Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Analysis and Approaches
  3. ›3 Geometry and trigonometry
  4. ›3.1 3D distance, volume and surface area

IB Mathematics: Analysis and Approaches · Topic 3 · Geometry and trigonometry

3.1 3D distance, volume and surface area

Calculate distances and midpoints in three dimensions, and use volume and surface area formulas for prisms, pyramids, cylinders, cones and spheres.

  • 5 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Pythagoras’ theorem extends to distances in three dimensions
  1. 1Pythagoras’ theorem extends to distances in three dimensions
  2. 2Volume measures the space inside a solid
  3. 3Cylinders, cones and spheres have their own formulas
  4. 4Surface area adds the areas of every outer face
  5. 5Real problems combine solids and need consistent units
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Pythagoras’ theorem extends to distances in three dimensions

Picture a box-shaped room. The longest straight line inside it runs from one floor corner to the opposite ceiling corner. You can find its length by using Pythagoras’ theorem twice.

Points in space are written (x,y,z)(x,y,z)(x,y,z). The distance between (x1,y1,z1)(x_1,y_1,z_1)(x1​,y1​,z1​) and (x2,y2,z2)(x_2,y_2,z_2)(x2​,y2​,z2​) uses the squared difference in each coordinate: d=(x2−x1)2+(y2−y1)2+(z2−z1)2d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2+(z_2-z_1)^2}d=(x2​−x1​)2+(y2​−y1​)2+(z2​−z1​)2​.

Worked example

Distance and midpoint

Find the distance between P(1,2,3)P(1,2,3)P(1,2,3) and Q(5,−2,5)Q(5,-2,5)Q(5,−2,5), and the midpoint of PQPQPQ.
  1. 1
    Find the differences: 5−1=45-1=45−1=4, −2−2=−4-2-2=-4−2−2=−4 and 5−3=25-3=25−3=2.
  2. 2
    Substitute: d=42+(−4)2+22=16+16+4d=\sqrt{4^2+(-4)^2+2^2}=\sqrt{16+16+4}d=42+(−4)2+22​=16+16+4​.
  3. 3
    Evaluate: d=36=6d=\sqrt{36}=6d=36​=6.
  4. 4
    Midpoint: (1+52,2+(−2)2,3+52)=(3,0,4)\left(\frac{1+5}{2},\frac{2+(-2)}{2},\frac{3+5}{2}\right)=(3,0,4)(21+5​,22+(−2)​,23+5​)=(3,0,4).

Answer: The distance is 6 units and the midpoint is (3,0,4)(3,0,4)(3,0,4).

The midpoint lies halfway along the segment. Its coordinates are the means of the endpoint coordinates: (x1+x22,y1+y22,z1+z22)\left(\frac{x_1+x_2}{2},\frac{y_1+y_2}{2},\frac{z_1+z_2}{2}\right)(2x1​+x2​​,2y1​+y2​​,2z1​+z2​​).

Exam tip

Squaring removes minus signs, so the order of the two points does not matter. Take care with negative coordinates, because subtracting -2 adds 2.

Key terms · tap one for its definition

distance

The distance between two points is the length of the straight line segment joining them.

midpoint

The midpoint of a line segment is the point on it that is equally far from both endpoints.

Part 1 done

2

Part 2 of 5: Volume measures the space inside a solid

Now consider how much space a solid holds. A prism has the same cross-section along its whole length. A box and a triangular tent are both prisms.

The volume of a prism is the area of the cross-section multiplied by the length. Write the cross-section area as AAA and the length as hhh. Then V=AhV=AhV=Ah.

A pyramid narrows from a base to a single point. Its volume is one third of the matching prism: V=13AhV=\frac{1}{3}AhV=31​Ah, where hhh is the perpendicular height.

Worked example

Volume of a pyramid

A pyramid has a square base of side 6 cm and perpendicular height 5 cm. Find its volume.
  1. 1
    The base area is A=6×6=36 cm2A=6\times6=36\,\mathrm{cm^2}A=6×6=36cm2.
  2. 2
    Substitute: V=13×36×5V=\frac{1}{3}\times36\times5V=31​×36×5.
  3. 3
    Evaluate: V=60V=60V=60.

Answer: The volume is 60 cm360\,\mathrm{cm^3}60cm3.

Common mistake

The height in a pyramid formula is the perpendicular height from base to apex. It is not the length along a sloping face.

Go deeperWhy a pyramid takes one third

A cube can be cut into three identical square pyramids that meet at one corner. Each has the cube’s face as its base and the cube’s side length as its height.

The cube has volume s3s^3s3, so each pyramid has volume 13s3=13×s2×s\frac{1}{3}s^3=\frac13\times s^2\times s31​s3=31​×s2×s. This matches V=13AhV=\frac{1}{3}AhV=31​Ah.

Key terms · tap one for its definition

prism

A prism is a solid whose cross-section is the same along its whole length.

volume

The volume of a solid is the amount of three-dimensional space it occupies, measured in cubic units such as cm3\mathrm{cm^3}cm3.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate the distance between the points (0,0,0)(0,0,0)(0,0,0) and (2,3,6)(2,3,6)(2,3,6).
Show answer and explanation

Answer: A · Worked explanation

The distance is 22+32+62=4+9+36=49=7\sqrt{2^2+3^2+6^2}=\sqrt{4+9+36}=\sqrt{49}=722+32+62​=4+9+36​=49​=7 units. The value 49 comes from forgetting the final square root. The value 11 comes from adding the coordinates instead of squaring them first, which does not give a distance. Squaring each difference first keeps every term positive, so the sum under the root is never negative.
3

Part 3 of 5: Cylinders, cones and spheres have their own formulas

Curved solids follow the same idea, with circles as cross-sections. A cylinder is a prism with a circular cross-section, so V=πr2hV=\pi r^2hV=πr2h.

A cone has a circular base and a curved surface rising to one point. Its volume is one third of the cylinder with the same base and height. A sphere is perfectly round, and every point on it is the same distance from the centre.

Formulas for curved solids, with radius rrr and perpendicular height hhh

SolidVolumeCurved surface area
Cylinderπr2h\pi r^2hπr2h2πrh2\pi rh2πrh
Cone13πr2h\frac13\pi r^2h31​πr2hπrl\pi rlπrl
Sphere43πr3\frac43\pi r^334​πr34πr24\pi r^24πr2
Solid
Cylinder
Volume
πr2h\pi r^2hπr2h
Curved surface area
2πrh2\pi rh2πrh
Solid
Cone
Volume
13πr2h\frac13\pi r^2h31​πr2h
Curved surface area
πrl\pi rlπrl
Solid
Sphere
Volume
43πr3\frac43\pi r^334​πr3
Curved surface area
4πr24\pi r^24πr2

In the sphere formula, cube only the radius. Then multiply by 43π\frac43\pi34​π.

A sphere needs only its radius, because it has no separate height. The cone entry uses lll, the slant height, which the next section explains.

Key terms · tap one for its definition

cone

A cone is a solid with a circular base and a curved surface that rises to a single point called the apex.

sphere

A sphere is the set of all points in space at a fixed distance, the radius, from a fixed centre.

Part 3 done

4

Part 4 of 5: Surface area adds the areas of every outer face

Volume counts the space inside, so now look at the outside. The surface area of a solid is the total area of its outer faces. For a cylinder, the curved part unrolls into a rectangle.

That rectangle has width 2πr2\pi r2πr and height hhh, which gives the curved area 2πrh2\pi rh2πrh. Adding two circular ends gives the total: 2πr2+2πrh2\pi r^2+2\pi rh2πr2+2πrh.

Figure 1. The height h is perpendicular to the base. The slant height l runs along the surface, so l is longer than h.

A cone’s curved surface unrolls into a sector. Its area is πrl\pi rlπrl, where the slant height lll is found from l2=r2+h2l^2=r^2+h^2l2=r2+h2. A closed cone has total area πr2+πrl\pi r^2+\pi rlπr2+πrl, and a sphere has 4πr24\pi r^24πr2.

Worked example

Surface area of a cone

A closed cone has radius 3 cm and perpendicular height 4 cm. Find its total surface area.
  1. 1
    Find the slant height: l=32+42=5 cml=\sqrt{3^2+4^2}=5\,\mathrm{cm}l=32+42​=5cm.
  2. 2
    Curved area: πrl=π×3×5=15π\pi rl=\pi\times3\times5=15\piπrl=π×3×5=15π.
  3. 3
    Base area: πr2=9π\pi r^2=9\piπr2=9π.
  4. 4
    Total: 15π+9π=24π≈75.415\pi+9\pi=24\pi\approx75.415π+9π=24π≈75.4.

Answer: The total surface area is approximately 75.4 cm275.4\,\mathrm{cm^2}75.4cm2.

Key terms · tap one for its definition

surface area

The surface area of a solid is the total area of all its outer faces, measured in square units such as cm2\mathrm{cm^2}cm2.

slant height

The slant height of a cone is the distance from its apex to a point on the edge of its base, measured along the surface.

Part 4 done

Quick check

One question on the part you just read

Easy

State the volume of a sphere of radius rrr.
Show answer and explanation

Answer: B · Worked explanation

A sphere of radius rrr has volume 43πr3\frac43\pi r^334​πr3. The expression 4πr24\pi r^24πr2 is tempting because it is also a sphere formula, but it gives surface area, which is measured in square units rather than cubic units. The radius must be cubed in a volume.
5

Part 5 of 5: Real problems combine solids and need consistent units

Break a composite solid into parts whose formulas you know. Add volumes directly. For surface areas, first check which faces are hidden inside the solid.

Many objects are made of more than one solid. A hemisphere is half a sphere. Its volume is 23πr3\frac23\pi r^332​πr3, and its curved surface area is 2πr22\pi r^22πr2.

Worked example

A composite solid

A solid is a cylinder of radius 5 cm and height 12 cm, with a hemisphere of radius 5 cm on top. Find its volume.
  1. 1
    Cylinder: π×52×12=300π\pi\times5^2\times12=300\piπ×52×12=300π.
  2. 2
    Hemisphere: 23π×53=250π3\frac23\pi\times5^3=\frac{250\pi}{3}32​π×53=3250π​.
  3. 3
    Add: 300π+250π3=1150π3≈1204300\pi+\frac{250\pi}{3}=\frac{1150\pi}{3}\approx1204300π+3250π​=31150π​≈1204.

Answer: The volume is approximately 1.20×103 cm31.20\times10^3\,\mathrm{cm^3}1.20×103cm3 (3 s.f.).

A hemisphere also has a flat circular face. Include it only when the solid is closed. A closed hemisphere has total surface area 2πr2+πr2=3πr22\pi r^2+\pi r^2=3\pi r^22πr2+πr2=3πr2.

Use one length unit throughout before you calculate. Convert at the end if the answer needs a different unit.

Common mistake

Since 1 dm=10 cm1\,\mathrm{dm}=10\,\mathrm{cm}1dm=10cm, a volume conversion cubes the factor: 1 dm3=1000 cm31\,\mathrm{dm^3}=1000\,\mathrm{cm^3}1dm3=1000cm3. Dividing by 10 or 100 gives a wrong answer.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the formula for the volume of a cone and the formula for the volume of a sphere, using radius rrr and perpendicular height hhh.

    Show mark schemeHide mark scheme

    Model answer

    Cone: V=13πr2hV=\frac13\pi r^2hV=31​πr2h. Sphere: V=43πr3V=\frac43\pi r^3V=34​πr3.

    • 1 mark for stating V=13πr2hV=\frac13\pi r^2hV=31​πr2h for the cone
    • 1 mark for stating V=43πr3V=\frac43\pi r^3V=34​πr3 for the sphere
  2. 2.Calculate[3 marks]

    Calculate the distance between P(2,−1,4)P(2,-1,4)P(2,−1,4) and Q(5,3,16)Q(5,3,16)Q(5,3,16).

    Show mark schemeHide mark scheme

    Model answer

    d=(5−2)2+(3−(−1))2+(16−4)2=9+16+144=169=13d=\sqrt{(5-2)^2+(3-(-1))^2+(16-4)^2}=\sqrt{9+16+144}=\sqrt{169}=13d=(5−2)2+(3−(−1))2+(16−4)2​=9+16+144​=169​=13 units.

    • 1 mark for finding the coordinate differences 3, 4 and 12
    • 1 mark for substituting into the distance formula
    • 1 mark for obtaining d=13d=13d=13
  3. 3.Calculate[3 marks]

    Calculate the total surface area of a closed cylinder of radius 3 cm and height 7 cm.

    Show mark schemeHide mark scheme

    Model answer

    Area =2πr2+2πrh=2π(9)+2π(3)(7)=18π+42π=60π≈188 cm2=2\pi r^2+2\pi rh=2\pi(9)+2\pi(3)(7)=18\pi+42\pi=60\pi\approx188\,\mathrm{cm^2}=2πr2+2πrh=2π(9)+2π(3)(7)=18π+42π=60π≈188cm2.

    • 1 mark for using 2πr2+2πrh2\pi r^2+2\pi rh2πr2+2πrh
    • 1 mark for substituting r=3r=3r=3 and h=7h=7h=7 correctly
    • 1 mark for obtaining 60π≈188 cm260\pi\approx188\,\mathrm{cm^2}60π≈188cm2
  4. 4.Distinguish[2 marks]

    Distinguish between the perpendicular height and the slant height of a cone.

    Show mark schemeHide mark scheme

    Model answer

    The perpendicular height is measured from the apex straight down to the centre of the base. The slant height is measured along the sloping surface from the apex to the base edge, and it is longer.

    • 1 mark for describing the perpendicular height as the straight-down distance from apex to the base centre
    • 1 mark for describing the slant height as the distance along the surface from apex to base edge
  5. 5.Determine[3 marks]

    Determine the radius of a sphere with volume 36π cm336\pi\,\mathrm{cm^3}36πcm3.

    Show mark schemeHide mark scheme

    Model answer

    43πr3=36π\frac43\pi r^3=36\pi34​πr3=36π, so r3=27r^3=27r3=27 and r=3 cmr=3\,\mathrm{cm}r=3cm.

    • 1 mark for setting 43πr3=36π\frac43\pi r^3=36\pi34​πr3=36π
    • 1 mark for obtaining r3=27r^3=27r3=27
    • 1 mark for obtaining r=3 cmr=3\,\mathrm{cm}r=3cm
  6. 6.Explain[2 marks]

    Explain why 1 dm31\,\mathrm{dm^3}1dm3 equals 1000 cm31000\,\mathrm{cm^3}1000cm3.

    Show mark schemeHide mark scheme

    Model answer

    One decimetre is 10 cm. Volume involves three lengths, so 10×10×10=100010\times10\times10=100010×10×10=1000.

    • 1 mark for stating that 1 dm=10 cm1\,\mathrm{dm}=10\,\mathrm{cm}1dm=10cm
    • 1 mark for explaining that volume cubes the length factor, giving 1000

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Determine[1 mark]

Determine the midpoint of the segment joining (2,4,−6)(2,4,-6)(2,4,−6) and (8,0,2)(8,0,2)(8,0,2).
Show answer and explanation

Answer: C · Worked explanation

Average each coordinate: 2+82=5\frac{2+8}{2}=522+8​=5, 4+02=2\frac{4+0}{2}=224+0​=2 and −6+22=−2\frac{-6+2}{2}=-22−6+2​=−2. The point (10,4,−4)(10,4,-4)(10,4,−4) comes from adding the coordinates without halving. The point (3,−2,4)(3,-2,4)(3,−2,4) comes from halving the differences, which gives a vector offset, not the midpoint. A quick check is that the midpoint lies between the endpoints in every coordinate, and 5, 2 and -2 all do.
4.

Medium·Calculate[2 marks]

Calculate the volume of a cylinder of radius 4 cm and height 10 cm.
Show answer and explanation

Answer: D · Worked explanation

The volume is πr2h=π×16×10=160π≈503 cm3\pi r^2h=\pi\times16\times10=160\pi\approx503\,\mathrm{cm^3}πr2h=π×16×10=160π≈503cm3. The value 168 comes from wrongly including the factor 13\frac1331​, which belongs to cones and pyramids. The value 251 comes from using the curved area formula 2πrh2\pi rh2πrh instead of a volume. Check that the answer is in cubic units, as every volume must be.
5.

Medium[2 marks]

A cone has radius 5 cm and slant height 13 cm. Calculate its volume.
Show answer and explanation

Answer: B · Worked explanation

First find the perpendicular height: h=132−52=12 cmh=\sqrt{13^2-5^2}=12\,\mathrm{cm}h=132−52​=12cm. Then V=13π×25×12=100π≈314 cm3V=\frac13\pi\times25\times12=100\pi\approx314\,\mathrm{cm^3}V=31​π×25×12=100π≈314cm3. The value 340 comes from using the slant height 13 in place of the perpendicular height. The value 942 comes from leaving out the factor 13\frac1331​. Check the working by confirming that 5, 12 and 13 form a right-angled triangle, since 25+144=16925+144=16925+144=169.
6.

Medium[2 marks]

A sphere has volume 288π cm3288\pi\,\mathrm{cm^3}288πcm3. Calculate its surface area.
Show answer and explanation

Answer: D · Worked explanation

Solve 43πr3=288π\frac43\pi r^3=288\pi34​πr3=288π to get r3=216r^3=216r3=216, so r=6 cmr=6\,\mathrm{cm}r=6cm. Then the surface area is 4πr2=4π×36=144π≈452 cm24\pi r^2=4\pi\times36=144\pi\approx452\,\mathrm{cm^2}4πr2=4π×36=144π≈452cm2. The value 905 is the volume 288π288\pi288π itself, which is not an area. The value 226 comes from using 2πr22\pi r^22πr2. Work out the radius first, because the surface area formula needs rrr rather than the volume.
7.

Medium[2 marks]

A cone with radius 6 cm and perpendicular height 8 cm is filled with water. Calculate the volume of water in dm3\mathrm{dm^3}dm3.
Show answer and explanation

Answer: C · Worked explanation

The volume is 13π×36×8=96π≈301.6 cm3\frac13\pi\times36\times8=96\pi\approx301.6\,\mathrm{cm^3}31​π×36×8=96π≈301.6cm3. Since 1 dm3=1000 cm31\,\mathrm{dm^3}=1000\,\mathrm{cm^3}1dm3=1000cm3, divide by 1000 to get 0.302 dm30.302\,\mathrm{dm^3}0.302dm3. Dividing by 10 or 100 gives 30.2 or 3.02, which comes from converting the length factor without cubing it. The volume is found in cubic centimetres first because both lengths are given in centimetres.
8.

Hard[2 marks]

The distance between P(2,k,1)P(2,k,1)P(2,k,1) and Q(4,3,−1)Q(4,3,-1)Q(4,3,−1) is 3 units, and k>3k>3k>3. Determine kkk.
Show answer and explanation

Answer: A · Worked explanation

Set 22+(3−k)2+(−2)2=92^2+(3-k)^2+(-2)^2=922+(3−k)2+(−2)2=9, which gives (3−k)2=1(3-k)^2=1(3−k)2=1. So k=4k=4k=4 or k=2k=2k=2, and the condition k>3k>3k>3 leaves k=4k=4k=4. The value k=2k=2k=2 ignores the condition. The value 3+53+\sqrt53+5​ comes from leaving out the zzz-difference. Always read the condition on kkk, since it decides which solution of (3−k)2=1(3-k)^2=1(3−k)2=1 is kept.
9.

Hard[2 marks]

A solid hemisphere has radius 6 cm. Calculate its total surface area, including the flat circular base.
Show answer and explanation

Answer: C · Worked explanation

The curved part is half a sphere: 2πr2=72π2\pi r^2=72\pi2πr2=72π. The flat base adds πr2=36π\pi r^2=36\piπr2=36π. The total is 108π≈339 cm2108\pi\approx339\,\mathrm{cm^2}108π≈339cm2. The value 226 is the curved part alone, and 452 is the area of the whole sphere. Both ignore the base or the halving.
10.

Hard[2 marks]

A solid metal sphere of radius rrr is melted and recast as a cone of base radius rrr. Determine the height of the cone.
Show answer and explanation

Answer: B · Worked explanation

The volume stays the same, so 13πr2h=43πr3\frac13\pi r^2h=\frac43\pi r^331​πr2h=34​πr3. Cancelling 13πr2\frac13\pi r^231​πr2 gives h=4rh=4rh=4r. The value 4r3\frac{4r}{3}34r​ is the height of a cylinder with the same radius, because a cylinder has no factor 13\frac1331​. The value 2r2r2r is only the sphere’s diameter.

Keep going

Next topic3.2 Right-angled and non-right-angled trigonometryPrevious topic2.16 Modulus and reciprocal graphs

More in Topic 3 · Geometry and trigonometry

  1. 3.13D distance, volume and surface areaNotes · 10 questions
  2. 3.2Right-angled and non-right-angled trigonometryNotes · 10 questions
  3. 3.3Applications of trigonometryNotes · 10 questions
  4. 3.4Radians, arcs and sectorsNotes · 10 questions
  5. 3.5The unit circleNotes · 10 questions
  6. 3.6Trigonometric identitiesNotes · 10 questions
  7. 3.7Circular functionsNotes · 10 questions
  8. 3.8Solving trigonometric equationsNotes · 10 questions
  9. 3.9Reciprocal and inverse trig functionsNotes · 10 questions· HL only

All IB Mathematics: Analysis and Approaches topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Pythagoras’ theorem extends to distances in three dimensions
  2. 2Volume measures the space inside a solid
  3. 3Cylinders, cones and spheres have their own formulas
  4. 4Surface area adds the areas of every outer face
  5. 5Real problems combine solids and need consistent units
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe