AQA A-level Physics · Section 3.9 · Option: Astrophysics
3.9.1 Telescopes
Describe how refracting and reflecting telescopes form images, compare their strengths, and calculate magnification and angular resolution.
1/6A refracting telescope uses two converging lenses to magnify distant objects
- A refracting telescope uses two converging lenses to magnify distant objects
- Angular magnification compares the final angle with the original angle
- Reflecting telescopes use a mirror instead of a large lens
- A wider objective collects more light from faint sources
- Diffraction limits the angular resolution of any telescope
- Radio telescopes need very large dishes to resolve detail
- Check your recall
- Practice: 10 questions
Part 1 of 6: A refracting telescope uses two converging lenses to magnify distant objects
A star is so far away that light from one point on it arrives as a parallel beam. A telescope must make such light look larger and brighter. A refracting telescope does this with two converging lenses.
The objective lens has a long focal length. It forms a real image of the distant object at its focal point. The eyepiece lens has a short focal length and acts as a magnifying glass on that image.
The final image is inverted, which does not matter when looking at stars.
Key terms · tap one for its definition
objective lens
An objective lens is the first lens of a refracting telescope; it has a long focal length and forms a real image.
eyepiece lens
An eyepiece lens is the short-focal-length lens through which the observer views the image formed by the objective.
Part 2 of 6: Angular magnification compares the final angle with the original angle
Now that the image exists, we need a way to say how much larger it looks. The angular magnification, , compares the angle of the final image with the angle of the object seen directly. It has no unit.
A telescope is in normal adjustment when the final image is at infinity. The focal points of the two lenses then coincide. In this case , where and are the angles at the eye and at the object.
The lens separation is then . A long and a short give a high magnification.
Worked example
Magnification and lens separation
- Convert the eyepiece focal length: .
- Magnification is the ratio of the focal lengths: .
- Substitute: .
- Separation is the sum of the focal lengths: .
Answer: The angular magnification is 50 and the lens separation is .
Key terms · tap one for its definition
angular magnification
Angular magnification is the angle subtended at the eye by the final image divided by the angle subtended by the object, with no unit.
normal adjustment
Normal adjustment is the setting of a telescope in which the final image is at infinity, so the focal points of its lenses coincide.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: A · Worked explanation
Part 3 of 6: Reflecting telescopes use a mirror instead of a large lens
Large lenses are heavy, and glass sags when it is held only at its edge. So most large telescopes use mirrors. A Cassegrain arrangement is a common design.
A concave parabolic primary mirror reflects the parallel beam towards a focus. A small convex secondary mirror reflects the light back through a hole in the primary. The eyepiece sits behind that hole.
A lens bends each colour by a different amount, so images show coloured edges. This fault is chromatic aberration. A mirror reflects all colours equally, so it has none.
Refracting and reflecting telescopes compared
- Feature
- Objective
- Refracting
- Lens
- Reflecting
- Concave mirror
- Feature
- Chromatic aberration
- Refracting
- Present
- Reflecting
- None from the mirror
- Feature
- Support
- Refracting
- Held by its edge only
- Reflecting
- Supported across its back
- Feature
- Large sizes
- Refracting
- Hard to make and heavy
- Reflecting
- Easier to make
- Feature
- Disadvantage
- Refracting
- Some light absorbed in the glass
- Reflecting
- Secondary mirror blocks some light
Key terms · tap one for its definition
Cassegrain arrangement
A Cassegrain arrangement is a reflecting design where a convex secondary mirror sends light through a hole in the concave primary mirror.
chromatic aberration
Chromatic aberration is coloured blurring of an image because a lens focuses different wavelengths at different distances.
Part 4 of 6: A wider objective collects more light from faint sources
Reflectors can be made much wider than refractors, and width matters in two ways. The first is brightness. The collecting power of a telescope is the radiation energy it collects each second.
Collecting power is proportional to the area of the objective. Area depends on the square of the diameter , so collecting power is proportional to .
Doubling the diameter gives four times the collecting power. A mirror collects 100 times as much radiation as a mirror. Faint, distant objects therefore need large telescopes.
Key term
collecting power
The collecting power of a telescope is the radiation energy it collects per unit time, proportional to the area of its objective.

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 5 of 6: Diffraction limits the angular resolution of any telescope
Collecting power decides how faint an object can be. Resolution decides how much detail appears. Light spreads out as it passes through the circular opening of the objective. This diffraction makes each point source a small bright disc with faint rings.
The angular resolution is the smallest angle at which two point sources can just be told apart. A smaller angle means greater resolving power. The Rayleigh criterion gives the limit. Two sources are just resolved when the centre of one pattern lies on the first minimum of the other.
For a circular aperture of diameter and light of wavelength , , with in radians. A larger or a shorter gives a smaller .
Worked example
Angular resolution of an optical telescope
- Angular resolution is the wavelength divided by the diameter: .
- Convert the wavelength: .
- Substitute: .
Answer: The angular resolution is .
Key terms · tap one for its definition
angular resolution
The angular resolution of a telescope is the smallest angle, in radians, at which two point sources are just distinguished: .
Rayleigh criterion
The Rayleigh criterion says two point sources are just resolved when the central maximum of one pattern lies on the first minimum of the other.
Part 6 of 6: Radio telescopes need very large dishes to resolve detail
Stars and galaxies also emit radio waves, which pass through the atmosphere and cloud. A radio telescope collects them with a large parabolic dish. The dish reflects the waves to a receiver at its focus.
The receiver signal is amplified and processed by a computer. The result is a map of radio intensity across the sky, not a picture seen by eye.
Radio waves have wavelengths far longer than light. For the same diameter, then gives a much larger angle. A radio dish must be very large to match an optical telescope. Several dishes can also be linked to act as one wide aperture.
Optical and radio telescopes compared
- Feature
- Wavelength
- Optical
- Hundreds of nanometres
- Radio
- Millimetres to metres
- Feature
- Detector
- Optical
- Eye or CCD
- Radio
- Receiver and amplifier
- Feature
- Observing
- Optical
- Clear, dark sky
- Radio
- Day or night, through cloud
- Feature
- Resolution at equal diameter
- Optical
- Better
- Radio
- Worse
Key term
radio telescope
A radio telescope is a telescope that uses a large parabolic dish to focus radio waves onto a receiver for amplification and analysis.
Check your recall[14 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.Describe[3 marks]
Describe how a refracting telescope in normal adjustment forms a final image of a distant star.
Show mark schemeHide mark scheme
Model answer
The objective lens, which has a long focal length, forms a real image of the star at its focal point. The eyepiece lens, with a short focal length, acts as a magnifying glass on that image. In normal adjustment the focal points coincide, so the final image is at infinity.
- 1 mark for stating that the objective lens forms a real image at its focal point
- 1 mark for stating that the eyepiece lens magnifies this image
- 1 mark for stating that the focal points coincide so the final image is at infinity
- 2.Calculate[2 marks]
Calculate the angular magnification of a telescope in normal adjustment with an objective of focal length and an eyepiece of focal length .
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for substituting both focal lengths in the same unit
- 1 mark for obtaining an angular magnification of 30
- 3.State[1 mark]
State how the collecting power changes when the diameter of the objective is halved.
Show mark schemeHide mark scheme
Model answer
The collecting power falls to one quarter.
- 1 mark for stating that the collecting power becomes one quarter
- 4.Compare[3 marks]
Compare the objective of a refracting telescope with that of a reflecting telescope.
Show mark schemeHide mark scheme
Model answer
A refracting telescope uses a lens, while a reflecting telescope uses a mirror. The lens shows chromatic aberration but the mirror does not. A large lens is held only at its edge and is heavy, whereas a mirror is supported across its whole back.
- 1 mark for stating that one uses a lens and the other a mirror
- 1 mark for stating that the lens shows chromatic aberration and the mirror does not
- 1 mark for stating that a large lens is supported only at its edge, whereas a mirror is supported across its back
- 5.Explain[3 marks]
Explain why a radio telescope needs a much larger diameter than an optical telescope to achieve the same angular resolution.
Show mark schemeHide mark scheme
Model answer
Radio waves have a much longer wavelength than light. Since , the same needs a larger when is larger. So the dish diameter must be much greater.
- 1 mark for stating that radio waves have a much longer wavelength
- 1 mark for using
- 1 mark for concluding that must be larger for the same angle
- 6.Calculate[2 marks]
Calculate the angular resolution of a telescope of diameter for light of wavelength .
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for converting the wavelength to metres and substituting into
- 1 mark for obtaining

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
EasyState[1 mark]
Show answer and explanation
Answer: C · Worked explanation
MediumCalculate[1 mark]
Show answer and explanation
Answer: D · Worked explanation
MediumCalculate[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumCalculate[1 mark]
Show answer and explanation
Answer: A · Worked explanation
MediumCompare[1 mark]
Show answer and explanation
Answer: C · Worked explanation
Hard[2 marks]
Show answer and explanation
Answer: B · Worked explanation
Hard[2 marks]
Show answer and explanation
Answer: B · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: C · Worked explanation