Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›S1 Models of the particulate nature of matter
  4. ›S1.3 Electron configurations

IB Chemistry · S1 · Models of the particulate nature of matter

S1.3 Electron configurations

Write electron configurations for atoms up to atomic number 36, explain filling order, and identify valence electrons.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Orbitals organise electrons within shells and subshells
  1. 1Orbitals organise electrons within shells and subshells
  2. 2Electrons usually occupy lower-energy orbitals first
  3. 3Configurations account for every electron in an atom
  4. 4The outermost shell identifies valence electrons
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Orbitals organise electrons within shells and subshells

An orbital is a region where an electron is likely to be found. Orbitals belong to numbered shells, which contain subshells labelled s, p and d. An s subshell has one orbital, a p subshell has three, and a d subshell has five. Each orbital holds at most two electrons. Therefore, s, p and d subshells hold at most two, six and ten electrons respectively. In a configuration, the first number identifies the shell. The letter identifies the subshell, and its superscript gives the electron count. For example, 2p42p^42p4 means four electrons in the p subshell of shell 2.

Key terms · tap one for its definition

orbital

An orbital is a region of high probability for finding an electron and holds at most two electrons.

shells

Shells are numbered sets of orbitals associated with a principal energy level.

Part 1 done

2

Part 2 of 4: Electrons usually occupy lower-energy orbitals first

The filling order follows increasing orbital energy rather than shell number alone. For atoms up to atomic number 36, use 1s1s1s, 2s2s2s, 2p2p2p, 3s3s3s, 3p3p3p, 4s4s4s, 3d3d3d, then 4p4p4p. The 4s4s4s subshell fills before 3d3d3d in this sequence. Within a subshell, electrons occupy separate orbitals before pairing. Paired electrons in one orbital have opposite spins. These rules describe the lowest-energy arrangement, called the ground state. Chromium and copper are exceptions to the straightforward sequence. Their ground-state configurations end in 4s13d54s^1 3d^54s13d5 and 4s13d104s^1 3d^{10}4s13d10 respectively.

Figure 1. The arrows show that 4s fills before 3d in this sequence.

Common mistake

Do not fill 3d3d3d before 4s4s4s when writing configurations for these neutral atoms.

Key term

filling order

Filling order is the sequence in which orbitals receive electrons when forming a ground-state atom.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the electron configuration of a neutral neon atom, which has atomic number 10.
Show answer and explanation

Answer: D · Worked explanation

A neutral neon atom has 10 electrons. Filling the lowest-energy subshells gives two electrons in 1s1s1s, two in 2s2s2s, and the remaining six in 2p2p2p. The option with an electron in 3s3s3s is tempting because it also totals 10 in one case, but 2p2p2p must be filled before 3s3s3s.
3

Part 3 of 4: Configurations account for every electron in an atom

A neutral atom has as many electrons as its atomic number. Write its electron configuration by adding electrons in filling order. Stop when the superscripts total the atomic number. Never exceed a subshell’s capacity. For example, calcium has the configuration 1s22s22p63s23p64s21s^2 2s^2 2p^6 3s^2 3p^6 4s^21s22s22p63s23p64s2. Its superscripts total 20. A noble-gas shorthand replaces completed inner subshells with the symbol of the preceding noble gas in brackets. Calcium can therefore be written [Ar]4s2[\text{Ar}]4s^2[Ar]4s2. Shorthand retains the same electron arrangement.

Worked example

Writing bromine’s configuration

A neutral bromine atom has atomic number 35. Write its full electron configuration.
  1. 1
    Start with 35 electrons.
  2. 2
    Fill through 3p3p3p: 2+2+6+2+6=182+2+6+2+6=182+2+6+2+6=18 electrons.
  3. 3
    Fill 4s4s4s and 3d3d3d: 18+2+10=3018+2+10=3018+2+10=30 electrons.
  4. 4
    Place the remaining 35−30=535-30=535−30=5 electrons in 4p4p4p.

Answer: 1s22s22p63s23p64s23d104p51s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^{10} 4p^51s22s22p63s23p64s23d104p5; total: 35 electrons.

Key terms · tap one for its definition

electron configuration

An electron configuration shows how an atom’s electrons are distributed among its subshells.

noble-gas shorthand

Noble-gas shorthand uses a bracketed noble-gas symbol to represent an atom’s completed inner subshells.

Part 3 done

4

Part 4 of 4: The outermost shell identifies valence electrons

Valence electrons are the electrons in an atom’s outermost occupied shell. To count them, find the highest shell number in its configuration. Add the superscripts for subshells with that number. Bromine has 4s24p54s^2 4p^54s24p5 in shell 4, so it has seven valence electrons. Potassium is [Ar]4s1[\text{Ar}]4s^1[Ar]4s1, so it has one. For transition metals, some ddd electrons can also take part in bonding. The outermost-shell count does not always describe every electron involved in their chemistry. For example, iron is [Ar]4s23d6[\text{Ar}]4s^2 3d^6[Ar]4s23d6. It has two electrons in its outermost shell, while its 3d3d3d electrons can also participate in bonding.

Exam tip

For an outermost-shell count, use the highest shell number, not the last subshell written.

Key term

valence electrons

Valence electrons are the electrons in the outermost occupied shell of an atom.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State the maximum number of electrons in a p subshell.

    Show mark schemeHide mark scheme

    Model answer

    A p subshell holds at most six electrons.

    • 1 mark for stating six electrons
  2. 2.Explain[3 marks]

    Explain how orbital energy and orbital occupancy determine the ground-state filling pattern.

    Show mark schemeHide mark scheme

    Model answer

    Electrons fill lower-energy orbitals first. Each orbital holds at most two electrons, with opposite spins. Within a subshell, electrons occupy separate orbitals before pairing.

    • 1 mark for stating that lower-energy orbitals fill first
    • 1 mark for stating that each orbital holds at most two electrons with opposite spins
    • 1 mark for stating that electrons occupy separate orbitals within a subshell before pairing
  3. 3.Write[3 marks]

    Write the full ground-state electron configuration of a neutral atom with atomic number 30.

    Show mark schemeHide mark scheme

    Model answer

    1s22s22p63s23p64s23d101s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^{10}1s22s22p63s23p64s23d10.

    • 1 mark for writing 1s22s22p61s^2 2s^2 2p^61s22s22p6
    • 1 mark for writing 3s23p64s23s^2 3p^6 4s^23s23p64s2
    • 1 mark for writing 3d103d^{10}3d10, giving 30 electrons overall
  4. 4.State[2 marks]

    State the ground-state configurations of chromium and copper using noble-gas shorthand.

    Show mark schemeHide mark scheme

    Model answer

    Chromium is [Ar]4s13d5[\text{Ar}]4s^1 3d^5[Ar]4s13d5. Copper is [Ar]4s13d10[\text{Ar}]4s^1 3d^{10}[Ar]4s13d10.

    • 1 mark for giving chromium as [Ar]4s13d5[\text{Ar}]4s^1 3d^5[Ar]4s13d5
    • 1 mark for giving copper as [Ar]4s13d10[\text{Ar}]4s^1 3d^{10}[Ar]4s13d10
  5. 5.Determine[3 marks]

    Determine the number of outermost-shell electrons in bromine and iron from their configurations.

    Show mark schemeHide mark scheme

    Model answer

    Bromine has seven: 4s24p54s^2 4p^54s24p5. Iron has two: its outermost shell contains 4s24s^24s2, while 3d63d^63d6 belongs to shell 3.

    • 1 mark for identifying shell 4 as the outermost occupied shell in both atoms
    • 1 mark for giving seven outermost-shell electrons for bromine
    • 1 mark for giving two outermost-shell electrons for iron, excluding its 3d3d3d electrons from that count

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State which subshell fills immediately after 3p3p3p in the filling order used for atoms up to atomic number 36.
Show answer and explanation

Answer: B · Worked explanation

After 3p3p3p, the next subshell in the stated increasing-energy filling order is 4s4s4s, followed by 3d3d3d and then 4p4p4p. Choosing 3d3d3d may seem natural because it belongs to shell 3, but filling order depends on orbital energy rather than shell number alone.
3.

Easy·Identify[1 mark]

An atom has the configuration 1s22s22p63s23p31s^2 2s^2 2p^6 3s^2 3p^31s22s22p63s23p3. Identify its number of valence electrons.
Show answer and explanation

Answer: C · Worked explanation

The highest shell number in the configuration is 3. Its occupied subshells contain 3s23s^23s2 and 3p33p^33p3, giving 2+3=52+3=52+3=5 valence electrons. Counting all the electrons in the atom gives 13, but valence electrons are only those in the outermost occupied shell.
4.

Easy·Identify[1 mark]

Identify the full ground-state electron configuration of a neutral magnesium atom with atomic number 12.
Show answer and explanation

Answer: C · Worked explanation

Magnesium has 12 electrons, and the subshells fill in order to give 2+2+6+2=122+2+6+2=122+2+6+2=12. The configuration with 3p23p^23p2 has the same electron total, but it incorrectly places electrons in 3p3p3p before filling the lower-energy 3s3s3s subshell.
5.

Medium·Determine[2 marks]

A neutral atom has atomic number 24. Determine its ground-state configuration in noble-gas shorthand, accounting for the chromium exception.
Show answer and explanation

Answer: A · Worked explanation

The atom has 24 electrons, so after the 18-electron core represented by [Ar][Ar][Ar], six electrons remain. Chromium is an exception to the straightforward filling pattern and has the ground-state arrangement [Ar]4s13d5[Ar]4s^1 3d^5[Ar]4s13d5. The tempting 4s23d44s^2 3d^44s23d4 arrangement follows the simple sequence but misses this exception.
6.

Medium·Explain[2 marks]

In a ground-state atom, three electrons are being placed into the three orbitals of a p subshell. Explain which arrangement follows the occupancy rule.
Show answer and explanation

Answer: D · Worked explanation

Within a subshell, electrons occupy separate orbitals before pairing, so three electrons first occupy the three p orbitals individually. Each orbital can hold up to two electrons, with paired electrons having opposite spins. Pairing two electrons in one orbital while another p orbital is empty breaks the separate-orbitals-first rule.
7.

Medium·Calculate[2 marks]

A neutral atom has the configuration [Ne]3s23p4[Ne]3s^2 3p^4[Ne]3s23p4. Calculate its number of valence electrons and its total number of electrons.
Show answer and explanation

Answer: C · Worked explanation

The outermost occupied shell is shell 3, which contains 3s23p43s^2 3p^43s23p4, so the valence-electron count is 2+4=62+4=62+4=6. The bracketed neon core represents 10 inner electrons, giving 10+6=1610+6=1610+6=16 electrons in total. Counting only the outermost shell correctly gives six, not the total of 16.
8.

Medium·Determine[2 marks]

A neutral atom has atomic number 35. It has 30 electrons after filling through 3d3d3d. Determine the remaining part of its full electron configuration.
Show answer and explanation

Answer: A · Worked explanation

The atom has 35−30=535-30=535−30=5 electrons left after the 3d3d3d subshell is filled. The next subshell is 4p4p4p, so the remaining configuration is 4p54p^54p5. Putting five electrons into 4s4s4s is not possible because an s subshell holds a maximum of two electrons.
9.

Medium·Deduce[2 marks]

A student writes [Ar]3d24s2[Ar]3d^2 4s^2[Ar]3d24s2 for a neutral atom with 22 electrons. Deduce the change needed to put the configuration in the filling order used for these atoms.
Show answer and explanation

Answer: B · Worked explanation

The configuration accounts for 22 electrons, but the filling order places 4s4s4s before 3d3d3d. Reordering the subshells gives [Ar]4s23d2[Ar]4s^2 3d^2[Ar]4s23d2 without changing the electron arrangement. The idea that all shell-3 subshells must fill before shell 4 is the tempting misconception; orbital energy determines the order.
10.

Hard·Determine[2 marks]

A neutral atom has 29 electrons. A student fills subshells strictly in the usual sequence and obtains [Ar]4s23d9[Ar]4s^2 3d^9[Ar]4s23d9. Determine the ground-state configuration, accounting for the copper exception.
Show answer and explanation

Answer: D · Worked explanation

The 18 electrons in [Ar][Ar][Ar] leave 11 electrons to place in 4s4s4s and 3d3d3d. Copper is an exception to the straightforward sequence, and its ground state is [Ar]4s13d10[Ar]4s^1 3d^{10}[Ar]4s13d10, which still totals 29 electrons. The tempting 4s23d94s^2 3d^94s23d9 is the unadjusted sequence rather than copper’s ground-state configuration.

Keep going

Next topicS1.4 The molePrevious topicS1.2 The nuclear atom

More in S1 · Models of the particulate nature of matter

  1. S1.1Particulate nature of matterNotes · 10 questions
  2. S1.2The nuclear atomNotes · 10 questions
  3. S1.3Electron configurationsNotes · 10 questions
  4. S1.4The moleNotes · 10 questions
  5. S1.5Ideal gasesNotes · 10 questions

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Orbitals organise electrons within shells and subshells
  2. 2Electrons usually occupy lower-energy orbitals first
  3. 3Configurations account for every electron in an atom
  4. 4The outermost shell identifies valence electrons
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe