Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AQA GCSE Combined Science: Trilogy
  3. ›6.5 Physics: Forces
  4. ›6.5.3 Forces and elasticity

AQA GCSE Combined Science: Trilogy · Section 6.5 · Physics: Forces

6.5.3 Forces and elasticity

Explain how forces deform objects, calculate spring forces, and interpret extension graphs.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Forces can change an object’s shape
  1. 1Forces can change an object’s shape
  2. 2Spring extension is proportional to force within a limit
  3. 3The spring constant gives the required force
  4. 4Extension graphs show proportionality and permanent changes
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Forces can change an object’s shape

A force can stretch an object, making it longer. It can also compress an object, making it shorter. Both changes are forms of deformation. A spring stretches when pulled and compresses when pushed. The size of the change depends on the force and the material.

An elastic deformation is reversed when the force is removed. The object returns to its original shape. If it stays changed after the force is removed, the deformation is inelastic. A spring can behave elastically under smaller forces but remain stretched after a larger force.

Common mistake

Elastic does not mean easy to stretch. It means the object returns to its original shape.

Key terms · tap one for its definition

stretch

To stretch an object is to increase its length by applying a force.

compress

To compress an object is to decrease its length by applying a force.

elastic deformation

Elastic deformation is a change in shape that reverses when the force is removed.

Part 1 done

2

Part 2 of 4: Spring extension is proportional to force within a limit

A spring’s extension is its stretched length minus its original length. For many springs, extension is directly proportional to the applied force. Doubling the force doubles the extension. This relationship holds only up to the limit of proportionality. Beyond this point, the graph stops being a straight line.

Within the proportional region, F=keF=keF=ke. Here, FFF is force in newtons and eee is extension in metres. The spring constant kkk is in newtons per metre. A larger spring constant means more force is needed for the same extension. The equation also applies to compression within the proportional region. Use the magnitude of the compression in place of eee.

Exam tip

Calculate extension from two lengths before using F=keF=keF=ke. Convert centimetres to metres if kkk is in newtons per metre.

Key terms · tap one for its definition

extension

Extension is the increase in length from an object’s original length.

limit of proportionality

The limit of proportionality is the point beyond which force and extension are no longer directly proportional.

spring constant

The spring constant is the force needed per unit extension within a spring’s proportional region.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the change that occurs when a pulling force stretches a spring.
Show answer and explanation

Answer: D · Worked explanation

A stretching force pulls the ends of the spring apart, increasing its length. The change in length is its extension. A spring’s mass does not increase simply because it is stretched, and neither a decrease in length nor a particular temperature change describes the effect of stretching.
3

Part 3 of 4: The spring constant gives the required force

Use F=keF=keF=ke when the spring is within its proportional region. The spring constant describes how much force produces a given extension. You can also find it from k=F/ek=F/ek=F/e. On a force–extension graph with force on the vertical axis, the straight section’s gradient equals kkk.

Worked example

Calculate a stretching force

A spring has a spring constant of 25 N/m25\,\mathrm{N/m}25N/m. What force stretches it by 8 cm?
  1. 1
    Convert the extension: e=8 cm=0.08 me=8\,\mathrm{cm}=0.08\,\mathrm{m}e=8cm=0.08m.
  2. 2
    Substitute into F=keF=keF=ke: F=25 N/m×0.08 mF=25\,\mathrm{N/m}\times0.08\,\mathrm{m}F=25N/m×0.08m.
  3. 3
    Calculate the force: F=2 NF=2\,\mathrm{N}F=2N.

Answer: The required force is 2 N2\,\mathrm{N}2N.

Check that the extension is within the proportional region before using this calculation. Outside that region, the same value of kkk does not describe the whole graph.

Part 3 done

4

Part 4 of 4: Extension graphs show proportionality and permanent changes

A force–extension graph plots applied force against extension. A straight line through the origin shows direct proportionality. If the line curves, equal increases in force no longer produce equal increases in extension. The point where it first curves marks the limit of proportionality.

A curved loading graph alone does not prove permanent deformation. Remove the force to test whether the object recovers. If the unloading path returns to the origin, the deformation was elastic. If it reaches zero force at a positive extension, the object has permanent deformation. That remaining extension shows how much longer it is than before.

Figure 1. The loading line stops being straight beyond the limit of proportionality. The unloading path ends at a positive extension.

Common mistake

Passing the limit of proportionality does not necessarily mean permanent deformation. Check the unloading path.

Key terms · tap one for its definition

force–extension graph

A force–extension graph shows how the applied force varies with an object’s extension.

permanent deformation

Permanent deformation is a change in shape that remains after the force is removed.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[2 marks]

    Describe what happens when a spring is stretched elastically and the force is removed.

    Show mark schemeHide mark scheme

    Model answer

    The spring becomes longer while the force acts. It returns to its original length when the force is removed.

    • 1 mark for stating that the spring becomes longer under the force
    • 1 mark for stating that it returns to its original length when the force is removed
  2. 2.Explain[3 marks]

    Explain how force and extension are related below a spring’s limit of proportionality.

    Show mark schemeHide mark scheme

    Model answer

    Force and extension are directly proportional below the limit. Doubling the force doubles the extension. A force–extension graph is a straight line through the origin.

    • 1 mark for stating that force and extension are directly proportional
    • 1 mark for stating that doubling the force doubles the extension
    • 1 mark for describing a straight-line force–extension graph through the origin
  3. 3.Calculate[3 marks]

    Calculate the force needed to compress a spring by 4 cm if its spring constant is 50 N/m50\,\mathrm{N/m}50N/m. Assume it remains proportional.

    Show mark schemeHide mark scheme

    Model answer

    The compression is 0.04 m0.04\,\mathrm{m}0.04m. Using F=keF=keF=ke, the force is 50 N/m×0.04 m=2 N50\,\mathrm{N/m}\times0.04\,\mathrm{m}=2\,\mathrm{N}50N/m×0.04m=2N.

    • 1 mark for converting 4 cm to 0.04 m0.04\,\mathrm{m}0.04m
    • 1 mark for substituting into F=keF=keF=ke
    • 1 mark for calculating a force of 2 N2\,\mathrm{N}2N
  4. 4.Explain[3 marks]

    Explain how unloading data show whether a stretched material has undergone permanent deformation.

    Show mark schemeHide mark scheme

    Model answer

    Plot force against extension while removing the force. If the unloading path returns to the origin, deformation was elastic. If zero force occurs at a positive extension, permanent deformation remains.

    • 1 mark for considering the force–extension path while the force is removed
    • 1 mark for identifying a return to the origin as elastic recovery
    • 1 mark for identifying positive extension at zero force as permanent deformation
  5. 5.Explain[2 marks]

    Explain why a curved loading graph does not, by itself, prove permanent deformation.

    Show mark schemeHide mark scheme

    Model answer

    A curve shows that force and extension are no longer proportional. The material may still return to its original length when unloaded.

    • 1 mark for stating that the curve shows force and extension are no longer proportional
    • 1 mark for stating that the material may still recover its original length

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the relationship between force and extension for a spring when it obeys Hooke’s law.
Show answer and explanation

Answer: A · Worked explanation

When a spring obeys Hooke’s law, its extension is directly proportional to the applied force, provided the limit of proportionality has not been exceeded. This means that doubling the force doubles the extension. An inverse or squared relationship would not produce this proportional change.
3.

Easy·Calculate[1 mark]

Calculate the force needed to extend a spring by 0.020 m0.020\,\text{m}0.020m if its spring constant is 150 N/m150\,\text{N/m}150N/m. Assume it obeys Hooke’s law.
Show answer and explanation

Answer: C · Worked explanation

Use F=keF = keF=ke, where k=150 N/mk = 150\,\text{N/m}k=150N/m and e=0.020 me = 0.020\,\text{m}e=0.020m. Therefore, F=150×0.020=3.0 NF = 150 \times 0.020 = 3.0\,\text{N}F=150×0.020=3.0N. The value 7.5 N7.5\,\text{N}7.5N does not follow from multiplying the spring constant by the extension, while using the extension in the wrong units would also give an incorrect result.
4.

Easy·Identify[1 mark]

A force–extension graph for a spring is a straight line through the origin over the range tested. Identify what this shows about the spring in that range.
Show answer and explanation

Answer: D · Worked explanation

A straight line through the origin means that the extension increases in direct proportion to the force over the range tested. At zero force, the extension is zero, so the graph does not indicate a permanent extension. Exceeding the limit of proportionality would cause the graph to stop being a straight line.
5.

Medium·Explain[2 marks]

A soft foam block is squeezed between two hands. Explain how the block’s dimensions change while the compressive force is applied.
Show answer and explanation

Answer: B · Worked explanation

A compressive force pushes the opposite sides of the foam towards each other, so its dimension between the hands decreases. The material can spread sideways as it is compressed, so its other dimensions need not decrease. Equal opposing forces can still compress an object; they do not necessarily cancel the deformation.
6.

Medium·Determine[2 marks]

A spring’s extension is 2.0 cm2.0\,\text{cm}2.0cm when the force is 4.0 N4.0\,\text{N}4.0N, and 4.0 cm4.0\,\text{cm}4.0cm when the force is 8.0 N8.0\,\text{N}8.0N. Determine whether these measurements show direct proportionality.
Show answer and explanation

Answer: D · Worked explanation

The force increases by a factor of 8.0/4.0=28.0/4.0 = 28.0/4.0=2, and the extension also increases by a factor of 4.0/2.0=24.0/2.0 = 24.0/2.0=2. The measurements therefore show direct proportionality. A doubled force does not halve the extension, and having a non-zero extension does not by itself show that a spring is inelastic.
7.

Medium·Calculate[2 marks]

A spring has a spring constant of 250 N/m250\,\text{N/m}250N/m. Calculate its extension when a force of 5.0 N5.0\,\text{N}5.0N is applied, assuming the spring obeys Hooke’s law.
Show answer and explanation

Answer: D · Worked explanation

Rearrange F=keF = keF=ke to give e=F/ke = F/ke=F/k. Substituting the values gives e=5.0/250=0.020 me = 5.0/250 = 0.020\,\text{m}e=5.0/250=0.020m. The tempting value 0.050 m0.050\,\text{m}0.050m results from dividing by 100 rather than by the spring constant of 250 N/m250\,\text{N/m}250N/m.
8.

Medium·Calculate[2 marks]

A spring is compressed by 3.0 cm3.0\,\text{cm}3.0cm. Its spring constant is 200 N/m200\,\text{N/m}200N/m. Calculate the magnitude of the force, assuming Hooke’s law applies.
Show answer and explanation

Answer: C · Worked explanation

The compression has magnitude 0.030 m0.030\,\text{m}0.030m. Using F=keF = keF=ke, the force magnitude is 200 N/m×0.030 m=6.0 N200\,\text{N/m} \times 0.030\,\text{m} = 6.0\,\text{N}200N/m×0.030m=6.0N. Using 3.0 as though it were metres would give a much larger result; centimetres must be converted to metres before using this spring constant.
9.

Medium·Interpret[2 marks]

For a material, measured extensions are 1.0 cm1.0\,\text{cm}1.0cm at 2.0 N2.0\,\text{N}2.0N, 2.0 cm2.0\,\text{cm}2.0cm at 4.0 N4.0\,\text{N}4.0N and 3.5 cm3.5\,\text{cm}3.5cm at 6.0 N6.0\,\text{N}6.0N. Interpret these results.
Show answer and explanation

Answer: D · Worked explanation

From 2.0 N2.0\,\text{N}2.0N to 4.0 N4.0\,\text{N}4.0N, both force and extension double, which is consistent with direct proportionality. If the relationship stayed proportional, 6.0 N6.0\,\text{N}6.0N would give an extension of 3.0 cm3.0\,\text{cm}3.0cm, not 3.5 cm3.5\,\text{cm}3.5cm. The data indicate a departure from proportionality, but do not show whether the material has a permanent extension after unloading.
10.

Hard·Deduce[2 marks]

A spring’s extension is proportional to force up to 10 N10\,\text{N}10N. At 12 N12\,\text{N}12N, its extension is greater than the value predicted by extending that proportional relationship. Deduce which statement is supported by these results.
Show answer and explanation

Answer: A · Worked explanation

The extension no longer follows the proportional relationship beyond 10 N10\,\text{N}10N, so the spring has passed its limit of proportionality. This does not alone show that it has passed its elastic limit: that would require evidence that it does not return to its original length when unloaded. A change in extension per unit force is not evidence that the relationship remains proportional.

Keep going

Next topic6.5.4 Forces and motionPrevious topic6.5.2 Work done and energy transfer

More in Section 6.5 · Physics: Forces

  1. 6.5.1Forces and their interactionsNotes · 10 questions
  2. 6.5.2Work done and energy transferNotes · 10 questions
  3. 6.5.3Forces and elasticityNotes · 10 questions
  4. 6.5.4Forces and motionNotes · 10 questions
  5. 6.5.5MomentumNotes · 10 questions· Higher tier

All AQA GCSE Combined Science: Trilogy topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by AQA or any exam board.

On this page

0/4 read

  1. 1Forces can change an object’s shape
  2. 2Spring extension is proportional to force within a limit
  3. 3The spring constant gives the required force
  4. 4Extension graphs show proportionality and permanent changes
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe