Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.1 Measurements and their errors
  4. ›3.1.1 SI units and prefixes

AQA A-level Physics · Section 3.1 · Measurements and their errors

3.1.1 SI units and prefixes

List the SI base units, convert between units using prefixes, and write unit symbols correctly in calculations.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Every measurement is a number multiplied by a unit
  1. 1Every measurement is a number multiplied by a unit
  2. 2A small set of base units defines all the others
  3. 3Derived units are combinations of base units
  4. 4Prefixes scale a unit by a power of ten
  5. 5Convert by replacing the prefix with its multiplier
  6. 6Unit symbols follow strict rules about case and spacing
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Every measurement is a number multiplied by a unit

A recipe that says “add 200” is no use until you know whether it means grams or millilitres. Physics has the same problem. A physical quantity is a property we can measure, and it needs both a number and a unit.

Scientists use one agreed system so that results can be shared and compared. Each of its units is an SI unit, taken from the International System of Units. Using it avoids confusion between local units.

Write the unit every time you write the number. An answer without a unit is incomplete.

Key terms · tap one for its definition

physical quantity

A physical quantity is a measurable property of an object or system, written as a numerical value multiplied by a unit.

SI unit

An SI unit is a unit of the International System, in which every unit is defined from seven base units.

Part 1 done

2

Part 2 of 6: A small set of base units defines all the others

Every SI unit grows out of a small starting set. Seven quantities are chosen as the starting point, and the unit of each is a base unit. All other SI units are built from these by multiplying and dividing.

The table shows the six used most at this level. A seventh, the candela for luminous intensity, is rarely needed.

Base quantities and their SI base units

QuantityBase unitSymbol
Masskilogramkg
Lengthmetrem
Timeseconds
Electric currentampereA
TemperaturekelvinK
Amount of substancemolemol
Quantity
Mass
Base unit
kilogram
Symbol
kg
Quantity
Length
Base unit
metre
Symbol
m
Quantity
Time
Base unit
second
Symbol
s
Quantity
Electric current
Base unit
ampere
Symbol
A
Quantity
Temperature
Base unit
kelvin
Symbol
K
Quantity
Amount of substance
Base unit
mole
Symbol
mol

The kilogram is the only base unit whose name includes a prefix. Its symbol, kg, already contains the prefix k.

Common mistake

Do not treat the gram as the base unit of mass. Convert grams to kilograms before using any SI equation.

Key term

base unit

A base unit is one of the seven fundamental SI units from which all other SI units are defined.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify which of these is an SI base unit.
Show answer and explanation

Answer: B · Worked explanation

The kilogram is the base unit of mass. The newton, joule and pascal are derived units, because each is built from base units: for example, the newton is kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2. The gram is a common mass unit, but it is the kilogram that the SI treats as the base unit.
3

Part 3 of 6: Derived units are combinations of base units

Speed is not one of the base quantities, yet we measure it every day. A derived unit is made by multiplying or dividing base units. Speed is length divided by time, so its unit is m s−1\mathrm{m\,s^{-1}}ms−1.

Some derived units have their own names. Each comes from an equation linking the quantity to others.

Force FFF equals mass mmm times acceleration aaa, so F=maF=maF=ma. Acceleration has the unit m s−2\mathrm{m\,s^{-2}}ms−2. The same method gives these units:

  • newton, from F=maF=maF=ma: N=kg m s−2\mathrm{N}=\mathrm{kg\,m\,s^{-2}}N=kgms−2
  • joule, from force times distance: J=N m=kg m2 s−2\mathrm{J}=\mathrm{N\,m}=\mathrm{kg\,m^{2}\,s^{-2}}J=Nm=kgm2s−2
  • watt, from energy per unit time: W=J s−1=kg m2 s−3\mathrm{W}=\mathrm{J\,s^{-1}}=\mathrm{kg\,m^{2}\,s^{-3}}W=Js−1=kgm2s−3
  • pascal, from force per unit area: Pa=N m−2=kg m−1 s−2\mathrm{Pa}=\mathrm{N\,m^{-2}}=\mathrm{kg\,m^{-1}\,s^{-2}}Pa=Nm−2=kgm−1s−2
Go deeperChecking an equation by comparing units

Both sides of a correct equation must have the same base units. Take v=u+atv=u+atv=u+at, where vvv is final velocity, uuu is initial velocity, aaa is acceleration and ttt is time. The terms vvv and uuu have unit m s−1\mathrm{m\,s^{-1}}ms−1. The term atatat has unit m s−2 s=m s−1\mathrm{m\,s^{-2}}\,\mathrm{s}=\mathrm{m\,s^{-1}}ms−2s=ms−1, so the units agree.

Matching units do not prove an equation is right. A missing number, such as a factor of 2, cannot be detected this way. A mismatch, however, always shows a mistake.

Key term

derived unit

A derived unit is an SI unit formed from base units by multiplication or division, such as the newton, kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2.

Part 3 done

4

Part 4 of 6: Prefixes scale a unit by a power of ten

A wire 0.5 mm wide and a road 2.4 km long both use prefixes. Many quantities are far too large or small for the base unit alone. A prefix is placed before a unit symbol to multiply that unit by a power of ten. For example, 1 km is 1000 m.

The table lists the prefixes you need most often. Learn their symbols and values. Centi, symbol c, is 10−210^{-2}10−2. Pico, symbol p, is 10−1210^{-12}10−12, and tera, symbol T, is 101210^{12}1012.

Common prefixes and their multipliers

PrefixSymbolMultiplier
nanon10−910^{-9}10−9
microµ10−610^{-6}10−6
millim10−310^{-3}10−3
kilok10310^{3}103
megaM10610^{6}106
gigaG10910^{9}109
Prefix
nano
Symbol
n
Multiplier
10−910^{-9}10−9
Prefix
micro
Symbol
µ
Multiplier
10−610^{-6}10−6
Prefix
milli
Symbol
m
Multiplier
10−310^{-3}10−3
Prefix
kilo
Symbol
k
Multiplier
10310^{3}103
Prefix
mega
Symbol
M
Multiplier
10610^{6}106
Prefix
giga
Symbol
G
Multiplier
10910^{9}109
Figure 1. Each step to the right multiplies the unit by 1000. The unit without a prefix sits in the middle.

Moving one step along the prefix ladder, counting the unprefixed unit as a step, changes the multiplier by 1000. So 1 Mm is 1000 km.

Key term

prefix

A prefix is a letter placed before a unit symbol that multiplies the unit by a fixed power of ten.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the symbol for the prefix micro.
Show answer and explanation

Answer: A · Worked explanation

The prefix micro has the symbol µ, which stands for 10−610^{-6}10−6. A lower-case m means milli, which is 10−310^{-3}10−3. A capital M means mega, which is 10610^{6}106. The symbol n means nano, or 10−910^{-9}10−9. These prefixes are easily confused unless you learn both the letter and its case.
5

Part 5 of 6: Convert by replacing the prefix with its multiplier

Calculations need base units, because derived units such as the newton assume them. Remove the prefix first. To convert, replace the prefix with its power of ten. Thus 35 cm becomes 35×10−2 m35\times10^{-2}\,\mathrm{m}35×10−2m, which is 0.35 m.

To convert the other way, divide by the multiplier. So 4500 m is 4.5 km. A smaller unit always gives a larger number for the same quantity.

Areas and volumes need extra care. The prefix is squared or cubed along with the unit.

Common mistake

Do not square only the number. Since 1 cm=10−2 m1\,\mathrm{cm}=10^{-2}\,\mathrm{m}1cm=10−2m, a square centimetre is 10−4 m210^{-4}\,\mathrm{m^{2}}10−4m2, not 10−2 m210^{-2}\,\mathrm{m^{2}}10−2m2.

Worked example

Using prefixes in a calculation

A trolley travels 35 cm in 250 ms. Calculate its average speed in m s−1\mathrm{m\,s^{-1}}ms−1.
  1. 1
    Convert the distance: 35 cm=35×10−2 m=0.35 m35\,\mathrm{cm}=35\times10^{-2}\,\mathrm{m}=0.35\,\mathrm{m}35cm=35×10−2m=0.35m.
  2. 2
    Convert the time: 250 ms=250×10−3 s=0.250 s250\,\mathrm{ms}=250\times10^{-3}\,\mathrm{s}=0.250\,\mathrm{s}250ms=250×10−3s=0.250s.
  3. 3
    Use average speed=distancetime\mathrm{average~speed}=\frac{\mathrm{distance}}{\mathrm{time}}average speed=timedistance​.
  4. 4
    Substitute: 0.35 m0.250 s=1.4 m s−1\frac{0.35\,\mathrm{m}}{0.250\,\mathrm{s}}=1.4\,\mathrm{m\,s^{-1}}0.250s0.35m​=1.4ms−1.

Answer: The average speed is 1.4 m s−11.4\,\mathrm{m\,s^{-1}}1.4ms−1.

Part 5 done

6

Part 6 of 6: Unit symbols follow strict rules about case and spacing

A correct conversion can still lose marks if the symbols are written badly. These rules cover most cases.

  • Capitalise symbols of units named after a person, such as N, J and W.
  • Write other unit symbols in lower case, such as m, kg and s.
  • Never add an s for a plural: write 5 kg, not 5 kgs.
  • Leave a space between the number and the unit, and between unit symbols.
  • Use negative indices, writing m s−1\mathrm{m\,s^{-1}}ms−1 rather than m/s.

Prefix case matters too. A capital M means mega, but a lower-case m means milli. So 5 ms is five milliseconds, whereas 5 Ms is five million seconds.

Exam tip

Write the unit on every line of working. Cancelling units often shows that an equation was rearranged wrongly.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[4 marks]

    State the SI base unit, with its symbol, for each of mass, length, time and electric current.

    Show mark schemeHide mark scheme

    Model answer

    Mass: kilogram, kg. Length: metre, m. Time: second, s. Electric current: ampere, A.

    • 1 mark for stating kilogram (kg) for mass
    • 1 mark for stating metre (m) for length
    • 1 mark for stating second (s) for time
    • 1 mark for stating ampere (A) for electric current
  2. 2.Explain[2 marks]

    Explain why the newton can be written as kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2.

    Show mark schemeHide mark scheme

    Model answer

    Force is mass multiplied by acceleration. Acceleration has the unit m s−2\mathrm{m\,s^{-2}}ms−2, so force has the unit kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2.

    • 1 mark for stating that force equals mass multiplied by acceleration
    • 1 mark for stating that acceleration has the unit m s−2\mathrm{m\,s^{-2}}ms−2 and combining it with the kilogram
  3. 3.Calculate[3 marks]

    Calculate the speed, in m s−1\mathrm{m\,s^{-1}}ms−1, of a signal that travels 45 mm in 150 µs.

    Show mark schemeHide mark scheme

    Model answer

    Distance =45 mm=4.5×10−2 m=45\,\mathrm{mm}=4.5\times10^{-2}\,\mathrm{m}=45mm=4.5×10−2m and time =150 µs=1.5×10−4 s=150\,\mathrm{µs}=1.5\times10^{-4}\,\mathrm{s}=150µs=1.5×10−4s. Speed =4.5×10−2 m1.5×10−4 s=3.0×102 m s−1=\frac{4.5\times10^{-2}\,\mathrm{m}}{1.5\times10^{-4}\,\mathrm{s}}=3.0\times10^{2}\,\mathrm{m\,s^{-1}}=1.5×10−4s4.5×10−2m​=3.0×102ms−1.

    • 1 mark for converting 45 mm to 4.5×10−2 m4.5\times10^{-2}\,\mathrm{m}4.5×10−2m
    • 1 mark for converting 150 µs to 1.5×10−4 s1.5\times10^{-4}\,\mathrm{s}1.5×10−4s
    • 1 mark for obtaining 3.0×102 m s−13.0\times10^{2}\,\mathrm{m\,s^{-1}}3.0×102ms−1
  4. 4.Give[2 marks]

    Give two errors in writing a mass as 5 Kgs.

    Show mark schemeHide mark scheme

    Model answer

    The K should be lower case, because the symbol is kg. The s should not be added, because unit symbols have no plural form.

    • 1 mark for stating that the symbol must be kg with a lower-case k
    • 1 mark for stating that unit symbols do not take a plural s
  5. 5.Calculate[2 marks]

    Calculate the volume, in m3\mathrm{m^{3}}m3, of 250 cm3250\,\mathrm{cm^{3}}250cm3 of water.

    Show mark schemeHide mark scheme

    Model answer

    Since 1 cm=10−2 m1\,\mathrm{cm}=10^{-2}\,\mathrm{m}1cm=10−2m, 1 cm3=10−6 m31\,\mathrm{cm^{3}}=10^{-6}\,\mathrm{m^{3}}1cm3=10−6m3. The volume is 250×10−6 m3=2.5×10−4 m3250\times10^{-6}\,\mathrm{m^{3}}=2.5\times10^{-4}\,\mathrm{m^{3}}250×10−6m3=2.5×10−4m3.

    • 1 mark for using 1 cm3=10−6 m31\,\mathrm{cm^{3}}=10^{-6}\,\mathrm{m^{3}}1cm3=10−6m3
    • 1 mark for obtaining 2.5×10−4 m32.5\times10^{-4}\,\mathrm{m^{3}}2.5×10−4m3
  6. 6.Explain[2 marks]

    Explain why a prefixed value, such as 3.2 mm, should be converted before it is used in an equation containing newtons.

    Show mark schemeHide mark scheme

    Model answer

    The newton is defined using the base units kilogram, metre and second. A value left in millimetres would give an answer that is wrong by a power of ten, or in the wrong unit.

    • 1 mark for stating that derived units such as the newton are defined from base units (metre, kilogram, second)
    • 1 mark for stating that an unconverted prefix would make the answer wrong by a power of ten or give the wrong unit

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the multiplier represented by the prefix giga.
Show answer and explanation

Answer: C · Worked explanation

Giga, symbol G, means 10910^{9}109, so 1 GW is 109 W10^{9}\,\mathrm{W}109W. The multiplier 10610^{6}106 belongs to mega, and 101210^{12}1012 belongs to tera. The multiplier 10−910^{-9}10−9 belongs to nano, which has the same size of exponent but is a small-scale prefix, so it is easily mixed up with giga.
4.

Medium[1 mark]

A current is 2.4 mA. Express it in amperes.
Show answer and explanation

Answer: D · Worked explanation

Milli means 10−310^{-3}10−3, so 2.4 mA=2.4×10−3 A2.4\,\mathrm{mA}=2.4\times10^{-3}\,\mathrm{A}2.4mA=2.4×10−3A. The value 2.4×10−6 A2.4\times10^{-6}\,\mathrm{A}2.4×10−6A uses the micro multiplier by mistake. The value 2.4×103 A2.4\times10^{3}\,\mathrm{A}2.4×103A multiplies by 1000 instead of dividing, which would be the correct step for a current given in kiloamperes. The value 2.4×10−1 A2.4\times10^{-1}\,\mathrm{A}2.4×10−1A moves the decimal point by only one place, which matches no prefix at all.
5.

Medium[2 marks]

A length is 650 nm. Express it in metres.
Show answer and explanation

Answer: A · Worked explanation

Nano means 10−910^{-9}10−9, so 650 nm=650×10−9 m=6.5×10−7 m650\,\mathrm{nm}=650\times10^{-9}\,\mathrm{m}=6.5\times10^{-7}\,\mathrm{m}650nm=650×10−9m=6.5×10−7m. The value 6.5×10−4 m6.5\times10^{-4}\,\mathrm{m}6.5×10−4m treats nano as 10−610^{-6}10−6. The value 6.5×10−9 m6.5\times10^{-9}\,\mathrm{m}6.5×10−9m forgets that 650 is 6.5×1026.5\times10^{2}6.5×102, so it is a hundred times too small. The value 6.5×1011 m6.5\times10^{11}\,\mathrm{m}6.5×1011m multiplies by 10910^{9}109 instead of by 10−910^{-9}10−9, so it is wrong in direction as well as size.
6.

Medium·Determine[2 marks]

Determine the base units of the pascal, given that 1 Pa=1 N m−21\,\mathrm{Pa}=1\,\mathrm{N\,m^{-2}}1Pa=1Nm−2.
Show answer and explanation

Answer: C · Worked explanation

The newton is kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2. Dividing by m2\mathrm{m^{2}}m2 gives kg m−1 s−2\mathrm{kg\,m^{-1}\,s^{-2}}kgm−1s−2. The expression kg m s−2\mathrm{kg\,m\,s^{-2}}kgms−2 is the unit of force itself. The expression kg m−2 s−2\mathrm{kg\,m^{-2}\,s^{-2}}kgm−2s−2 comes from dropping the metre in the newton before dividing by m2\mathrm{m^{2}}m2. Writing the unit of a derived quantity in base units like this is a good check on a rearranged equation.
7.

Medium·Identify[1 mark]

Identify the correct way to write a speed of fifteen metres per second.
Show answer and explanation

Answer: B · Worked explanation

The unit is metres multiplied by seconds to the power -1, written m s−1\mathrm{m\,s^{-1}}ms−1 with a space between the symbols. Without the space, ms−1\mathrm{ms^{-1}}ms−1 reads as milliseconds to the power -1, which is a different unit. A capital M means mega, and the index -2 belongs to acceleration, not speed.
8.

Hard·Calculate[2 marks]

A sample has a mass of 45 g and a volume of 15 cm315\,\mathrm{cm^{3}}15cm3. Density is mass divided by volume. Calculate the density in kg m−3\mathrm{kg\,m^{-3}}kgm−3.
Show answer and explanation

Answer: D · Worked explanation

Convert first: 45 g=0.045 kg45\,\mathrm{g}=0.045\,\mathrm{kg}45g=0.045kg and 15 cm3=1.5×10−5 m315\,\mathrm{cm^{3}}=1.5\times10^{-5}\,\mathrm{m^{3}}15cm3=1.5×10−5m3. Then 0.045 kg1.5×10−5 m3=3.0×103 kg m−3\frac{0.045\,\mathrm{kg}}{1.5\times10^{-5}\,\mathrm{m^{3}}}=3.0\times10^{3}\,\mathrm{kg\,m^{-3}}1.5×10−5m30.045kg​=3.0×103kgm−3. The value 3.0 comes from 4515\frac{45}{15}1545​ with no conversions. The value 3.0×1063.0\times10^{6}3.0×106 leaves the mass in grams. The value 3.0×10−13.0\times10^{-1}3.0×10−1 uses 10−210^{-2}10−2 for a cubic centimetre instead of 10−610^{-6}10−6. Convert both quantities before dividing.
9.

Hard·Calculate[2 marks]

A heater has a power of 2.5 kW and runs for 40 s. Given that 1 W=1 J s−11\,\mathrm{W}=1\,\mathrm{J\,s^{-1}}1W=1Js−1, calculate the energy transferred in kJ.
Show answer and explanation

Answer: A · Worked explanation

Convert the power: 2.5 kW=2.5×103 W2.5\,\mathrm{kW}=2.5\times10^{3}\,\mathrm{W}2.5kW=2.5×103W. Energy is power multiplied by time, so 2.5×103 J s−1×40 s=1.0×105 J2.5\times10^{3}\,\mathrm{J\,s^{-1}}\times40\,\mathrm{s}=1.0\times10^{5}\,\mathrm{J}2.5×103Js−1×40s=1.0×105J, which is 1.0×102 kJ1.0\times10^{2}\,\mathrm{kJ}1.0×102kJ. The value 1.0×105 kJ1.0\times10^{5}\,\mathrm{kJ}1.0×105kJ keeps the number in joules but attaches the kilojoule unit. The value 1.0×102 J1.0\times10^{2}\,\mathrm{J}1.0×102J treats kilowatts as watts. The value 1.0×10−1 kJ1.0\times10^{-1}\,\mathrm{kJ}1.0×10−1kJ is that same error converted to kilojoules.
10.

Hard[2 marks]

A sheet has an area of 3.0 cm23.0\,\mathrm{cm^{2}}3.0cm2. Express this area in m2\mathrm{m^{2}}m2.
Show answer and explanation

Answer: C · Worked explanation

Since 1 cm=10−2 m1\,\mathrm{cm}=10^{-2}\,\mathrm{m}1cm=10−2m, 1 cm2=(10−2)2 m2=10−4 m21\,\mathrm{cm^{2}}=(10^{-2})^{2}\,\mathrm{m^{2}}=10^{-4}\,\mathrm{m^{2}}1cm2=(10−2)2m2=10−4m2, so 3.0 cm23.0\,\mathrm{cm^{2}}3.0cm2 is 3.0×10−4 m23.0\times10^{-4}\,\mathrm{m^{2}}3.0×10−4m2. The value 3.0×10−2 m23.0\times10^{-2}\,\mathrm{m^{2}}3.0×10−2m2 squares only the number and leaves the multiplier unsquared, which is the most common slip. The value 3.0×10−6 m23.0\times10^{-6}\,\mathrm{m^{2}}3.0×10−6m2 cubes the multiplier, and 3.0×104 m23.0\times10^{4}\,\mathrm{m^{2}}3.0×104m2 multiplies by 10410^{4}104 instead of dividing. Whenever a unit is squared, apply the same power to the prefix.

Keep going

Next topic3.1.2 Limits of measurement

More in Section 3.1 · Measurements and their errors

  1. 3.1.1SI units and prefixesNotes · 10 questions
  2. 3.1.2Limits of measurementNotes · 10 questions
  3. 3.1.3Estimating physical quantitiesNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Every measurement is a number multiplied by a unit
  2. 2A small set of base units defines all the others
  3. 3Derived units are combinations of base units
  4. 4Prefixes scale a unit by a power of ten
  5. 5Convert by replacing the prefix with its multiplier
  6. 6Unit symbols follow strict rules about case and spacing
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe