Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.12 Option: Turning points in physics
  4. ›3.12.1 Discovery of the electron

AQA A-level Physics · Section 3.12 · Option: Turning points in physics

3.12.1 Discovery of the electron

Describe how the electron was discovered, calculate its specific charge from experimental data, and explain why it is fundamental.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Cathode rays were shown to be streams of negative particles
  1. 1Cathode rays were shown to be streams of negative particles
  2. 2Heated metal releases electrons that a voltage accelerates
  3. 3Crossed fields allow the speed of electrons to be measured
  4. 4Experimental data give the specific charge of the electron
  5. 5Millikan’s oil drops showed that charge is quantised
  6. 6Specific charge and quantised charge show the electron is fundamental
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Cathode rays were shown to be streams of negative particles

In a sealed glass tube at low pressure, a high voltage between two electrodes makes the tube glow. Something travels from the negative electrode, the cathode, to the other end. These beams were called cathode rays. Experiments revealed their nature.

  • They travel in straight lines and cast sharp shadows of objects in their path.
  • An electric field bends them towards the positive plate, so they carry negative charge.
  • A magnetic field also bends them, as it does any moving charge.
  • They can turn a light paddle wheel, so they carry momentum and have mass.

In 1897 Thomson concluded that cathode rays are streams of tiny negative particles. These particles were later named electrons.

Key term

cathode ray

A cathode ray is a beam of electrons emitted from the negative electrode of an evacuated tube.

Part 1 done

2

Part 2 of 6: Heated metal releases electrons that a voltage accelerates

Early tubes needed gas to carry the current. A cleaner source is a heated metal filament in a vacuum. Thermionic emission releases electrons from its surface. An electric field between the filament and an anode then accelerates them.

An electron of charge eee crossing a potential difference VVV gains kinetic energy eVeVeV. So 12mv2=eV\frac12mv^2=eV21​mv2=eV, where mmm is the electron’s mass. Rearranging gives em=v22V\frac{e}{m}=\frac{v^2}{2V}me​=2Vv2​.

The ratio em\frac{e}{m}me​ is the specific charge of the electron. Measuring the speed vvv and the potential difference VVV therefore gives the specific charge.

Key terms · tap one for its definition

thermionic emission

Thermionic emission is the release of electrons from the surface of a heated metal.

specific charge

The specific charge of a particle is its charge divided by its mass, measured in C kg−1\mathrm{C\,kg^{-1}}Ckg−1.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the observation that showed cathode rays carry negative charge.
Show answer and explanation

Answer: A · Worked explanation

Only a deflection towards the positive plate shows the sign of the charge, because opposite charges attract. Straight-line travel and shadows show that the rays move in straight lines but not what charge they carry. The glow shows that the rays arrive at the glass.
3

Part 3 of 6: Crossed fields allow the speed of electrons to be measured

The equation above needs a measured speed. Thomson sent the beam between two parallel plates, with a magnetic field at right angles to the electric field. The electric field EEE pushes electrons one way with force eEeEeE. The magnetic field BBB pushes them the other way with force BevBevBev.

Figure 1. Electrons are accelerated, then pass between charged plates in a magnetic field at right angles. The two forces on the beam act in opposite directions.

He adjusted the fields until the beam was not deflected. The two forces were then equal, so eE=BeveE=BeveE=Bev. This gives v=EBv=\frac{E}{B}v=BE​. For plates a distance ddd apart with potential difference VpV_\mathrm{p}Vp​, the field is E=VpdE=\frac{V_\mathrm{p}}{d}E=dVp​​.

Part 3 done

4

Part 4 of 6: Experimental data give the specific charge of the electron

Now combine the two steps. The crossed fields give the speed, and the accelerating voltage then gives the specific charge. A worked example shows the method.

Worked example

Specific charge from crossed fields

Electrons are accelerated through 71.0 V71.0\,\mathrm{V}71.0V. They pass undeflected between plates 2.00 cm2.00\,\mathrm{cm}2.00cm apart with a potential difference of 100 V100\,\mathrm{V}100V, in a magnetic field of 1.00×10−3 T1.00\times10^{-3}\,\mathrm{T}1.00×10−3T. Calculate the specific charge of the electron.
  1. 1
    Electric field: E=Vpd=1000.0200=5.00×103 V m−1E=\frac{V_\mathrm{p}}{d}=\frac{100}{0.0200}=5.00\times10^{3}\,\mathrm{V\,m^{-1}}E=dVp​​=0.0200100​=5.00×103Vm−1.
  2. 2
    Speed: v=EB=5.00×1031.00×10−3=5.00×106 m s−1v=\frac{E}{B}=\frac{5.00\times10^{3}}{1.00\times10^{-3}}=5.00\times10^{6}\,\mathrm{m\,s^{-1}}v=BE​=1.00×10−35.00×103​=5.00×106ms−1.
  3. 3
    Specific charge = (speed)2^22 divided by twice the potential difference, so em=v22V=(5.00×106)22×71.0\frac{e}{m}=\frac{v^2}{2V}=\frac{(5.00\times10^{6})^2}{2\times71.0}me​=2Vv2​=2×71.0(5.00×106)2​.
  4. 4
    Calculate: em=1.76×1011 C kg−1\frac{e}{m}=1.76\times10^{11}\,\mathrm{C\,kg^{-1}}me​=1.76×1011Ckg−1.

Answer: The specific charge is 1.76×1011 C kg−11.76\times10^{11}\,\mathrm{C\,kg^{-1}}1.76×1011Ckg−1.

A second method uses a magnetic field alone. The beam bends in a circle of radius rrr, and Bev=mv2rBev=\frac{mv^2}{r}Bev=rmv2​ gives em=vBr\frac{e}{m}=\frac{v}{Br}me​=Brv​. Both methods give the same value. The accepted value of the specific charge is 1.76×1011 C kg−11.76\times10^{11}\,\mathrm{C\,kg^{-1}}1.76×1011Ckg−1. Repeating the experiment with different cathode materials and gases gave the same result. Such consistency makes the measurement reliable.

Go deeperSpecific charge from a fine beam tube

In a fine beam tube, electrons accelerated through VVV travel in a circle of radius rrr in a field BBB. Combining 12mv2=eV\frac12mv^2=eV21​mv2=eV with Bev=mv2rBev=\frac{mv^2}{r}Bev=rmv2​ removes vvv.

Substituting v=Bermv=\frac{Ber}{m}v=mBer​ into the energy equation gives em=2VB2r2\frac{e}{m}=\frac{2V}{B^2r^2}me​=B2r22V​. Measuring VVV, BBB and rrr is therefore enough.

Part 4 done

Quick check

One question on the part you just read

Easy

State what thermionic emission is.
Show answer and explanation

Answer: C · Worked explanation

Heating a metal gives some of its electrons enough energy to leave the surface, which is thermionic emission. Cooling does not release electrons. The particles released are electrons, not positive ions, and ionising gas atoms is the process in an early discharge tube.
5

Part 5 of 6: Millikan’s oil drops showed that charge is quantised

Specific charge alone cannot give the electron’s mass. Millikan found its charge by suspending tiny charged oil drops between two horizontal plates. A potential difference VVV across plates a distance ddd apart gives a field E=VdE=\frac{V}{d}E=dV​. He adjusted VVV until a drop hung still.

The upward electric force then equalled the drop’s weight, so QE=weightQE=\mathrm{weight}QE=weight. Every charge he measured was a whole-number multiple of 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C. This is the quantisation of charge.

Worked example

Charge on an oil drop

A drop of weight 1.92×10−14 N1.92\times10^{-14}\,\mathrm{N}1.92×10−14N is held still between plates 1.00 cm1.00\,\mathrm{cm}1.00cm apart. The potential difference is 400 V400\,\mathrm{V}400V. Calculate the charge on the drop and how many elementary charges it carries.
  1. 1
    Electric field: E=Vd=4000.0100=4.00×104 V m−1E=\frac{V}{d}=\frac{400}{0.0100}=4.00\times10^{4}\,\mathrm{V\,m^{-1}}E=dV​=0.0100400​=4.00×104Vm−1.
  2. 2
    The forces balance, so Q=weightE=1.92×10−144.00×104=4.80×10−19 CQ=\frac{\mathrm{weight}}{E}=\frac{1.92\times10^{-14}}{4.00\times10^{4}}=4.80\times10^{-19}\,\mathrm{C}Q=Eweight​=4.00×1041.92×10−14​=4.80×10−19C.
  3. 3
    Divide by eee: 4.80×10−191.60×10−19=3\frac{4.80\times10^{-19}}{1.60\times10^{-19}}=31.60×10−194.80×10−19​=3.

Answer: The drop carries 4.80×10−19 C4.80\times10^{-19}\,\mathrm{C}4.80×10−19C, which is 3 elementary charges.

Common mistake

Convert the plate separation to metres first. Using 1.00 for the separation gives a charge 100 times too large.

Key term

quantisation of charge

Quantisation of charge is the fact that any observed charge is a whole-number multiple of the elementary charge, e=1.60×10−19 Ce=1.60\times10^{-19}\,\mathrm{C}e=1.60×10−19C.

Part 5 done

6

Part 6 of 6: Specific charge and quantised charge show the electron is fundamental

Now join the two results. The electron’s charge is 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C in magnitude, and its specific charge is 1.76×1011 C kg−11.76\times10^{11}\,\mathrm{C\,kg^{-1}}1.76×1011Ckg−1. Dividing gives a mass of 9.1×10−31 kg9.1\times10^{-31}\,\mathrm{kg}9.1×10−31kg. A hydrogen ion has a specific charge of only 9.58×107 C kg−19.58\times10^{7}\,\mathrm{C\,kg^{-1}}9.58×107Ckg−1, so the electron’s mass is about 1840 times smaller.

Three results point to a fundamental particle.

  • The specific charge is the same for every cathode material and every gas used.
  • The electron is far lighter than any atom or ion.
  • Charge comes in whole-number multiples of eee, so the electron carries the smallest unit.

Electrons are therefore a common part of all atoms. Nothing has shown them to be made of smaller parts.

Exam tip

State the evidence first, then say what it shows. The same specific charge for every material shows that electrons are common to all matter.

Key term

fundamental particle

A fundamental particle is a particle with no known internal structure that is not made of smaller particles.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe three observations that showed what cathode rays are.

    Show mark schemeHide mark scheme

    Model answer

    Cathode rays travel in straight lines and cast shadows. They are deflected towards the positive plate in an electric field, so they are negatively charged. They turn a light paddle wheel, so they carry momentum and have mass.

    • 1 mark for stating that they travel in straight lines and cast shadows
    • 1 mark for stating that deflection towards the positive plate shows negative charge
    • 1 mark for stating that they turn a paddle wheel, so they have mass and momentum, or that a magnetic field deflects them
  2. 2.Explain[3 marks]

    Explain how crossed electric and magnetic fields were used to find the speed of electrons in a beam.

    Show mark schemeHide mark scheme

    Model answer

    The fields were set at right angles so their forces on the electrons opposed each other. They were adjusted until the beam was not deflected. The forces were then equal, eE=BeveE=BeveE=Bev, so v=EBv=\frac{E}{B}v=BE​.

    • 1 mark for stating that the electric and magnetic fields act at right angles with opposing forces
    • 1 mark for stating that the fields were adjusted until the beam was undeflected
    • 1 mark for equating the forces (eE=BeveE=BeveE=Bev) to obtain v=EBv=\frac{E}{B}v=BE​
  3. 3.Calculate[3 marks]

    Calculate the specific charge of the electron, given that electrons accelerated through 250 V250\,\mathrm{V}250V reach a speed of 9.38×106 m s−19.38\times10^{6}\,\mathrm{m\,s^{-1}}9.38×106ms−1.

    Show mark schemeHide mark scheme

    Model answer

    12mv2=eV\frac12mv^2=eV21​mv2=eV, so em=v22V=(9.38×106)22×250=1.76×1011 C kg−1\frac{e}{m}=\frac{v^2}{2V}=\frac{(9.38\times10^{6})^2}{2\times250}=1.76\times10^{11}\,\mathrm{C\,kg^{-1}}me​=2Vv2​=2×250(9.38×106)2​=1.76×1011Ckg−1.

    • 1 mark for using em=v22V\frac{e}{m}=\frac{v^2}{2V}me​=2Vv2​
    • 1 mark for substituting the given values correctly
    • 1 mark for obtaining 1.76×1011 C kg−11.76\times10^{11}\,\mathrm{C\,kg^{-1}}1.76×1011Ckg−1
  4. 4.Explain[3 marks]

    Explain how Millikan’s experiment showed that charge is quantised.

    Show mark schemeHide mark scheme

    Model answer

    Charged oil drops were held still between plates, so the electric force equalled the weight, giving Q=weightEQ=\frac{\mathrm{weight}}{E}Q=Eweight​ with E=VdE=\frac{V}{d}E=dV​. The charges found were always whole-number multiples of 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C. No fractions of this value were found, so charge comes in units of eee.

    • 1 mark for stating that drops were held still so the electric force equalled the weight
    • 1 mark for stating that the charges were whole-number multiples of 1.60×10−19 C1.60\times10^{-19}\,\mathrm{C}1.60×10−19C
    • 1 mark for concluding that no smaller unit was found, so charge is quantised
  5. 5.Suggest[2 marks]

    Suggest what it shows about electrons that the measured specific charge was the same for every cathode material.

    Show mark schemeHide mark scheme

    Model answer

    The particles are the same whatever the material. Electrons are therefore a common constituent of all atoms.

    • 1 mark for stating that the particles are identical whichever material is used
    • 1 mark for concluding that electrons are a common part of all atoms
  6. 6.State[1 mark]

    State what is meant by thermionic emission.

    Show mark schemeHide mark scheme

    Model answer

    Thermionic emission is the release of electrons from the surface of a heated metal.

    • 1 mark for stating that it is the release of electrons from a heated metal surface

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the unit of specific charge.
Show answer and explanation

Answer: B · Worked explanation

Specific charge is charge divided by mass, so its unit is C kg−1\mathrm{C\,kg^{-1}}Ckg−1. The unit kg C−1\mathrm{kg\,C^{-1}}kgC−1 is mass divided by charge, the wrong way round. The coulomb alone is the unit of charge, and V m−1\mathrm{V\,m^{-1}}Vm−1 is the unit of electric field strength.
4.

Medium·Calculate[1 mark]

An electron beam is undeflected in an electric field of 4.0×103 V m−14.0\times10^{3}\,\mathrm{V\,m^{-1}}4.0×103Vm−1 and a magnetic field of 2.0×10−3 T2.0\times10^{-3}\,\mathrm{T}2.0×10−3T at right angles to it. Calculate the speed of the electrons.
Show answer and explanation

Answer: D · Worked explanation

The beam is undeflected, so the electric and magnetic forces balance and v=EB=4.0×1032.0×10−3=2.0×106 m s−1v=\frac{E}{B}=\frac{4.0\times10^{3}}{2.0\times10^{-3}}=2.0\times10^{6}\,\mathrm{m\,s^{-1}}v=BE​=2.0×10−34.0×103​=2.0×106ms−1. The value 8.0 multiplies the two fields together. The value 5.0×10−75.0\times10^{-7}5.0×10−7 divides the magnetic field by the electric field, which is the wrong way round. The value 4.0×1034.0\times10^{3}4.0×103 is just the field strength.
5.

Medium·Calculate[1 mark]

Electrons are accelerated from rest through 150 V150\,\mathrm{V}150V. Use em=1.76×1011 C kg−1\frac{e}{m}=1.76\times10^{11}\,\mathrm{C\,kg^{-1}}me​=1.76×1011Ckg−1 to calculate their speed.
Show answer and explanation

Answer: A · Worked explanation

The energy gained is eVeVeV, so 12mv2=eV\frac12mv^2=eV21​mv2=eV and v=2emV=2×1.76×1011×150=7.27×106 m s−1v=\sqrt{2\frac{e}{m}V}=\sqrt{2\times1.76\times10^{11}\times150}=7.27\times10^{6}\,\mathrm{m\,s^{-1}}v=2me​V​=2×1.76×1011×150​=7.27×106ms−1. The value 5.14×1065.14\times10^{6}5.14×106 leaves out the factor of 2 inside the root. The values 5.28×10135.28\times10^{13}5.28×1013 and 2.64×10132.64\times10^{13}2.64×1013 forget to take the square root. Check that the speed is a sensible fraction of the speed of light.
6.

Medium·Calculate[1 mark]

An oil drop of weight 2.88×10−14 N2.88\times10^{-14}\,\mathrm{N}2.88×10−14N is held still between plates 1.0 cm1.0\,\mathrm{cm}1.0cm apart with a potential difference of 600 V600\,\mathrm{V}600V. Calculate its charge.
Show answer and explanation

Answer: C · Worked explanation

The field is E=6000.010=6.0×104 V m−1E=\frac{600}{0.010}=6.0\times10^{4}\,\mathrm{V\,m^{-1}}E=0.010600​=6.0×104Vm−1. The forces balance, so Q=2.88×10−146.0×104=4.8×10−19 CQ=\frac{2.88\times10^{-14}}{6.0\times10^{4}}=4.8\times10^{-19}\,\mathrm{C}Q=6.0×1042.88×10−14​=4.8×10−19C. The value 4.8×10−17 C4.8\times10^{-17}\,\mathrm{C}4.8×10−17C uses 1.0 instead of 0.010 m0.010\,\mathrm{m}0.010m for the plate separation. The value 1.7×10−9 C1.7\times10^{-9}\,\mathrm{C}1.7×10−9C multiplies the weight by the field instead of dividing. Always convert centimetres to metres before finding the field.
7.

Medium·Compare[1 mark]

Assume an electron and a hydrogen ion carry charges of equal magnitude. Their specific charges are 1.76×1011 C kg−11.76\times10^{11}\,\mathrm{C\,kg^{-1}}1.76×1011Ckg−1 and 9.58×107 C kg−19.58\times10^{7}\,\mathrm{C\,kg^{-1}}9.58×107Ckg−1. Compare their masses.
Show answer and explanation

Answer: B · Worked explanation

With equal charges, the mass ratio is the inverse of the specific charge ratio. 1.76×10119.58×107≈1840\frac{1.76\times10^{11}}{9.58\times10^{7}}\approx18409.58×1071.76×1011​≈1840, so the electron’s mass is about 1840 times smaller. A larger specific charge means a smaller mass, so the electron cannot be heavier. The value 18 mishandles the powers of ten.
8.

Hard·Predict[2 marks]

A beam is undeflected between crossed electric and magnetic fields. The accelerating potential difference is then doubled, with both fields unchanged. Predict what happens to the beam.
Show answer and explanation

Answer: C · Worked explanation

The electrons now move faster, by a factor of 2\sqrt{2}2​. The electric force eEeEeE is unchanged but the magnetic force BevBevBev grows, so the beam bends in the direction of the magnetic force. The relation v=EBv=\frac{E}{B}v=BE​ only holds when the beam is undeflected, which is no longer true. The electric force does not depend on speed.
9.

Hard·Suggest[2 marks]

A student measures the charges on four oil drops: 3.20, 4.80, 8.00 and 6.40, all in units of 10−19 C10^{-19}\,\mathrm{C}10−19C. Suggest what these data show.
Show answer and explanation

Answer: D · Worked explanation

Dividing by 1.60 gives 2, 3, 5 and 4, all whole numbers, which is what quantised charge predicts. The mean of 5.60 has no meaning here, because a mean of multiples is not the unit. Different values do not show continuous charge, since they are different multiples of one unit.
10.

Hard·Explain[2 marks]

The same specific charge is found for cathode rays whichever metal or gas is used. What does this suggest?
Show answer and explanation

Answer: A · Worked explanation

If the particles differed with the material, the specific charge would change. A constant value suggests identical particles that are present in every kind of matter. Atoms of gas would give different values for different gases. Electrons that came only from one metal, or that had different masses, would also give different specific charges.

Keep going

Next topic3.12.2 Wave-particle duality (option)Previous topic3.11.2 Thermodynamics and engines

More in Section 3.12 · Option: Turning points in physics

  1. 3.12.1Discovery of the electronNotes · 10 questions
  2. 3.12.2Wave-particle duality (option)Notes · 10 questions
  3. 3.12.3Special relativityNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Cathode rays were shown to be streams of negative particles
  2. 2Heated metal releases electrons that a voltage accelerates
  3. 3Crossed fields allow the speed of electrons to be measured
  4. 4Experimental data give the specific charge of the electron
  5. 5Millikan’s oil drops showed that charge is quantised
  6. 6Specific charge and quantised charge show the electron is fundamental
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe