Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.1 Physics: Energy
  4. ›6.1.1 Energy changes in a system

AQA GCSE Combined Science: Trilogy · Section 6.1 · Physics: Energy

6.1.1 Energy changes in a system

Describe energy stores and transfers, then calculate energy changes, kinetic energy and work done.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Energy can be held in several different stores
  1. 1Energy can be held in several different stores
  2. 2Energy moves between stores through transfer pathways
  3. 3Heating a substance raises its thermal energy
  4. 4Kinetic energy increases with mass and squared speed
  5. 5A force transfers energy when it moves an object
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Energy can be held in several different stores

An object or system can have energy in different stores. A moving bicycle has a kinetic store. A hot drink has a thermal store. Fuel and food have chemical stores. The amount of energy in a store can change when energy is transferred.

  • Gravitational potential store: a raised object.
  • Elastic potential store: a stretched spring.
  • Magnetic store: magnets that attract or repel.
  • Electrostatic store: separated electric charges.
  • Nuclear store: the nucleus of an atom.

Common mistake

Electricity is not an energy store. An electric current transfers energy between stores.

Key terms · tap one for its definition

kinetic store

The kinetic store is the energy store of a moving object.

thermal store

The thermal store holds energy associated with the temperature of an object or system.

chemical stores

Chemical stores hold energy associated with substances, including fuels and food.

Part 1 done

2

Part 2 of 5: Energy moves between stores through transfer pathways

Describe an energy change by naming the starting store, transfer pathway and receiving store. Mechanical transfer happens when a force moves an object. Electrical transfer happens when charges move through a circuit. Energy can also transfer by heating or by waves, including light and sound.

In a torch, energy leaves the battery’s chemical store. Moving charges transfer it electrically to the lamp. Light waves then transfer some energy to the surroundings. Heating also increases the thermal stores of the lamp and surroundings.

Figure 1. Follow energy from the battery to the surroundings. The arrows show transfer pathways, not additional stores.

Exam tip

Name both stores and the pathway between them. Do not describe light or electricity as a store.

Key terms · tap one for its definition

Mechanical transfer

Mechanical transfer moves energy between stores when a force moves an object.

Electrical transfer

Electrical transfer moves energy between stores through moving electric charges.

heating

Heating transfers energy because of a temperature difference.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the energy store that increases when a battery is charged.
Show answer and explanation

Answer: B · Worked explanation

Charging transfers energy into the battery’s chemical store, where it is stored by changes in the chemicals. The kinetic store is associated with moving objects, while the gravitational potential store depends on an object’s position in a gravitational field. A battery may become slightly warmer, but that is not the store in which the intended energy is stored.
3

Part 3 of 5: Heating a substance raises its thermal energy

The energy needed to warm a substance depends on its mass, temperature change and specific heat capacity. Specific heat capacity is the energy needed to raise 1 kg of a substance by 1 °C. Use ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ. Here, ΔE\Delta EΔE is energy in joules, mmm is mass in kilograms, and ccc is specific heat capacity in J/kg ∘C−1\mathrm{J/kg\,^{\circ}C^{-1}}J/kg∘C−1. The temperature change, Δθ\Delta\thetaΔθ, is measured in °C.

Worked example

Energy needed to heat water

A 0.50 kg sample of water warms from 20 °C to 30 °C. Its specific heat capacity is 4200 J/kg ∘C−14200\ \mathrm{J/kg\,^{\circ}C^{-1}}4200 J/kg∘C−1. Calculate its energy gain.
  1. 1
    Δθ=30−20=10 ∘C\Delta\theta=30-20=10\ ^{\circ}\mathrm{C}Δθ=30−20=10 ∘C.
  2. 2
    ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ.
  3. 3
    ΔE=0.50×4200×10=21000 J\Delta E=0.50\times4200\times10=21000\ \mathrm{J}ΔE=0.50×4200×10=21000 J.

Answer: The water gains 21,000 J of energy.

Key terms · tap one for its definition

mass

Mass measures the amount of matter in an object and is measured in kilograms.

temperature change

Temperature change is the final temperature minus the initial temperature.

specific heat capacity

Specific heat capacity is the energy needed to raise the temperature of 1 kg of a substance by 1 °C.

Part 3 done

4

Part 4 of 5: Kinetic energy increases with mass and squared speed

An object in motion has kinetic energy. Calculate it using Ek=12mv2E_k=\frac{1}{2}mv^2Ek​=21​mv2. Here, mmm is mass in kilograms and vvv is speed in m/s\mathrm{m/s}m/s. The answer is in joules. Squaring speed means doubling speed makes kinetic energy four times as large, if mass stays the same.

Worked example

Kinetic energy of a moving object

A 2 kg object travels at 3 m/s3\ \mathrm{m/s}3 m/s. Calculate its kinetic energy.
  1. 1
    Ek=12mv2E_k=\frac{1}{2}mv^2Ek​=21​mv2.
  2. 2
    Ek=12×2×32E_k=\frac{1}{2}\times2\times3^2Ek​=21​×2×32.
  3. 3
    Ek=1×9=9 JE_k=1\times9=9\ \mathrm{J}Ek​=1×9=9 J.

Answer: The object has 9 J of kinetic energy.

Common mistake

Square the speed before multiplying. Do not square the mass.

Key terms · tap one for its definition

kinetic energy

Kinetic energy is the energy an object has because it moves.

speed

Speed is distance travelled per unit time.

joules

Joules are units used to measure energy and work done.

Part 4 done

Quick check

One question on the part you just read

Easy

State the main energy transfer when a person uses a heater to warm a room.
Show answer and explanation

Answer: C · Worked explanation

The heater receives energy electrically and transfers energy to thermal stores as it warms up the room. The room does not gain a meaningful kinetic or gravitational potential store from being heated. Light or sound may be produced by some heaters, but neither is the main transfer responsible for warming the room.
5

Part 5 of 5: A force transfers energy when it moves an object

Work done is energy transferred when a force moves an object. For a force acting along the movement, use W=FsW=FsW=Fs. Here, FFF is force in newtons and sss is the distance moved in metres along the force. Work done, WWW, is measured in joules. One joule is transferred when a force of one newton moves an object one metre along that force.

Worked example

Work done by a pushing force

A constant 20 N force pushes a box 3 m in the force’s direction. Calculate the work done.
  1. 1
    W=FsW=FsW=Fs.
  2. 2
    W=20×3=60 JW=20\times3=60\ \mathrm{J}W=20×3=60 J.

Answer: The force does 60 J of work and transfers 60 J of energy.

A force does no work on an object if the object does not move.

Key terms · tap one for its definition

Work done

Work done is the energy transferred when a force moves an object through a distance.

force

A force is a push or pull, measured in newtons.

distance moved

Distance moved is the length of the movement used to calculate work done.

Note read

Check your recall[16 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Give[3 marks]

    Give three energy stores and an example of each.

    Show mark schemeHide mark scheme

    Model answer

    A moving bicycle has a kinetic store, a hot drink has a thermal store, and fuel has a chemical store.

    • 1 mark for giving a correct energy store with a matching example
    • 1 mark for giving a second, different energy store with a matching example
    • 1 mark for giving a third, different energy store with a matching example
  2. 2.Explain[3 marks]

    Explain how energy transfers from a torch battery to its surroundings.

    Show mark schemeHide mark scheme

    Model answer

    Energy leaves the battery’s chemical store. Moving charges transfer it electrically to the lamp. Light waves transfer energy to the surroundings, while heating increases thermal stores.

    • 1 mark for identifying the battery’s chemical store as the starting store
    • 1 mark for stating that moving charges transfer energy electrically to the lamp
    • 1 mark for describing transfer to the surroundings by light waves or heating
  3. 3.Calculate[4 marks]

    Calculate the energy gained when 2 kg of a substance warms by 5 °C. Its specific heat capacity is 900 J/kg ∘C−1900\ \mathrm{J/kg\,^{\circ}C^{-1}}900 J/kg∘C−1.

    Show mark schemeHide mark scheme

    Model answer

    Using ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ, the energy gained is 2×900×5=9000 J2\times900\times5=9000\ \mathrm{J}2×900×5=9000 J.

    • 1 mark for using ΔE=mcΔθ\Delta E=mc\Delta\thetaΔE=mcΔθ
    • 1 mark for substituting 2 kg for mass
    • 1 mark for substituting 900 J/kg ∘C−1900\ \mathrm{J/kg\,^{\circ}C^{-1}}900 J/kg∘C−1 and 5 °C correctly
    • 1 mark for calculating 9,000 J
  4. 4.Calculate[3 marks]

    Calculate the kinetic energy of a 4 kg object moving at 5 m/s5\ \mathrm{m/s}5 m/s.

    Show mark schemeHide mark scheme

    Model answer

    Ek=12mv2=12×4×52=50 JE_k=\frac{1}{2}mv^2=\frac{1}{2}\times4\times5^2=50\ \mathrm{J}Ek​=21​mv2=21​×4×52=50 J.

    • 1 mark for using Ek=12mv2E_k=\frac{1}{2}mv^2Ek​=21​mv2
    • 1 mark for substituting 4 kg and 5 m/s5\ \mathrm{m/s}5 m/s and squaring the speed
    • 1 mark for calculating 50 J
  5. 5.Calculate[3 marks]

    Calculate the work done when a 10 N force moves a box 4 m along the force. State what this means for energy.

    Show mark schemeHide mark scheme

    Model answer

    W=Fs=10×4=40 JW=Fs=10\times4=40\ \mathrm{J}W=Fs=10×4=40 J. The force transfers 40 J of energy.

    • 1 mark for using W=FsW=FsW=Fs with distance along the force
    • 1 mark for calculating 40 J
    • 1 mark for stating that 40 J of energy is transferred

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify what is meant by work done on an object.
Show answer and explanation

Answer: D · Worked explanation

Work is done when a force causes an object to move through a distance, and the work done equals the energy transferred. A force acting without movement does not transfer energy by doing work on the object. A change in speed is not essential: work can also transfer energy into other stores, such as thermal stores.
4.

Easy·State[1 mark]

State the equation relating an object's kinetic energy, mass and speed.
Show answer and explanation

Answer: B · Worked explanation

The kinetic energy of an object is given by Ek=12mv2E_k = \frac{1}{2}mv^2Ek​=21​mv2, where mmm is mass and vvv is speed. The speed is squared, and the equation includes a factor of one half. The options without the squared speed, or without the factor of one half, do not give the correct relationship.
5.

Medium·Calculate[2 marks]

Calculate the energy needed to raise the temperature of 0.50 kg0.50\,\text{kg}0.50kg of water by 10 ∘C10\,^{\circ}\text{C}10∘C. The specific heat capacity of water is 4200 J kg−1 ∘C−14200\,\text{J kg}^{-1}\,^{\circ}\text{C}^{-1}4200J kg−1∘C−1.
Show answer and explanation

Answer: B · Worked explanation

Use ΔE=mcΔT\Delta E = mc\Delta TΔE=mcΔT: ΔE=0.50×4200×10=21 000 J\Delta E = 0.50 \times 4200 \times 10 = 21\,000\,\text{J}ΔE=0.50×4200×10=21000J. The tempting value 2100 J2100\,\text{J}2100J results from using a temperature change of 1 ∘C1\,^{\circ}\text{C}1∘C instead of 10 ∘C10\,^{\circ}\text{C}10∘C. The specific heat capacity is the energy needed per kilogram per degree, so both the mass and temperature change must be included.
6.

Medium·Calculate[2 marks]

A trolley of mass 4.0 kg4.0\,\text{kg}4.0kg moves at 3.0 m s−13.0\,\text{m s}^{-1}3.0m s−1. Calculate its kinetic energy.
Show answer and explanation

Answer: B · Worked explanation

Use Ek=12mv2E_k = \frac{1}{2}mv^2Ek​=21​mv2: Ek=12×4.0×(3.0)2=18 JE_k = \frac{1}{2} \times 4.0 \times (3.0)^2 = 18\,\text{J}Ek​=21​×4.0×(3.0)2=18J. The value 12 J12\,\text{J}12J comes from multiplying the mass by the speed without squaring the speed or including the correct relationship. Kinetic energy is measured in joules.
7.

Medium·Calculate[2 marks]

A student pulls a box with a force of 25 N25\,\text{N}25N in the direction of its motion. The box moves 4.0 m4.0\,\text{m}4.0m. Calculate the work done by the pulling force.
Show answer and explanation

Answer: C · Worked explanation

For a force acting in the direction of movement, work done is force multiplied by distance: W=Fs=25×4.0=100 JW = Fs = 25 \times 4.0 = 100\,\text{J}W=Fs=25×4.0=100J. The value 6.25 J6.25\,\text{J}6.25J comes from dividing the force by the distance rather than multiplying. Work done is an energy transfer and is measured in joules.
8.

Medium·Explain[2 marks]

A cyclist brakes to a stop on a level road. Explain what happens to the cyclist’s energy stores as the bicycle slows.
Show answer and explanation

Answer: C · Worked explanation

As the bicycle slows, its kinetic store decreases. Friction in the brakes and between surfaces transfers energy to thermal stores in the brakes and surroundings; the energy does not disappear. The gravitational potential store does not increase appreciably because the road is level, and the brakes do not transfer thermal energy back into the bicycle’s kinetic store.
9.

Medium·Identify[1 mark]

Identify the energy store that increases when an elastic band is stretched.
Show answer and explanation

Answer: A · Worked explanation

Stretching the band transfers energy into its elastic potential store. A chemical store is associated with substances such as fuels and batteries, while a gravitational potential store depends on height in a gravitational field. Nuclear energy is stored in atomic nuclei.
10.

Hard·Determine[2 marks]

A 0.80 kg0.80\,\text{kg}0.80kg metal block has a specific heat capacity of 500 J kg−1 ∘C−1500\,\text{J kg}^{-1}\,^{\circ}\text{C}^{-1}500J kg−1∘C−1. It absorbs 6000 J6000\,\text{J}6000J of energy. Determine its temperature increase.
Show answer and explanation

Answer: A · Worked explanation

Rearrange ΔE=mcΔT\Delta E = mc\Delta TΔE=mcΔT to give ΔT=ΔEmc\Delta T = \frac{\Delta E}{mc}ΔT=mcΔE​. Substituting gives ΔT=60000.80×500=15 ∘C\Delta T = \frac{6000}{0.80 \times 500} = 15\,^{\circ}\text{C}ΔT=0.80×5006000​=15∘C. The tempting value 7.5 ∘C7.5\,^{\circ}\text{C}7.5∘C results from using 0.80 as though it were 1.6 in the denominator; both the block’s mass and specific heat capacity must be multiplied.

Keep going

Next topic6.1.2 Conservation and dissipation of energyPrevious topic5.10.2 Life cycle assessment and recycling

More in Section 6.1 · Physics: Energy

  1. 6.1.1Energy changes in a systemNotes · 10 questions
  2. 6.1.2Conservation and dissipation of energyNotes · 10 questions
  3. 6.1.3Energy resourcesNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/5 read

  1. 1Energy can be held in several different stores
  2. 2Energy moves between stores through transfer pathways
  3. 3Heating a substance raises its thermal energy
  4. 4Kinetic energy increases with mass and squared speed
  5. 5A force transfers energy when it moves an object
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe