Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›R2 How much, how fast and how far?
  4. ›R2.1 Amount of chemical change

IB Chemistry · R2 · How much, how fast and how far?

R2.1 Amount of chemical change

Use balanced equations to calculate reacting amounts, yields, atom economy and quantities involving solutions or gases.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Balanced equations give ratios between reacting amounts
  1. 1Balanced equations give ratios between reacting amounts
  2. 2The limiting reactant sets the maximum product amount
  3. 3Percentage yield compares actual product with the maximum
  4. 4Atom economy measures how much reactant becomes useful product
  5. 5Concentration and molar volume provide moles for calculations
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Balanced equations give ratios between reacting amounts

A balanced equation shows the relative numbers of particles reacting. Its coefficients also give a mole ratio. For example, 2Mg+O2→2MgO2\mathrm{Mg}+\mathrm{O_2}\rightarrow2\mathrm{MgO}2Mg+O2​→2MgO shows that two moles of magnesium react with one mole of oxygen. They form two moles of magnesium oxide. These ratios apply to amounts in moles, not directly to masses.

Convert a given mass to moles using n=mMn=\frac{m}{M}n=Mm​, where MMM is molar mass. Then apply the equation’s ratio and convert back to mass if needed. Check that the equation is balanced before calculating. Changing a coefficient changes the reacting amounts; changing a chemical formula changes the substance.

Figure 1. Use the balanced equation only after converting the given quantity to moles.

Key terms · tap one for its definition

balanced equation

A balanced equation has equal numbers of each element’s atoms on both sides.

mole ratio

A mole ratio is the relationship between amounts of substances given by balanced equation coefficients.

molar mass

Molar mass is the mass of one mole of a substance, usually expressed in g mol⁻¹.

Part 1 done

2

Part 2 of 5: The limiting reactant sets the maximum product amount

When amounts of both reactants are known, compare them using the equation. A limiting reactant runs out first when another reactant is in excess. At exact stoichiometric proportions, neither remains. Calculate how much product each reactant could form, then choose the smaller amount. This is the theoretical yield: the maximum product predicted from the limiting reactant.

Worked example

Finding the limiting reactant

Magnesium reacts with oxygen: 2Mg+O2→2MgO2\mathrm{Mg}+\mathrm{O_2}\rightarrow2\mathrm{MgO}2Mg+O2​→2MgO. Find the limiting reactant and theoretical yield from 4.80 g Mg and 2.40 g O2\mathrm{O_2}O2​. Use molar masses of 24.0, 32.0 and 40.0 g mol⁻¹ for Mg, O2\mathrm{O_2}O2​ and MgO.
  1. 1
    n(Mg)=4.8024.0=0.200 moln(\mathrm{Mg})=\frac{4.80}{24.0}=0.200\ \mathrm{mol}n(Mg)=24.04.80​=0.200 mol; n(O2)=2.4032.0=0.0750 moln(\mathrm{O_2})=\frac{2.40}{32.0}=0.0750\ \mathrm{mol}n(O2​)=32.02.40​=0.0750 mol.
  2. 2
    The oxygen needs 2×0.0750=0.150 mol2\times0.0750=0.150\ \mathrm{mol}2×0.0750=0.150 mol Mg. Magnesium is in excess.
  3. 3
    Oxygen is limiting, so n(MgO)=2×0.0750=0.150 moln(\mathrm{MgO})=2\times0.0750=0.150\ \mathrm{mol}n(MgO)=2×0.0750=0.150 mol.
  4. 4
    m(MgO)=0.150×40.0=6.00 gm(\mathrm{MgO})=0.150\times40.0=6.00\ \mathrm{g}m(MgO)=0.150×40.0=6.00 g.

Answer: Oxygen is limiting; the theoretical yield of magnesium oxide is 6.00 g.

Key terms · tap one for its definition

limiting reactant

The limiting reactant is consumed first and determines the maximum amount of product.

excess

An excess reactant is supplied in more than the amount needed to consume the limiting reactant.

theoretical yield

The theoretical yield is the maximum product amount calculated from the limiting reactant.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the mole ratio of aluminium to oxygen gas in the balanced equation 4Al+3O2→2Al2O34\mathrm{Al}+3\mathrm{O_2}\rightarrow2\mathrm{Al_2O_3}4Al+3O2​→2Al2​O3​.
Show answer and explanation

Answer: A · Worked explanation

The coefficients show that 4 moles of aluminium react with 3 moles of oxygen gas, so the mole ratio is 4:3. The ratio 4:2 compares aluminium with aluminium oxide, not with oxygen gas.
3

Part 3 of 5: Percentage yield compares actual product with the maximum

The actual yield is the amount of product obtained. Percentage yield compares it with the theoretical yield: percentage yield=actual yieldtheoretical yield×100%\text{percentage yield}=\frac{\text{actual yield}}{\text{theoretical yield}}\times100\%percentage yield=theoretical yieldactual yield​×100%. Both yields must use the same unit. If the magnesium oxide reaction gives 4.80 g of product, its percentage yield is 4.806.00×100%=80.0%\frac{4.80}{6.00}\times100\%=80.0\%6.004.80​×100%=80.0%.

A yield below 100% can result from incomplete reaction or product lost during collection. Side reactions may also make unwanted products. These possibilities explain a lower yield, but a calculation alone cannot identify which occurred. A measured mass above the theoretical yield suggests contamination, retained solvent or a measurement error.

Exam tip

Use the limiting reactant to find theoretical yield before calculating percentage yield.

Key terms · tap one for its definition

actual yield

The actual yield is the amount of product obtained from a reaction.

percentage yield

Percentage yield is the actual yield divided by theoretical yield, multiplied by 100%.

Part 3 done

4

Part 4 of 5: Atom economy measures how much reactant becomes useful product

Atom economy measures the fraction of reactant mass represented by a chosen desired product. For a balanced equation, atom economy=mass of desired product in the equationtotal mass of reactants in the equation×100%\text{atom economy}=\frac{\text{mass of desired product in the equation}}{\text{total mass of reactants in the equation}}\times100\%atom economy=total mass of reactants in the equationmass of desired product in the equation​×100%. Use each substance’s molar mass multiplied by its coefficient.

For CaCO3→CaO+CO2\mathrm{CaCO_3}\rightarrow\mathrm{CaO}+\mathrm{CO_2}CaCO3​→CaO+CO2​, suppose calcium oxide is desired. Using molar masses of 100 and 56 g mol⁻¹, atom economy is 56100×100%=56%\frac{56}{100}\times100\%=56\%10056​×100%=56%. The remaining reactant mass forms carbon dioxide. Atom economy comes from the equation, whereas percentage yield uses an amount actually obtained. A reaction can therefore have high atom economy but low percentage yield.

Common mistake

Do not put actual yield into an atom economy calculation. Use masses from the balanced equation.

Key terms · tap one for its definition

atom economy

Atom economy is the percentage of reactant mass represented by the desired product in a balanced equation.

desired product

The desired product is the substance a reaction is intended to make.

Part 4 done

Quick check

One question on the part you just read

Easy

Calculate the amount of water formed when 0.60 mol of hydrogen reacts completely with excess oxygen according to 2H2+O2→2H2O2\mathrm{H_2}+\mathrm{O_2}\rightarrow2\mathrm{H_2O}2H2​+O2​→2H2​O.
Show answer and explanation

Answer: D · Worked explanation

The equation gives a 2:2 ratio between hydrogen and water, which simplifies to 1:1. Therefore, 0.60 mol of hydrogen forms 0.60 mol of water. The tempting 0.30 mol result comes from incorrectly using the oxygen coefficient as the product ratio.
5

Part 5 of 5: Concentration and molar volume provide moles for calculations

For a solution, amount concentration gives n=cVn=cVn=cV. Use volume in dm3\mathrm{dm^3}dm3 when concentration is in mol dm−3\mathrm{mol\,dm^{-3}}moldm−3. For a gas, molar volume gives n=VVmn=\frac{V}{V_m}n=Vm​V​ or V=nVmV=nV_mV=nVm​. Gas molar volume depends on temperature and pressure, so use the value stated for the conditions. Once amounts are in moles, apply the balanced equation as usual.

Worked example

Reacting a solution to produce a gas

Excess calcium carbonate reacts with 50.0 cm³ of 0.100 mol dm⁻³ hydrochloric acid: CaCO3+2HCl→CaCl2+H2O+CO2\mathrm{CaCO_3}+2\mathrm{HCl}\rightarrow\mathrm{CaCl_2}+\mathrm{H_2O}+\mathrm{CO_2}CaCO3​+2HCl→CaCl2​+H2​O+CO2​. Find the maximum carbon dioxide volume at STP (273 K, 100 kPa), where Vm=22.7 dm3 mol−1V_m=22.7\ \mathrm{dm^3\,mol^{-1}}Vm​=22.7 dm3mol−1.
  1. 1
    50.0 cm3=0.0500 dm350.0\ \mathrm{cm^3}=0.0500\ \mathrm{dm^3}50.0 cm3=0.0500 dm3.
  2. 2
    n(HCl)=0.100×0.0500=0.00500 moln(\mathrm{HCl})=0.100\times0.0500=0.00500\ \mathrm{mol}n(HCl)=0.100×0.0500=0.00500 mol.
  3. 3
    n(CO2)=0.005002=0.00250 moln(\mathrm{CO_2})=\frac{0.00500}{2}=0.00250\ \mathrm{mol}n(CO2​)=20.00500​=0.00250 mol.
  4. 4
    V(CO2)=0.00250×22.7=0.0568 dm3V(\mathrm{CO_2})=0.00250\times22.7=0.0568\ \mathrm{dm^3}V(CO2​)=0.00250×22.7=0.0568 dm3.

Answer: The maximum carbon dioxide volume is 0.0568 dm³, or 56.8 cm³.

Exam tip

Convert cubic centimetres to cubic decimetres before using concentration in mol dm⁻³.

Key terms · tap one for its definition

amount concentration

Amount concentration is the amount of dissolved substance per unit volume of solution.

molar volume

Molar volume is the volume occupied by one mole of gas at stated conditions.

Note read

Check your recall[16 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[2 marks]

    Explain why masses cannot be used directly as the coefficients’ ratio in a balanced equation.

    Show mark schemeHide mark scheme

    Model answer

    Coefficients give a ratio of amounts in moles. Substances can have different molar masses, so their masses must first be converted to moles.

    • 1 mark for stating that balanced equation coefficients give a ratio in moles
    • 1 mark for explaining that different molar masses mean masses must first be converted to moles
  2. 2.Calculate[4 marks]

    Calculate the limiting reactant and theoretical mass of magnesium oxide from 2.40 g Mg and 3.20 g oxygen. Use 2Mg+O2→2MgO2\mathrm{Mg}+\mathrm{O_2}\rightarrow2\mathrm{MgO}2Mg+O2​→2MgO and molar masses of 24.0, 32.0 and 40.0 g mol⁻¹, respectively.

    Show mark schemeHide mark scheme

    Model answer

    n(Mg)=0.100 moln(\mathrm{Mg})=0.100\ \mathrm{mol}n(Mg)=0.100 mol and n(O2)=0.100 moln(\mathrm{O_2})=0.100\ \mathrm{mol}n(O2​)=0.100 mol. Magnesium is limiting because 0.100 mol Mg needs only 0.0500 mol oxygen. The equation gives 0.100 mol MgO, so its theoretical mass is 0.100×40.0=4.00 g0.100\times40.0=4.00\ \mathrm{g}0.100×40.0=4.00 g.

    • 1 mark for calculating 0.100 mol Mg
    • 1 mark for calculating 0.100 mol oxygen
    • 1 mark for identifying magnesium as limiting using the 2:1 mole ratio
    • 1 mark for calculating a theoretical magnesium oxide mass of 4.00 g
  3. 3.Calculate[3 marks]

    Calculate percentage yield when the theoretical yield is 6.00 g and the actual yield is 4.80 g. State one possible reason for the result.

    Show mark schemeHide mark scheme

    Model answer

    Percentage yield is 4.806.00×100%=80.0%\frac{4.80}{6.00}\times100\%=80.0\%6.004.80​×100%=80.0%. Some product may have been lost during collection.

    • 1 mark for dividing the actual yield by the theoretical yield
    • 1 mark for calculating a percentage yield of 80.0%
    • 1 mark for suggesting product loss, incomplete reaction or a side reaction
  4. 4.Calculate[3 marks]

    Calculate the atom economy for making calcium oxide from CaCO3→CaO+CO2\mathrm{CaCO_3}\rightarrow\mathrm{CaO}+\mathrm{CO_2}CaCO3​→CaO+CO2​. Use molar masses of 100 g mol⁻¹ for calcium carbonate and 56 g mol⁻¹ for calcium oxide. Explain how this differs from percentage yield.

    Show mark schemeHide mark scheme

    Model answer

    Atom economy is 56100×100%=56%\frac{56}{100}\times100\%=56\%10056​×100%=56%. It uses masses from the balanced equation, while percentage yield compares actual and theoretical amounts of product.

    • 1 mark for using calcium oxide mass divided by calcium carbonate mass
    • 1 mark for calculating an atom economy of 56%
    • 1 mark for distinguishing equation-based atom economy from percentage yield based on actual product obtained
  5. 5.Calculate[4 marks]

    Calculate the maximum carbon dioxide volume when excess calcium carbonate reacts with 25.0 cm³ of 0.200 mol dm⁻³ hydrochloric acid. Use CaCO3+2HCl→CaCl2+H2O+CO2\mathrm{CaCO_3}+2\mathrm{HCl}\rightarrow\mathrm{CaCl_2}+\mathrm{H_2O}+\mathrm{CO_2}CaCO3​+2HCl→CaCl2​+H2​O+CO2​ and Vm=22.7 dm3 mol−1V_m=22.7\ \mathrm{dm^3\,mol^{-1}}Vm​=22.7 dm3mol−1 at STP (273 K, 100 kPa).

    Show mark schemeHide mark scheme

    Model answer

    25.0 cm3=0.0250 dm325.0\ \mathrm{cm^3}=0.0250\ \mathrm{dm^3}25.0 cm3=0.0250 dm3. The acid amount is 0.200×0.0250=0.00500 mol0.200\times0.0250=0.00500\ \mathrm{mol}0.200×0.0250=0.00500 mol. The carbon dioxide amount is 0.00500/2=0.00250 mol0.00500/2=0.00250\ \mathrm{mol}0.00500/2=0.00250 mol. Its maximum volume is 0.00250×22.7=0.0568 dm30.00250\times22.7=0.0568\ \mathrm{dm^3}0.00250×22.7=0.0568 dm3, or 56.8 cm³.

    • 1 mark for converting the solution volume to 0.0250 dm³
    • 1 mark for calculating 0.00500 mol hydrochloric acid
    • 1 mark for using the 2:1 ratio to calculate 0.00250 mol carbon dioxide
    • 1 mark for calculating 0.0568 dm³ or 56.8 cm³ carbon dioxide

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the quantity needed to calculate percentage yield when the actual yield is already known.
Show answer and explanation

Answer: A · Worked explanation

Percentage yield is calculated by dividing actual yield by theoretical yield and multiplying by 100%. The total mass of reactants is not the denominator in this calculation; it is relevant to other measures, such as atom economy.
4.

Easy·State[1 mark]

State the volume in dm³ that should be used when 35.0 cm³ of solution is substituted into n=cVn=cVn=cV with concentration in mol dm⁻³.
Show answer and explanation

Answer: A · Worked explanation

Since 1 dm3=1000 cm31\,\mathrm{dm^3}=1000\,\mathrm{cm^3}1dm3=1000cm3, divide 35.0 cm³ by 1000 to obtain 0.0350 dm³. Using 35.0 directly would make the calculated amount 1000 times too large.
5.

Medium·Calculate[2 marks]

Calculate the mass of carbon dioxide formed when 5.00 g of calcium carbonate decomposes completely according to CaCO3→CaO+CO2\mathrm{CaCO_3}\rightarrow\mathrm{CaO}+\mathrm{CO_2}CaCO3​→CaO+CO2​. Use molar masses of 100.0 g mol⁻¹ for calcium carbonate and 44.0 g mol⁻¹ for carbon dioxide.
Show answer and explanation

Answer: C · Worked explanation

The calcium carbonate amount is 5.00/100.0=0.05005.00/100.0=0.05005.00/100.0=0.0500 mol. The equation has a 1:1 ratio, so it forms 0.0500 mol of carbon dioxide, with mass 0.0500×44.0=2.200.0500\times44.0=2.200.0500×44.0=2.20 g. The 4.40 g option results from doubling the product amount despite the 1:1 ratio.
6.

Medium·Determine[2 marks]

Determine the limiting reactant when 0.30 mol of nitrogen reacts with 0.80 mol of hydrogen according to N2+3H2→2NH3\mathrm{N_2}+3\mathrm{H_2}\rightarrow2\mathrm{NH_3}N2​+3H2​→2NH3​.
Show answer and explanation

Answer: C · Worked explanation

The equation requires 3 mol of hydrogen for each 1 mol of nitrogen. Thus 0.30 mol nitrogen needs 0.90 mol hydrogen, but only 0.80 mol is available, so hydrogen is limiting. Comparing the raw mole amounts alone, as in the first option, ignores the equation’s required ratio.
7.

Medium·Calculate[2 marks]

Calculate the atom economy for producing ethanol in C2H4+H2O→C2H5OH\mathrm{C_2H_4}+\mathrm{H_2O}\rightarrow\mathrm{C_2H_5OH}C2​H4​+H2​O→C2​H5​OH, using molar masses of 28.0 g mol⁻¹ for ethene, 18.0 g mol⁻¹ for water and 46.0 g mol⁻¹ for ethanol.
Show answer and explanation

Answer: B · Worked explanation

The equation is balanced, and the reactants have a combined molar mass of 28.0 + 18.0 = 46.0 g mol⁻¹. All of this mass is represented in the desired ethanol, so atom economy is (46.0/46.0)×100%=100%(46.0/46.0)\times100\%=100\%(46.0/46.0)×100%=100%. Dividing the ethanol mass by the ethene mass alone would instead give approximately 164%.
8.

Medium·Calculate[2 marks]

Calculate the volume of hydrogen produced when 0.0150 mol of magnesium reacts with excess hydrochloric acid according to Mg+2HCl→MgCl2+H2\mathrm{Mg}+2\mathrm{HCl}\rightarrow\mathrm{MgCl_2}+\mathrm{H_2}Mg+2HCl→MgCl2​+H2​. Use a molar volume of 22.7 dm³ mol⁻¹ (STP: 273 K, 100 kPa).
Show answer and explanation

Answer: B · Worked explanation

The equation gives a 1:1 ratio of magnesium to hydrogen, so 0.0150 mol of magnesium forms 0.0150 mol of hydrogen. Its volume at STP is 0.0150×22.7=0.3410.0150\times22.7=0.3410.0150×22.7=0.341 dm³. The 0.170 dm³ value halves the amount by using the coefficient of hydrochloric acid instead of the 1:1 ratio.
9.

Medium·Determine[2 marks]

Determine the amount of sodium hydroxide in 20.0 cm³ of a 0.250 mol dm⁻³ solution.
Show answer and explanation

Answer: B · Worked explanation

Convert the volume to dm³: 20.0 cm3=0.0200 dm320.0\,\mathrm{cm^3}=0.0200\,\mathrm{dm^3}20.0cm3=0.0200dm3. Then n=cV=0.250×0.0200=0.00500n=cV=0.250\times0.0200=0.00500n=cV=0.250×0.0200=0.00500 mol. The 0.0500 mol option comes from using a volume ten times too large.
10.

Hard·Determine[2 marks]

A mixture containing 0.24 mol of carbon monoxide and 0.15 mol of oxygen reacts according to 2CO+O2→2CO22\mathrm{CO}+\mathrm{O_2}\rightarrow2\mathrm{CO_2}2CO+O2​→2CO2​. Determine the limiting reactant and theoretical amount of carbon dioxide.
Show answer and explanation

Answer: D · Worked explanation

The 0.24 mol of carbon monoxide requires 0.12 mol of oxygen, and 0.15 mol is available, so oxygen is in excess and carbon monoxide is limiting. The 2:2 ratio means the theoretical amount of carbon dioxide is 0.24 mol. The 0.30 mol option incorrectly assumes all the oxygen reacts, although there is insufficient carbon monoxide to use it all.

Keep going

Next topicR2.2 Rate of chemical changePrevious topicR1.4 Entropy and spontaneity

More in R2 · How much, how fast and how far?

  1. R2.1Amount of chemical changeNotes · 10 questions
  2. R2.2Rate of chemical changeNotes · 10 questions
  3. R2.3Extent of chemical change (equilibrium)Notes · 10 questions

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Balanced equations give ratios between reacting amounts
  2. 2The limiting reactant sets the maximum product amount
  3. 3Percentage yield compares actual product with the maximum
  4. 4Atom economy measures how much reactant becomes useful product
  5. 5Concentration and molar volume provide moles for calculations
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe