Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Chemistry
  3. ›3.3 Organic chemistry
  4. ›3.3.4 Alkenes

AQA A-level Chemistry · Section 3.3 · Organic chemistry

3.3.4 Alkenes

Describe the bonding in alkenes, draw the mechanisms for addition of bromine and hydrogen bromide, and use bromine water to test for a double bond.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6A carbon–carbon double bond has one sigma and one pi bond
  1. 1A carbon–carbon double bond has one sigma and one pi bond
  2. 2The electron-rich pi bond attracts electrophiles
  3. 3Bromine adds to ethene through a carbocation
  4. 4Hydrogen bromide adds by the same mechanism
  5. 5Bromine water gives a quick test for a double bond
  6. 6Alkenes also add hydrogen and steam
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: A carbon–carbon double bond has one sigma and one pi bond

Ethene is far more reactive than ethane because of its double bond. Ethene belongs to the alkene family. Alkenes have the general formula CnH2n\mathrm{C_nH_{2n}}Cn​H2n​, so ethene is C2H4\mathrm{C_2H_4}C2​H4​ and propene is C3H6\mathrm{C_3H_6}C3​H6​.

The double bond is made of two different bonds. One is a sigma bond, the same kind found in alkanes. The other is a pi bond, formed by sideways overlap of p orbitals.

Each carbon in the double bond has three sigma bonds. These lie in one plane with bond angles of about 120°. The pi electron density sits above and below that plane. This restricts rotation about the double bond.

Common mistake

The double bond is not two identical bonds. The pi bond is weaker and more exposed than the sigma bond.

Go deeperRestricted rotation and E/Z isomers

Because the double bond cannot rotate freely, groups on each carbon stay fixed relative to each other. If each carbon of the double bond carries two different groups, two isomers can exist.

In but-2-ene, the E isomer has the two methyl groups on opposite sides of the double bond. The Z isomer has them on the same side.

Key terms · tap one for its definition

alkene

An organic compound containing a carbon–carbon double bond.

sigma bond

A sigma bond is a covalent bond formed by head-on overlap of orbitals, with electron density along the line between the nuclei.

pi bond

A pi bond is a covalent bond with electron density above and below the bond axis, formed by sideways overlap of p orbitals.

Part 1 done

2

Part 2 of 6: The electron-rich pi bond attracts electrophiles

The pi electrons sit outside the line between the nuclei, so they are exposed. They are also held less tightly than sigma electrons. A species attracted to this electron-rich region can react with the double bond.

Such a species is an electrophile. Positive ions and atoms with a partial positive charge often behave this way.

When the double bond opens, each carbon can bond to a new atom. The reaction is called electrophilic addition. The alkene becomes saturated, with only single bonds between its carbon atoms.

Exam tip

In a mechanism, the curly arrow for the alkene starts at the pi bond. Never start it from an atom.

Key terms · tap one for its definition

electrophile

An electrophile is a species that accepts a pair of electrons to form a covalent bond.

electrophilic addition

Electrophilic addition begins when an electrophile accepts an electron pair from a multiple bond.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the molecular formula of an alkene with four carbon atoms.
Show answer and explanation

Answer: A · Worked explanation

Alkenes have the general formula CnH2n\mathrm{C_nH_{2n}}Cn​H2n​, so four carbons give C4H8\mathrm{C_4H_8}C4​H8​. C4H10\mathrm{C_4H_{10}}C4​H10​ is the formula of an alkane with four carbons, which has no double bond. Counting hydrogens is a quick check, since an alkene has exactly twice as many hydrogen atoms as carbon atoms. Test every answer against this rule.
3

Part 3 of 6: Bromine adds to ethene through a carbocation

Bromine is non-polar, yet it attacks ethene. As it nears the double bond, the pi electrons repel the bonding pair in Br2\mathrm{Br_2}Br2​. This induces a dipole, making the nearer bromine atom slightly positive.

The pi electrons then form a bond to that δ+\delta+δ+ bromine atom. The Br–Br bond breaks, and both electrons go to the other bromine. This uneven split is heterolytic fission. It leaves a bromide ion and a carbocation.

Figure 1. The pi bond attacks one bromine atom, forming a carbocation and a bromide ion. The bromide ion then bonds to the positive carbon.

In the second step, the bromide ion donates a lone pair to the positive carbon. This forms 1,2-dibromoethane. Overall: CH2=CH2(g)+Br2(l)→BrCH2CH2Br(l)\mathrm{CH_2{=}CH_2(g) + Br_2(l) \rightarrow BrCH_2CH_2Br(l)}CH2​=CH2​(g)+Br2​(l)→BrCH2​CH2​Br(l).

Key terms · tap one for its definition

heterolytic fission

Heterolytic fission is the breaking of a covalent bond so that both bonding electrons go to one atom, forming two ions.

carbocation

A carbocation is an ion in which a carbon atom with only three bonds carries a positive charge.

Part 3 done

4

Part 4 of 6: Hydrogen bromide adds by the same mechanism

Hydrogen bromide is already polar. The hydrogen carries δ+\delta+δ+ and the bromine carries δ−\delta-δ−. The hydrogen acts as the electrophile, and a carbocation and bromide ion form.

Ethene then gives bromoethane, CH3CH2Br\mathrm{CH_3CH_2Br}CH3​CH2​Br. Propene is an unsymmetrical alkene, because its two double-bond carbons carry different groups. Hydrogen can add to either carbon, so two carbocations are possible.

Propene and hydrogen bromide

CarbocationTypeProductAmount
CH3CH+CH3\mathrm{CH_3CH^+CH_3}CH3​CH+CH3​secondary2-bromopropanemajor
CH3CH2CH2+\mathrm{CH_3CH_2CH_2^+}CH3​CH2​CH2+​primary1-bromopropaneminor
Carbocation
CH3CH+CH3\mathrm{CH_3CH^+CH_3}CH3​CH+CH3​
Type
secondary
Product
2-bromopropane
Amount
major
Carbocation
CH3CH2CH2+\mathrm{CH_3CH_2CH_2^+}CH3​CH2​CH2+​
Type
primary
Product
1-bromopropane
Amount
minor

Alkyl groups push electron density towards the positive carbon and help to stabilise it. A secondary carbocation has two such groups, so it is more stable than a primary one. It forms faster and gives the major product.

Key term

unsymmetrical alkene

An unsymmetrical alkene has different groups attached to the two carbon atoms of its double bond.

Part 4 done

Quick check

One question on the part you just read

Easy

State the observation when ethene is shaken with orange bromine water.
Show answer and explanation

Answer: D · Worked explanation

Bromine adds across the double bond by electrophilic addition, so the orange colour disappears. Staying orange is the result for an alkane, which has no double bond to react with. The orange colour is due to bromine, so its loss shows that bromine has reacted. This is the standard test for a carbon–carbon double bond.
5

Part 5 of 6: Bromine water gives a quick test for a double bond

Alkenes are unsaturated, so they can add atoms across the double bond. Alkanes are saturated and cannot. This difference gives a quick test. Shake the compound with orange bromine water at room temperature.

An alkene reacts with the bromine by electrophilic addition, so the orange colour disappears. The mixture becomes colourless. An alkane does not react, so the mixture stays orange.

Bromine water test

CompoundObservationConclusion
alkeneorange to colourlessdouble bond present
alkanestays orangeno double bond
Compound
alkene
Observation
orange to colourless
Conclusion
double bond present
Compound
alkane
Observation
stays orange
Conclusion
no double bond

A negative result is just as informative. A compound that leaves bromine water orange has no carbon–carbon double bond. The test cannot show which alkene is present.

Exam tip

Write that the mixture turns from orange to colourless. Do not write that it turns clear.

Key term

unsaturated

An unsaturated compound contains at least one carbon–carbon multiple bond.

Part 5 done

6

Part 6 of 6: Alkenes also add hydrogen and steam

Other small molecules can add across the double bond. Hydrogen adds over a heated nickel catalyst, turning an alkene into an alkane. Steam adds over a phosphoric acid catalyst at high temperature and pressure.

The addition of water is hydration, and it produces an alcohol. For ethene, the equation is C2H4(g)+H2O(g)⇌C2H5OH(g)\mathrm{C_2H_4(g) + H_2O(g) \rightleftharpoons C_2H_5OH(g)}C2​H4​(g)+H2​O(g)⇌C2​H5​OH(g).

Addition reactions of alkenes

ReagentConditionsProduct
H2\mathrm{H_2}H2​heated, nickel catalystalkane
Br2\mathrm{Br_2}Br2​room temperaturedibromoalkane
HBrroom temperaturebromoalkane
H2O\mathrm{H_2O}H2​Osteam, phosphoric acid catalyst, high temperature and pressurealcohol
Reagent
H2\mathrm{H_2}H2​
Conditions
heated, nickel catalyst
Product
alkane
Reagent
Br2\mathrm{Br_2}Br2​
Conditions
room temperature
Product
dibromoalkane
Reagent
HBr
Conditions
room temperature
Product
bromoalkane
Reagent
H2O\mathrm{H_2O}H2​O
Conditions
steam, phosphoric acid catalyst, high temperature and pressure
Product
alcohol

Without the catalysts, the hydrogen and steam reactions are too slow to be useful. The conditions in the table are the ones to learn.

Each reaction has one product, so all of the atoms in the reactants end up in it.

Key term

hydration

Hydration is a reaction in which water adds across a carbon–carbon double bond.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe how a sigma bond and a pi bond differ in the way they are formed.

    Show mark schemeHide mark scheme

    Model answer

    A sigma bond forms by head-on overlap of orbitals, with electron density between the nuclei. A pi bond forms by sideways overlap of p orbitals, with electron density above and below the bond axis.

    • 1 mark for describing head-on overlap and electron density between the nuclei for the sigma bond
    • 1 mark for describing sideways overlap of p orbitals and electron density above and below the axis for the pi bond
  2. 2.Explain[3 marks]

    Explain why alkenes are more reactive than alkanes.

    Show mark schemeHide mark scheme

    Model answer

    The double bond contains a pi bond, with electron density above and below the plane of the molecule. This electron-rich region is exposed and attracts electrophiles. The pi bond is also held less tightly than a sigma bond.

    • 1 mark for stating that alkenes contain a pi bond or region of high electron density
    • 1 mark for stating that this region attracts electrophiles
    • 1 mark for stating that the pi bond is weaker or more exposed than a sigma bond
  3. 3.Describe[4 marks]

    Describe the mechanism for the reaction of ethene with bromine, in words.

    Show mark schemeHide mark scheme

    Model answer

    As bromine approaches, the pi electrons induce a dipole in the Br–Br bond. The pi electrons form a bond to the δ+\delta+δ+ bromine, and the Br–Br bond breaks heterolytically. This gives a carbocation and a bromide ion. The bromide ion donates a lone pair to the positive carbon, forming 1,2-dibromoethane.

    • 1 mark for stating that bromine becomes polarised or has an induced dipole near the double bond
    • 1 mark for stating that the pi electrons form a bond to the δ+\delta+δ+ bromine and the Br–Br bond breaks, forming a carbocation and a bromide ion
    • 1 mark for stating that the bromide ion donates a lone pair to the positive carbon
    • 1 mark for naming the product as 1,2-dibromoethane
  4. 4.Explain[3 marks]

    Explain why propene and hydrogen bromide give mainly 2-bromopropane.

    Show mark schemeHide mark scheme

    Model answer

    Hydrogen can add to either carbon of the double bond, giving a primary or a secondary carbocation. The secondary carbocation is more stable because it has two alkyl groups pushing electron density towards the positive carbon. It forms faster, so 2-bromopropane is the major product.

    • 1 mark for stating that two carbocations are possible, primary and secondary
    • 1 mark for stating that the secondary carbocation is more stable because of two alkyl groups
    • 1 mark for linking the more stable carbocation to the major product 2-bromopropane
  5. 5.Compare[2 marks]

    Compare what is observed when bromine water is shaken with hex-1-ene and with hexane.

    Show mark schemeHide mark scheme

    Model answer

    With hex-1-ene the orange bromine water turns colourless. With hexane the mixture stays orange.

    • 1 mark for stating that hex-1-ene turns bromine water from orange to colourless
    • 1 mark for stating that hexane leaves it orange

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the part of an alkene molecule that is attacked by an electrophile.
Show answer and explanation

Answer: B · Worked explanation

The pi bond has electron density above and below the plane, so it is exposed and attracts electrophiles. The sigma bond is tempting because it is also part of the double bond, but its electrons lie between the nuclei and are held more tightly.
4.

Medium·State[1 mark]

State the approximate bond angle around each carbon atom of the double bond in ethene.
Show answer and explanation

Answer: C · Worked explanation

Each carbon has three sigma bonds lying in one plane, so the angle is about 120∘120^{\circ}120∘. The value 109.5∘109.5^{\circ}109.5∘ applies to carbon atoms with four sigma bonds, as in alkanes. The pi bond lies above and below the plane of the three sigma bonds. Four sigma bonds would give a tetrahedral arrangement instead, and a linear 180∘180^{\circ}180∘ arrangement would need only two.
5.

Medium·Identify[1 mark]

Ethene reacts with hydrogen bromide at room temperature. Identify the organic product.
Show answer and explanation

Answer: D · Worked explanation

Hydrogen and bromine add across the double bond, giving bromoethane. 1,2-dibromoethane is the product with bromine, not hydrogen bromide, because it needs two bromine atoms. The hydrogen bonds to one carbon and the bromine to the other, so the double bond is replaced by a single bond. Only one product forms from ethene because the molecule is symmetrical.
6.

Medium·Identify[1 mark]

Propene reacts with hydrogen bromide. Identify the major product.
Show answer and explanation

Answer: A · Worked explanation

The hydrogen adds to the terminal carbon, giving a secondary carbocation that is more stable. Bromide then attacks it, forming 2-bromopropane. 1-bromopropane comes from the less stable primary carbocation and is the minor product. Drawing both possible carbocations is the safest method, because the more stable one decides the major product. Hydrogen adding to the other carbon would give a primary carbocation, which forms more slowly.
7.

Medium[1 mark]

In the second step of ethene reacting with bromine, identify what attacks the carbocation.
Show answer and explanation

Answer: B · Worked explanation

The bromide ion has a lone pair and bonds to the positive carbon, forming 1,2-dibromoethane. A bromine molecule is not the attacker in this step, because the carbocation is positive and needs electrons rather than an electron acceptor. The positive carbon needs electrons, so the attacker must be electron-rich. Bromide fits, and it completes the addition across the double bond.
8.

Hard·Calculate[2 marks]

Ethene of mass 1.40 g1.40\,\mathrm{g}1.40g reacts completely with bromine. Calculate the maximum mass of 1,2-dibromoethane formed. Use ArA_\mathrm{r}Ar​: C = 12.0, H = 1.0, Br = 79.9.
Show answer and explanation

Answer: D · Worked explanation

Moles of ethene =1.4028.0=0.0500 mol=\frac{1.40}{28.0}=0.0500\,\mathrm{mol}=28.01.40​=0.0500mol. One mole gives one mole of C2H4Br2\mathrm{C_2H_4Br_2}C2​H4​Br2​, whose MrM_\mathrm{r}Mr​ is 24.0+4.0+159.8=187.824.0+4.0+159.8=187.824.0+4.0+159.8=187.8. Mass =0.0500×187.8=9.39 g=0.0500\times187.8=9.39\,\mathrm{g}=0.0500×187.8=9.39g. The value 7.99 g7.99\,\mathrm{g}7.99g is the mass of bromine alone, not of the product. Compare the formulae as well as the mass. Ethene is C2H4\mathrm{C_2H_4}C2​H4​ and the product is C2H4Br2\mathrm{C_2H_4Br_2}C2​H4​Br2​, so only bromine adds and the carbon skeleton is unchanged.
9.

Hard[2 marks]

But-1-ene reacts with hydrogen bromide to give mainly 2-bromobutane. Select the correct explanation.
Show answer and explanation

Answer: B · Worked explanation

Hydrogen adds to the terminal carbon, giving a secondary carbocation. Two alkyl groups push electron density towards the positive carbon and stabilise it. Fewer alkyl groups would make the primary carbocation less stable, not more. The same reasoning applies to any unsymmetrical alkene. The stability of the carbocation, not the position of the double bond, decides which product is major.
10.

Hard·Determine[2 marks]

A colourless liquid has the molecular formula C6H12\mathrm{C_6H_{12}}C6​H12​ and stays orange when shaken with bromine water. Determine which compound it could be.
Show answer and explanation

Answer: C · Worked explanation

Both hexenes have the formula C6H12\mathrm{C_6H_{12}}C6​H12​ but would decolourise bromine water, as they contain a double bond. Hexane does not match the formula, since it is C6H14\mathrm{C_6H_{14}}C6​H14​. Cyclohexane is C6H12\mathrm{C_6H_{12}}C6​H12​ with no double bond, so it fits both observations. A molecular formula alone cannot confirm a double bond. A ring can use up the same two hydrogen atoms, so the bromine water test is needed.

Keep going

Next topic3.3.5 AlcoholsPrevious topic3.3.3 Halogenoalkanes

More in Section 3.3 · Organic chemistry

  1. 3.3.1Introduction to organic chemistryNotes · 10 questions
  2. 3.3.2AlkanesNotes · 10 questions
  3. 3.3.3HalogenoalkanesNotes · 10 questions
  4. 3.3.4AlkenesNotes · 10 questions
  5. 3.3.5AlcoholsNotes · 10 questions
  6. 3.3.6Organic analysisNotes · 10 questions
  7. 3.3.7Optical isomerismNotes · 10 questions
  8. 3.3.8Aldehydes and ketonesNotes · 10 questions
  9. 3.3.9Carboxylic acids and derivativesNotes · 10 questions

All AQA A-level Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1A carbon–carbon double bond has one sigma and one pi bond
  2. 2The electron-rich pi bond attracts electrophiles
  3. 3Bromine adds to ethene through a carbocation
  4. 4Hydrogen bromide adds by the same mechanism
  5. 5Bromine water gives a quick test for a double bond
  6. 6Alkenes also add hydrogen and steam
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe