Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›R2 How much, how fast and how far?
  4. ›R2.2 Rate of chemical change

IB Chemistry · R2 · How much, how fast and how far?

R2.2 Rate of chemical change

Explain how conditions and catalysts change reaction rates using collision theory, and interpret rate–time graphs.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Successful collisions determine how quickly reactions proceed
  1. 1Successful collisions determine how quickly reactions proceed
  2. 2Temperature and concentration change the frequency of successful collisions
  3. 3Smaller solid pieces expose more surface to collisions
  4. 4Catalysts provide a route with lower activation energy
  5. 5Rate–time graphs show how reaction speed changes
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Successful collisions determine how quickly reactions proceed

A reaction occurs when particles collide with enough energy and a suitable orientation. Collision theory links reaction rate to the frequency of these successful collisions. The activation energy is the minimum energy needed for a collision to lead to reaction. A collision below this energy does not produce products, even if the particles meet.

The reaction rate describes how quickly a reactant disappears or a product forms. It can be measured as a change in concentration divided by a time interval. As reactants are used up, their concentration often falls. Collisions then become less frequent, so the rate usually decreases.

Key terms · tap one for its definition

Collision theory

Collision theory explains reaction rates through the frequency of collisions with sufficient energy and suitable orientation.

activation energy

Activation energy is the minimum energy needed for a collision to lead to reaction.

reaction rate

Reaction rate is the change in a reactant or product quantity per unit time.

Part 1 done

2

Part 2 of 5: Temperature and concentration change the frequency of successful collisions

Increasing temperature makes particles move faster. They collide more frequently, and a greater proportion of collisions have enough energy to react. This increase in the proportion of successful collisions is especially important. Cooling has the opposite effect.

Increasing concentration puts more reacting particles in a given volume. They collide more frequently, so the reaction rate increases if other conditions stay the same. For reactions involving a gas, increasing its pressure by reducing the volume also raises its concentration. Pressure changes affect rate only when they change the concentration of reacting gases.

Common mistake

Higher concentration does not lower activation energy. It increases how often reacting particles collide.

Key terms · tap one for its definition

temperature

Temperature indicates the average kinetic energy of particles and affects the proportion of collisions above the activation energy.

concentration

Concentration is the amount of a substance per unit volume of solution.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the change that usually increases the rate of a reaction between a solid and a liquid, when the solid's total mass and all other conditions remain unchanged.
Show answer and explanation

Answer: A · Worked explanation

Crushing exposes more of the solid to the liquid, so more particles are available for collisions at the solid's surface. This usually increases the reaction rate. Cooling the mixture is a tempting alternative, but it reduces particle kinetic energy and generally lowers the frequency of successful collisions.
3

Part 3 of 5: Smaller solid pieces expose more surface to collisions

When a solid reacts with a liquid or gas, collisions happen at the exposed surface. Crushing the solid increases its surface area without changing its total mass. More particles are available at the surface, so collisions occur more frequently. A powder therefore usually reacts faster than one large piece of the same solid.

This effect matters for reactions involving a solid reactant. It does not explain a rate change when all reactants are evenly mixed in one solution. Surface area changes the frequency of collisions at the solid's surface. It does not change the activation energy.

Exam tip

When explaining a faster reaction, name the condition changed. Then link it to more successful collisions per unit time.

Key term

surface area

Surface area is the exposed area of a solid available for collisions with other reactants.

Part 3 done

4

Part 4 of 5: Catalysts provide a route with lower activation energy

A catalyst speeds up a reaction without being used up overall. It provides an alternative pathway with a lower activation energy. At the same temperature, a greater proportion of collisions can then lead to reaction. Catalysts may take part in intermediate steps, but they are regenerated.

A catalyst does not need to increase the energy of the particles. It changes the route by which reactants become products. Unlike increasing temperature, adding a catalyst does not make particles move faster. For a reaction that can proceed both forwards and backwards, a catalyst speeds up both directions.

Common mistake

A catalyst is not a reactant that is permanently consumed. It is regenerated during the reaction.

Key terms · tap one for its definition

catalyst

A catalyst increases reaction rate by providing a lower-activation-energy pathway and is not used up overall.

alternative pathway

An alternative pathway is a different sequence of steps by which reactants form products.

Part 4 done

Quick check

One question on the part you just read

Easy

State what happens to the reaction rate when the concentration of a reacting solution is increased while temperature and other conditions stay constant.
Show answer and explanation

Answer: B · Worked explanation

A higher concentration means more reacting particles in a given volume, so collisions occur more frequently and the reaction rate usually increases. A lower activation energy is a tempting explanation, but concentration does not change the energy barrier; it changes how often particles encounter one another.
5

Part 5 of 5: Rate–time graphs show how reaction speed changes

A rate–time graph has rate on the vertical axis and time on the horizontal axis. A higher point means a faster reaction at that moment. For many reactions, the curve starts high and falls as reactants are used up. It approaches zero when the reaction stops. When sketching, label both axes and show the trend appropriate to the conditions.

The rate over a time interval can be found from a concentration change. This gives an average rate, not necessarily the rate at every instant.

Worked example

Finding an average rate

A reactant's concentration falls from 0.80 to 0.60 mol dm⁻³ in 20 s. Calculate its average rate of disappearance.
  1. 1
    Find the concentration decrease: 0.80−0.60=0.20 mol dm−30.80-0.60=0.20\,\mathrm{mol\,dm^{-3}}0.80−0.60=0.20moldm−3.
  2. 2
    Divide by the elapsed time: 0.2020=0.010 mol dm−3 s−1\frac{0.20}{20}=0.010\,\mathrm{mol\,dm^{-3}\,s^{-1}}200.20​=0.010moldm−3s−1.

Answer: The average rate of disappearance is 0.010 mol dm−3 s−10.010\,\mathrm{mol\,dm^{-3}\,s^{-1}}0.010moldm−3s−1.

Figure 1. The rate falls as reactants are used up. The curve approaches zero when the reaction stops.

Key term

rate–time graph

A rate–time graph shows how a reaction's rate changes with time.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State what activation energy means.

    Show mark schemeHide mark scheme

    Model answer

    Activation energy is the minimum energy needed for a collision to lead to reaction.

    • 1 mark for identifying the minimum energy needed for a collision to lead to reaction
  2. 2.Explain[3 marks]

    Explain why increasing temperature usually increases reaction rate.

    Show mark schemeHide mark scheme

    Model answer

    Particles move faster and collide more often. A greater proportion of collisions have enough energy to react. There are therefore more successful collisions per unit time.

    • 1 mark for stating that particles move faster and collide more frequently
    • 1 mark for stating that a greater proportion of collisions have sufficient energy
    • 1 mark for linking these changes to more successful collisions per unit time
  3. 3.Explain[3 marks]

    Explain why crushing a solid reactant can increase its reaction rate.

    Show mark schemeHide mark scheme

    Model answer

    Crushing increases the solid's exposed surface area. More particles are available at its surface. Collisions with the other reactant occur more frequently, increasing the rate.

    • 1 mark for stating that crushing increases exposed surface area
    • 1 mark for stating that more solid particles are available for collisions at the surface
    • 1 mark for linking more frequent collisions to a faster reaction
  4. 4.Explain[3 marks]

    Explain how a catalyst increases reaction rate without being used up overall.

    Show mark schemeHide mark scheme

    Model answer

    A catalyst provides an alternative pathway with lower activation energy. More collisions can then lead to reaction. The catalyst is regenerated during the reaction.

    • 1 mark for identifying an alternative pathway with lower activation energy
    • 1 mark for linking lower activation energy to more successful collisions
    • 1 mark for stating that the catalyst is regenerated
  5. 5.Sketch[3 marks]

    Sketch a rate–time graph for a reaction whose rate falls as reactants are used up.

    Show mark schemeHide mark scheme

    Model answer

    Put time on the horizontal axis and rate on the vertical axis. Draw a curve that begins high, falls with time and approaches zero.

    • 1 mark for labelling time on the horizontal axis and rate on the vertical axis
    • 1 mark for showing a rate that begins high and decreases with time
    • 1 mark for showing the rate approaching zero
  6. 6.Calculate[2 marks]

    Calculate the average rate of disappearance when a reactant's concentration falls from 0.80 to 0.60 mol dm⁻³ in 20 s.

    Show mark schemeHide mark scheme

    Model answer

    The concentration decrease is 0.80−0.60=0.20 mol dm−30.80-0.60=0.20\,\mathrm{mol\,dm^{-3}}0.80−0.60=0.20moldm−3. The average rate is 0.2020=0.010 mol dm−3 s−1\frac{0.20}{20}=0.010\,\mathrm{mol\,dm^{-3}\,s^{-1}}200.20​=0.010moldm−3s−1.

    • 1 mark for calculating the concentration decrease as 0.20 mol dm−30.20\,\mathrm{mol\,dm^{-3}}0.20moldm−3
    • 1 mark for dividing by 20 s to obtain 0.010 mol dm−3 s−10.010\,\mathrm{mol\,dm^{-3}\,s^{-1}}0.010moldm−3s−1

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the condition that changes the proportion of collisions with enough energy to react by changing the energy barrier, rather than by changing particle speed or number per volume.
Show answer and explanation

Answer: D · Worked explanation

A catalyst provides an alternative pathway with a lower activation energy, so a greater proportion of collisions can lead to reaction at the same temperature. Increasing concentration or gas pressure is a tempting alternative, but these changes increase collision frequency rather than lowering the energy barrier.
4.

Easy·Identify[1 mark]

Identify the correct axis labels for a rate–time graph.
Show answer and explanation

Answer: C · Worked explanation

A rate–time graph shows how the reaction rate varies as time passes, so rate belongs on the vertical axis and time on the horizontal axis. Putting time vertically is a tempting reversal, but it would not follow the convention used to display the changing rate against elapsed time.
5.

Medium·Determine[2 marks]

A gas-phase reaction is carried out in a sealed syringe. The same amounts of gases are compressed into a smaller volume, with temperature kept constant. Determine the most likely effect on the reaction rate.
Show answer and explanation

Answer: A · Worked explanation

Reducing the volume while keeping the amounts of gas constant raises their concentrations. The gas particles therefore collide more frequently, increasing the reaction rate. It is tempting to focus on the unchanged amounts, but concentration depends on amount per volume; compression does not lower activation energy.
6.

Medium·Deduce[2 marks]

At the same temperature, reaction X is faster after a catalyst is added. Deduce which collision-theory explanation fits this observation.
Show answer and explanation

Answer: C · Worked explanation

The catalyst provides an alternative pathway with lower activation energy. At the same temperature, a greater proportion of collisions have enough energy to react, increasing the rate. Faster particle motion is tempting, but a catalyst does not raise the particles' kinetic energy; increasing temperature would affect their motion.
7.

Medium·Interpret[2 marks]

A reaction's rate is measured at successive times: 0 s, 0.40 mol dm⁻³ s⁻¹; 10 s, 0.24 mol dm⁻³ s⁻¹; 20 s, 0.10 mol dm⁻³ s⁻¹; 30 s, 0.00 mol dm⁻³ s⁻¹. Interpret the trend that a rate–time graph should show.
Show answer and explanation

Answer: C · Worked explanation

The measured rates decrease at each time, from 0.40 to 0.00 mol dm⁻³ s⁻¹, so the graph should fall and reach zero at 30 s. A graph that remains above zero is tempting because many reactions slow gradually, but here the supplied final measurement is explicitly zero.
8.

Medium·Explain[2 marks]

A reaction mixture is cooled, and its reaction rate falls. Explain this change using collision theory.
Show answer and explanation

Answer: B · Worked explanation

Cooling reduces particles' kinetic energy, so they move more slowly and collide less frequently. In addition, a smaller proportion of collisions have enough energy to overcome the activation energy, giving fewer successful collisions per unit time. An increase in activation energy is a tempting explanation, but cooling does not change the energy barrier.
9.

Medium·Calculate[2 marks]

In a trial, the average rate of disappearance of a reactant is 0.018 mol dm−3 s−10.018\,\text{mol dm}^{-3}\,\text{s}^{-1}0.018mol dm−3s−1. Its concentration decreases by 0.27 mol dm−30.27\,\text{mol dm}^{-3}0.27mol dm−3. Calculate the time interval for this change.
Show answer and explanation

Answer: B · Worked explanation

Average rate equals concentration change divided by time, so time equals concentration change divided by rate: 0.27 mol dm−3/(0.018 mol dm−3 s−1)=15 s0.27\,\text{mol dm}^{-3} / (0.018\,\text{mol dm}^{-3}\,\text{s}^{-1}) = 15\,\text{s}0.27mol dm−3/(0.018mol dm−3s−1)=15s. The tempting value 0.067 s comes from dividing the rate by the concentration change, which reverses the required calculation.
10.

Hard·Compare[2 marks]

Two trials use equal masses of the same solid reactant in equal volumes of the same solution. Trial P uses one large solid piece at 30 °C; trial Q uses powdered solid at 20 °C. Which conclusion is best supported without further measurements?
Show answer and explanation

Answer: B · Worked explanation

Powdering increases exposed surface area and tends to increase the rate, while the lower temperature in trial Q tends to decrease it. Since these effects oppose each other and their sizes are not specified, the relative rates cannot be deduced. It is tempting to assume powder must win, but the temperature difference could have a larger effect.

Keep going

Next topicR2.3 Extent of chemical change (equilibrium)Previous topicR2.1 Amount of chemical change

More in R2 · How much, how fast and how far?

  1. R2.1Amount of chemical changeNotes · 10 questions
  2. R2.2Rate of chemical changeNotes · 10 questions
  3. R2.3Extent of chemical change (equilibrium)Notes · 10 questions

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Successful collisions determine how quickly reactions proceed
  2. 2Temperature and concentration change the frequency of successful collisions
  3. 3Smaller solid pieces expose more surface to collisions
  4. 4Catalysts provide a route with lower activation energy
  5. 5Rate–time graphs show how reaction speed changes
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe