Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Chemistry
  3. ›S1 Models of the particulate nature of matter
  4. ›S1.5 Ideal gases

IB Chemistry · S1 · Models of the particulate nature of matter

S1.5 Ideal gases

State the ideal gas assumptions, convert gas units, and calculate pressure, volume, temperature or amount.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Ideal gas particles follow a simple model
  1. 1Ideal gas particles follow a simple model
  2. 2The ideal gas equation connects four measurable quantities
  3. 3Consistent units make gas calculations reliable
  4. 4Rearrange the equation to find an unknown quantity
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Ideal gas particles follow a simple model

An ideal gas is a model with particles that move constantly and randomly. Each particle is treated as having negligible volume compared with the container. The model also assumes no intermolecular forces between particles, except during collisions. Particles collide with each other and the container walls. These collisions are perfectly elastic, so total kinetic energy is conserved in each collision.

Pressure results from particles colliding with the walls. The particles’ average kinetic energy depends only on absolute temperature. Real gases approach ideal behaviour at low pressure and high temperature. Their particles are then far apart, making particle volume and intermolecular attractions less significant.

Common mistake

Ideal gas particles are not motionless between collisions. They travel freely until another collision changes their motion.

Key terms · tap one for its definition

ideal gas

An ideal gas is a model whose particles obey the stated assumptions about size, forces, motion and collisions.

negligible volume

Negligible volume means particle volume is treated as insignificant compared with the volume occupied by the gas.

no intermolecular forces

No intermolecular forces means ideal gas particles do not attract or repel one another between collisions.

Part 1 done

2

Part 2 of 4: The ideal gas equation connects four measurable quantities

The ideal gas equation is pV=nRTpV=nRTpV=nRT. Here, ppp is pressure, VVV is volume, nnn is amount and TTT is absolute temperature. The gas constant RRR links these quantities. Its numerical value depends on the units chosen. For pressure in pascals and volume in cubic metres, use R=8.31 J K−1 mol−1R=8.31\,\mathrm{J\,K^{-1}\,mol^{-1}}R=8.31JK−1mol−1.

Rearrange the equation before substituting values. For example, V=nRTpV=\frac{nRT}{p}V=pnRT​ and T=pVnRT=\frac{pV}{nR}T=nRpV​. Temperature must be in kelvin, not degrees Celsius. This equation describes ideal behaviour; a real gas may give a different result, especially at high pressure or low temperature.

At standard temperature and pressure (STP), the temperature is 273 K and pressure is 100 kPa. For one mole, V=nRTp=(1 mol)(8.31 J K−1 mol−1)(273 K)100 000 Pa≈0.0227 m3=22.7 dm3V=\frac{nRT}{p}=\frac{(1\,\mathrm{mol})(8.31\,\mathrm{J\,K^{-1}\,mol^{-1}})(273\,\mathrm{K})}{100\,000\,\mathrm{Pa}}\approx0.0227\,\mathrm{m^3}=22.7\,\mathrm{dm^3}V=pnRT​=100000Pa(1mol)(8.31JK−1mol−1)(273K)​≈0.0227m3=22.7dm3. Thus, the molar volume at STP is 22.7 dm3 mol−122.7\,\mathrm{dm^3\,mol^{-1}}22.7dm3mol−1.

Figure 1. Change pressure, volume or temperature while the amount stays fixed. Notice how the remaining quantity responds.

Key terms · tap one for its definition

ideal gas equation

The ideal gas equation relates gas pressure, volume, amount and absolute temperature through pV=nRTpV=nRTpV=nRT.

gas constant

The gas constant RRR is the proportionality constant in pV=nRTpV=nRTpV=nRT; its units depend on the chosen pressure and volume units.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify an assumption of the ideal gas model.
Show answer and explanation

Answer: C · Worked explanation

The ideal gas model treats particle volume as negligible compared with the volume occupied by the gas. The tempting idea that particles attract one another between collisions is not an ideal gas assumption; the model assumes there are no intermolecular forces between particles except during collisions.
3

Part 3 of 4: Consistent units make gas calculations reliable

A pascal (Pa) is the SI unit of pressure. Convert kilopascals to pascals by multiplying by 1000. A cubic metre (m3\mathrm{m^3}m3) is the SI unit of volume. One cubic metre equals 1000 litres; one litre equals 10−3 m310^{-3}\,\mathrm{m^3}10−3m3. A kelvin (K) is the unit of absolute temperature. Convert degrees Celsius to kelvin using T(K)=t(°C)+273.15T(\mathrm{K})=t(°\mathrm{C})+273.15T(K)=t(°C)+273.15.

Another consistent choice is pressure in kilopascals and volume in litres. For these units, R=8.31 kPa L mol−1 K−1R=8.31\,\mathrm{kPa\,L\,mol^{-1}\,K^{-1}}R=8.31kPaLmol−1K−1. The numerical value matches because one kilopascal litre equals one joule. Always match the pressure and volume units to the stated value of RRR.

Exam tip

Write the converted values beside the equation before calculating. This makes a mismatched unit easier to spot.

Key terms · tap one for its definition

pascal

The pascal (Pa) is the SI unit of pressure, equal to one newton per square metre.

cubic metre

The cubic metre (m3\mathrm{m^3}m3) is the SI unit of volume and equals 1000 litres.

kelvin

The kelvin (K) is the unit of absolute temperature used in the ideal gas equation.

Part 3 done

4

Part 4 of 4: Rearrange the equation to find an unknown quantity

To find amount of gas, use n=pVRTn=\frac{pV}{RT}n=RTpV​. To find pressure, use p=nRTVp=\frac{nRT}{V}p=VnRT​. Choose one consistent set of units, then substitute all known values. Check that the answer has a sensible unit. Use pascals for pressure, cubic metres for volume, kelvin for temperature or moles for amount. When using gas measurements, remember that the result relies on the ideal gas model.

Worked example

Finding the amount of gas

A gas occupies 2.00 L at 100 kPa and 27.0 °C. Calculate its amount using R=8.31 kPa L mol−1 K−1R=8.31\,\mathrm{kPa\,L\,mol^{-1}\,K^{-1}}R=8.31kPaLmol−1K−1.
  1. 1
    Convert temperature: T=27.0+273.15=300.15 KT=27.0+273.15=300.15\,\mathrm{K}T=27.0+273.15=300.15K.
  2. 2
    Rearrange: n=pVRTn=\frac{pV}{RT}n=RTpV​.
  3. 3
    Substitute: n=(100 kPa)(2.00 L)(8.31 kPa L mol−1 K−1)(300.15 K)n=\frac{(100\,\mathrm{kPa})(2.00\,\mathrm{L})}{(8.31\,\mathrm{kPa\,L\,mol^{-1}\,K^{-1}})(300.15\,\mathrm{K})}n=(8.31kPaLmol−1K−1)(300.15K)(100kPa)(2.00L)​.
  4. 4
    Calculate: n=0.0802 moln=0.0802\,\mathrm{mol}n=0.0802mol.

Answer: The amount of gas is 0.0802 mol0.0802\,\mathrm{mol}0.0802mol.

The same method works for any unknown in the equation. First rearrange, then convert units, substitute and calculate. Keep extra digits during working, and round only the final answer.

Key term

amount of gas

Amount of gas, nnn, measures the quantity of gas particles in moles.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State three assumptions about particles in the ideal gas model.

    Show mark schemeHide mark scheme

    Model answer

    Particles have negligible volume and experience no intermolecular forces between collisions. Their collisions are perfectly elastic.

    • 1 mark for stating that particle volume is negligible compared with container volume
    • 1 mark for stating that particles experience no intermolecular forces between collisions
    • 1 mark for stating that collisions are perfectly elastic
  2. 2.Explain[2 marks]

    Explain why real gases approach ideal behaviour at low pressure and high temperature.

    Show mark schemeHide mark scheme

    Model answer

    At low pressure, particles are far apart, so their own volume matters less. At high temperature, intermolecular attractions have less effect on their motion.

    • 1 mark for explaining that greater particle separation makes particle volume less significant
    • 1 mark for explaining that intermolecular attractions have less effect at high temperature
  3. 3.Calculate[3 marks]

    Calculate the amount of gas occupying 3.00 L at 200 kPa and 300 K. Use R=8.31 kPa L mol−1 K−1R=8.31\,\mathrm{kPa\,L\,mol^{-1}\,K^{-1}}R=8.31kPaLmol−1K−1.

    Show mark schemeHide mark scheme

    Model answer

    Using n=pVRTn=\frac{pV}{RT}n=RTpV​, n=(200)(3.00)(8.31)(300)=0.241 moln=\frac{(200)(3.00)}{(8.31)(300)}=0.241\,\mathrm{mol}n=(8.31)(300)(200)(3.00)​=0.241mol.

    • 1 mark for rearranging the equation to n=pVRTn=\frac{pV}{RT}n=RTpV​
    • 1 mark for substituting the values consistently into the rearranged equation
    • 1 mark for calculating 0.241 mol0.241\,\mathrm{mol}0.241mol
  4. 4.Calculate[2 marks]

    Calculate the temperature in kelvin corresponding to 25.0 °C.

    Show mark schemeHide mark scheme

    Model answer

    T=25.0+273.15=298.15 KT=25.0+273.15=298.15\,\mathrm{K}T=25.0+273.15=298.15K.

    • 1 mark for adding 273.15 to the temperature in degrees Celsius
    • 1 mark for giving 298.15 K298.15\,\mathrm{K}298.15K
  5. 5.Calculate[3 marks]

    Calculate the pressure of 0.500 mol of ideal gas in 0.0100 m3\mathrm{m^3}m3 at 300 K. Use R=8.31 J K−1 mol−1R=8.31\,\mathrm{J\,K^{-1}\,mol^{-1}}R=8.31JK−1mol−1.

    Show mark schemeHide mark scheme

    Model answer

    p=nRTV=(0.500)(8.31)(300)0.0100=124650 Pap=\frac{nRT}{V}=\frac{(0.500)(8.31)(300)}{0.0100}=124650\,\mathrm{Pa}p=VnRT​=0.0100(0.500)(8.31)(300)​=124650Pa, or 125 kPa125\,\mathrm{kPa}125kPa to three significant figures.

    • 1 mark for rearranging the equation to p=nRTVp=\frac{nRT}{V}p=VnRT​
    • 1 mark for substituting the given values with consistent SI units
    • 1 mark for calculating approximately 1.25×105 Pa1.25\times10^5\,\mathrm{Pa}1.25×105Pa

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State how ideal gas particles move between collisions.
Show answer and explanation

Answer: D · Worked explanation

Ideal gas particles are in constant random motion and travel freely until a collision changes their motion. The idea that they stay still between collisions confuses the absence of intermolecular forces with an absence of particle motion.
3.

Easy·Identify[1 mark]

Identify the temperature scale that must be used in the ideal gas equation.
Show answer and explanation

Answer: C · Worked explanation

The ideal gas equation uses absolute temperature, which is measured in kelvin. Substituting a temperature in degrees Celsius directly would give an incorrect result because the Celsius scale does not start at absolute zero.
4.

Easy·Identify[1 mark]

Which equation gives the amount of an ideal gas when its pressure, volume and absolute temperature are known?
Show answer and explanation

Answer: D · Worked explanation

Rearranging pV=nRTpV=nRTpV=nRT to make nnn the subject gives n=pVRTn=\frac{pV}{RT}n=RTpV​. The expression RTpV\frac{RT}{pV}pVRT​ reverses the ratio and does not follow from rearranging the ideal gas equation.
5.

Medium·Calculate[2 marks]

A sample contains 0.250 mol0.250\,\text{mol}0.250mol of ideal gas at 310 K310\,\text{K}310K and 150 kPa150\,\text{kPa}150kPa. Calculate its volume using R=8.31 kPa L mol−1K−1R=8.31\,\text{kPa L mol}^{-1}\text{K}^{-1}R=8.31kPa L mol−1K−1.
Show answer and explanation

Answer: A · Worked explanation

Use V=nRTpV=\frac{nRT}{p}V=pnRT​, giving V=(0.250)(8.31)(310)150=4.29 LV=\frac{(0.250)(8.31)(310)}{150}=4.29\,\text{L}V=150(0.250)(8.31)(310)​=4.29L. The tempting value 0.429 L0.429\,\text{L}0.429L results from a factor-of-ten arithmetic or substitution error; the stated pressure and volume units match the chosen value of RRR.
6.

Medium·Calculate[2 marks]

An ideal gas sample has an amount of 0.0400 mol0.0400\,\text{mol}0.0400mol, a volume of 2.50 L2.50\,\text{L}2.50L and a temperature of 298 K298\,\text{K}298K. Calculate its pressure using R=8.31 kPa L mol−1K−1R=8.31\,\text{kPa L mol}^{-1}\text{K}^{-1}R=8.31kPa L mol−1K−1.
Show answer and explanation

Answer: A · Worked explanation

Rearrange to p=nRTVp=\frac{nRT}{V}p=VnRT​, then substitute: p=(0.0400)(8.31)(298)2.50=39.6 kPap=\frac{(0.0400)(8.31)(298)}{2.50}=39.6\,\text{kPa}p=2.50(0.0400)(8.31)(298)​=39.6kPa.
7.

Medium·Convert[1 mark]

Convert a gas volume of 2.40 L2.40\,\text{L}2.40L to cubic metres.
Show answer and explanation

Answer: A · Worked explanation

Since 1 L=10−3 m31\,\text{L}=10^{-3}\,\text{m}^31L=10−3m3, multiply 2.40 L2.40\,\text{L}2.40L by 10−310^{-3}10−3 to obtain 2.40×10−3 m32.40\times10^{-3}\,\text{m}^32.40×10−3m3. The value 0.240 m30.240\,\text{m}^30.240m3 is too large by a factor of 100 because it uses the wrong conversion scale.
8.

Medium·Determine[2 marks]

An ideal gas has a pressure of 120 kPa120\,\text{kPa}120kPa, a volume of 1.50 L1.50\,\text{L}1.50L and an amount of 0.0600 mol0.0600\,\text{mol}0.0600mol. Determine its temperature using R=8.31 kPa L mol−1K−1R=8.31\,\text{kPa L mol}^{-1}\text{K}^{-1}R=8.31kPa L mol−1K−1.
Show answer and explanation

Answer: B · Worked explanation

Use T=pVnRT=\frac{pV}{nR}T=nRpV​, so T=(120)(1.50)(0.0600)(8.31)=361 KT=\frac{(120)(1.50)}{(0.0600)(8.31)}=361\,\text{K}T=(0.0600)(8.31)(120)(1.50)​=361K to three significant figures. The tempting value 361 ∘C361\,^{\circ}\text{C}361∘C has the same number but the wrong unit: the equation gives absolute temperature in kelvin.
9.

Medium·Calculate[2 marks]

A gas occupies 750 mL750\,\text{mL}750mL at 98.0 kPa98.0\,\text{kPa}98.0kPa and 20.0 ∘C20.0\,^{\circ}\text{C}20.0∘C. Calculate the amount of gas using R=8.31 kPa L mol−1K−1R=8.31\,\text{kPa L mol}^{-1}\text{K}^{-1}R=8.31kPa L mol−1K−1.
Show answer and explanation

Answer: D · Worked explanation

Convert first: 750 mL=0.750 L750\,\text{mL}=0.750\,\text{L}750mL=0.750L and 20.0 ∘C=293.15 K20.0\,^{\circ}\text{C}=293.15\,\text{K}20.0∘C=293.15K. Then n=pVRT=(98.0)(0.750)(8.31)(293.15)=0.0302 moln=\frac{pV}{RT}=\frac{(98.0)(0.750)}{(8.31)(293.15)}=0.0302\,\text{mol}n=RTpV​=(8.31)(293.15)(98.0)(0.750)​=0.0302mol. The tempting value 30.2 mol30.2\,\text{mol}30.2mol comes from mishandling the volume conversion.
10.

Hard·Determine[2 marks]

A sample contains 0.120 mol0.120\,\text{mol}0.120mol of ideal gas in a 3.00 L3.00\,\text{L}3.00L container at 27.0 ∘C27.0\,^{\circ}\text{C}27.0∘C. Determine its pressure in pascals, using R=8.31 J mol−1K−1R=8.31\,\text{J mol}^{-1}\text{K}^{-1}R=8.31J mol−1K−1.
Show answer and explanation

Answer: B · Worked explanation

Convert 3.00 L3.00\,\text{L}3.00L to 0.00300 m30.00300\,\text{m}^30.00300m3 and 27.0 ∘C27.0\,^{\circ}\text{C}27.0∘C to 300.15 K300.15\,\text{K}300.15K. Then p=nRTV=(0.120)(8.31)(300.15)0.00300=9.98×104 Pap=\frac{nRT}{V}=\frac{(0.120)(8.31)(300.15)}{0.00300}=9.98\times10^{4}\,\text{Pa}p=VnRT​=0.00300(0.120)(8.31)(300.15)​=9.98×104Pa. The tempting value 9.98×101 Pa9.98\times10^{1}\,\text{Pa}9.98×101Pa comes from leaving the volume in litres while using the SI value of RRR.

Keep going

Next topicS2.1 The ionic modelPrevious topicS1.4 The mole

More in S1 · Models of the particulate nature of matter

  1. S1.1Particulate nature of matterNotes · 10 questions
  2. S1.2The nuclear atomNotes · 10 questions
  3. S1.3Electron configurationsNotes · 10 questions
  4. S1.4The moleNotes · 10 questions
  5. S1.5Ideal gasesNotes · 10 questions

All IB Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/4 read

  1. 1Ideal gas particles follow a simple model
  2. 2The ideal gas equation connects four measurable quantities
  3. 3Consistent units make gas calculations reliable
  4. 4Rearrange the equation to find an unknown quantity
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe