Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›5.2 Chemistry: Bonding, structure and properties
  4. ›5.2.2 Bonding and properties

AQA GCSE Combined Science: Trilogy · Section 5.2 · Chemistry: Bonding, structure and properties

5.2.2 Bonding and properties

Explain how bonding and structure affect melting points, boiling points and electrical conductivity.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Ionic lattices need substantial energy to melt
  1. 1Ionic lattices need substantial energy to melt
  2. 2Simple molecules melt without breaking their covalent bonds
  3. 3Giant covalent structures have high melting points
  4. 4Metallic bonding allows metals to conduct electricity
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Ionic lattices need substantial energy to melt

An ionic lattice contains oppositely charged ions arranged in a regular, repeating structure. Strong electrostatic attractions act between these ions in all directions. A large amount of energy is needed to overcome enough attractions for the ions to move freely. Ionic compounds therefore usually have high melting and boiling points.

Solid ionic compounds do not conduct electricity because their ions cannot move through the lattice. When an ionic compound melts or dissolves in water, its ions become free to move. These mobile ions carry electrical charge through the liquid or solution.

Common mistake

Melting does not turn ions into atoms. The ions remain charged, but they can move.

Key terms · tap one for its definition

ionic lattice

An ionic lattice is a regular, repeating arrangement of oppositely charged ions.

electrostatic attractions

Electrostatic attractions are forces between particles with opposite electrical charges.

Part 1 done

2

Part 2 of 4: Simple molecules melt without breaking their covalent bonds

A simple molecule contains a small number of atoms joined by strong covalent bonds. Separate molecules attract each other through intermolecular forces. These forces are much weaker than the covalent bonds within each molecule.

Melting and boiling overcome the forces between molecules. They do not break the covalent bonds within them. Relatively little energy is needed, so simple molecular substances usually have low melting and boiling points. They do not conduct electricity because their molecules have no free-moving charged particles. Many are gases or liquids at room temperature.

Figure 1. Boiling separates molecules. The covalent bonds within each molecule remain intact.

Exam tip

When explaining a low boiling point, name the weak forces between molecules. Do not describe the covalent bonds as weak.

Key terms · tap one for its definition

simple molecule

A simple molecule is a small group of atoms held together by covalent bonds.

intermolecular forces

Intermolecular forces are attractions between separate molecules.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the type of substance that is most likely to have a high melting point because strong electrostatic attractions act throughout a giant lattice.
Show answer and explanation

Answer: C · Worked explanation

Ionic compounds have oppositely charged ions held together by strong electrostatic attractions in a giant lattice, so a large amount of energy is needed to melt them. A simple molecular substance may contain strong covalent bonds within its molecules, but the forces between separate molecules are weak; it is these weaker forces that are overcome during melting.
3

Part 3 of 4: Giant covalent structures have high melting points

A giant covalent structure is a continuous network of atoms joined by covalent bonds. Melting it requires many strong covalent bonds to break. These substances therefore have very high melting points. Their boiling points are also high.

Most giant covalent substances do not conduct electricity because they lack mobile charged particles. Graphite is an exception: it has delocalised electrons that can move and carry charge. Giant covalent substances are generally hard, although graphite is soft because its layers can slide over each other. These differences show why the arrangement of particles matters alongside the type of bond.

Key terms · tap one for its definition

giant covalent structure

A giant covalent structure is a continuous network of atoms joined by covalent bonds.

delocalised electrons

Delocalised electrons are electrons that can move through a structure rather than belonging to one bond.

Part 3 done

4

Part 4 of 4: Metallic bonding allows metals to conduct electricity

Metals contain positive ions surrounded by delocalised electrons. Metallic bonding is the strong attraction between these ions and electrons. Metals generally have high melting and boiling points because overcoming this attraction takes energy. Their electrons can move through the solid, so metals conduct electricity without melting.

Metals are usually malleable: layers of ions can slide while the attraction to electrons remains. By contrast, shifting layers in an ionic crystal brings like charges together. Their repulsion can make the crystal break. Simple molecular substances have lower melting points than either metals or ionic compounds because only intermolecular forces are overcome.

Exam tip

For conductivity, identify the charged particle and explain whether it can move.

Key terms · tap one for its definition

metallic bonding

Metallic bonding is the attraction between positive metal ions and delocalised electrons.

malleable

A malleable material can be shaped without breaking.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why ionic compounds usually have high melting points.

    Show mark schemeHide mark scheme

    Model answer

    Oppositely charged ions have strong electrostatic attractions in the lattice. Much energy is needed to overcome enough attractions for the ions to move.

    • 1 mark for identifying strong electrostatic attractions between oppositely charged ions
    • 1 mark for explaining that much energy is needed to overcome enough of these attractions
  2. 2.Explain[3 marks]

    Explain why an ionic compound conducts electricity when molten but not when solid.

    Show mark schemeHide mark scheme

    Model answer

    Its ions carry electrical charge. In the solid lattice, they cannot move. When molten, the ions are free to move and carry charge through the liquid.

    • 1 mark for identifying ions as charged particles that carry charge
    • 1 mark for stating that ions cannot move through the solid lattice
    • 1 mark for stating that ions can move when the compound is molten
  3. 3.Explain[3 marks]

    Explain why simple molecular substances usually have low boiling points.

    Show mark schemeHide mark scheme

    Model answer

    The forces between separate molecules are weak. Boiling overcomes these intermolecular forces, so relatively little energy is needed. The covalent bonds within molecules remain intact.

    • 1 mark for identifying weak intermolecular forces between molecules
    • 1 mark for explaining that relatively little energy is needed to overcome these forces
    • 1 mark for stating that covalent bonds within molecules are not broken
  4. 4.Compare[3 marks]

    Compare electrical conductivity in solid metals, solid ionic compounds and simple molecular substances.

    Show mark schemeHide mark scheme

    Model answer

    Solid metals conduct because delocalised electrons can move. Solid ionic compounds do not conduct because their ions cannot move. Simple molecular substances do not conduct because they lack free-moving charged particles.

    • 1 mark for stating that metals conduct because delocalised electrons can move
    • 1 mark for stating that solid ionic compounds do not conduct because their ions cannot move
    • 1 mark for stating that simple molecular substances lack free-moving charged particles
  5. 5.Explain[3 marks]

    Explain why giant covalent structures usually have very high melting points and why graphite conducts electricity.

    Show mark schemeHide mark scheme

    Model answer

    Giant covalent structures contain many strong covalent bonds. Melting requires many of these bonds to break, needing much energy. Graphite conducts because it has delocalised electrons that can move.

    • 1 mark for identifying many strong covalent bonds in a giant covalent structure
    • 1 mark for explaining that melting requires many bonds to break, needing much energy
    • 1 mark for explaining that graphite has mobile delocalised electrons that carry charge

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State why an ionic compound can conduct electricity when it is molten.
Show answer and explanation

Answer: A · Worked explanation

When an ionic compound melts, its ions are no longer held in fixed positions in the lattice. The mobile positive and negative ions can move through the liquid and carry charge. Electrons are not the charge carriers in an ionic melt; the ions themselves move.
3.

Easy·Identify[1 mark]

Identify the characteristic that explains why metals can conduct electricity as solids.
Show answer and explanation

Answer: A · Worked explanation

Metals contain delocalised electrons that are free to move through the solid structure and carry electrical charge. The positive metal ions remain in fixed positions in the lattice, so their movement does not explain electrical conduction in a solid metal.
4.

Easy·Explain[1 mark]

Explain why a simple molecular substance often has a low boiling point.
Show answer and explanation

Answer: C · Worked explanation

Boiling a simple molecular substance separates its molecules, so the forces between molecules need to be overcome. These forces are relatively weak and require little energy, giving the substance a low boiling point. The covalent bonds within the molecules are not broken during boiling.
5.

Medium·Determine[2 marks]

A solid melts at 780 °C780\,\text{°C}780°C and does not conduct electricity as a solid, but its molten form conducts. Determine which bonding model best accounts for these observations.
Show answer and explanation

Answer: D · Worked explanation

A high melting point is consistent with strong attractions in a giant ionic lattice, and the solid does not conduct because its ions are fixed in place. When molten, the ions can move and carry charge. A metal would usually conduct as a solid, while simple molecular substances generally have much lower melting points.
6.

Medium·Compare[2 marks]

Compare a solid ionic compound with a solid metal in terms of their ability to conduct electricity.
Show answer and explanation

Answer: C · Worked explanation

A solid metal conducts because it contains delocalised electrons that can move through its structure. In a solid ionic compound, the ions are held in fixed positions, so they cannot carry charge through the solid. The tempting idea that both conduct because they contain charged particles overlooks whether those particles are actually mobile.
7.

Medium·Identify[2 marks]

A substance is a solid at room temperature, conducts electricity as a solid, and can be shaped by hammering. Identify the structure that best fits these properties.
Show answer and explanation

Answer: B · Worked explanation

Metals conduct as solids because delocalised electrons can move, and their layers of ions can slide while the metallic bonding remains. This makes metals malleable. The suggestion of mobile ions in a solid ionic lattice is tempting, but the ions are fixed in place in the solid state.
8.

Medium·Deduce[2 marks]

A student tests a solid salt and then a solution made by dissolving the same salt in water. The solid does not conduct, but the solution does. Deduce the reason for the difference.
Show answer and explanation

Answer: B · Worked explanation

The salt contains ions in both states, but their mobility changes. In the solid, the ions are fixed in the lattice; in solution, they can move and carry charge. Dissolving does not create the ions from uncharged particles, and electrical conduction is not caused by water molecules becoming metal atoms.
9.

Medium·Explain[2 marks]

Substance P is a simple molecular liquid with a boiling point of 35 °C35\,\text{°C}35°C. Substance Q is an ionic solid with a melting point of 720 °C720\,\text{°C}720°C. Explain the difference in the energy needed for these changes of state.
Show answer and explanation

Answer: D · Worked explanation

Boiling P involves overcoming weak forces between its molecules, so relatively little energy is needed. Melting Q requires overcoming strong electrostatic attractions between oppositely charged ions in its lattice, so much more energy is needed. The covalent bonds within P's molecules are not broken when P boils.
10.

Hard·Deduce[2 marks]

Two substances consist of small covalent molecules. Substance R boils at 18 °C18\,\text{°C}18°C, while substance S boils at 96 °C96\,\text{°C}96°C. Deduce what the boiling points alone suggest about the forces between their molecules.
Show answer and explanation

Answer: A · Worked explanation

A higher boiling point means more energy is needed to separate the molecules, suggesting stronger forces between S's molecules than between R's. Boiling point alone does not show that S has stronger covalent bonds within its molecules: those bonds are not broken when a simple molecular substance boils.

Keep going

Next topic5.2.3 Structure and bonding of carbonPrevious topic5.2.1 Ionic, covalent and metallic bonding

More in Section 5.2 · Chemistry: Bonding, structure and properties

  1. 5.2.1Ionic, covalent and metallic bondingNotes · 10 questions
  2. 5.2.2Bonding and propertiesNotes · 10 questions
  3. 5.2.3Structure and bonding of carbonNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Ionic lattices need substantial energy to melt
  2. 2Simple molecules melt without breaking their covalent bonds
  3. 3Giant covalent structures have high melting points
  4. 4Metallic bonding allows metals to conduct electricity
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe