Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.11 Option: Engineering physics
  4. ›3.11.1 Rotational dynamics

AQA A-level Physics · Section 3.11 · Option: Engineering physics

3.11.1 Rotational dynamics

Describe moment of inertia, apply torque, angular momentum and energy equations, and compare rotation with linear motion.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Rotation is described by angle, angular velocity and angular acceleration
  1. 1Rotation is described by angle, angular velocity and angular acceleration
  2. 2Moment of inertia measures how hard a body is to spin
  3. 3A resultant torque produces angular acceleration
  4. 4Angular momentum is conserved when no external torque acts
  5. 5A spinning body stores rotational kinetic energy
  6. 6Every linear quantity has a rotational partner
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Rotation is described by angle, angular velocity and angular acceleration

A spinning wheel has no single speed, because points at different distances from the centre move at different speeds. Angles solve this problem. Every point turns through the same angle in the same time.

The angle turned, θ\thetaθ, is the angular displacement, measured in radians. Angular velocity, ω\omegaω, is its rate of change: ω=ΔθΔt\omega=\frac{\Delta\theta}{\Delta t}ω=ΔtΔθ​. The rate of change of angular velocity is the angular acceleration, α\alphaα, measured in rad s−2\mathrm{rad\,s^{-2}}rads−2.

For constant angular acceleration, the equations match those for straight-line motion. Here ω1\omega_1ω1​ is the initial and ω2\omega_2ω2​ the final angular velocity.

  • ω2=ω1+αt\omega_2=\omega_1+\alpha tω2​=ω1​+αt
  • θ=ω1+ω22 t\theta=\frac{\omega_1+\omega_2}{2}\,tθ=2ω1​+ω2​​t
  • θ=ω1t+12αt2\theta=\omega_1t+\frac12\alpha t^2θ=ω1​t+21​αt2
  • ω22=ω12+2αθ\omega_2^2=\omega_1^2+2\alpha\thetaω22​=ω12​+2αθ

Key terms · tap one for its definition

angular displacement

Angular displacement is the angle through which a body turns about an axis, measured in radians.

angular velocity

Angular velocity is the rate of change of angular displacement, ω=ΔθΔt\omega=\frac{\Delta\theta}{\Delta t}ω=ΔtΔθ​, measured in rad s−1\mathrm{rad\,s^{-1}}rads−1.

angular acceleration

Angular acceleration is the rate of change of angular velocity.

Part 1 done

2

Part 2 of 6: Moment of inertia measures how hard a body is to spin

A heavy door is harder to swing than a light one. A skater with arms out spins more slowly than with arms in. In both cases the way mass is arranged matters. Mass close to the axis is easy to turn, but the same mass far out is hard to turn.

This resistance to a change in rotation is the moment of inertia, III. For point masses, I=∑mr2I=\sum mr^2I=∑mr2, where rrr is each mass’s distance from the axis. Its unit is kg m2\mathrm{kg\,m^2}kgm2. Mass far from the axis counts for much more, because rrr is squared. It is the rotational equivalent of mass.

Moments of inertia of three bodies about a central axis

Body and axisMoment of inertia
Thin ring, axis perpendicular to its planeMR2MR^2MR2
Solid disc, same axis12MR2\frac12MR^221​MR2
Solid sphere, axis through a diameter25MR2\frac25MR^252​MR2
Body and axis
Thin ring, axis perpendicular to its plane
Moment of inertia
MR2MR^2MR2
Body and axis
Solid disc, same axis
Moment of inertia
12MR2\frac12MR^221​MR2
Body and axis
Solid sphere, axis through a diameter
Moment of inertia
25MR2\frac25MR^252​MR2

Worked example

Moment of inertia of a dumbbell

Two small masses of 0.50 kg0.50\,\mathrm{kg}0.50kg sit at either end of a light rod. Each is 0.40 m0.40\,\mathrm{m}0.40m from the axis through the rod’s centre. Calculate the moment of inertia.
  1. 1
    Moment of inertia = sum of (mass × distance2^22), so I=∑mr2I=\sum mr^2I=∑mr2.
  2. 2
    Substitute: I=(0.50×0.402)+(0.50×0.402)I=(0.50\times0.40^2)+(0.50\times0.40^2)I=(0.50×0.402)+(0.50×0.402).
  3. 3
    Calculate: I=0.080+0.080=0.16 kg m2I=0.080+0.080=0.16\,\mathrm{kg\,m^2}I=0.080+0.080=0.16kgm2.

Answer: The moment of inertia is 0.16 kg m20.16\,\mathrm{kg\,m^2}0.16kgm2.

Key term

moment of inertia

Moment of inertia measures rotational inertia about a specified axis through the distribution of mass.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that plays the role of mass in rotational motion.
Show answer and explanation

Answer: C · Worked explanation

Moment of inertia is the resistance to a change in rotation, just as mass is resistance to a change in linear motion. Torque is the equivalent of force. Angular momentum is the equivalent of momentum, and angular velocity the equivalent of velocity.
3

Part 3 of 6: A resultant torque produces angular acceleration

Pushing a door near its hinge barely moves it, while pushing at the handle works easily. The turning effect depends on both the force and where it acts. Torque, TTT, measures it.

For a force FFF at right angles to a distance rrr from the axis, T=FrT=FrT=Fr. The unit is N m\mathrm{N\,m}Nm. A resultant torque changes rotation just as a resultant force changes linear motion: T=IαT=I\alphaT=Iα. The angular acceleration is α=TI\alpha=\frac{T}{I}α=IT​.

Worked example

Angular acceleration of the dumbbell

The dumbbell has I=0.16 kg m2I=0.16\,\mathrm{kg\,m^2}I=0.16kgm2. A resultant torque of 0.80 N m0.80\,\mathrm{N\,m}0.80Nm acts on it from rest. Calculate its angular acceleration and its angular velocity after 3.0 s3.0\,\mathrm{s}3.0s.
  1. 1
    Angular acceleration = torque divided by moment of inertia: α=TI\alpha=\frac{T}{I}α=IT​.
  2. 2
    Substitute: α=0.800.16=5.0 rad s−2\alpha=\frac{0.80}{0.16}=5.0\,\mathrm{rad\,s^{-2}}α=0.160.80​=5.0rads−2.
  3. 3
    Use ω2=ω1+αt\omega_2=\omega_1+\alpha tω2​=ω1​+αt with ω1=0\omega_1=0ω1​=0: ω2=5.0×3.0=15 rad s−1\omega_2=5.0\times3.0=15\,\mathrm{rad\,s^{-1}}ω2​=5.0×3.0=15rads−1.

Answer: α=5.0 rad s−2\alpha=5.0\,\mathrm{rad\,s^{-2}}α=5.0rads−2 and ω2=15 rad s−1\omega_2=15\,\mathrm{rad\,s^{-1}}ω2​=15rads−1.

Exam tip

Here TTT is torque, not period or temperature. Use the resultant torque and a moment of inertia about the same axis.

Key term

torque

Torque is a force’s turning effect about a chosen axis.

Part 3 done

4

Part 4 of 6: Angular momentum is conserved when no external torque acts

A spinning top keeps turning because rotation carries its own momentum. This is the angular momentum, LLL, of the body. It is found from L=IωL=I\omegaL=Iω.

If no external torque acts, angular momentum stays constant. When III falls, ω\omegaω must rise. A skater who pulls in her arms spins faster for this reason. A diver tucks to spin quickly and straightens to slow down.

Worked example

A skater pulling in her arms

A skater spins at 2.0 rad s−12.0\,\mathrm{rad\,s^{-1}}2.0rads−1 with moment of inertia 4.0 kg m24.0\,\mathrm{kg\,m^2}4.0kgm2. She pulls in her arms, which reduces it to 1.6 kg m21.6\,\mathrm{kg\,m^2}1.6kgm2. Calculate her new angular velocity.
  1. 1
    No external torque acts, so angular momentum is conserved: I1ω1=I2ω2I_1\omega_1=I_2\omega_2I1​ω1​=I2​ω2​.
  2. 2
    Substitute: 4.0×2.0=1.6×ω24.0\times2.0=1.6\times\omega_24.0×2.0=1.6×ω2​.
  3. 3
    Rearrange: ω2=8.01.6=5.0 rad s−1\omega_2=\frac{8.0}{1.6}=5.0\,\mathrm{rad\,s^{-1}}ω2​=1.68.0​=5.0rads−1.

Answer: Her new angular velocity is 5.0 rad s−15.0\,\mathrm{rad\,s^{-1}}5.0rads−1.

Common mistake

Angular momentum is conserved here, but rotational kinetic energy is not. The skater does work pulling her arms inwards, so her rotational kinetic energy rises.

Key term

angular momentum

Angular momentum is the product of a body’s moment of inertia and angular velocity about an axis, measured in kg m2 s−1\mathrm{kg\,m^2\,s^{-1}}kgm2s−1.

Part 4 done

Quick check

One question on the part you just read

Easy

State the unit of moment of inertia.
Show answer and explanation

Answer: A · Worked explanation

Moment of inertia is found from I=∑mr2I=\sum mr^2I=∑mr2, so its unit is the kilogram metre squared, kg m2\mathrm{kg\,m^2}kgm2. The unit N m\mathrm{N\,m}Nm belongs to torque, which is a force multiplied by a distance. The unit kg m2 s−1\mathrm{kg\,m^2\,s^{-1}}kgm2s−1 belongs to angular momentum, and rad s−1\mathrm{rad\,s^{-1}}rads−1 is the unit of angular velocity.
5

Part 5 of 6: A spinning body stores rotational kinetic energy

A flywheel stores energy in its rotation. This is its rotational kinetic energy, EkE_kEk​. Each particle moves at speed v=ωrv=\omega rv=ωr, so adding 12mv2\frac12mv^221​mv2 over all particles gives Ek=12Iω2E_k=\frac12I\omega^2Ek​=21​Iω2.

Doubling the angular velocity quadruples the stored energy. A flywheel with its mass near the rim has a large III. It therefore stores more energy at a given ω\omegaω. A torque also does work and delivers power.

  • W=TθW=T\thetaW=Tθ, the work done by a constant torque turning through θ\thetaθ radians
  • P=TωP=T\omegaP=Tω, the power delivered by the torque

Worked example

Energy stored in a flywheel

A solid disc flywheel has mass 2.0 kg2.0\,\mathrm{kg}2.0kg and radius 0.30 m0.30\,\mathrm{m}0.30m. It turns at 40 rad s−140\,\mathrm{rad\,s^{-1}}40rads−1. Calculate its rotational kinetic energy.
  1. 1
    For a solid disc, I=12MR2=12×2.0×0.302=0.090 kg m2I=\frac12MR^2=\frac12\times2.0\times0.30^2=0.090\,\mathrm{kg\,m^2}I=21​MR2=21​×2.0×0.302=0.090kgm2.
  2. 2
    Rotational kinetic energy = 12\frac1221​ × moment of inertia × (angular velocity)2^22.
  3. 3
    Substitute: Ek=12×0.090×402E_k=\frac12\times0.090\times40^2Ek​=21​×0.090×402.
  4. 4
    Calculate: Ek=72 JE_k=72\,\mathrm{J}Ek​=72J.

Answer: The rotational kinetic energy is 72 J72\,\mathrm{J}72J.

Key term

rotational kinetic energy

Rotational kinetic energy is the energy associated with a body’s rotation about an axis.

Part 5 done

6

Part 6 of 6: Every linear quantity has a rotational partner

You can now match each rotational idea with a linear one. The same patterns appear in both, so equations carry over directly. Angles replace distances, and angular velocity replaces velocity. Mass becomes moment of inertia, and force becomes torque.

Linear and rotational quantities compared

IdeaLinearRotational
Velocityvvvω\omegaω
Accelerationaaaα\alphaα
Resistance to changemass mmmmoment of inertia III
Cause of accelerationF=maF=maF=maT=IαT=I\alphaT=Iα
Momentump=mvp=mvp=mvL=IωL=I\omegaL=Iω
Kinetic energy12mv2\frac12mv^221​mv212Iω2\frac12I\omega^221​Iω2
Idea
Velocity
Linear
vvv
Rotational
ω\omegaω
Idea
Acceleration
Linear
aaa
Rotational
α\alphaα
Idea
Resistance to change
Linear
mass mmm
Rotational
moment of inertia III
Idea
Cause of acceleration
Linear
F=maF=maF=ma
Rotational
T=IαT=I\alphaT=Iα
Idea
Momentum
Linear
p=mvp=mvp=mv
Rotational
L=IωL=I\omegaL=Iω
Idea
Kinetic energy
Linear
12mv2\frac12mv^221​mv2
Rotational
12Iω2\frac12I\omega^221​Iω2

The two sets are linked through the radius. A point at distance rrr from the axis has speed v=ωrv=\omega rv=ωr. Its tangential acceleration is a=αra=\alpha ra=αr. These links let you move between linear and angular results.

Exam tip

In a comparison answer, name both the linear quantity and its rotational partner.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what is meant by the moment of inertia of a body.

    Show mark schemeHide mark scheme

    Model answer

    It measures how hard the body is to turn about a stated axis. It depends on how the mass is distributed, so mass further from the axis gives a larger moment of inertia, as in I=∑mr2I=\sum mr^2I=∑mr2.

    • 1 mark for stating that it measures resistance to a change in rotation about a particular axis
    • 1 mark for stating that it depends on the distribution of mass, with mass further from the axis giving a larger value (I=∑mr2I=\sum mr^2I=∑mr2)
  2. 2.Calculate[3 marks]

    Calculate the angular velocity after 2.0 s2.0\,\mathrm{s}2.0s of a flywheel of moment of inertia 0.30 kg m20.30\,\mathrm{kg\,m^2}0.30kgm2 that starts from rest and has a resultant torque of 4.5 N m4.5\,\mathrm{N\,m}4.5Nm acting on it.

    Show mark schemeHide mark scheme

    Model answer

    α=TI=4.50.30=15 rad s−2\alpha=\frac{T}{I}=\frac{4.5}{0.30}=15\,\mathrm{rad\,s^{-2}}α=IT​=0.304.5​=15rads−2. Then ω2=ω1+αt=0+15×2.0=30 rad s−1\omega_2=\omega_1+\alpha t=0+15\times2.0=30\,\mathrm{rad\,s^{-1}}ω2​=ω1​+αt=0+15×2.0=30rads−1.

    • 1 mark for using α=TI\alpha=\frac{T}{I}α=IT​
    • 1 mark for obtaining α=15 rad s−2\alpha=15\,\mathrm{rad\,s^{-2}}α=15rads−2
    • 1 mark for using ω2=ω1+αt\omega_2=\omega_1+\alpha tω2​=ω1​+αt to obtain 30 rad s−130\,\mathrm{rad\,s^{-1}}30rads−1
  3. 3.Explain[3 marks]

    Explain why a skater spins faster when she pulls in her arms.

    Show mark schemeHide mark scheme

    Model answer

    No external torque acts, so her angular momentum IωI\omegaIω is constant. Pulling in her arms moves mass closer to the axis, so III decreases. Since IωI\omegaIω is constant, ω\omegaω increases.

    • 1 mark for stating that no external torque acts so angular momentum is conserved
    • 1 mark for stating that pulling in the arms decreases the moment of inertia
    • 1 mark for concluding that the angular velocity must increase because IωI\omegaIω is constant
  4. 4.Calculate[2 marks]

    Calculate the rotational kinetic energy of a flywheel that has moment of inertia 0.50 kg m20.50\,\mathrm{kg\,m^2}0.50kgm2 and turns at 20 rad s−120\,\mathrm{rad\,s^{-1}}20rads−1.

    Show mark schemeHide mark scheme

    Model answer

    Ek=12Iω2=12×0.50×202=1.0×102 JE_k=\frac12I\omega^2=\frac12\times0.50\times20^2=1.0\times10^{2}\,\mathrm{J}Ek​=21​Iω2=21​×0.50×202=1.0×102J.

    • 1 mark for substituting into Ek=12Iω2E_k=\frac12I\omega^2Ek​=21​Iω2
    • 1 mark for obtaining 1.0×102 J1.0\times10^{2}\,\mathrm{J}1.0×102J (100 J)
  5. 5.Compare[3 marks]

    Compare linear and rotational motion by giving the rotational equivalent of each of mass, force and momentum.

    Show mark schemeHide mark scheme

    Model answer

    The rotational equivalent of mass is moment of inertia. The equivalent of force is torque. The equivalent of momentum is angular momentum.

    • 1 mark for moment of inertia as the equivalent of mass
    • 1 mark for torque as the equivalent of force
    • 1 mark for angular momentum as the equivalent of momentum
  6. 6.Suggest[2 marks]

    Suggest why a flywheel designed to store energy has most of its mass near the rim.

    Show mark schemeHide mark scheme

    Model answer

    Mass near the rim gives a larger moment of inertia. Since Ek=12Iω2E_k=\frac12I\omega^2Ek​=21​Iω2, it stores more energy at the same angular velocity.

    • 1 mark for stating that mass near the rim gives a larger moment of inertia
    • 1 mark for linking the larger III to greater stored energy at the same angular velocity (Ek=12Iω2E_k=\frac12I\omega^2Ek​=21​Iω2)

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the equation for the angular momentum of a spinning body.
Show answer and explanation

Answer: D · Worked explanation

Angular momentum is the product of moment of inertia and angular velocity, L=IωL=I\omegaL=Iω, so its unit is kg m2 s−1\mathrm{kg\,m^2\,s^{-1}}kgm2s−1. The expression 12Iω2\frac12I\omega^221​Iω2 is the rotational kinetic energy, which is an energy and not a momentum. The product IαI\alphaIα equals the resultant torque, and TθT\thetaTθ is the work done by a torque.
4.

Medium·Calculate[1 mark]

Two small masses of 0.30 kg0.30\,\mathrm{kg}0.30kg are fixed on opposite sides of an axis, each 0.50 m0.50\,\mathrm{m}0.50m from it, on a light rod. Calculate the moment of inertia about the axis.
Show answer and explanation

Answer: B · Worked explanation

Each mass contributes mr2mr^2mr2, so I=∑mr2=2×0.30×0.502=0.15 kg m2I=\sum mr^2=2\times0.30\times0.50^2=0.15\,\mathrm{kg\,m^2}I=∑mr2=2×0.30×0.502=0.15kgm2. The value 0.075 kg m20.075\,\mathrm{kg\,m^2}0.075kgm2 counts only one of the two masses. The value 0.30 kg m20.30\,\mathrm{kg\,m^2}0.30kgm2 forgets to square rrr, and 0.60 kg m20.60\,\mathrm{kg\,m^2}0.60kgm2 uses the separation of the masses, 1.0 m1.0\,\mathrm{m}1.0m, as rrr. Always use the distance from each mass to the axis.
5.

Medium·Calculate[1 mark]

A constant resultant torque of 12 N m12\,\mathrm{N\,m}12Nm acts on a disc with moment of inertia 0.40 kg m20.40\,\mathrm{kg\,m^2}0.40kgm2. Calculate its angular acceleration.
Show answer and explanation

Answer: C · Worked explanation

Rearranging T=IαT=I\alphaT=Iα gives α=TI=120.40=30 rad s−2\alpha=\frac{T}{I}=\frac{12}{0.40}=30\,\mathrm{rad\,s^{-2}}α=IT​=0.4012​=30rads−2. The value 4.8 comes from multiplying torque by moment of inertia instead of dividing. The value 0.033 comes from dividing the other way round, as IT\frac{I}{T}TI​. The value 12 simply repeats the torque. Check that the answer has the unit rad s−2\mathrm{rad\,s^{-2}}rads−2.
6.

Medium·Calculate[1 mark]

A skater spins at 2.0 rad s−12.0\,\mathrm{rad\,s^{-1}}2.0rads−1 with moment of inertia 4.0 kg m24.0\,\mathrm{kg\,m^2}4.0kgm2. Her moment of inertia falls to 1.6 kg m21.6\,\mathrm{kg\,m^2}1.6kgm2 with no external torque. Calculate her new angular velocity.
Show answer and explanation

Answer: D · Worked explanation

No external torque acts, so angular momentum is conserved and ω2=I1ω1I2=4.0×2.01.6=5.0 rad s−1\omega_2=\frac{I_1\omega_1}{I_2}=\frac{4.0\times2.0}{1.6}=5.0\,\mathrm{rad\,s^{-1}}ω2​=I2​I1​ω1​​=1.64.0×2.0​=5.0rads−1. The value 0.80 comes from inverting the ratio of the moments of inertia. The value 2.0 ignores the change in III, and 12.5 squares the ratio. Her angular velocity rises because her moment of inertia falls, so an increase is expected.
7.

Medium·Calculate[1 mark]

A flywheel has moment of inertia 0.20 kg m20.20\,\mathrm{kg\,m^2}0.20kgm2 and turns at 30 rad s−130\,\mathrm{rad\,s^{-1}}30rads−1. Calculate its rotational kinetic energy.
Show answer and explanation

Answer: B · Worked explanation

Substituting gives Ek=12Iω2=12×0.20×302=90 JE_k=\frac12I\omega^2=\frac12\times0.20\times30^2=90\,\mathrm{J}Ek​=21​Iω2=21​×0.20×302=90J. The value 180 J180\,\mathrm{J}180J leaves out the factor of 12\frac1221​. The value 3.0 J3.0\,\mathrm{J}3.0J forgets to square ω\omegaω, and 6.0 is IωI\omegaIω, which is the angular momentum rather than an energy. Energy must always be given in joules, so check the unit of the answer.
8.

Hard·Predict[2 marks]

The moment of inertia of a spinning flywheel is halved and its angular velocity doubles. Predict how its rotational kinetic energy changes.
Show answer and explanation

Answer: A · Worked explanation

Rotational kinetic energy is 12Iω2\frac12I\omega^221​Iω2, so the new value is 12×I2×(2ω)2=2×12Iω2\frac12\times\frac{I}{2}\times(2\omega)^2=2\times\frac12I\omega^221​×2I​×(2ω)2=2×21​Iω2. Angular momentum IωI\omegaIω does stay the same, which tempts the answer that energy is unchanged. Energy depends on ω2\omega^2ω2, so it doubles. A quadrupling would ignore the halving of III.
9.

Hard·Explain[2 marks]

A skater pulls in her arms and spins faster. Which statement correctly accounts for her rotational kinetic energy?
Show answer and explanation

Answer: C · Worked explanation

Angular momentum L=IωL=I\omegaL=Iω stays constant, so ω\omegaω rises by the same factor that III falls. Since Ek=12Iω2=12LωE_k=\frac12I\omega^2=\frac12L\omegaEk​=21​Iω2=21​Lω, the rotational kinetic energy rises in proportion to ω\omegaω. The extra energy comes from the work she does moving her arms inwards. Conservation of angular momentum does not mean that rotational energy is constant.
10.

Hard·Determine[2 marks]

A solid disc of mass 4.0 kg4.0\,\mathrm{kg}4.0kg and radius 0.20 m0.20\,\mathrm{m}0.20m has I=12MR2I=\frac12MR^2I=21​MR2. A constant torque of 0.80 N m0.80\,\mathrm{N\,m}0.80Nm acts on it for 5.0 s5.0\,\mathrm{s}5.0s from rest. Determine its final angular velocity.
Show answer and explanation

Answer: D · Worked explanation

Start with I=12×4.0×0.202=0.080 kg m2I=\frac12\times4.0\times0.20^2=0.080\,\mathrm{kg\,m^2}I=21​×4.0×0.202=0.080kgm2. Then α=TI=0.800.080=10 rad s−2\alpha=\frac{T}{I}=\frac{0.80}{0.080}=10\,\mathrm{rad\,s^{-2}}α=IT​=0.0800.80​=10rads−2, and ω2=αt=10×5.0=50 rad s−1\omega_2=\alpha t=10\times5.0=50\,\mathrm{rad\,s^{-1}}ω2​=αt=10×5.0=50rads−1 from rest. The value 25 comes from using I=MR2I=MR^2I=MR2 for the disc. The value 0.50 comes from inverting TI\frac{T}{I}IT​ when finding α\alphaα. Using the correct moment of inertia for a solid disc is the key step.

Keep going

Next topic3.11.2 Thermodynamics and enginesPrevious topic3.10.6 Radionuclide imaging and therapy

More in Section 3.11 · Option: Engineering physics

  1. 3.11.1Rotational dynamicsNotes · 10 questions
  2. 3.11.2Thermodynamics and enginesNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Rotation is described by angle, angular velocity and angular acceleration
  2. 2Moment of inertia measures how hard a body is to spin
  3. 3A resultant torque produces angular acceleration
  4. 4Angular momentum is conserved when no external torque acts
  5. 5A spinning body stores rotational kinetic energy
  6. 6Every linear quantity has a rotational partner
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe