0.015 mol dm−3 s−10.015\,\mathrm{mol\,dm^{-3}\,s^{-1}}0.015moldm−3s−1 as a positive rate
  6. 6.Suggest[2 marks]

    Suggest what the rate equation rate=k[A][B]\mathrm{rate}=k[\mathrm{A}][\mathrm{B}]rate=k[A][B] shows about the slowest step of the mechanism.

    Show mark schemeHide mark scheme

    Model answer

    One A and one B are involved in the rate-determining step, or in steps before it. Any reactant not in the rate equation is not part of the slowest step.

    • 1 mark for stating that A and B both take part in the rate-determining step or before it
    • 1 mark for suggesting that one particle of each is involved

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

A concentration–time graph for a reactant is a straight line with a constant downward gradient. Identify the order of the reaction in that reactant.
Show answer and explanation

Answer: A · Worked explanation

A constant gradient means the rate does not change as the concentration falls, which is zero order. First order would give a curve with a constant half-life, because the rate falls as the concentration falls. Reading the shape of the line is the quickest way to find the order from this kind of graph.
4.

Medium·Calculate[2 marks]

A reaction is first order in X and second order in Y. Both concentrations are doubled. Calculate the factor by which the rate increases.
Show answer and explanation

Answer: C · Worked explanation

Doubling X doubles the rate (21=22^1=221=2). Doubling Y quadruples it (22=42^2=422=4). Multiplying gives 2×4=82\times4=82×4=8. A factor of 6 comes from adding the two effects instead of multiplying them, which is not how powers combine. Always multiply the separate factors, because each reactant’s effect applies to the same rate.
5.

Medium·Determine[2 marks]

Determine the units of kkk for a reaction with the rate equation rate=k[A]2[B]\mathrm{rate}=k[\mathrm{A}]^2[\mathrm{B}]rate=k[A]2[B].
Show answer and explanation

Answer: A · Worked explanation

The overall order is 3, so k=mol dm−3 s−1(mol dm−3)3k=\frac{\mathrm{mol\,dm^{-3}\,s^{-1}}}{(\mathrm{mol\,dm^{-3}})^3}k=(moldm−3)3moldm−3s−1​, which simplifies to dm6 mol−2 s−1\mathrm{dm^{6}\,mol^{-2}\,s^{-1}}dm6mol−2s−1. The units dm3 mol−1 s−1\mathrm{dm^{3}\,mol^{-1}\,s^{-1}}dm3mol−1s−1 belong to a second-order reaction, so they would be wrong here. Substituting units into the rate equation is a good way to check this kind of answer.
6.

Medium·Calculate[2 marks]

A reaction is first order in A, with rate=k[A]\mathrm{rate}=k[\mathrm{A}]rate=k[A]. The rate is 3.0×10−4 mol dm−3 s−13.0\times10^{-4}\,\mathrm{mol\,dm^{-3}\,s^{-1}}3.0×10−4moldm−3s−1 when [A]=0.20 mol dm−3[\mathrm{A}]=0.20\,\mathrm{mol\,dm^{-3}}[A]=0.20moldm−3. Calculate kkk.
Show answer and explanation

Answer: B · Worked explanation

Rearranging gives k=rate[A]=3.0×10−40.20=1.5×10−3 s−1k=\frac{\mathrm{rate}}{[\mathrm{A}]}=\frac{3.0\times10^{-4}}{0.20}=1.5\times10^{-3}\,\mathrm{s^{-1}}k=[A]rate​=0.203.0×10−4​=1.5×10−3s−1. The same number with units of dm3 mol−1 s−1\mathrm{dm^{3}\,mol^{-1}\,s^{-1}}dm3mol−1s−1 is wrong because a first-order reaction has kkk in s−1\mathrm{s^{-1}}s−1. Multiplying rate by concentration gives 6.0×10−56.0\times10^{-5}6.0×10−5. Always check that the units of the answer match the overall order, and keep two significant figures.
7.

Medium·Calculate[2 marks]

A tangent to a concentration–time curve at time zero passes through 0.60 mol dm−30.60\,\mathrm{mol\,dm^{-3}}0.60moldm−3 at 0 s and 0.30 mol dm−30.30\,\mathrm{mol\,dm^{-3}}0.30moldm−3 at 30 s. Calculate the initial rate.
Show answer and explanation

Answer: D · Worked explanation

The initial rate is the size of the gradient: 0.60−0.3030=1.0×10−2 mol dm−3 s−1\frac{0.60-0.30}{30}=1.0\times10^{-2}\,\mathrm{mol\,dm^{-3}\,s^{-1}}300.60−0.30​=1.0×10−2moldm−3s−1. The value 1.0×1021.0\times10^{2}1.0×102 comes from dividing time by concentration change, which inverts the gradient. The rate is quoted as a positive number, so the negative sign of the gradient is dropped.
8.

Hard·Determine[2 marks]

The concentration of a reactant falls from 0.80 mol dm−30.80\,\mathrm{mol\,dm^{-3}}0.80moldm−3 with a constant half-life of 60 s. Determine the time needed for it to reach 0.10 mol dm−30.10\,\mathrm{mol\,dm^{-3}}0.10moldm−3.
Show answer and explanation

Answer: C · Worked explanation

The concentration halves three times: 0.80→0.40→0.20→0.100.80\rightarrow0.40\rightarrow0.20\rightarrow0.100.80→0.40→0.20→0.10. That takes 3×60=180 s3\times60=180\,\mathrm{s}3×60=180s. A value of 120 s counts only two halvings, which reaches 0.20 mol dm−30.20\,\mathrm{mol\,dm^{-3}}0.20moldm−3, and 240 s counts one halving too many. Each halving takes the same time, so counting the halvings is the quickest method here.
9.

Hard·Predict[2 marks]

A reaction 2A+B→C\mathrm{2A+B\rightarrow C}2A+B→C has the rate equation rate=k[A]\mathrm{rate}=k[\mathrm{A}]rate=k[A]. Identify the statement that is consistent with this.
Show answer and explanation

Answer: B · Worked explanation

A reactant that is zero order is not in the slowest step or any step before it, but it can still react afterwards. The order is 1 overall because the power in the rate equation is 1; the coefficient of 2 in the balanced equation does not set the order. In general, decide what each reactant does in the slowest step, rather than reading the overall equation.
10.

Hard·Predict[2 marks]

A reaction has initial rates of 1.0×10−31.0\times10^{-3}1.0×10−3, 2.0×10−32.0\times10^{-3}2.0×10−3 and 1.8×10−2 mol dm−3 s−11.8\times10^{-2}\,\mathrm{mol\,dm^{-3}\,s^{-1}}1.8×10−2moldm−3s−1 for [A],[B][\mathrm{A}],[\mathrm{B}][A],[B] of (0.10,0.10)(0.10, 0.10)(0.10,0.10), (0.20,0.10)(0.20, 0.10)(0.20,0.10) and (0.20,0.30) mol dm−3(0.20, 0.30)\,\mathrm{mol\,dm^{-3}}(0.20,0.30)moldm−3. Predict the rate when [A]=0.30[\mathrm{A}]=0.30[A]=0.30 and [B]=0.20 mol dm−3[\mathrm{B}]=0.20\,\mathrm{mol\,dm^{-3}}[B]=0.20moldm−3.
Show answer and explanation

Answer: A · Worked explanation

A is first order (rate doubles) and B is second order (tripling B raises the rate ninefold). So k=1.0×10−30.10×0.102=1.0k=\frac{1.0\times10^{-3}}{0.10\times0.10^2}=1.0k=0.10×0.1021.0×10−3​=1.0, and rate=1.0×0.30×0.202=1.2×10−2\mathrm{rate}=1.0\times0.30\times0.20^2=1.2\times10^{-2}rate=1.0×0.30×0.202=1.2×10−2. Treating B as first order gives 6.0×10−36.0\times10^{-3}6.0×10−3. Reusing the same kkk at the same temperature is valid, because kkk does not depend on concentration.

Keep going

Next topic3.1.10 Equilibrium constant KpPrevious topic3.1.8 Thermodynamics

More in Section 3.1 · Physical chemistry

  1. 3.1.4EnergeticsNotes · 10 questions
  2. 3.1.5KineticsNotes · 10 questions
  3. 3.1.6Equilibria and KcNotes · 10 questions
  4. 3.1.7RedoxNotes · 10 questions
  5. 3.1.8ThermodynamicsNotes · 10 questions
  6. 3.1.9Rate equationsNotes · 10 questions
  7. 3.1.10Equilibrium constant KpNotes · 10 questions
  8. 3.1.11Electrode potentials and cellsNotes · 10 questions
  9. 3.1.12Acids and basesNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1A rate equation links reaction rate to concentration
  2. 2The order tells you how concentration affects the rate
  3. 3Comparing initial rates reveals each order
  4. 4The rate constant follows from the rate equation
  5. 5Concentration–time graphs show the order and the rate
  6. 6The slowest step controls the rate of a reaction
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Concentration against time for a first-order reaction

Concentration of reactant (mol dm⁻³)05010015020000.20.40.60.8Time (s)
  • Reactant