Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.5 Physics: Forces
  4. ›6.5.2 Work done and energy transfer

AQA GCSE Combined Science: Trilogy · Section 6.5 · Physics: Forces

6.5.2 Work done and energy transfer

Calculate work done and explain how forces transfer energy between stores.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A force does work when an object moves along its line of action
  1. 1A force does work when an object moves along its line of action
  2. 2The work equation gives energy transferred in joules
  3. 3Doing work transfers energy between stores
  4. 4Friction transfers energy to thermal energy stores
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A force does work when an object moves along its line of action

Work done is the energy transferred when a force moves an object. To calculate it, multiply the force by the distance moved in the force’s direction: W=FsW=FsW=Fs. Here, WWW is work done in joules, FFF is force in newtons, and sss is distance in metres.

One joule of work is done when a force of one newton moves an object one metre in its direction. A force does no work on an object if the object does not move. If movement is not in the force’s direction, use only the distance moved in that direction.

Common mistake

Holding a stationary bag takes effort, but your lifting force does no work on the bag. It has not moved.

Key terms · tap one for its definition

Work done

Work done is the energy transferred when a force moves an object through a distance in the force’s direction.

distance moved in the force’s direction

This is the part of an object’s movement measured along the direction in which the force acts.

joule

The joule (J) is the unit of work done and energy transferred.

Part 1 done

2

Part 2 of 4: The work equation gives energy transferred in joules

Work done and energy transferred have the same unit: the joule, written J. Use force in newtons (N) and distance in metres (m). This gives work done in joules. Convert centimetres to metres before substituting values. The equation applies to the distance moved in the force’s direction, not necessarily the whole route travelled.

Worked example

Calculating work done

A person pushes a box with a force of 40 N. The box moves 3 m in the force’s direction. Calculate the work done.
  1. 1
    Write the equation: W=FsW=FsW=Fs.
  2. 2
    Substitute the values: W=40 N×3 mW=40\,\mathrm{N}\times3\,\mathrm{m}W=40N×3m.
  3. 3
    Calculate: W=120 JW=120\,\mathrm{J}W=120J.

Answer: The work done is 120 J.

Exam tip

State the equation, substitute values with units, and give the answer in joules.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate the work done when a force of 12 N12\,\text{N}12N moves an object 3 m3\,\text{m}3m in the direction of the force.
Show answer and explanation

Answer: D · Worked explanation

Work done is force multiplied by distance moved in the direction of the force: W=Fd=12 N×3 m=36 JW = Fd = 12\,\text{N} \times 3\,\text{m} = 36\,\text{J}W=Fd=12N×3m=36J. The tempting answer 15 J15\,\text{J}15J comes from adding the force and distance, but these quantities must be multiplied.
3

Part 3 of 4: Doing work transfers energy between stores

When a person lifts a bag, their muscles exert an upward force while the bag rises. Energy is transferred from the person’s chemical energy store to the bag’s gravitational potential energy store. The person does work against gravity.

When a force speeds up a trolley, energy is transferred to its kinetic energy store. In both cases, doing work describes how energy is transferred. The energy is held in stores, not held as work. Energy may also be transferred to the surroundings, particularly when friction acts. These transfers do not create energy; they move it between stores.

Figure 1. The lifting force transfers energy as the bag rises. Its gravitational potential energy store increases.

Key terms · tap one for its definition

chemical energy store

A chemical energy store is energy associated with chemical substances, such as those used by muscles.

gravitational potential energy store

A gravitational potential energy store increases when an object is raised in a gravitational field.

kinetic energy store

A kinetic energy store is the energy an object has because it is moving.

Part 3 done

4

Part 4 of 4: Friction transfers energy to thermal energy stores

Friction is a force that opposes movement between surfaces. It does work when surfaces move past each other. For example, a sliding box slows down as friction acts on it. Energy is transferred from the box’s kinetic energy store to the thermal energy stores of the box and floor. Their temperatures may rise.

Brakes provide another example. Friction between brake parts opposes the motion of a vehicle. The vehicle’s kinetic energy store decreases, while the thermal energy stores of the brakes and surroundings increase. Work done by friction is still measured in joules. The magnitude of friction and the distance moved along its line of action determine the magnitude of the work done.

Key terms · tap one for its definition

Friction

Friction is a force that opposes movement between surfaces in contact.

thermal energy stores

Thermal energy stores are energy associated with the temperatures of objects or their surroundings.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the unit of work done and the unit of energy transferred.

    Show mark schemeHide mark scheme

    Model answer

    Both work done and energy transferred are measured in joules (J).

    • 1 mark for stating that work done is measured in joules
    • 1 mark for stating that energy transferred is measured in joules
  2. 2.Calculate[3 marks]

    Calculate the work done when a 25 N force moves an object 4 m in the force’s direction.

    Show mark schemeHide mark scheme

    Model answer

    Using W=FsW=FsW=Fs, the work done is 25 N×4 m=100 J25\,\mathrm{N}\times4\,\mathrm{m}=100\,\mathrm{J}25N×4m=100J.

    • 1 mark for using W=FsW=FsW=Fs
    • 1 mark for substituting 25 N and 4 m correctly
    • 1 mark for calculating 100 J
  3. 3.Explain[3 marks]

    Explain the energy transfer when a person lifts a bag higher.

    Show mark schemeHide mark scheme

    Model answer

    The person does work by exerting an upward force as the bag rises. Energy transfers from the person’s chemical energy store to the bag’s gravitational potential energy store.

    • 1 mark for stating that the person’s force does work as the bag moves upwards
    • 1 mark for identifying the person’s chemical energy store as the starting store
    • 1 mark for identifying the bag’s gravitational potential energy store as the receiving store
  4. 4.Explain[3 marks]

    Explain why a sliding box slows down when friction acts.

    Show mark schemeHide mark scheme

    Model answer

    Friction opposes the box’s movement and does work on it. Energy transfers from the box’s kinetic energy store to the thermal energy stores of the box and floor.

    • 1 mark for stating that friction opposes the box’s movement and does work
    • 1 mark for stating that the box’s kinetic energy store decreases
    • 1 mark for stating that energy transfers to the thermal energy stores of the box and floor
  5. 5.Explain[2 marks]

    Explain why an upward force does no work on a bag held stationary.

    Show mark schemeHide mark scheme

    Model answer

    The bag does not move. Its distance moved in the force’s direction is zero, so no work is done on it by that force.

    • 1 mark for stating that the bag does not move
    • 1 mark for linking zero distance moved in the force’s direction to zero work done

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Identify what happens when work is done on an object.
Show answer and explanation

Answer: B · Worked explanation

Doing work transfers energy between stores, such as from a person's chemical store to an object's kinetic store. The object does not have to become warmer, and its mass is not transferred; a force also need not become zero after work has been done.
3.

Easy·Identify[1 mark]

Which situation involves energy being transferred by doing work?
Show answer and explanation

Answer: B · Worked explanation

The person applies a force to the box and moves it, so work is done and energy is transferred from the person's chemical store. The lamp and cooling drink involve energy transfers but do not describe work being done by a force moving an object; the unused battery is not transferring energy in this situation.
4.

Easy·State[1 mark]

State the correct unit for work done.
Show answer and explanation

Answer: B · Worked explanation

Work done is measured in joules, with the symbol J\text{J}J. A newton measures force, a metre measures distance, and a watt measures power, so none of those is the unit of work done.
5.

Medium·Calculate[1 mark]

A student pulls a suitcase with a force of 25 N25\,\text{N}25N for 8 m8\,\text{m}8m in the direction of the force. Calculate the work done on the suitcase.
Show answer and explanation

Answer: C · Worked explanation

Use W=FdW = FdW=Fd: 25 N×8 m=200 N m25\,\text{N} \times 8\,\text{m} = 200\,\text{N m}25N×8m=200N m, which is 200 J200\,\text{J}200J. The answer 33 J33\,\text{J}33J results from adding the force and distance rather than multiplying them.
6.

Medium·Explain[2 marks]

A worker lifts a toolbox from the floor onto a shelf. Explain the energy transfer that occurs while the toolbox is being lifted.
Show answer and explanation

Answer: B · Worked explanation

The worker applies an upward force and moves the toolbox upwards, so work is done and energy is transferred from the worker's chemical store to the toolbox's gravitational potential store. The toolbox's mass does not increase, and once it is resting on the shelf its kinetic store is not increased.
7.

Medium·Compare[2 marks]

A person pushes a trolley forwards while it rolls forwards, then pushes against a locked door that does not move. Compare the energy transfer by work in the two situations.
Show answer and explanation

Answer: A · Worked explanation

For the trolley, the applied force acts while the trolley moves forwards, so work is done and energy is transferred. The locked door has no distance moved, so no work is done on it despite the force; the claim that any applied force alone means work is done misses the need for movement.
8.

Medium·Determine[1 mark]

Determine the unit equivalent to a joule, given that work done is calculated using force in newtons and distance in metres.
Show answer and explanation

Answer: C · Worked explanation

Since W=FdW = FdW=Fd, the unit of work is the unit of force multiplied by the unit of distance: N×m=N m\text{N} \times \text{m} = \text{N m}N×m=N m. This is equivalent to a joule; dividing newtons by metres would not match the work equation.
9.

Medium·Calculate[2 marks]

A force of 40 N40\,\text{N}40N moves a crate 0.5 m0.5\,\text{m}0.5m in the direction of the force. Calculate the work done on the crate.
Show answer and explanation

Answer: D · Worked explanation

Work done is W=Fd=40 N×0.5 m=20 N m=20 JW = Fd = 40\,\text{N} \times 0.5\,\text{m} = 20\,\text{N m} = 20\,\text{J}W=Fd=40N×0.5m=20N m=20J. The answer 80 J80\,\text{J}80J would result from dividing by 0.5 rather than multiplying by the distance.
10.

Medium·Identify[1 mark]

Identify the situation in which a force does work on an object.
Show answer and explanation

Answer: D · Worked explanation

The magnet exerts a force and the metal object moves, so energy is transferred by work. Holding a bag or pressing a stationary wall involves a force but no movement, and a book resting on a desk is not moving either.

Keep going

Next topic6.5.3 Forces and elasticityPrevious topic6.5.1 Forces and their interactions

More in Section 6.5 · Physics: Forces

  1. 6.5.1Forces and their interactionsNotes · 10 questions
  2. 6.5.2Work done and energy transferNotes · 10 questions
  3. 6.5.3Forces and elasticityNotes · 10 questions
  4. 6.5.4Forces and motionNotes · 10 questions
  5. 6.5.5MomentumNotes · 10 questions· Higher tier

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1A force does work when an object moves along its line of action
  2. 2The work equation gives energy transferred in joules
  3. 3Doing work transfers energy between stores
  4. 4Friction transfers energy to thermal energy stores
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe