Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.3 Organic chemistry
  4. ›3.3.3 Halogenoalkanes

AQA A-level Chemistry · Section 3.3 · Organic chemistry

3.3.3 Halogenoalkanes

Name halogenoalkanes, explain their nucleophilic substitution and elimination reactions, and account for the different rates at which they hydrolyse.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6A halogenoalkane is an alkane with a halogen in place of hydrogen
  1. 1A halogenoalkane is an alkane with a halogen in place of hydrogen
  2. 2The polar carbon–halogen bond attracts nucleophiles
  3. 3Hydroxide ions replace the halogen to make an alcohol
  4. 4Cyanide and ammonia give nitriles and amines
  5. 5Weaker carbon–halogen bonds make hydrolysis faster
  6. 6Hot ethanolic hydroxide removes hydrogen halide to form alkenes
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: A halogenoalkane is an alkane with a halogen in place of hydrogen

Imagine propane with one hydrogen atom swapped for bromine. The result is a halogenoalkane, a compound in which a halogen atom is bonded to a saturated carbon chain. Chloroethane and 2-bromopropane are examples.

Names are built from the longest carbon chain. The halogen is a prefix: fluoro, chloro, bromo or iodo. A number shows which carbon carries it, counted from the end giving the lower number. Several halogens are listed in alphabetical order.

Halogenoalkanes are also grouped by the carbon holding the halogen. In a primary halogenoalkane, that carbon is bonded to one other carbon atom. A secondary halogenoalkane has two, and a tertiary one has three.

Three halogenoalkanes of the same size

NameFormulaType
1-bromopropaneCH3CH2CH2Br\mathrm{CH_3CH_2CH_2Br}CH3​CH2​CH2​Brprimary
2-bromopropaneCH3CHBrCH3\mathrm{CH_3CHBrCH_3}CH3​CHBrCH3​secondary
2-bromo-2-methylpropane(CH3)3CBr\mathrm{(CH_3)_3CBr}(CH3​)3​CBrtertiary
Name
1-bromopropane
Formula
CH3CH2CH2Br\mathrm{CH_3CH_2CH_2Br}CH3​CH2​CH2​Br
Type
primary
Name
2-bromopropane
Formula
CH3CHBrCH3\mathrm{CH_3CHBrCH_3}CH3​CHBrCH3​
Type
secondary
Name
2-bromo-2-methylpropane
Formula
(CH3)3CBr\mathrm{(CH_3)_3CBr}(CH3​)3​CBr
Type
tertiary

Key terms · tap one for its definition

halogenoalkane

A halogenoalkane is an alkane in which one or more hydrogen atoms are replaced by halogen atoms.

primary halogenoalkane

A primary halogenoalkane has its halogen on a carbon atom that is bonded to only one other carbon atom.

Part 1 done

2

Part 2 of 6: The polar carbon–halogen bond attracts nucleophiles

Alkanes are unreactive, yet halogenoalkanes react readily. The difference lies in the bond to the halogen. Halogens are more electronegative than carbon, so the carbon–halogen bond is polar.

The carbon atom carries a slight positive charge, written δ+\delta+δ+. A species with a lone pair can attack this carbon. This attacking species is a nucleophile.

Hydroxide ions, cyanide ions and ammonia molecules are common nucleophiles. When one replaces the halogen, the reaction is nucleophilic substitution. The halogen leaves as a halide ion, taking the bonding pair of electrons with it.

Key terms · tap one for its definition

nucleophile

A nucleophile is a species that donates a lone pair of electrons to form a covalent bond.

nucleophilic substitution

Nucleophilic substitution replaces a group attached to carbon with a nucleophile.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the name of the compound CH3CH2CHBrCH3\mathrm{CH_3CH_2CHBrCH_3}CH3​CH2​CHBrCH3​.
Show answer and explanation

Answer: C · Worked explanation

The longest chain has four carbons, so the name is based on butane. Numbering from the end that gives the halogen the lower number places bromine on carbon 2. 3-bromobutane comes from numbering from the wrong end, which does not give the lowest number.
3

Part 3 of 6: Hydroxide ions replace the halogen to make an alcohol

Start with the simplest case, a halogenoalkane warmed with aqueous sodium hydroxide. The hydroxide ion is the nucleophile. This reaction is a hydrolysis, and the organic product is an alcohol.

For bromoethane, the equation is CH3CH2Br(l)+NaOH(aq)→CH3CH2OH(l)+NaBr(aq)\mathrm{CH_3CH_2Br(l) + NaOH(aq) \rightarrow CH_3CH_2OH(l) + NaBr(aq)}CH3​CH2​Br(l)+NaOH(aq)→CH3​CH2​OH(l)+NaBr(aq).

The mechanism has one step. A lone pair on the hydroxide ion forms a bond to the δ+\delta+δ+ carbon. At the same time the carbon–bromine bond breaks, and both of its electrons go to bromine.

Figure 1. The hydroxide lone pair attacks the carbon with a partial positive charge. The carbon–bromine bond breaks in the same step.

Exam tip

Start each curly arrow at a lone pair or a bond. End it at the atom or bond that receives the electron pair.

Key term

hydrolysis

Hydrolysis is a reaction in which a bond in a compound is broken by reaction with water or hydroxide ions.

Part 3 done

4

Part 4 of 6: Cyanide and ammonia give nitriles and amines

Hydroxide is not the only nucleophile that attacks this carbon. Heating a halogenoalkane with potassium cyanide in aqueous ethanol gives a nitrile. The cyanide ion replaces the halogen, so the carbon chain grows by one atom.

Bromoethane and cyanide give propanenitrile, CH3CH2CN\mathrm{CH_3CH_2CN}CH3​CH2​CN. This makes the reaction useful for lengthening a carbon chain.

Ammonia is a nucleophile through the lone pair on nitrogen. Heating a halogenoalkane with excess ammonia in ethanol, in a sealed tube, gives a primary amine. The sealed tube stops ammonia gas escaping.

Nucleophiles, conditions and products

NucleophileConditionsOrganic product
OH−\mathrm{OH^-}OH−warm with aqueous NaOHalcohol
CN−\mathrm{CN^-}CN−heat with KCN in aqueous ethanolnitrile
NH3\mathrm{NH_3}NH3​excess, in ethanol, sealed tube, heatedprimary amine
Nucleophile
OH−\mathrm{OH^-}OH−
Conditions
warm with aqueous NaOH
Organic product
alcohol
Nucleophile
CN−\mathrm{CN^-}CN−
Conditions
heat with KCN in aqueous ethanol
Organic product
nitrile
Nucleophile
NH3\mathrm{NH_3}NH3​
Conditions
excess, in ethanol, sealed tube, heated
Organic product
primary amine

Excess ammonia matters. The amine formed still has a lone pair, so it can attack another halogenoalkane. A large excess of ammonia makes this second reaction unlikely.

Key term

nitrile

A nitrile is an organic compound containing the −C≡N\mathrm{{-}C{\equiv}N}−C≡N group.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the species that can act as a nucleophile.
Show answer and explanation

Answer: A · Worked explanation

A nucleophile donates a lone pair of electrons. The cyanide ion has a lone pair and a negative charge, so it can attack a carbon with a partial positive charge. H+\mathrm{H^+}H+ is tempting because it is reactive, but it has no electrons to donate and accepts a pair instead.
5

Part 5 of 6: Weaker carbon–halogen bonds make hydrolysis faster

Hydrolysis happens at very different speeds for different halogens. Iodoalkanes react fastest and fluoroalkanes slowest; of the three in the table, chloroalkanes are slowest. The rate depends on how easily the carbon–halogen bond breaks, not on how polar it is.

Bond enthalpy and rate of hydrolysis

BondMean bond enthalpy (kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1)Precipitate with silver ionsRate
C–Cl346whiteslowest
C–Br290creamintermediate
C–I228yellowfastest
Bond
C–Cl
Mean bond enthalpy (kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1)
346
Precipitate with silver ions
white
Rate
slowest
Bond
C–Br
Mean bond enthalpy (kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1)
290
Precipitate with silver ions
cream
Rate
intermediate
Bond
C–I
Mean bond enthalpy (kJ mol−1\mathrm{kJ\,mol^{-1}}kJmol−1)
228
Precipitate with silver ions
yellow
Rate
fastest

A simple experiment shows the trend. Warm each halogenoalkane with aqueous silver nitrate in ethanol. Water hydrolyses the compound, and the halide ion released forms a precipitate with silver ions: Ag+(aq)+Br−(aq)→AgBr(s)\mathrm{Ag^+(aq) + Br^-(aq) \rightarrow AgBr(s)}Ag+(aq)+Br−(aq)→AgBr(s). Time how long the precipitate takes to appear.

Keep the volumes, concentrations, temperature and carbon chain the same, so the halogen is the only variable.

Common mistake

Fluorine is the most electronegative halogen, yet fluoroalkanes react slowest. The carbon–fluorine bond is the strongest, so bond enthalpy controls the rate.

Key term

precipitate

A precipitate is an insoluble solid that forms when two solutions react.

Part 5 done

6

Part 6 of 6: Hot ethanolic hydroxide removes hydrogen halide to form alkenes

Hydroxide ions can also react in a different way. In hot ethanolic sodium hydroxide, hydroxide acts as a base instead of a nucleophile. It removes a hydrogen ion from a carbon next to the one bonded to the halogen.

Electrons from the broken carbon–hydrogen bond form a double bond, and the halide ion leaves. The products are an alkene (a compound with a carbon–carbon double bond), a halide ion and water. This is elimination.

Substitution compared with elimination

FeatureSubstitutionElimination
Solventwaterethanol
Temperaturewarmhot
Role of hydroxidenucleophilebase
Organic productalcoholalkene
Feature
Solvent
Substitution
water
Elimination
ethanol
Feature
Temperature
Substitution
warm
Elimination
hot
Feature
Role of hydroxide
Substitution
nucleophile
Elimination
base
Feature
Organic product
Substitution
alcohol
Elimination
alkene

Exam tip

Always state the solvent. Warm aqueous hydroxide gives an alcohol, while hot ethanolic hydroxide gives an alkene.

Go deeperWhy more than one alkene can form

Some halogenoalkanes have hydrogen atoms on carbons at both sides of the carbon–halogen bond. Hydrogen can be removed from either side, so a mixture of alkenes may form.

For 2-bromobutane, loss of hydrogen from one side gives but-1-ene. Loss from the other side gives but-2-ene, which also exists as two geometric isomers.

Key terms · tap one for its definition

base

A base is a species that accepts a hydrogen ion.

elimination

Elimination is the removal of a small molecule from a saturated compound to leave a double bond.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by a nucleophile, and give the formula of one nucleophile that reacts with halogenoalkanes.

    Show mark schemeHide mark scheme

    Model answer

    A nucleophile is a species that donates a lone pair of electrons to form a covalent bond. An example is OH−\mathrm{OH^-}OH−.

    • 1 mark for stating that a nucleophile donates a lone pair of electrons
    • 1 mark for giving a correct formula such as OH−\mathrm{OH^-}OH−, CN−\mathrm{CN^-}CN− or NH3\mathrm{NH_3}NH3​
  2. 2.Describe[3 marks]

    Describe, in words, the movement of electrons when hydroxide ions react with bromoethane to form ethanol.

    Show mark schemeHide mark scheme

    Model answer

    A lone pair on the hydroxide ion forms a bond to the carbon bonded to bromine. The carbon–bromine bond breaks. Both bonding electrons go to bromine, which leaves as a bromide ion.

    • 1 mark for stating that a lone pair on the hydroxide ion forms a bond to the δ+\delta+δ+ carbon
    • 1 mark for stating that the carbon–bromine bond breaks
    • 1 mark for stating that both electrons of that bond go to bromine, forming a bromide ion
  3. 3.Explain[3 marks]

    Explain why iodoalkanes are hydrolysed faster than chloroalkanes.

    Show mark schemeHide mark scheme

    Model answer

    The carbon–iodine bond has a lower bond enthalpy than the carbon–chlorine bond. It is therefore easier to break. Bond enthalpy controls the rate, even though the carbon–chlorine bond is more polar.

    • 1 mark for stating that the C–I bond has a lower bond enthalpy than the C–Cl bond
    • 1 mark for stating that the C–I bond is easier to break so reaction is faster
    • 1 mark for stating that rate depends on bond enthalpy rather than polarity
  4. 4.Compare[3 marks]

    Compare the conditions and organic products when a halogenoalkane reacts with aqueous sodium hydroxide and with ethanolic sodium hydroxide.

    Show mark schemeHide mark scheme

    Model answer

    Aqueous sodium hydroxide is used warm and hydroxide acts as a nucleophile, giving an alcohol. Ethanolic sodium hydroxide is used hot and hydroxide acts as a base, giving an alkene.

    • 1 mark for identifying aqueous conditions with hydroxide as a nucleophile
    • 1 mark for identifying ethanolic hot conditions with hydroxide as a base
    • 1 mark for stating the products as an alcohol (aqueous) and an alkene (ethanolic)
  5. 5.Suggest[2 marks]

    Suggest why excess ammonia is used when making a primary amine from a halogenoalkane.

    Show mark schemeHide mark scheme

    Model answer

    The amine formed still has a lone pair and can act as a nucleophile. A large excess of ammonia makes it unlikely that the amine reacts with another halogenoalkane.

    • 1 mark for stating that the amine product can also act as a nucleophile
    • 1 mark for stating that excess ammonia makes further reaction unlikely
  6. 6.Name[2 marks]

    Name the organic product formed when 1-bromopropane is heated with potassium cyanide in aqueous ethanol, and state how its carbon chain differs from the reactant.

    Show mark schemeHide mark scheme

    Model answer

    The product is butanenitrile. Its carbon chain is one carbon atom longer.

    • 1 mark for naming butanenitrile
    • 1 mark for stating that the chain is one carbon longer

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the halogenoalkane that is hydrolysed fastest when the carbon chain is the same.
Show answer and explanation

Answer: D · Worked explanation

The carbon–iodine bond has the lowest bond enthalpy, so it breaks most easily. 1-fluorobutane is tempting because fluorine gives the most polar bond, but the carbon–fluorine bond is the strongest, which makes it the slowest to hydrolyse. Because the carbon–halogen bond must break in the slow step, the weakest bond gives the fastest hydrolysis.
4.

Medium·Identify[1 mark]

1-bromopropane is warmed with aqueous potassium hydroxide. Identify the organic product.
Show answer and explanation

Answer: B · Worked explanation

Aqueous hydroxide acts as a nucleophile and replaces bromine, so the product is propan-1-ol. Propene would form with hot ethanolic hydroxide acting as a base, not under aqueous conditions. The hydroxyl group sits on carbon 1 because that is where bromine was. Nucleophilic substitution leaves the carbon skeleton unchanged.
5.

Medium·Identify[1 mark]

A halogenoalkane is warmed with aqueous silver nitrate in ethanol. A cream precipitate forms. Identify the halogen in the halogenoalkane.
Show answer and explanation

Answer: C · Worked explanation

Hydrolysis releases a halide ion, which forms a silver halide. Silver bromide is cream. Chlorine would give a white precipitate and iodine a yellow one, so neither fits the colour observed. The colour of the silver halide is the key evidence, and it is why the same test can separate the three halogens.
6.

Medium·Calculate[1 mark]

The mean bond enthalpies are 346 kJ mol−1346\,\mathrm{kJ\,mol^{-1}}346kJmol−1 for C–Cl and 228 kJ mol−1228\,\mathrm{kJ\,mol^{-1}}228kJmol−1 for C–I. Calculate how much less energy per mole is needed to break C–I than C–Cl.
Show answer and explanation

Answer: D · Worked explanation

The difference is 346−228=118 kJ mol−1346-228=118\,\mathrm{kJ\,mol^{-1}}346−228=118kJmol−1. The value 574 comes from adding the two enthalpies instead of subtracting them. The smaller C–I enthalpy explains why iodoalkanes hydrolyse faster. Using the difference matters because the question asks how much less energy is needed. A smaller bond enthalpy means the bond breaks more easily, so hydrolysis is faster.
7.

Medium·Identify[1 mark]

Identify the conditions that make 2-bromopropane form propene.
Show answer and explanation

Answer: A · Worked explanation

Hot ethanolic hydroxide makes hydroxide act as a base, removing a hydrogen ion and forming an alkene by elimination. Warm aqueous hydroxide is a common wrong choice, but that gives substitution and an alcohol. The solvent decides between the two pathways, so the conditions must be stated. Cyanide in aqueous ethanol would give a nitrile, and excess ammonia in a sealed tube would give an amine.
8.

Hard·Identify[2 marks]

A chemist wants to make a compound with four carbon atoms from 1-bromopropane. Identify the reagent that achieves this in one step.
Show answer and explanation

Answer: B · Worked explanation

Only cyanide adds a carbon atom, because the carbon of the CN−\mathrm{CN^-}CN− ion joins the chain to give butanenitrile. Hydroxide and ammonia replace bromine without adding carbon. Ethanolic hydroxide also adds none, and it removes hydrogen bromide to give propene.
9.

Hard[2 marks]

Fluorine is more electronegative than iodine, yet 1-fluorobutane hydrolyses far more slowly than 1-iodobutane. Select the explanation.
Show answer and explanation

Answer: D · Worked explanation

Rate depends on how easily the carbon–halogen bond breaks, and the C–F bond is the strongest of the four. A common error is to say the C–F bond is less polar, but fluorine makes it more polar. The carbon in a C–F bond carries a partial positive charge.
10.

Hard[2 marks]

A student heats bromoethane with a small amount of ammonia and finds a mixture of products. Select the best explanation.
Show answer and explanation

Answer: B · Worked explanation

The primary amine formed still has a lone pair on nitrogen, so it acts as a nucleophile and attacks more bromoethane. A large excess of ammonia makes this unlikely. Bromoethane is primary, not tertiary, and bromide ions do not form nitriles.

Keep going

Next topic3.3.4 AlkenesPrevious topic3.3.2 Alkanes

More in Section 3.3 · Organic chemistry

  1. 3.3.1Introduction to organic chemistryNotes · 10 questions
  2. 3.3.2AlkanesNotes · 10 questions
  3. 3.3.3HalogenoalkanesNotes · 10 questions
  4. 3.3.4AlkenesNotes · 10 questions
  5. 3.3.5AlcoholsNotes · 10 questions
  6. 3.3.6Organic analysisNotes · 10 questions
  7. 3.3.7Optical isomerismNotes · 10 questions
  8. 3.3.8Aldehydes and ketonesNotes · 10 questions
  9. 3.3.9Carboxylic acids and derivativesNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1A halogenoalkane is an alkane with a halogen in place of hydrogen
  2. 2The polar carbon–halogen bond attracts nucleophiles
  3. 3Hydroxide ions replace the halogen to make an alcohol
  4. 4Cyanide and ammonia give nitriles and amines
  5. 5Weaker carbon–halogen bonds make hydrolysis faster
  6. 6Hot ethanolic hydroxide removes hydrogen halide to form alkenes
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe