Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›5.2 Chemistry: Bonding, structure and properties
  4. ›5.2.3 Structure and bonding of carbon

AQA GCSE Combined Science: Trilogy · Section 5.2 · Chemistry: Bonding, structure and properties

5.2.3 Structure and bonding of carbon

Explain how carbon structures affect their properties and compare their uses.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Diamond is hard because its carbon atoms bond throughout
  1. 1Diamond is hard because its carbon atoms bond throughout
  2. 2Graphite conducts electricity and its layers slide apart
  3. 3Graphene combines a thin sheet with useful strength
  4. 4Fullerenes form hollow carbon shapes with useful surfaces
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Diamond is hard because its carbon atoms bond throughout

Diamond has a giant covalent structure. Each carbon atom forms four covalent bonds with other carbon atoms. These bonds extend throughout a three-dimensional network. The bonds are strong, so diamond is very hard and has a high melting point. Its hardness makes it useful for cutting tools.

Diamond does not conduct electricity. All four outer electrons from each carbon atom take part in bonds. There are no delocalised electrons free to move through the structure.

Common mistake

Diamond is not one small molecule. Its bonded network extends throughout the whole crystal.

Key terms · tap one for its definition

giant covalent structure

A giant covalent structure is a network of atoms joined by covalent bonds throughout the structure.

delocalised electrons

Delocalised electrons can move through a structure rather than remaining in individual covalent bonds.

Part 1 done

2

Part 2 of 4: Graphite conducts electricity and its layers slide apart

Graphite also has a giant covalent structure. Each carbon atom forms three covalent bonds within a flat layer. The atoms form a repeating pattern of hexagons. Its fourth outer electron is delocalised. These electrons can move along the layers, so graphite conducts electricity.

Strong bonds within each layer give graphite a high melting point. The layers are held together by weak forces. They can slide over one another, making graphite soft and slippery. Graphite can therefore act as a lubricant.

Figure 1. Diamond bonds extend in three dimensions. Graphite has stacked sheets that can slide.

Exam tip

Link graphite’s conductivity to moving delocalised electrons, not to moving carbon atoms.

Key terms · tap one for its definition

layers

Layers are flat sheets of bonded carbon atoms stacked on top of one another in graphite.

lubricant

A lubricant reduces friction between surfaces that move against each other.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the bonding arrangement in diamond.
Show answer and explanation

Answer: B · Worked explanation

In diamond, each carbon atom is covalently bonded to four other carbon atoms, forming a giant three-dimensional structure. The option describing three bonds in layers refers to graphite, not diamond; graphite has a different structure and an electron that can move through its layers.
3

Part 3 of 4: Graphene combines a thin sheet with useful strength

Graphene is a single layer of graphite, just one carbon atom thick. Each carbon atom bonds to three others in a hexagonal pattern. Strong covalent bonds make the sheet strong despite its small thickness. Delocalised electrons allow graphene to conduct electricity. It is also very light and flexible.

Diamond, graphite and graphene contain only carbon, but their arrangements differ. Their bonding explains their contrasting properties.

How three carbon structures compare

StructureCarbon bonds per atomElectrical conductionMechanical property
DiamondFourDoes not conductVery hard
GraphiteThreeConducts along layersLayers slide; soft
GrapheneThreeConducts along sheetStrong, thin and flexible
Structure
Diamond
Carbon bonds per atom
Four
Electrical conduction
Does not conduct
Mechanical property
Very hard
Structure
Graphite
Carbon bonds per atom
Three
Electrical conduction
Conducts along layers
Mechanical property
Layers slide; soft
Structure
Graphene
Carbon bonds per atom
Three
Electrical conduction
Conducts along sheet
Mechanical property
Strong, thin and flexible

Graphene is being investigated for electronics and strong, lightweight materials. Its properties come from a single bonded sheet, not from stacked layers.

Key term

Graphene

Graphene is a single layer of carbon atoms bonded in a repeating hexagonal pattern.

Part 3 done

4

Part 4 of 4: Fullerenes form hollow carbon shapes with useful surfaces

Unlike graphene’s flat sheet, fullerenes form hollow carbon shapes. Their carbon atoms form rings of six, sometimes alongside rings of five or seven. Buckminsterfullerene, C60\text{C}_{60}C60​, was the first fullerene discovered. Its 60 carbon atoms form a roughly spherical cage. Other fullerenes form long cylinders called carbon nanotubes.

Spherical fullerenes can hold other molecules inside their cages. This makes them useful in research into drug delivery. Their large surface area relative to their volume can also support catalysts. Carbon nanotubes are strong for their mass. They can reinforce materials without adding much weight. They conduct electricity, so they could be used in tiny electronic circuits.

Common mistake

Graphene is a flat sheet. A carbon nanotube is a hollow cylinder of bonded carbon atoms.

Key terms · tap one for its definition

Fullerenes

Fullerenes are carbon structures with atoms arranged in hollow shapes, such as cages or tubes.

carbon nanotubes

Carbon nanotubes are long, hollow cylindrical fullerenes made from bonded carbon atoms.

Note read

Check your recall[16 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe the bonding around each carbon atom in diamond.

    Show mark schemeHide mark scheme

    Model answer

    Each carbon atom forms four covalent bonds with other carbon atoms in a three-dimensional network.

    • 1 mark for stating that each carbon atom forms four covalent bonds
    • 1 mark for describing a three-dimensional network extending throughout diamond
  2. 2.Explain[3 marks]

    Explain why diamond is hard but does not conduct electricity.

    Show mark schemeHide mark scheme

    Model answer

    Strong covalent bonds extend throughout diamond, making it hard. All four outer electrons form bonds, leaving no delocalised electrons to carry charge.

    • 1 mark for linking hardness to strong covalent bonds throughout the structure
    • 1 mark for stating that all four outer electrons of each carbon atom take part in bonds
    • 1 mark for stating that there are no delocalised electrons to carry charge
  3. 3.Explain[4 marks]

    Explain why graphite conducts electricity and can act as a lubricant.

    Show mark schemeHide mark scheme

    Model answer

    Each carbon atom bonds to three others, leaving one outer electron delocalised. These electrons move along the layers and carry charge. Weak forces between the layers allow them to slide, reducing friction.

    • 1 mark for stating that each carbon atom forms three covalent bonds
    • 1 mark for identifying delocalised electrons that move along the layers and carry charge
    • 1 mark for identifying weak forces between the layers
    • 1 mark for linking sliding layers to reduced friction
  4. 4.Compare[3 marks]

    Compare the structure and electrical conduction of diamond and graphene.

    Show mark schemeHide mark scheme

    Model answer

    Diamond is a three-dimensional network with four bonds per carbon atom. Graphene is one sheet with three bonds per carbon atom. Diamond does not conduct electricity, whereas graphene does.

    • 1 mark for describing diamond as a three-dimensional network
    • 1 mark for describing graphene as a single sheet with three bonds per carbon atom
    • 1 mark for stating that graphene conducts electricity but diamond does not
  5. 5.Explain[4 marks]

    Explain two possible uses of fullerenes using their properties.

    Show mark schemeHide mark scheme

    Model answer

    Spherical fullerenes can hold molecules inside, making them useful in drug-delivery research. Carbon nanotubes are strong for their mass, so they can reinforce lightweight materials.

    • 1 mark for stating that spherical fullerenes can hold molecules inside their cages
    • 1 mark for linking this property to drug-delivery research
    • 1 mark for stating that carbon nanotubes are strong compared with their mass
    • 1 mark for linking this property to reinforcing lightweight materials

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State why graphite can conduct electricity.
Show answer and explanation

Answer: A · Worked explanation

Each carbon atom in graphite forms three covalent bonds, leaving one electron per atom delocalised. These electrons can move through the structure and carry electrical charge. The fact that graphite's layers can slide explains why it is soft, but sliding layers is not the reason it conducts electricity.
3.

Easy·Identify[1 mark]

Which description best identifies a fullerene?
Show answer and explanation

Answer: D · Worked explanation

Fullerenes are forms of carbon in which the atoms make hollow structures, including cage-shaped molecules and cylindrical nanotubes. A giant three-dimensional network describes diamond, while flat stacked layers describe graphite. Fullerenes contain carbon atoms only, so they are not compounds of carbon and another element.
4.

Easy·Identify[1 mark]

Identify the form of carbon that consists of a single layer of atoms arranged in a hexagonal pattern.
Show answer and explanation

Answer: C · Worked explanation

Graphene is a single layer of carbon atoms arranged in a hexagonal pattern. Graphite consists of many such layers, while diamond has a three-dimensional bonding structure. A carbon nanotube is a hollow cylindrical fullerene, rather than a flat single layer.
5.

Medium·Explain[2 marks]

A diamond crystal is used in a cutting tool. Explain why diamond is suitable for this use.
Show answer and explanation

Answer: B · Worked explanation

Each carbon atom in diamond is strongly covalently bonded to four others, creating a rigid giant structure. Many strong bonds must be overcome to change its shape, so diamond is very hard and suitable for cutting. The sliding-layer explanation applies to graphite, which is soft rather than hard.
6.

Medium·Deduce[2 marks]

A solid sample of carbon has a layered structure, and the layers can slide over one another. Deduce which form it is and explain one likely use based on this property.
Show answer and explanation

Answer: B · Worked explanation

The description matches graphite, whose carbon atoms are covalently bonded in layers with weak forces between the layers. Those weak forces let the layers slide, so graphite can act as a lubricant. Diamond does not have layers that slide, and graphene is a single layer rather than a stack.
7.

Medium·Suggest[2 marks]

A researcher wants to use a carbon structure to make a very small cylindrical tube that is strong for its size. Suggest which type of structure is most suitable and why.
Show answer and explanation

Answer: C · Worked explanation

A carbon nanotube is a cylindrical fullerene made from carbon atoms joined by strong covalent bonds, making it suitable where a very small, strong tube is needed. Graphite has layers but does not consist of hollow tubes, and graphene is a flat sheet. Diamond is a three-dimensional network, not a cylindrical structure.
8.

Medium·Compare[2 marks]

Compare the electrical conductivity of graphite and diamond.
Show answer and explanation

Answer: D · Worked explanation

In graphite, each carbon atom forms three covalent bonds, leaving an electron delocalised and able to carry charge. In diamond, each carbon atom forms four covalent bonds, so there are no delocalised electrons available to move. The claim that both conduct overlooks this difference in the number of bonds formed by each carbon atom.
9.

Hard·Explain[2 marks]

A student says, “Diamond is hard because each carbon atom has more covalent bonds than an atom in graphite.” Explain whether this reasoning is complete, linking the structure and bonding to the difference in hardness.
Show answer and explanation

Answer: A · Worked explanation

The reasoning is valid: each diamond carbon forms four covalent bonds, producing a rigid three-dimensional network, whereas each graphite carbon forms three bonds within layers. The weak forces between graphite's layers allow them to slide, making graphite soft. The tempting alternative reverses the structures and bonding arrangements of diamond and graphite.
10.

Hard·Deduce[2 marks]

A proposed carbon material has hollow cylindrical molecules, and testing shows that it can conduct electricity. Deduce the most likely structure and a use that fits its shape and properties.
Show answer and explanation

Answer: A · Worked explanation

Hollow cylindrical molecules identify carbon nanotubes, a type of fullerene. Their shape and ability to conduct electricity make them potentially useful in tiny wires or electrical components. Diamond is not hollow or electrically conducting, and graphite and graphene are layered or sheet-like structures rather than cylindrical molecules.

Keep going

Next topic5.3.1 Conservation of mass and equationsPrevious topic5.2.2 Bonding and properties

More in Section 5.2 · Chemistry: Bonding, structure and properties

  1. 5.2.1Ionic, covalent and metallic bondingNotes · 10 questions
  2. 5.2.2Bonding and propertiesNotes · 10 questions
  3. 5.2.3Structure and bonding of carbonNotes · 10 questions

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Diamond is hard because its carbon atoms bond throughout
  2. 2Graphite conducts electricity and its layers slide apart
  3. 3Graphene combines a thin sheet with useful strength
  4. 4Fullerenes form hollow carbon shapes with useful surfaces
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe