Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›Edexcel A-level Biology A (Salters-Nuffield)
  3. ›2 Genes and Health
  4. ›2.3 Osmosis

Edexcel A-level Biology A (Salters-Nuffield) · Topic 2 · Genes and Health

2.3 Osmosis

Define osmosis, predict the direction of water movement using water potential, and explain the effects on animal and plant cells.

  • 5 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Water moves from higher to lower water potential
  1. 1Water moves from higher to lower water potential
  2. 2Osmosis is net water movement across a partially permeable membrane
  3. 3Animal cells burst or shrink as water crosses their membrane
  4. 4A cell wall lets plant cells become firm instead of bursting
  5. 5Changes in mass show the water potential of plant tissue
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Water moves from higher to lower water potential

Drop a raisin into water and it swells. Water enters the raisin, and the raisin spends no energy to make this happen. The movement is driven by a difference in water potential between inside and outside.

The tendency of water molecules to move is called water potential, symbol Ψ\PsiΨ. It measures how freely water molecules can move, in kilopascals (kPa). Pure water has the highest value, 0 kPa. Dissolved solutes lower it, so every solution has a negative value.

Common mistake

A more negative value means a lower water potential. A solution at −500 kPa has a lower water potential than one at −100 kPa.

Key term

water potential

Water potential, Ψ\PsiΨ, is the tendency of water molecules to move, measured in kPa; pure water has the highest value, 0 kPa.

Part 1 done

2

Part 2 of 5: Osmosis is net water movement across a partially permeable membrane

Now that water potential is clear, we can see where it matters: the cell surface membrane. A partially permeable membrane lets small molecules such as water pass. It blocks or slows most dissolved solutes. Water crosses between the phospholipids and through water channel proteins.

This overall movement is called osmosis. It is the net movement of water through a partially permeable membrane from higher to lower water potential. Water molecules cross in both directions, but only the net movement is described.

Worked example

Predicting the direction of water movement

A plant cell has a water potential of −450 kPa. It is placed in a sugar solution with a water potential of −200 kPa. Predict the direction of net water movement.
  1. 1
    Write down both values: cell −450 kPa, solution −200 kPa.
  2. 2
    Compare them: −200 kPa is higher than −450 kPa.
  3. 3
    Water moves from higher to lower water potential, so from the solution to the cell.

Answer: Net water movement is into the cell, by osmosis.

Exam tip

In answers, name both water potentials and state which is higher. Then give the direction of net movement.

Key terms · tap one for its definition

partially permeable membrane

A partially permeable membrane allows some substances, such as water, to cross more easily than others, such as large solutes.

osmosis

Osmosis is the net movement of water through a partially permeable membrane from higher to lower water potential.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the correct definition of osmosis.
Show answer and explanation

Answer: A · Worked explanation

Osmosis is the net movement of water, not solutes, down a water potential gradient. Water goes from higher to lower water potential through a partially permeable membrane and needs no energy from the cell. Movement from lower to higher water potential reverses the direction, so it is not osmosis.
3

Part 3 of 5: Animal cells burst or shrink as water crosses their membrane

Now apply this to a living cell. A red blood cell has a membrane but no cell wall, so nothing limits its change in size.

Place the cell in pure water. Its cytoplasm has a lower water potential than the water outside. Water enters by osmosis, the cell swells and the membrane eventually breaks. This bursting is called lysis.

Place the cell in a concentrated salt solution instead. The solution has the lower water potential, so water leaves. The cell shrinks and looks shrivelled. If the solution matches the cell’s water potential, there is no net movement and the size stays the same.

Key term

lysis

Lysis is the bursting of a cell when its membrane breaks after too much water enters.

Part 3 done

4

Part 4 of 5: A cell wall lets plant cells become firm instead of bursting

Plant cells face the same water movement, but they have a strong cellulose cell wall. In pure water, water enters by osmosis and the contents swell. The wall pushes back, so the cell does not burst. It becomes firm, or turgid.

The pressure of the contents against the wall is called turgor pressure. Turgid cells hold leaves out flat and keep soft stems upright.

In a concentrated solution, water leaves and the cell first goes limp, or flaccid. With more water loss the membrane pulls away from the wall. This is plasmolysis.

Figure 1. In pure water the contents press against the wall. In a concentrated solution they shrink away from it.

Effects of different surrounding solutions on animal and plant cells

Surrounding solutionAnimal cellPlant cell
Pure waterSwells and may burst (lysis)Swells and becomes turgid
Equal water potentialNo net movement; size unchangedNo net movement; cell is flaccid
Concentrated solutionShrinks and shrivelsPlasmolysis occurs
Surrounding solution
Pure water
Animal cell
Swells and may burst (lysis)
Plant cell
Swells and becomes turgid
Surrounding solution
Equal water potential
Animal cell
No net movement; size unchanged
Plant cell
No net movement; cell is flaccid
Surrounding solution
Concentrated solution
Animal cell
Shrinks and shrivels
Plant cell
Plasmolysis occurs
Go deeperWater potential has two parts

Water potential is the sum of two effects. The solute potential, Ψs\Psi_\mathrm{s}Ψs​, is zero or negative because solutes lower it. The pressure potential, Ψp\Psi_\mathrm{p}Ψp​, is positive when a cell wall pushes against the contents. So Ψ=Ψs+Ψp\Psi=\Psi_\mathrm{s}+\Psi_\mathrm{p}Ψ=Ψs​+Ψp​.

In a turgid cell the pressure potential rises until the cell’s water potential equals that of the surrounding water. Net movement then stops, even though the cell still contains solutes.

Key terms · tap one for its definition

turgid

A turgid cell is a plant cell that is firm because water has pushed its contents against the cell wall.

plasmolysis

Plasmolysis is the shrinking of a plant cell’s cytoplasm and membrane away from the cell wall as water leaves.

Part 4 done

Quick check

One question on the part you just read

Easy

State the water potential of pure water.
Show answer and explanation

Answer: C · Worked explanation

Pure water has the highest possible water potential, which is 0 kPa. Adding solutes lowers the value, which is why solutions have negative values. A value of −100 kPa describes a solution, not pure water, and a positive value would be higher than that of pure water.
5

Part 5 of 5: Changes in mass show the water potential of plant tissue

Osmosis in plant tissue can be measured with a simple experiment. Potato is a common choice.

  • Cut potato cylinders of equal length and diameter, then weigh each one.
  • Place one cylinder in each of several sucrose solutions of different concentrations.
  • Leave them for the same time at the same temperature.
  • Blot each cylinder dry and weigh it again.

Starting masses differ slightly, so use the percentage change in mass for each cylinder.

Worked example

Calculating percentage change in mass

A potato cylinder has a mass of 2.50 g at the start. After 2 hours in a sucrose solution its mass is 2.20 g. Calculate the percentage change in mass.
  1. 1
    Word equation: percentage change equals the change in mass divided by the initial mass, multiplied by 100.
  2. 2
    Symbol equation: mfinal−minitialminitial×100\frac{m_\mathrm{final}-m_\mathrm{initial}}{m_\mathrm{initial}}\times100minitial​mfinal​−minitial​​×100, where mmm is mass.
  3. 3
    Substitute: 2.20 g−2.50 g2.50 g×100\frac{2.20\,\mathrm{g}-2.50\,\mathrm{g}}{2.50\,\mathrm{g}}\times1002.50g2.20g−2.50g​×100.
  4. 4
    Calculate: −0.302.50×100=−12\frac{-0.30}{2.50}\times100=-122.50−0.30​×100=−12.

Answer: The mass changed by −12%. The cylinder lost water, so the solution had a lower water potential than the tissue.

Plot percentage change against solution concentration. Where the line crosses 0%, there is no net water movement. The solution then has the same water potential as the tissue.

Exam tip

Use percentage change, not the raw change in mass. The cylinders do not all start with the same mass.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[2 marks]

    Define osmosis.

    Show mark schemeHide mark scheme

    Model answer

    Osmosis is the net movement of water through a partially permeable membrane from a region of higher water potential to a region of lower water potential.

    • 1 mark for stating that it is the net movement of water through a partially permeable membrane
    • 1 mark for stating that the movement is from higher to lower water potential
  2. 2.Predict[2 marks]

    Predict the direction of net water movement between a cell with a water potential of −600 kPa and a solution of −350 kPa. Give a reason.

    Show mark schemeHide mark scheme

    Model answer

    Water moves into the cell, because the solution has the higher water potential and water moves from higher to lower water potential.

    • 1 mark for predicting net movement into the cell
    • 1 mark for giving the reason that the solution has the higher water potential (−350 kPa is higher than −600 kPa)
  3. 3.Explain[3 marks]

    Explain why an animal cell may burst in pure water but a plant cell does not.

    Show mark schemeHide mark scheme

    Model answer

    Water enters both cells by osmosis. The animal cell has no cell wall, so it keeps swelling until the membrane breaks. The plant cell wall pushes back, so the cell becomes turgid instead.

    • 1 mark for stating that water enters both cells by osmosis
    • 1 mark for stating that the animal cell has no cell wall to resist swelling, so it bursts (lysis)
    • 1 mark for stating that the plant cell wall pushes back so the cell becomes turgid and does not burst
  4. 4.Describe[3 marks]

    Describe what happens to a plant cell placed in a concentrated sugar solution.

    Show mark schemeHide mark scheme

    Model answer

    The solution has the lower water potential, so water leaves the cell by osmosis. The cell goes flaccid. The membrane and cytoplasm then pull away from the cell wall, which is plasmolysis.

    • 1 mark for stating that water leaves the cell by osmosis because the solution has the lower water potential
    • 1 mark for stating that the cell becomes flaccid
    • 1 mark for stating that the membrane and cytoplasm pull away from the wall (plasmolysis)
  5. 5.Calculate[3 marks]

    Calculate the percentage change in mass of a potato cylinder that goes from 3.00 g to 3.27 g. Include the sign.

    Show mark schemeHide mark scheme

    Model answer

    Percentage change =3.27−3.003.00×100=+9.0%=\frac{3.27-3.00}{3.00}\times100=+9.0\%=3.003.27−3.00​×100=+9.0%.

    • 1 mark for finding the change in mass as 0.27 g
    • 1 mark for dividing by the initial mass, 3.00 g, and multiplying by 100
    • 1 mark for giving the answer as +9.0%
  6. 6.Explain[2 marks]

    Explain why a student plots percentage change in mass rather than the change in mass.

    Show mark schemeHide mark scheme

    Model answer

    The cylinders may start with different masses. Percentage change allows a fair comparison between them.

    • 1 mark for stating that the starting masses of the cylinders differ
    • 1 mark for explaining that percentage change allows a fair comparison

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the solution with the lowest water potential.
Show answer and explanation

Answer: D · Worked explanation

Water potentials are compared as signed numbers. The most negative value is the lowest, so −450 kPa is the lowest here. A common error is choosing −20 kPa because the number looks smallest, but that is actually the highest water potential, closest to pure water at 0 kPa.
4.

Medium·Predict[1 mark]

Predict the net movement of water when a cell with a water potential of −300 kPa is placed in a solution with a water potential of −800 kPa.
Show answer and explanation

Answer: B · Worked explanation

Water moves from higher to lower water potential. The cell at −300 kPa is higher than the solution at −800 kPa, so water leaves the cell. Movement into the cell comes from treating −800 as a larger value, but −800 kPa is the more negative and therefore lower value.
5.

Medium·Calculate[1 mark]

A potato cylinder has a mass of 3.20 g. After soaking in a sucrose solution it has a mass of 3.52 g. Calculate the percentage change in mass.
Show answer and explanation

Answer: C · Worked explanation

Percentage change is the change in mass divided by the initial mass, multiplied by 100. The change is 3.52−3.20=0.32 g3.52-3.20=0.32\,\mathrm{g}3.52−3.20=0.32g, and 0.323.20=0.10\frac{0.32}{3.20}=0.103.200.32​=0.10, which is +10%. The value +9.1% comes from dividing by the final mass instead of the initial mass.
6.

Medium·Predict[1 mark]

Predict what happens to a red blood cell placed in pure water.
Show answer and explanation

Answer: A · Worked explanation

Pure water has a higher water potential than the cell contents, so water enters by osmosis. With no cell wall to resist, the cell swells and may burst. Becoming turgid is a plant cell response, because it needs a wall, and shrinking happens when water leaves in a concentrated solution.
7.

Medium·Identify[1 mark]

Identify the observation that shows a plant cell has become plasmolysed.
Show answer and explanation

Answer: D · Worked explanation

Plasmolysis happens when water leaves a plant cell and the membrane and cytoplasm shrink away from the wall. A cell that is firm and pressed against its wall is turgid, which is the opposite state. A broken membrane after swelling describes lysis, which occurs in animal cells.
8.

Hard·Determine[2 marks]

Potato cylinders change in mass by +8% in 0.2 mol dm−30.2\,\mathrm{mol\,dm^{-3}}0.2moldm−3 sucrose, +2% in 0.4 mol dm−30.4\,\mathrm{mol\,dm^{-3}}0.4moldm−3, −4% in 0.6 mol dm−30.6\,\mathrm{mol\,dm^{-3}}0.6moldm−3 and −10% in 0.8 mol dm−30.8\,\mathrm{mol\,dm^{-3}}0.8moldm−3. Assuming a straight line between neighbouring points, determine the concentration at which there is no change in mass.
Show answer and explanation

Answer: B · Worked explanation

Between 0.4 and 0.6 the change falls from +2% to −4%, a drop of 6 points over 0.2 mol dm−30.2\,\mathrm{mol\,dm^{-3}}0.2moldm−3. Zero is reached 2 of the 6 points along, so 0.4+26×0.2≈0.470.4+\frac{2}{6}\times0.2\approx0.470.4+62​×0.2≈0.47. The midpoint, 0.50, would only be correct if the end values were +2% and −2%.
9.

Hard[2 marks]

Which statement about a plant cell placed in a solution with the same water potential as the cell is correct?
Show answer and explanation

Answer: D · Worked explanation

When water potentials are equal, molecules still move across the membrane in both directions at the same rate, so there is no net movement. The idea that all movement stops is a common misconception. Water entering until the cell is turgid needs the solution to have a higher water potential than the cell.
10.

Hard·Predict[2 marks]

A red blood cell with contents at −700 kPa is placed in three solutions: X at −1200 kPa, Y at −700 kPa and Z at −200 kPa. Predict the result in each.
Show answer and explanation

Answer: C · Worked explanation

Solution X has a lower water potential than the cell, so water leaves and the cell shrinks. Solution Y matches the cell, so there is no net movement. Solution Z has a higher water potential, so water enters and the cell swells. The reversed pattern comes from treating −1200 kPa as the higher value.

Keep going

Next topic2.4 Passive and active transportPrevious topic2.2 Cell membranes and the fluid mosaic model

More in Topic 2 · Genes and Health

  1. 2.1Gas exchange surfaces and Fick's lawNotes · 10 questions
  2. 2.2Cell membranes and the fluid mosaic modelNotes · 10 questions
  3. 2.3OsmosisNotes · 10 questions
  4. 2.4Passive and active transportNotes · 10 questions
  5. 2.5Nucleotides and DNA structureNotes · 10 questions
  6. 2.6Protein synthesisNotes · 10 questions
  7. 2.7The genetic codeNotes · 10 questions
  8. 2.8Genes and polypeptidesNotes · 10 questions
  9. 2.9Amino acids and protein structureNotes · 10 questions

All Edexcel A-level Biology A (Salters-Nuffield) topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by Pearson Edexcel or any exam board.

On this page

0/5 read

  1. 1Water moves from higher to lower water potential
  2. 2Osmosis is net water movement across a partially permeable membrane
  3. 3Animal cells burst or shrink as water crosses their membrane
  4. 4A cell wall lets plant cells become firm instead of bursting
  5. 5Changes in mass show the water potential of plant tissue
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe