Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›5.10 Chemistry: Using resources
  4. ›5.10.2 Life cycle assessment and recycling

AQA GCSE Combined Science: Trilogy · Section 5.10 · Chemistry: Using resources

5.10.2 Life cycle assessment and recycling

Describe life cycle assessment and compare the environmental effects of recycling different materials.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Life cycle assessments consider a product from start to finish
  1. 1Life cycle assessments consider a product from start to finish
  2. 2Life cycle comparisons depend on evidence and judgement
  3. 3Recycling can reduce extraction and waste
  4. 4Different materials bring different recycling trade-offs
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Life cycle assessments consider a product from start to finish

A life cycle assessment examines a product’s environmental effects throughout its life. It helps compare products and identify stages where damage could be reduced. The assessment begins with raw material extraction, such as obtaining metal ores or crude oil. It then considers processing, manufacture, packaging and transport. Next comes the use stage, which may require energy or replacement parts. Finally, it considers disposal, reuse or recycling.

A product can cause different effects at each stage. These include using resources, releasing greenhouse gases and producing waste. Looking only at manufacture can therefore give a misleading picture.

Figure 1. Environmental effects can occur at every stage. Recycling returns material for further processing.

Key terms · tap one for its definition

life cycle assessment

An evaluation of a product’s environmental effects from obtaining raw materials through to its final disposal or recovery.

raw material extraction

Obtaining natural resources that will be processed to make a product.

use stage

The part of a product’s life when it is used and may consume energy or need maintenance.

Part 1 done

2

Part 2 of 4: Life cycle comparisons depend on evidence and judgement

An assessment gathers information about resource use, energy consumption, emissions and waste. Some effects are difficult to measure. For example, the harm caused by different pollutants may be uncertain. Data may also be missing for parts of a product’s life.

People must decide how much importance to give each environmental impact. One product might use less energy but create more waste. The preferred choice then depends partly on how those effects are weighed. A life cycle assessment can guide decisions, but it does not always produce one clear answer.

Common mistake

A life cycle assessment is not just a measure of carbon emissions. It considers several environmental effects across the product’s life.

Key terms · tap one for its definition

resource use

The consumption of materials, water or energy when making, using or disposing of a product.

environmental impact

An effect on the environment, such as resource depletion, pollution or waste production.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the main purpose of a life cycle assessment (LCA) of a product.
Show answer and explanation

Answer: A · Worked explanation

An LCA is used to assess the environmental impacts associated with a product across its life, from obtaining raw materials to disposal. It can help compare products or identify stages with larger impacts. An LCA cannot prove that a product has no environmental impact, because making and using products generally involve resource use or emissions.
3

Part 3 of 4: Recycling can reduce extraction and waste

Recycling processes used materials into materials for new products. It can reduce demand for newly extracted resources. This helps conserve finite supplies and can reduce damage caused by extraction. It also diverts some waste from landfill.

The benefits are not automatic. Collecting and transporting waste uses fuel. Sorting, cleaning and processing it use energy and may create emissions. The environmental benefit depends on the material, the process and the transport involved. Reuse keeps an item in use without first turning it into a new material. Where practical, it can avoid some processing needed for recycling.

Exam tip

When explaining a benefit, name the stage affected. For example, recycling metal can reduce the need to extract ore.

Key terms · tap one for its definition

recycling

Processing used materials so they can become materials for new products.

reuse

Using an item again without first processing it into a new material.

Part 3 done

4

Part 4 of 4: Different materials bring different recycling trade-offs

Recycling methods differ because materials have different properties. Metal recycling usually needs less energy than extracting metal from ore, but collecting and remelting metal still use energy. Glass recycling reduces demand for new raw materials. However, glass is heavy to transport, and remelting it needs heat. Glass containers can also be washed and reused where suitable.

Plastic recycling can reduce demand for crude oil. Different plastics may need separating, and contamination can make processing difficult. Paper recycling can reduce demand for new wood and divert waste from landfill. Its fibres become shorter with repeated processing, so new fibres may eventually be needed. Compare these effects across the whole life cycle rather than assuming one material is always best.

Key terms · tap one for its definition

metal recycling

Recovering metal from used products and processing it for use in new products.

glass recycling

Processing waste glass, often by remelting it, to make new glass products.

plastic recycling

Processing waste plastic into material for new plastic products.

Note read

Check your recall[15 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State one purpose of a life cycle assessment.

    Show mark schemeHide mark scheme

    Model answer

    It helps compare the environmental effects of products throughout their lives.

    • 1 mark for stating that it compares environmental effects of products, or identifies stages where these effects could be reduced
  2. 2.Describe[4 marks]

    Describe the main stages considered in a life cycle assessment.

    Show mark schemeHide mark scheme

    Model answer

    It considers raw material extraction, processing and manufacture, transport and use, then disposal, reuse or recycling.

    • 1 mark for identifying raw material extraction
    • 1 mark for identifying processing or manufacture
    • 1 mark for identifying transport or use
    • 1 mark for identifying disposal, reuse or recycling
  3. 3.Explain[4 marks]

    Explain two ways recycling metal can benefit the environment.

    Show mark schemeHide mark scheme

    Model answer

    Recycling metal reduces the need to extract ore, which conserves resources and can reduce extraction damage. It usually needs less energy than extracting metal from ore, so it can reduce emissions from energy use.

    • 1 mark for stating that recycling reduces the need to extract metal ore
    • 1 mark for linking reduced extraction to conserving resources or reducing environmental damage
    • 1 mark for stating that metal recycling usually needs less energy than extracting metal from ore
    • 1 mark for linking lower energy use to a possible reduction in emissions
  4. 4.Compare[4 marks]

    Compare one advantage and one disadvantage of recycling glass and plastic.

    Show mark schemeHide mark scheme

    Model answer

    Recycling glass reduces demand for new raw materials, but transporting heavy glass and remelting it use energy. Recycling plastic reduces demand for crude oil, but different plastics may need sorting and contamination can hinder processing.

    • 1 mark for giving reduced demand for new raw materials as an advantage of glass recycling
    • 1 mark for giving transport weight or remelting energy as a disadvantage of glass recycling
    • 1 mark for giving reduced demand for crude oil as an advantage of plastic recycling
    • 1 mark for giving sorting or contamination as a difficulty with plastic recycling
  5. 5.Explain[2 marks]

    Explain why two life cycle assessments might reach different conclusions.

    Show mark schemeHide mark scheme

    Model answer

    Some environmental effects are difficult to measure or have missing data. People may also give different importance to each effect.

    • 1 mark for identifying uncertainty or missing data about environmental effects
    • 1 mark for explaining that different weighting of environmental effects can change the preferred choice

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State which sequence gives the main stages considered in a life cycle assessment.
Show answer and explanation

Answer: B · Worked explanation

An LCA considers the impacts of obtaining raw materials, manufacturing the product, using it and disposing of it. These stages provide a broad account of the product's life cycle. Advertising and pricing are not the main life-cycle stages used to assess environmental impact.
3.

Easy·Identify[1 mark]

Identify one way recycling can benefit the environment.
Show answer and explanation

Answer: C · Worked explanation

Recycling can reduce demand for newly extracted raw materials, helping to conserve resources and reduce impacts from extraction. It does not make resources infinitely available or eliminate all waste. Recycled materials and finished products may still need to be transported.
4.

Easy·Identify[1 mark]

Identify a common practical disadvantage of recycling household waste.
Show answer and explanation

Answer: B · Worked explanation

Household waste may contain mixed or contaminated materials, so sorting and cleaning can be needed before recycling. This can add cost and use energy. Recycling can make materials useful again, but it does not remove every impact associated with processing or disposal.
5.

Medium·Deduce[2 marks]

A company compares two containers. Container P has a greater impact during manufacture, while container Q has a greater impact during disposal. What can an LCA help the company do?
Show answer and explanation

Answer: D · Worked explanation

An LCA considers impacts at multiple stages, so the company can compare the overall impacts rather than selecting one stage in isolation. The relative importance of impacts may require assumptions or value judgements, and measurements can be difficult. Container P cannot be judged better simply because its impact occurs earlier.
6.

Medium·Identify[1 mark]

A reusable bottle is assessed from the mining of its raw materials to its eventual disposal. Which activity belongs to the use stage?
Show answer and explanation

Answer: B · Worked explanation

Washing the bottle is part of how it is used, and repeated washing can have environmental impacts such as using water and energy. Mining belongs to raw-material extraction, forming the bottle belongs to manufacture, and sending it for recycling is part of disposal or end-of-life management.
7.

Medium·Calculate[2 marks]

A factory needs 500 kg of a metal. Making it from new ore uses 12 MJ of energy per kilogram, while using recycled metal uses 4 MJ per kilogram. Calculate the energy saved by using recycled metal for the 500 kg.
Show answer and explanation

Answer: A · Worked explanation

The saving per kilogram is 12−4=8 MJ12 - 4 = 8\,\text{MJ}12−4=8MJ. For 500 kg500\,\text{kg}500kg, the total saving is 500×8=4,000 MJ500 \times 8 = 4{,}000\,\text{MJ}500×8=4,000MJ. The 6,000 MJ6{,}000\,\text{MJ}6,000MJ option is the energy used to make the metal from new ore, not the energy saved.
8.

Medium·Compare[2 marks]

A council is choosing between recycling clean glass bottles and mixed plastic packaging. Which comparison is most reasonable?
Show answer and explanation

Answer: B · Worked explanation

Glass can often be crushed and remelted, whereas mixed plastics may require sorting because different polymers have different properties and processing requirements. The exact impacts depend on the material and local processes. The claim that glass recycling uses no energy is too absolute: collection, transport and remelting all have impacts.
9.

Medium·Determine[2 marks]

A recycling plant receives 100 kg of paper. Of this, 15 kg is too contaminated to recycle and is sent to landfill. Determine the mass of paper available for recycling.
Show answer and explanation

Answer: C · Worked explanation

Subtract the contaminated paper from the total: 100−15=85 kg100 - 15 = 85\,\text{kg}100−15=85kg. Therefore, 85 kg85\,\text{kg}85kg is available for recycling. The 15 kg15\,\text{kg}15kg is the amount rejected, not the amount that can be recycled.
10.

Hard·Evaluate[2 marks]

A reusable cup lasts for many years, but its manufacture has a larger impact than making a disposable cup. What information would be most useful when using an LCA to decide which cup has the lower overall impact?
Show answer and explanation

Answer: C · Worked explanation

A fair comparison needs to account for the relevant life-cycle stages and compare the cups over the same number of uses. The reusable cup's manufacturing impact may be spread across many uses, but washing and disposal also matter. Considering manufacture alone would miss these effects and could lead to an incomplete conclusion.

Keep going

Next topic6.1.1 Energy changes in a systemPrevious topic5.10.1 Earth's resources and potable water

More in Section 5.10 · Chemistry: Using resources

  1. 5.10.1Earth's resources and potable waterNotes · 9 questions
  2. 5.10.2Life cycle assessment and recyclingNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Life cycle assessments consider a product from start to finish
  2. 2Life cycle comparisons depend on evidence and judgement
  3. 3Recycling can reduce extraction and waste
  4. 4Different materials bring different recycling trade-offs
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe