Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.3 Waves
  4. ›3.3.1.3 Superposition and stationary waves

AQA A-level Physics · Section 3.3 · Waves

3.3.1.3 Superposition and stationary waves

Explain the principle of superposition, describe how stationary waves form on a string, identify nodes and antinodes, and compare stationary with progressive waves.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Overlapping waves combine by adding their displacements
  1. 1Overlapping waves combine by adding their displacements
  2. 2Two waves travelling in opposite directions make a stationary wave
  3. 3Nodes and antinodes are fixed positions along the wave
  4. 4A fixed string allows only certain stationary wave patterns
  5. 5String length, tension and mass control the fundamental frequency
  6. 6Stationary waves transfer no net energy, unlike progressive waves
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Overlapping waves combine by adding their displacements

Drop two stones into a still pond and the ripples cross. Each ripple carries on unchanged after the crossing. Where they overlap, the water surface shows a combined shape.

The principle of superposition describes that combined shape. At each point, add the displacements of the separate waves, keeping their signs. Displacement is the distance from the rest position, in a stated direction. A crest has positive displacement and a trough has negative displacement.

Common mistake

Waves do not collide and rebound. They pass through each other, and each emerges unchanged.

Key term

principle of superposition

The resultant displacement where waves overlap equals the sum of their individual displacements.

Part 1 done

2

Part 2 of 6: Two waves travelling in opposite directions make a stationary wave

Now tie a rope to a wall and shake the free end steadily. Each wave runs along the rope and reflects at the wall. The reflected wave travels back and meets the incoming wave.

The two waves have the same frequency, which is the number of oscillations each second. Their amplitudes, the maximum displacements, are almost equal. They superpose all along the rope. The result is a stationary wave, also called a standing wave. Its pattern stays in place instead of travelling.

A guitar string works the same way. Both ends are fixed, so waves reflect at each end and keep overlapping.

Key term

stationary wave

A stationary wave is the pattern formed when two waves of the same frequency travel in opposite directions and superpose.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify what is true at a node on a stationary wave.
Show answer and explanation

Answer: C · Worked explanation

At a node the two waves always arrive in antiphase, so their displacements cancel and the medium does not oscillate. Maximum amplitude describes an antinode, where the waves always arrive in phase. Confusing the two types of point is the most common slip.
3

Part 3 of 6: Nodes and antinodes are fixed positions along the wave

Look closely at the rope and some points never move. At others, the rope swings through the greatest distance. These points stay in the same places.

A node is a point where the two waves always arrive in antiphase, so their displacements cancel. An antinode is a point where they always arrive in phase, so their displacements add. Waves arrive in phase when their crests coincide. They arrive in antiphase when a crest meets a trough.

Figure 1. The solid and dashed lines show the string at two moments half a period apart. Nodes never move.

Between two adjacent nodes the string forms one loop. A node lies at each fixed end of a string.

Common mistake

Neighbouring nodes are half a wavelength apart, not a whole wavelength. One loop is half a wavelength long.

Key terms · tap one for its definition

node

A node is a position in a standing wave where the medium has zero oscillation.

antinode

An antinode is a position in a standing wave where the medium oscillates with maximum amplitude.

Part 3 done

4

Part 4 of 6: A fixed string allows only certain stationary wave patterns

A guitar string is fixed at both ends, so each end must be a node. Only some patterns fit between the ends. The simplest has one loop, with a node at each end and an antinode between them.

This pattern has the lowest possible frequency, the fundamental frequency, written f1f_1f1​. For one loop, the string length LLL equals half a wavelength. So λ=2L\lambda=2Lλ=2L and f1=v2Lf_1=\frac{v}{2L}f1​=2Lv​, where vvv is the speed of waves on the string.

Patterns with more loops also fit. Each extra pattern is a harmonic, with frequency 2f12f_12f1​, 3f13f_13f1​ and so on. The second harmonic has two loops and the third has three.

Key terms · tap one for its definition

fundamental frequency

The fundamental frequency f1f_1f1​ is the lowest frequency, in hertz, at which a stationary wave forms on a string fixed at both ends.

harmonic

A harmonic is a stationary wave mode whose frequency is a whole-number multiple of the fundamental frequency.

Part 4 done

Quick check

One question on the part you just read

Easy

State the principle of superposition.
Show answer and explanation

Answer: B · Worked explanation

Where waves overlap, the resultant displacement is found by adding the individual displacements, with their signs. The idea that the larger wave simply wins is wrong, because a small wave still adds or subtracts. After overlapping, each wave carries on unchanged.
5

Part 5 of 6: String length, tension and mass control the fundamental frequency

A shorter or tighter guitar string sounds higher. The wave speed on the string explains why. Combining it with the earlier result gives f1=12LTμf_1=\frac{1}{2L}\sqrt{\frac{T}{\mu}}f1​=2L1​μT​​.

Here TTT is the tension in the string, in newtons. The symbol μ\muμ is the mass per unit length, in kg m−1\mathrm{kg\,m^{-1}}kgm−1.

Exam tip

In this formula TTT means tension, not the time period. Name the quantity in words when you use it.

Worked example

Calculate a fundamental frequency

A string of length 0.65 m0.65\,\mathrm{m}0.65m carries waves at 130 m s−1130\,\mathrm{m\,s^{-1}}130ms−1. Calculate its fundamental frequency and the frequency of the second harmonic.
  1. 1
    In words: fundamental frequency equals wave speed divided by twice the length.
  2. 2
    In symbols: f1=v2Lf_1=\frac{v}{2L}f1​=2Lv​.
  3. 3
    Substitute: f1=130 m s−12×0.65 m=1301.30 Hz=100 Hzf_1=\frac{130\,\mathrm{m\,s^{-1}}}{2\times0.65\,\mathrm{m}}=\frac{130}{1.30}\,\mathrm{Hz}=100\,\mathrm{Hz}f1​=2×0.65m130ms−1​=1.30130​Hz=100Hz.
  4. 4
    The second harmonic is 2f1=2×100 Hz=200 Hz2f_1=2\times100\,\mathrm{Hz}=200\,\mathrm{Hz}2f1​=2×100Hz=200Hz.

Answer: The fundamental frequency is 100 Hz100\,\mathrm{Hz}100Hz and the second harmonic is 200 Hz200\,\mathrm{Hz}200Hz.

The formula shows three links. A longer string lowers the frequency. A greater tension raises it. A heavier string, with larger μ\muμ, lowers it. Doubling the length halves f1f_1f1​. Doubling the tension multiplies f1f_1f1​ by 2\sqrt{2}2​.

Part 5 done

6

Part 6 of 6: Stationary waves transfer no net energy, unlike progressive waves

Now compare the stationary wave with a travelling one. A progressive wave moves through a medium and carries energy with it. Every point on it oscillates in turn.

Progressive and stationary waves compared

FeatureProgressive waveStationary wave
EnergyTransferred along the waveNo net transfer along the wave
AmplitudeSame at every pointZero at nodes, maximum at antinodes
PhaseChanges steadily along the waveSame between adjacent nodes
WavelengthDistance between neighbouring points in phaseTwice the distance between adjacent nodes
Feature
Energy
Progressive wave
Transferred along the wave
Stationary wave
No net transfer along the wave
Feature
Amplitude
Progressive wave
Same at every point
Stationary wave
Zero at nodes, maximum at antinodes
Feature
Phase
Progressive wave
Changes steadily along the wave
Stationary wave
Same between adjacent nodes
Feature
Wavelength
Progressive wave
Distance between neighbouring points in phase
Stationary wave
Twice the distance between adjacent nodes

In a stationary wave, the two travelling waves carry equal energy in opposite directions. The net energy transfer along the string is zero.

All points between adjacent nodes oscillate in phase, at the same frequency but with different amplitudes. Points on opposite sides of a node oscillate in antiphase. Energy is still present in the oscillating string, but it does not flow from one end to the other.

Key term

progressive wave

A progressive wave is a wave that transfers energy through a medium as each point oscillates in turn.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the principle of superposition.

    Show mark schemeHide mark scheme

    Model answer

    The resultant displacement where waves overlap equals the sum of the individual displacements, taking account of the direction of each.

    • 1 mark for stating that the resultant displacement is the sum of the individual displacements
    • 1 mark for stating that the direction (sign) of each displacement is included
  2. 2.Describe[3 marks]

    Describe how a stationary wave forms on a string fixed at both ends.

    Show mark schemeHide mark scheme

    Model answer

    A wave travels along the string and reflects at the fixed end. The incident and reflected waves have the same frequency and travel in opposite directions. They superpose to give a pattern with fixed nodes and antinodes.

    • 1 mark for stating that a wave reflects at the fixed end
    • 1 mark for stating that the two waves have the same frequency and travel in opposite directions and superpose
    • 1 mark for stating that the result is a pattern with fixed nodes and antinodes
  3. 3.Explain[2 marks]

    Explain why the string does not move at a node.

    Show mark schemeHide mark scheme

    Model answer

    The two waves always arrive at a node in antiphase. Their displacements are equal and opposite, so they cancel.

    • 1 mark for stating that the waves arrive in antiphase
    • 1 mark for explaining that their displacements cancel to give zero oscillation
  4. 4.Compare[4 marks]

    Compare a stationary wave with a progressive wave.

    Show mark schemeHide mark scheme

    Model answer

    A progressive wave transfers energy along the wave, but a stationary wave has no net energy transfer. A progressive wave has the same amplitude everywhere, but a stationary wave has zero amplitude at nodes and maximum amplitude at antinodes. In a progressive wave the phase changes steadily along the wave, but points between adjacent nodes in a stationary wave are in phase. A progressive wave has a wavelength equal to the distance between neighbouring points in phase, while in a stationary wave it is twice the distance between adjacent nodes.

    • 1 mark for stating that a progressive wave transfers energy but a stationary wave has no net transfer
    • 1 mark for stating that amplitude is the same everywhere for a progressive wave but varies from zero to maximum for a stationary wave
    • 1 mark for stating that phase changes steadily along a progressive wave but is the same between adjacent nodes in a stationary wave
    • 1 mark for relating wavelength to neighbouring in-phase points or to twice the node spacing
  5. 5.Calculate[3 marks]

    Calculate the fundamental frequency of a string of length 0.80 m0.80\,\mathrm{m}0.80m on which waves travel at 120 m s−1120\,\mathrm{m\,s^{-1}}120ms−1.

    Show mark schemeHide mark scheme

    Model answer

    f1=v2L=1202×0.80=75 Hzf_1=\frac{v}{2L}=\frac{120}{2\times0.80}=75\,\mathrm{Hz}f1​=2Lv​=2×0.80120​=75Hz.

    • 1 mark for using f1=v2Lf_1=\frac{v}{2L}f1​=2Lv​
    • 1 mark for substituting v=120 m s−1v=120\,\mathrm{m\,s^{-1}}v=120ms−1 and L=0.80 mL=0.80\,\mathrm{m}L=0.80m
    • 1 mark for obtaining 75 Hz75\,\mathrm{Hz}75Hz

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

Adjacent nodes on a stationary wave are separated by which distance?
Show answer and explanation

Answer: D · Worked explanation

Between two adjacent nodes the medium forms one loop, and one loop is half a wavelength long. A whole wavelength spans two loops, so it is the distance between alternate nodes. A quarter wavelength is the distance from a node to the next antinode.
4.

Medium·Calculate[1 mark]

Two waves overlap at a point. One has displacement +4.0 mm+4.0\,\mathrm{mm}+4.0mm and the other has −1.5 mm-1.5\,\mathrm{mm}−1.5mm. Calculate the resultant displacement.
Show answer and explanation

Answer: D · Worked explanation

Add the displacements with their signs: +4.0+(−1.5)=+2.5 mm+4.0+(-1.5)=+2.5\,\mathrm{mm}+4.0+(−1.5)=+2.5mm. The value +5.5 mm+5.5\,\mathrm{mm}+5.5mm comes from ignoring the minus sign on the second wave. The value +4.0 mm+4.0\,\mathrm{mm}+4.0mm comes from assuming the larger wave wins, which superposition does not say. Check the result by sketching the two displacements on a line, where a positive and a negative displacement partly cancel.
5.

Medium·Calculate[1 mark]

A string of length 0.60 m0.60\,\mathrm{m}0.60m is fixed at both ends and vibrates with one loop. Calculate the wavelength of the waves forming the pattern.
Show answer and explanation

Answer: B · Worked explanation

One loop is half a wavelength, so λ=2L=2×0.60 m=1.2 m\lambda=2L=2\times0.60\,\mathrm{m}=1.2\,\mathrm{m}λ=2L=2×0.60m=1.2m. The value 0.60 m0.60\,\mathrm{m}0.60m wrongly treats the string length as a whole wavelength. The value 0.30 m0.30\,\mathrm{m}0.30m halves the length instead of doubling it. Always double the length for one loop, since a whole wavelength covers two loops of the pattern.
6.

Medium·Calculate[2 marks]

Waves travel at 90 m s−190\,\mathrm{m\,s^{-1}}90ms−1 on a string of length 0.50 m0.50\,\mathrm{m}0.50m fixed at both ends. Calculate the fundamental frequency.
Show answer and explanation

Answer: C · Worked explanation

f1=v2L=902×0.50=90 Hzf_1=\frac{v}{2L}=\frac{90}{2\times0.50}=90\,\mathrm{Hz}f1​=2Lv​=2×0.5090​=90Hz. The value 180 Hz180\,\mathrm{Hz}180Hz comes from dividing speed by length without the factor of two. The value 270 Hz270\,\mathrm{Hz}270Hz is the frequency of the third harmonic, not the fundamental. Dividing by 2L=1.00 m2L=1.00\,\mathrm{m}2L=1.00m is the key step, and hertz follows from metres per second divided by metres.
7.

Medium·Identify[1 mark]

Identify a feature of a stationary wave that does not apply to a progressive wave.
Show answer and explanation

Answer: D · Worked explanation

In a stationary wave, all points between two adjacent nodes oscillate in phase. A progressive wave has the same amplitude everywhere, carries energy along its length and shows a steady change in phase. Those three features describe the progressive wave, not the stationary one.
8.

Hard·Determine[2 marks]

A string fixed at both ends vibrates in its third harmonic. Determine the number of nodes, including the two at the ends.
Show answer and explanation

Answer: B · Worked explanation

The third harmonic has three loops. Three loops have four boundaries between them, and each boundary is a node, so there are 4 nodes. The number 3 is the number of antinodes, one in each loop, which is easy to confuse with the number of nodes.
9.

Hard·Calculate[2 marks]

The tension in a string is increased to four times its value. The length and the mass per unit length stay the same. Calculate the factor by which the fundamental frequency changes.
Show answer and explanation

Answer: B · Worked explanation

Since f1=12LTμf_1=\frac{1}{2L}\sqrt{\frac{T}{\mu}}f1​=2L1​μT​​, the frequency is proportional to T\sqrt{T}T​. Quadrupling TTT multiplies f1f_1f1​ by 4=2\sqrt{4}=24​=2. A factor of 4 would apply only if frequency were directly proportional to tension, which it is not. A large change in tension therefore gives a smaller change in frequency.
10.

Hard·Compare[2 marks]

Points P and Q lie in neighbouring loops, on opposite sides of a node on a stationary wave. Compare their oscillations.
Show answer and explanation

Answer: C · Worked explanation

Points in adjacent loops oscillate in antiphase: when one is at maximum positive displacement the other is at maximum negative displacement. All points on the pattern share the same frequency. Points in phase with each other lie within the same loop, not on opposite sides of a node.

Keep going

Next topic3.3.2.1 InterferencePrevious topic3.3.1.2 Longitudinal and transverse waves

More in Section 3.3 · Waves

  1. 3.3.1.1Progressive wavesNotes · 10 questions
  2. 3.3.1.2Longitudinal and transverse wavesNotes · 10 questions
  3. 3.3.1.3Superposition and stationary wavesNotes · 10 questions
  4. 3.3.2.1InterferenceNotes · 10 questions
  5. 3.3.2.2DiffractionNotes · 10 questions
  6. 3.3.2.3Refraction at a plane surfaceNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/6 read

  1. 1Overlapping waves combine by adding their displacements
  2. 2Two waves travelling in opposite directions make a stationary wave
  3. 3Nodes and antinodes are fixed positions along the wave
  4. 4A fixed string allows only certain stationary wave patterns
  5. 5String length, tension and mass control the fundamental frequency
  6. 6Stationary waves transfer no net energy, unlike progressive waves
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe