Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA A-level Physics
  3. ›3.3 Waves
  4. ›3.3.2.1 Interference

AQA A-level Physics · Section 3.3 · Waves

3.3.2.1 Interference

Describe how two coherent waves interfere, explain constructive and destructive interference, and calculate path difference to decide which occurs.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Two coherent sources produce a steady interference pattern
  1. 1Two coherent sources produce a steady interference pattern
  2. 2Waves that arrive in phase reinforce each other
  3. 3Waves that arrive in antiphase cancel each other
  4. 4Path difference decides the kind of interference at a point
  5. 5Calculating path difference shows what happens at a point
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Two coherent sources produce a steady interference pattern

Place two loudspeakers side by side, both playing the same steady note. Walk across the room in front of them. The sound grows loud, then quiet, then loud again at regular intervals.

The sound waves from the two speakers overlap and combine. The loud and quiet places form the pattern. This effect is called interference.

A steady pattern needs coherent sources. Their waves have the same frequency and stay in step with each other.

Common mistake

Two separate lamps are not coherent. Their phases drift randomly, so no steady pattern forms.

Key terms · tap one for its definition

interference

Interference is the superposition of two or more waves, giving a pattern of regions of reinforcement and cancellation.

coherent

Coherent sources emit waves of the same frequency with a constant phase difference between them.

Part 1 done

2

Part 2 of 5: Waves that arrive in phase reinforce each other

Now take one point in the pattern where the two waves meet. Overlapping waves add their displacements at each point. This is the principle of superposition.

Waves can be ahead of or behind each other. The phase difference measures how far apart in the cycle they are, in degrees or radians. A phase difference of 0∘0^{\circ}0∘ or 360∘360^{\circ}360∘ means the waves are in phase.

Where waves arrive in phase, crest meets crest and trough meets trough. This is constructive interference. The resultant amplitude is the sum of the two amplitudes. Amplitude is the maximum displacement from the rest position. For sound, this is a loud place. For light, it is a bright place.

Key terms · tap one for its definition

phase difference

The phase difference between two waves is the fraction of a cycle by which one leads the other, expressed as an angle with 360∘360^{\circ}360∘ per cycle.

constructive interference

Constructive interference occurs when overlapping wave displacements add to give a larger resultant amplitude.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the condition for constructive interference at a point.
Show answer and explanation

Answer: D · Worked explanation

Constructive interference occurs when waves arrive in phase, so crest meets crest and displacements add. Arrival in antiphase gives cancellation, which is destructive interference. Equal amplitudes alone decide nothing about the type, because the phase relationship is what matters. Remember that the phase relationship, not the amplitude, decides the type of interference.
3

Part 3 of 5: Waves that arrive in antiphase cancel each other

Next, suppose the waves arrive with a phase difference of 180∘180^{\circ}180∘, or π\piπ radians. This is antiphase. One wave has a crest where the other has a trough.

Their displacements have opposite signs, so they oppose each other. This is destructive interference. Two waves of equal amplitude cancel completely, leaving zero displacement. For sound, this is a quiet place. For light, it is a dark place.

If the amplitudes differ, the cancellation is only partial. The resultant amplitude is then the difference of the two amplitudes.

Common mistake

Destructive interference does not destroy energy. The energy goes to places where constructive interference occurs.

Key term

destructive interference

Destructive interference occurs when overlapping wave displacements oppose each other.

Part 3 done

4

Part 4 of 5: Path difference decides the kind of interference at a point

Sources in phase start each cycle together. The phase difference at a point then depends on how much farther one wave has travelled. This extra distance is the path difference.

Figure 1. Wave 2 travels farther than wave 1 to reach P. The extra distance is the path difference.

For two sources in phase, constructive interference needs a path difference of a whole number of wavelengths. Destructive interference needs an odd number of half wavelengths. Here nnn is a whole number: 0, 1, 2 and so on.

Conditions for two sources in phase

TypePath differencePhase differenceResult
Constructivenλn\lambdanλ0∘0^{\circ}0∘, 360∘360^{\circ}360∘, 720∘720^{\circ}720∘Larger amplitude
Destructive(n+12)λ\left(n+\frac{1}{2}\right)\lambda(n+21​)λ180∘180^{\circ}180∘, 540∘540^{\circ}540∘, 900∘900^{\circ}900∘Smaller amplitude
Type
Constructive
Path difference
nλn\lambdanλ
Phase difference
0∘0^{\circ}0∘, 360∘360^{\circ}360∘, 720∘720^{\circ}720∘
Result
Larger amplitude
Type
Destructive
Path difference
(n+12)λ\left(n+\frac{1}{2}\right)\lambda(n+21​)λ
Phase difference
180∘180^{\circ}180∘, 540∘540^{\circ}540∘, 900∘900^{\circ}900∘
Result
Smaller amplitude

Path difference and phase difference are linked. One extra wavelength of path adds one full cycle of phase. If the sources are in antiphase, the two conditions swap.

Key term

path difference

Path difference is the difference between the distances waves travel from two sources to a point.

Part 4 done

Quick check

One question on the part you just read

Easy

State what is meant by coherent sources.
Show answer and explanation

Answer: A · Worked explanation

Coherent sources emit waves of the same frequency whose phase difference stays constant. Equal amplitude or equal distance is not the test. A random phase is the opposite of coherence, because it makes the pattern drift and prevents a steady result.
5

Part 5 of 5: Calculating path difference shows what happens at a point

To test a point, subtract the two distances from the sources. Then divide by the wavelength. A whole-number answer means constructive interference. An answer ending in a half means destructive interference.

Worked example

Decide the type of interference

Two loudspeakers in phase emit sound of wavelength 0.40 m0.40\,\mathrm{m}0.40m. A listener is 5.30 m5.30\,\mathrm{m}5.30m from one and 4.50 m4.50\,\mathrm{m}4.50m from the other. Determine the type of interference.
  1. 1
    In words: path difference equals the larger distance minus the smaller distance.
  2. 2
    Substitute: 5.30 m−4.50 m=0.80 m5.30\,\mathrm{m}-4.50\,\mathrm{m}=0.80\,\mathrm{m}5.30m−4.50m=0.80m.
  3. 3
    Divide by the wavelength: 0.80 m0.40 m=2.0\frac{0.80\,\mathrm{m}}{0.40\,\mathrm{m}}=2.00.40m0.80m​=2.0.
  4. 4
    A whole number of wavelengths means constructive interference.

Answer: The path difference is 0.80 m0.80\,\mathrm{m}0.80m, which is 2λ2\lambda2λ. The interference is constructive, so the sound is loud.

The same method works for water ripples, microwaves and light. Only the type of wave changes. As you move across the room, the path difference changes steadily, so loud and quiet places alternate.

Exam tip

Give the path difference in wavelengths when you justify the type of interference. A distance alone does not show your reasoning.

Go deeperFringe spacing and phase difference

The phase difference in degrees equals 360∘360^{\circ}360∘ multiplied by the path difference divided by the wavelength λ\lambdaλ. A path difference of half a wavelength therefore gives 180∘180^{\circ}180∘.

In a double-slit set-up with slit separation sss and screen distance DDD, bright fringes are a distance w=λDsw=\frac{\lambda D}{s}w=sλD​ apart. This holds when DDD is much larger than sss.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State what is meant by coherent sources.

    Show mark schemeHide mark scheme

    Model answer

    Coherent sources emit waves with the same frequency and a constant phase difference between them.

    • 1 mark for stating that the waves have the same frequency
    • 1 mark for stating that the phase difference is constant
  2. 2.Explain[3 marks]

    Explain how destructive interference occurs at a point where two waves of equal amplitude meet.

    Show mark schemeHide mark scheme

    Model answer

    The waves arrive at the point in antiphase. Their displacements are equal and opposite. By superposition they add to zero, so the resultant displacement is zero.

    • 1 mark for stating that the waves arrive in antiphase
    • 1 mark for stating that the displacements are equal and opposite
    • 1 mark for stating that the resultant displacement is zero by superposition
  3. 3.State[2 marks]

    State the condition on path difference for constructive interference between two sources in phase.

    Show mark schemeHide mark scheme

    Model answer

    The path difference must be a whole number of wavelengths, nλn\lambdanλ, where n=0,1,2,…n=0,1,2,\dotsn=0,1,2,…

    • 1 mark for stating that the path difference is a whole number of wavelengths
    • 1 mark for giving the condition as nλn\lambdanλ with nnn a whole number
  4. 4.Calculate[3 marks]

    Calculate the path difference at a point 6.75 m6.75\,\mathrm{m}6.75m from one source and 6.30 m6.30\,\mathrm{m}6.30m from another source in phase, where the wavelength is 0.30 m0.30\,\mathrm{m}0.30m. State the type of interference.

    Show mark schemeHide mark scheme

    Model answer

    Path difference =6.75−6.30=0.45 m=6.75-6.30=0.45\,\mathrm{m}=6.75−6.30=0.45m. This is 0.450.30=1.5\frac{0.45}{0.30}=1.50.300.45​=1.5 wavelengths, so the interference is destructive.

    • 1 mark for subtracting the distances to obtain 0.45 m0.45\,\mathrm{m}0.45m
    • 1 mark for dividing by the wavelength to obtain 1.5 wavelengths
    • 1 mark for stating that the interference is destructive
  5. 5.Suggest[2 marks]

    Suggest why two separate torches do not produce a steady interference pattern.

    Show mark schemeHide mark scheme

    Model answer

    The torches are not coherent. The phase difference between their waves changes randomly, so no fixed pattern forms.

    • 1 mark for stating that the sources are not coherent
    • 1 mark for stating that the phase difference changes randomly so no fixed pattern forms
  6. 6.Describe[3 marks]

    Describe what you would observe when walking across the room in front of two loudspeakers that emit the same note in phase.

    Show mark schemeHide mark scheme

    Model answer

    The loudness alternates between loud and quiet at regular intervals. Loud places occur where constructive interference takes place. Quiet places occur where destructive interference takes place.

    • 1 mark for stating that loud and quiet places alternate
    • 1 mark for linking loud places to constructive interference
    • 1 mark for linking quiet places to destructive interference

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the path difference that gives destructive interference for two sources in phase.
Show answer and explanation

Answer: C · Worked explanation

Destructive interference needs a path difference of an odd number of half wavelengths, and λ2\frac{\lambda}{2}2λ​ is the smallest. A path difference of 0, λ\lambdaλ or 2λ2\lambda2λ is a whole number of wavelengths, which gives constructive interference. This is why the half-wavelength path difference is the first place where a quiet or dark point appears.
4.

Medium·Calculate[1 mark]

Two sources in phase emit waves of wavelength 0.50 m0.50\,\mathrm{m}0.50m. A point is 7.80 m7.80\,\mathrm{m}7.80m from one source and 6.30 m6.30\,\mathrm{m}6.30m from the other. Calculate the path difference in wavelengths.
Show answer and explanation

Answer: D · Worked explanation

Path difference =7.80−6.30=1.50 m=7.80-6.30=1.50\,\mathrm{m}=7.80−6.30=1.50m, and 1.500.50=3.0\frac{1.50}{0.50}=3.00.501.50​=3.0 wavelengths. The value 1.5 is the distance in metres, not wavelengths. The value 28 comes from adding the distances instead of subtracting them. Always subtract the distances to find path difference, then divide by the wavelength.
5.

Medium·Predict[2 marks]

Two sources in phase emit waves of wavelength 0.20 m0.20\,\mathrm{m}0.20m. At a point, the path difference is 0.50 m0.50\,\mathrm{m}0.50m. Predict the type of interference.
Show answer and explanation

Answer: B · Worked explanation

The path difference is 0.500.20=2.5\frac{0.50}{0.20}=2.50.200.50​=2.5 wavelengths, an odd number of half wavelengths, so interference is destructive. A path difference greater than the wavelength says nothing about the type. A non-whole number still gives interference, which is partial or total depending on the value.
6.

Medium·Calculate[2 marks]

Two waves with amplitudes 3.0 cm3.0\,\mathrm{cm}3.0cm and 1.0 cm1.0\,\mathrm{cm}1.0cm meet in antiphase. Calculate the resultant amplitude.
Show answer and explanation

Answer: B · Worked explanation

In antiphase the displacements oppose each other, so the resultant amplitude is 3.0−1.0=2.0 cm3.0-1.0=2.0\,\mathrm{cm}3.0−1.0=2.0cm. The value 4.0 cm4.0\,\mathrm{cm}4.0cm comes from adding, which applies to waves in phase. Complete cancellation to 0 cm0\,\mathrm{cm}0cm needs equal amplitudes. Complete cancellation would occur only if the two amplitudes were equal.
7.

Medium·Explain[1 mark]

Explain what happens to the energy of two waves at a point of complete destructive interference.
Show answer and explanation

Answer: C · Worked explanation

Energy is not destroyed. The overall pattern redistributes it, so the regions of constructive interference receive more than they would from either wave alone. Conversion to thermal energy at the point is not needed to explain the cancellation, and nothing sends the energy back to the sources.
8.

Hard·Predict[2 marks]

Two sources emit identical waves in antiphase. Predict the type of interference at a point equidistant from both sources.
Show answer and explanation

Answer: B · Worked explanation

The path difference is zero, but the waves leave the sources in antiphase and travel equal distances, so they arrive in antiphase and cancel. The conditions for in-phase sources swap for antiphase sources. Antiphase sources are still coherent, because their phase difference is constant.
9.

Hard·Determine[2 marks]

Two sources in phase emit waves of wavelength 0.30 m0.30\,\mathrm{m}0.30m. A point is 2.40 m2.40\,\mathrm{m}2.40m from one source. Determine the distance from the other source that gives destructive interference.
Show answer and explanation

Answer: C · Worked explanation

At 2.85 m2.85\,\mathrm{m}2.85m the path difference is 0.45 m=1.5λ0.45\,\mathrm{m}=1.5\lambda0.45m=1.5λ, giving destructive interference. The distance 2.70 m2.70\,\mathrm{m}2.70m gives 1λ1\lambda1λ, 3.00 m3.00\,\mathrm{m}3.00m gives 2λ2\lambda2λ and 3.30 m3.30\,\mathrm{m}3.30m gives 3λ3\lambda3λ, all whole numbers of wavelengths, so each gives constructive interference. Check each distance in turn by subtracting 2.40 m2.40\,\mathrm{m}2.40m and dividing by 0.30 m0.30\,\mathrm{m}0.30m.
10.

Hard·Determine[2 marks]

Two sources in phase emit waves of wavelength 0.50 m0.50\,\mathrm{m}0.50m. A detector moves so that the path difference increases steadily from 0 to 2.00 m2.00\,\mathrm{m}2.00m. Determine the number of positions of destructive interference.
Show answer and explanation

Answer: D · Worked explanation

Destructive interference occurs at path differences of 0.25, 0.75, 1.25 and 1.75 m1.75\,\mathrm{m}1.75m, which is 4 positions. The end values 0 and 2.00 m2.00\,\mathrm{m}2.00m are whole numbers of wavelengths, so they are constructive. Counts of 3 or 5 come from miscounting at the ends of the range.

Keep going

Next topic3.3.2.2 DiffractionPrevious topic3.3.1.3 Superposition and stationary waves

More in Section 3.3 · Waves

  1. 3.3.1.1Progressive wavesNotes · 10 questions
  2. 3.3.1.2Longitudinal and transverse wavesNotes · 10 questions
  3. 3.3.1.3Superposition and stationary wavesNotes · 10 questions
  4. 3.3.2.1InterferenceNotes · 10 questions
  5. 3.3.2.2DiffractionNotes · 10 questions
  6. 3.3.2.3Refraction at a plane surfaceNotes · 10 questions

All AQA A-level Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Two coherent sources produce a steady interference pattern
  2. 2Waves that arrive in phase reinforce each other
  3. 3Waves that arrive in antiphase cancel each other
  4. 4Path difference decides the kind of interference at a point
  5. 5Calculating path difference shows what happens at a point
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe