Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Analysis and Approaches
  3. ›3 Geometry and trigonometry
  4. ›3.4 Radians, arcs and sectors

IB Mathematics: Analysis and Approaches · Topic 3 · Geometry and trigonometry

3.4 Radians, arcs and sectors

Convert between degrees and radians, and use radian measure to find arc length and sector area.

  • 5 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6A radian measures an angle by the arc it cuts off
  1. 1A radian measures an angle by the arc it cuts off
  2. 2Degrees and radians convert using half a turn
  3. 3Arc length is the radius times the angle
  4. 4Sector area is half the radius squared times the angle
  5. 5Known arc length and area let you find radius and angle
  6. 6A segment is a sector with a triangle removed
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: A radian measures an angle by the arc it cuts off

A full turn is 360∘360^{\circ}360∘, but that number is a human choice. Mathematicians prefer a measure built from the circle itself.

Take a circle of radius rrr. An arc is a section of its circumference. When the arc has length rrr, the angle at the centre is one radian.

The whole circumference is 2πr2\pi r2πr, so a full turn contains 2π2\pi2π radians. Radians are written without a unit symbol, or with the abbreviation rad.

One radian is a fairly large angle. It is about 57.3∘57.3^{\circ}57.3∘, a little less than a sixth of a full turn.

Key terms · tap one for its definition

arc

An arc is a connected section of the circumference of a circle.

radian

A radian is the angle at the centre of a circle that cuts off an arc equal in length to the radius.

Part 1 done

2

Part 2 of 6: Degrees and radians convert using half a turn

Half a turn is 180∘180^{\circ}180∘, and also π\piπ radians. Think of π\piπ as standing for 180∘180^{\circ}180∘. Then 90∘90^{\circ}90∘ is half of that, so it is π2\frac{\pi}{2}2π​.

  • To change degrees to radians, multiply by π180\frac{\pi}{180}180π​.
  • To change radians to degrees, multiply by 180π\frac{180}{\pi}π180​.

Common angles

DegreesRadians
30∘30^{\circ}30∘π6\frac{\pi}{6}6π​
45∘45^{\circ}45∘π4\frac{\pi}{4}4π​
60∘60^{\circ}60∘π3\frac{\pi}{3}3π​
90∘90^{\circ}90∘π2\frac{\pi}{2}2π​
180∘180^{\circ}180∘π\piπ
360∘360^{\circ}360∘2π2\pi2π
Degrees
30∘30^{\circ}30∘
Radians
π6\frac{\pi}{6}6π​
Degrees
45∘45^{\circ}45∘
Radians
π4\frac{\pi}{4}4π​
Degrees
60∘60^{\circ}60∘
Radians
π3\frac{\pi}{3}3π​
Degrees
90∘90^{\circ}90∘
Radians
π2\frac{\pi}{2}2π​
Degrees
180∘180^{\circ}180∘
Radians
π\piπ
Degrees
360∘360^{\circ}360∘
Radians
2π2\pi2π

Worked example

Converting angles

Convert 135∘135^{\circ}135∘ to radians, and 2.5 radians to degrees.
  1. 1
    Degrees to radians: 135×π180=3π4135\times\frac{\pi}{180}=\frac{3\pi}{4}135×180π​=43π​.
  2. 2
    Radians to degrees: 2.5×180π=143.24…2.5\times\frac{180}{\pi}=143.24\ldots2.5×π180​=143.24…

Answer: 135∘=3π4135^{\circ}=\frac{3\pi}{4}135∘=43π​ radians, and 2.5 radians ≈143.2∘\approx143.2^{\circ}≈143.2∘.

Leave answers in terms of π\piπ unless a decimal is requested. Exact values such as 3π4\frac{3\pi}{4}43π​ are neater and avoid rounding.

Exam tip

Check the calculator mode before every trigonometric calculation. A value found in the wrong mode is wrong by a large factor.

Go deeperWhy radians are the natural unit

Radians keep calculus simple. The derivative of sin⁡x\sin xsinx is cos⁡x\cos xcosx only when xxx is in radians.

With degrees, an extra factor of π180\frac{\pi}{180}180π​ appears every time. That is why advanced work uses radians throughout.

Part 2 done

Quick check

One question on the part you just read

Easy

State the number of radians in one full turn.
Show answer and explanation

Answer: D · Worked explanation

The circumference is 2πr2\pi r2πr and one radian cuts off an arc of length rrr, so a full turn contains 2π2\pi2π radians. The value π\piπ is half a turn, which is 180∘180^{\circ}180∘. The value 360 is the number of degrees in a full turn, not the number of radians.
3

Part 3 of 6: Arc length is the radius times the angle

Now use the radian to measure along a circle. A sector is the region bounded by two radii and an arc, like a slice of pie. The arc length is the length of the arc itself.

A sector with centre angle θ\thetaθ takes the fraction θ2π\frac{\theta}{2\pi}2πθ​ of the circle. So l=θ2π×2πrl=\frac{\theta}{2\pi}\times2\pi rl=2πθ​×2πr, which simplifies to l=rθl=r\thetal=rθ.

Figure 1. The sector has centre O and radius r. The centre angle θ is in radians, and l is the length of the curved edge.

Arc length grows in proportion to both radius and angle. Doubling the angle doubles the arc, and doubling the radius does the same.

Worked example

Finding an arc length

A sector has radius 6 cm and centre angle 0.8 radians. Find the arc length.
  1. 1
    Use l=rθl=r\thetal=rθ.
  2. 2
    Substitute: l=6×0.8l=6\times0.8l=6×0.8.

Answer: The arc length is 4.8 cm4.8\,\mathrm{cm}4.8cm.

Common mistake

The formula l=rθl=r\thetal=rθ works only when θ\thetaθ is in radians. In degrees, use l=θ360×2πrl=\frac{\theta}{360}\times2\pi rl=360θ​×2πr.

Key terms · tap one for its definition

sector

A sector is the region of a circle bounded by two radii and the arc between them.

arc length

The arc length of a sector is l=rθl=r\thetal=rθ, where rrr is the radius and θ\thetaθ the centre angle in radians.

Part 3 done

4

Part 4 of 6: Sector area is half the radius squared times the angle

The same fraction θ2π\frac{\theta}{2\pi}2πθ​ applies to the area of the circle, πr2\pi r^2πr2. So A=θ2π×πr2A=\frac{\theta}{2\pi}\times\pi r^2A=2πθ​×πr2, which simplifies to A=12r2θA=\frac12r^2\thetaA=21​r2θ.

As a check, a sector with centre angle π2\frac{\pi}{2}2π​ is one quarter of the circle. Its area is one quarter of πr2\pi r^2πr2, and the formula agrees.

Worked example

Finding a sector area

A sector has radius 10 cm and centre angle π3\frac{\pi}{3}3π​. Find its area.
  1. 1
    Use A=12r2θA=\frac12r^2\thetaA=21​r2θ.
  2. 2
    Substitute: A=12×102×π3A=\frac12\times10^2\times\frac{\pi}{3}A=21​×102×3π​.
  3. 3
    Simplify: A=50π3A=\frac{50\pi}{3}A=350π​.

Answer: The area is approximately 52.4 cm252.4\,\mathrm{cm^2}52.4cm2.

The perimeter of a sector includes both radii as well as the arc. It equals 2r+rθ2r+r\theta2r+rθ.

Common mistake

The perimeter of a sector is not just the arc length. Add the two straight radii as well, because the boundary includes them.

Part 4 done

Quick check

One question on the part you just read

Easy

Write down 90∘90^{\circ}90∘ in radians.
Show answer and explanation

Answer: A · Worked explanation

Multiply by π180\frac{\pi}{180}180π​: 90×π180=π290\times\frac{\pi}{180}=\frac{\pi}{2}90×180π​=2π​. This is a quarter of a full turn, and a quarter of 2π2\pi2π is π2\frac{\pi}{2}2π​. The value π4\frac{\pi}{4}4π​ corresponds to 45∘45^{\circ}45∘, so it is half the required angle. The value 90π90\pi90π comes from forgetting to divide by 180.
5

Part 5 of 6: Known arc length and area let you find radius and angle

Questions often give some of lll, AAA, rrr and θ\thetaθ and ask for the rest. List what is known. Then choose the formula that contains the unknown.

Since l=rθl=r\thetal=rθ, the area can also be written as A=12rlA=\frac12rlA=21​rl. This is useful when the radius and the arc length are both involved.

Worked example

Working backwards

A sector has arc length 12 cm and centre angle 1.5 radians. Find its radius and its area.
  1. 1
    Rearrange l=rθl=r\thetal=rθ: r=121.5=8r=\frac{12}{1.5}=8r=1.512​=8.
  2. 2
    Use A=12r2θA=\frac12r^2\thetaA=21​r2θ: A=12×82×1.5=48A=\frac12\times8^2\times1.5=48A=21​×82×1.5=48.
  3. 3
    Check with A=12rl=12×8×12=48A=\frac12rl=\frac12\times8\times12=48A=21​rl=21​×8×12=48.

Answer: The radius is 8 cm8\,\mathrm{cm}8cm and the area is 48 cm248\,\mathrm{cm^2}48cm2.

Check your answer by substituting back into both formulas. The same radius and angle should give the original arc length and area. This catches slips in arithmetic before they reach the final answer.

Part 5 done

6

Part 6 of 6: A segment is a sector with a triangle removed

Circle problems often involve a shape cut off by a straight line. A chord is a straight line joining two points on a circle. A segment is the region between a chord and its arc.

Its area is the sector area minus the triangle formed by the two radii and the chord. The triangle has two sides of length rrr enclosing the angle θ\thetaθ, so its area is 12r2sin⁡θ\frac12r^2\sin\theta21​r2sinθ.

The segment area is therefore 12r2(θ−sin⁡θ)\frac12r^2(\theta-\sin\theta)21​r2(θ−sinθ), with θ\thetaθ in radians. Evaluate sin⁡θ\sin\thetasinθ with the calculator in radian mode.

Worked example

Area of a segment

A sector has radius 8 cm and centre angle 1.2 radians. Find the area of the segment cut off by its chord.
  1. 1
    Sector: 12×82×1.2=38.4\frac12\times8^2\times1.2=38.421​×82×1.2=38.4.
  2. 2
    Triangle: 12×82×sin⁡1.2=32×0.9320=29.83\frac12\times8^2\times\sin1.2=32\times0.9320=29.8321​×82×sin1.2=32×0.9320=29.83.
  3. 3
    Subtract: 38.4−29.83=8.5738.4-29.83=8.5738.4−29.83=8.57.

Answer: The segment area is approximately 8.57 cm28.57\,\mathrm{cm^2}8.57cm2.

Key terms · tap one for its definition

chord

A chord is a straight line segment joining two points on a circle.

segment

A segment is the region of a circle between a chord and the arc that the chord cuts off.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[1 mark]

    Define one radian.

    Show mark schemeHide mark scheme

    Model answer

    One radian is the angle at the centre of a circle that cuts off an arc equal in length to the radius.

    • 1 mark for stating that the arc length equals the radius, with the angle at the centre
  2. 2.Calculate[2 marks]

    Calculate, in degrees, the size of the angle 5π6\frac{5\pi}{6}65π​ radians.

    Show mark schemeHide mark scheme

    Model answer

    5π6×180π=150∘\frac{5\pi}{6}\times\frac{180}{\pi}=150^{\circ}65π​×π180​=150∘.

    • 1 mark for multiplying by 180π\frac{180}{\pi}π180​
    • 1 mark for obtaining 150∘150^{\circ}150∘
  3. 3.Calculate[2 marks]

    Calculate the arc length of a sector with radius 7.5 cm and centre angle 1.2 radians.

    Show mark schemeHide mark scheme

    Model answer

    l=rθ=7.5×1.2=9.0 cml=r\theta=7.5\times1.2=9.0\,\mathrm{cm}l=rθ=7.5×1.2=9.0cm.

    • 1 mark for using l=rθl=r\thetal=rθ
    • 1 mark for obtaining 9.0 cm9.0\,\mathrm{cm}9.0cm
  4. 4.Calculate[3 marks]

    Calculate the area of a sector with radius 9 cm and centre angle 2π3\frac{2\pi}{3}32π​.

    Show mark schemeHide mark scheme

    Model answer

    A=12r2θ=12×81×2π3=27π≈84.8 cm2A=\frac12r^2\theta=\frac12\times81\times\frac{2\pi}{3}=27\pi\approx84.8\,\mathrm{cm^2}A=21​r2θ=21​×81×32π​=27π≈84.8cm2.

    • 1 mark for using A=12r2θA=\frac12r^2\thetaA=21​r2θ
    • 1 mark for substituting correctly
    • 1 mark for obtaining 27π≈84.8 cm227\pi\approx84.8\,\mathrm{cm^2}27π≈84.8cm2
  5. 5.Determine[4 marks]

    Determine the radius and the centre angle of a sector with arc length 15 cm and area 75 cm275\,\mathrm{cm^2}75cm2.

    Show mark schemeHide mark scheme

    Model answer

    Using A=12rlA=\frac12rlA=21​rl, 75=12×r×1575=\frac12\times r\times1575=21​×r×15, so r=10 cmr=10\,\mathrm{cm}r=10cm. Then θ=lr=1510=1.5\theta=\frac{l}{r}=\frac{15}{10}=1.5θ=rl​=1015​=1.5 radians.

    • 1 mark for using A=12rlA=\frac12rlA=21​rl or equivalent
    • 1 mark for obtaining r=10 cmr=10\,\mathrm{cm}r=10cm
    • 1 mark for using θ=lr\theta=\frac{l}{r}θ=rl​
    • 1 mark for obtaining θ=1.5\theta=1.5θ=1.5 radians
  6. 6.Explain[2 marks]

    Explain why the formula l=rθl=r\thetal=rθ requires θ\thetaθ to be in radians.

    Show mark schemeHide mark scheme

    Model answer

    The formula comes from the fraction θ2π\frac{\theta}{2\pi}2πθ​ of the circumference 2πr2\pi r2πr. This fraction uses 2π2\pi2π for a full turn, which is true only in radians.

    • 1 mark for stating that l=θ2π×2πrl=\frac{\theta}{2\pi}\times2\pi rl=2πθ​×2πr
    • 1 mark for linking the full turn of 2π2\pi2π to radian measure

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the formula for the arc length of a sector with radius rrr and centre angle θ\thetaθ in radians.
Show answer and explanation

Answer: B · Worked explanation

Arc length is the radius multiplied by the angle in radians: l=rθl=r\thetal=rθ. The expression 12r2θ\frac12r^2\theta21​r2θ is the area of the sector, which is measured in square units. The expression θr\frac{\theta}{r}rθ​ has the radius in the wrong place, because a larger radius must give a longer arc.
4.

Medium·Calculate[2 marks]

Calculate the size of an angle of 2 radians in degrees.
Show answer and explanation

Answer: C · Worked explanation

Multiply by 180π\frac{180}{\pi}π180​: 2×180π≈114.6∘2\times\frac{180}{\pi}\approx114.6^{\circ}2×π180​≈114.6∘. The value 0.0349 comes from multiplying by π180\frac{\pi}{180}180π​, which converts in the opposite direction. The value 57.3∘57.3^{\circ}57.3∘ is the size of one radian, so it is half the required angle. Check: one radian is about 57.3∘57.3^{\circ}57.3∘, so 2 radians should be about double that.
5.

Medium[2 marks]

A sector has radius 12 cm and centre angle 75∘75^{\circ}75∘. Calculate its arc length.
Show answer and explanation

Answer: A · Worked explanation

Convert first: 75∘=5π1275^{\circ}=\frac{5\pi}{12}75∘=125π​ radians. Then l=12×5π12=5π≈15.7 cml=12\times\frac{5\pi}{12}=5\pi\approx15.7\,\mathrm{cm}l=12×125π​=5π≈15.7cm. The value 900 comes from using l=rθl=r\thetal=rθ with the angle in degrees. The value 94.2 is the sector area, found with 12r2θ\frac12r^2\theta21​r2θ, which is a different quantity. As a check, a full circle has circumference about 75.4 cm, so an arc of 15.7 cm is a sensible fraction.
6.

Medium[2 marks]

A sector has radius 8 cm and centre angle 0.5 radians. Calculate its area.
Show answer and explanation

Answer: C · Worked explanation

The area is 12r2θ=12×64×0.5=16 cm2\frac12r^2\theta=\frac12\times64\times0.5=16\,\mathrm{cm^2}21​r2θ=21​×64×0.5=16cm2. The value 32 comes from leaving out the factor 12\frac1221​. The value 4 is the arc length rθr\thetarθ in centimetres, and the value 2 comes from using rrr in place of r2r^2r2. Check: the area is smaller than the full circle, πr2≈201 cm2\pi r^2\approx201\,\mathrm{cm^2}πr2≈201cm2.
7.

Medium[2 marks]

A sector has radius 5 cm and centre angle 1.2 radians. Calculate its perimeter.
Show answer and explanation

Answer: B · Worked explanation

The perimeter is two radii plus the arc: 2×5+5×1.2=10+6=16 cm2\times5+5\times1.2=10+6=16\,\mathrm{cm}2×5+5×1.2=10+6=16cm. The value 6 is the arc length alone. The value 11 counts only one radius. The value 15 is the area 12×25×1.2\frac12\times25\times1.221​×25×1.2, which is measured in square centimetres, not a length.
8.

Hard[2 marks]

A sector has area 27 cm227\,\mathrm{cm^2}27cm2 and arc length 9 cm. Determine its centre angle.
Show answer and explanation

Answer: D · Worked explanation

Use A=12rlA=\frac12rlA=21​rl: 27=12×r×927=\frac12\times r\times927=21​×r×9, so r=6 cmr=6\,\mathrm{cm}r=6cm. Then θ=lr=96=1.5\theta=\frac{l}{r}=\frac96=1.5θ=rl​=69​=1.5 radians. The value 23\frac2332​ comes from treating the arc length 9 as the radius in A=12r2θA=\frac12r^2\thetaA=21​r2θ. The value 6 is the radius itself, not an angle. Check: 12×62×1.5=27\frac12\times6^2\times1.5=2721​×62×1.5=27. Finding the radius first turns the angle into a single division.
9.

Hard[2 marks]

A sector has radius 6 cm and centre angle 150∘150^{\circ}150∘. Calculate its area.
Show answer and explanation

Answer: B · Worked explanation

Convert: 150∘=5π6150^{\circ}=\frac{5\pi}{6}150∘=65π​ radians. Then A=12×36×5π6=15π≈47.1 cm2A=\frac12\times36\times\frac{5\pi}{6}=15\pi\approx47.1\,\mathrm{cm^2}A=21​×36×65π​=15π≈47.1cm2. The value 94.2 leaves out the factor 12\frac1221​. The value 15.7 is the arc length, and 2700 comes from using the angle in degrees inside the radian formula. Check: the full circle has area about 113 cm2113\,\mathrm{cm^2}113cm2, and 150∘150^{\circ}150∘ is a little less than half of it.
10.

Hard[2 marks]

A sector of radius 4 cm and centre angle 1.5 radians has the same arc length as a sector of radius 6 cm. Determine the centre angle of the second sector.
Show answer and explanation

Answer: A · Worked explanation

The first arc length is 4×1.5=6 cm4\times1.5=6\,\mathrm{cm}4×1.5=6cm. For the second, 6θ=66\theta=66θ=6, so θ=1\theta=1θ=1 radian. The value 23\frac2332​ comes from matching the areas instead of the arc lengths. The value 2.25 comes from scaling the angle up by the ratio of the radii, when a larger radius needs a smaller angle.

Keep going

Next topic3.5 The unit circlePrevious topic3.3 Applications of trigonometry

More in Topic 3 · Geometry and trigonometry

  1. 3.13D distance, volume and surface areaNotes · 10 questions
  2. 3.2Right-angled and non-right-angled trigonometryNotes · 10 questions
  3. 3.3Applications of trigonometryNotes · 10 questions
  4. 3.4Radians, arcs and sectorsNotes · 10 questions
  5. 3.5The unit circleNotes · 10 questions
  6. 3.6Trigonometric identitiesNotes · 10 questions
  7. 3.7Circular functionsNotes · 10 questions
  8. 3.8Solving trigonometric equationsNotes · 10 questions
  9. 3.9Reciprocal and inverse trig functionsNotes · 10 questions· HL only

All IB Mathematics: Analysis and Approaches topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/6 read

  1. 1A radian measures an angle by the arc it cuts off
  2. 2Degrees and radians convert using half a turn
  3. 3Arc length is the radius times the angle
  4. 4Sector area is half the radius squared times the angle
  5. 5Known arc length and area let you find radius and angle
  6. 6A segment is a sector with a triangle removed
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe