Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Analysis and Approaches
  3. ›3 Geometry and trigonometry
  4. ›3.13 Scalar product

IB Mathematics: Analysis and Approaches · Topic 3 · Geometry and trigonometry

3.13 Scalar product

Calculate the scalar product of two vectors, use it to find the angle between them, and apply it to geometric problems.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5The scalar product turns two vectors into one number
  1. 1The scalar product turns two vectors into one number
  2. 2Components give a quicker way to calculate it
  3. 3Perpendicular and parallel vectors give special values
  4. 4Rearranging the definition gives the angle between vectors
  5. 5The scalar product solves problems about shapes
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: The scalar product turns two vectors into one number

Imagine pushing a sledge along flat ground. Only the part of your push that points along the ground moves the sledge. This idea leads to the scalar product, which combines two vectors into one number.

Place both vectors so they start at the same point. Let θ\thetaθ be the angle between them, with 0∘≤θ≤180∘0^{\circ}\le\theta\le180^{\circ}0∘≤θ≤180∘. The scalar product is a⋅b=∣a∣∣b∣cos⁡θ\mathbf{a}\cdot\mathbf{b}=|\mathbf{a}||\mathbf{b}|\cos\thetaa⋅b=∣a∣∣b∣cosθ, where ∣a∣|\mathbf{a}|∣a∣ is the length of a\mathbf{a}a.

Figure 1. Both vectors start at the same point. The angle θ is measured between them.

The sign of the result tells you about the angle. An acute angle gives a positive number, a right angle gives zero, and an obtuse angle gives a negative number.

Key term

scalar product

The scalar product of vectors a\mathbf{a}a and b\mathbf{b}b is the number ∣a∣∣b∣cos⁡θ|\mathbf{a}||\mathbf{b}|\cos\theta∣a∣∣b∣cosθ, where θ\thetaθ is the angle between them.

Part 1 done

2

Part 2 of 5: Components give a quicker way to calculate it

The cosine formula needs an angle, and the angle is often unknown. When vectors are given by components, there is a quicker rule. Multiply the matching components, then add the results.

For vectors with components (a1,a2,a3)(a_1,a_2,a_3)(a1​,a2​,a3​) and (b1,b2,b3)(b_1,b_2,b_3)(b1​,b2​,b3​), the rule is a⋅b=a1b1+a2b2+a3b3\mathbf{a}\cdot\mathbf{b}=a_1b_1+a_2b_2+a_3b_3a⋅b=a1​b1​+a2​b2​+a3​b3​. Both methods give the same number. That number is a scalar, so it has no direction.

The rule also works in two dimensions. Drop the third component. For (a1,a2)(a_1,a_2)(a1​,a2​) and (b1,b2)(b_1,b_2)(b1​,b2​), the result is a1b1+a2b2a_1b_1+a_2b_2a1​b1​+a2​b2​.

Worked example

Scalar product from components

Calculate a⋅b\mathbf{a}\cdot\mathbf{b}a⋅b for a=(2−13)\mathbf{a}=\begin{pmatrix}2 \\ -1 \\ 3\end{pmatrix}a=​2−13​​ and b=(45−2)\mathbf{b}=\begin{pmatrix}4 \\ 5 \\ -2\end{pmatrix}b=​45−2​​.
  1. 1
    Multiply the matching components: 2×42\times42×4, (−1)×5(-1)\times5(−1)×5 and 3×(−2)3\times(-2)3×(−2).
  2. 2
    Write the results: 8, -5 and -6.
  3. 3
    Add them: 8−5−6=−38-5-6=-38−5−6=−3.

Answer: a⋅b=−3\mathbf{a}\cdot\mathbf{b}=-3a⋅b=−3. The negative value shows that the angle between the vectors is obtuse.

Exam tip

Write each product on its own before adding. Most errors come from a negative component.

Key term

scalar

A scalar is a quantity with magnitude only and no direction, such as a length or a real number.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate a⋅b\mathbf{a}\cdot\mathbf{b}a⋅b for a=(3−21)\mathbf{a}=\begin{pmatrix}3 \\ -2 \\ 1\end{pmatrix}a=​3−21​​ and b=(40−5)\mathbf{b}=\begin{pmatrix}4 \\ 0 \\ -5\end{pmatrix}b=​40−5​​.
Show answer and explanation

Answer: C · Worked explanation

Multiply matching components and add: 3×4+(−2)×0+1×(−5)=12+0−5=73\times4+(-2)\times0+1\times(-5)=12+0-5=73×4+(−2)×0+1×(−5)=12+0−5=7. The value 17 comes from treating 1×(−5)1\times(-5)1×(−5) as +5+5+5, which is a sign error. The result is a single number, not a vector. Keep the sign of each component while multiplying, and add only at the end.
3

Part 3 of 5: Perpendicular and parallel vectors give special values

Now look at the extreme angles. Two non-zero vectors are perpendicular when the angle between them is 90∘90^{\circ}90∘. Then cos⁡θ=0\cos\theta=0cosθ=0, so a⋅b=0\mathbf{a}\cdot\mathbf{b}=0a⋅b=0. The reverse also holds for non-zero vectors.

Parallel vectors have θ=0∘\theta=0^{\circ}θ=0∘ or θ=180∘\theta=180^{\circ}θ=180∘. Their scalar product is ±∣a∣∣b∣\pm|\mathbf{a}||\mathbf{b}|±∣a∣∣b∣. A vector with itself gives a⋅a=∣a∣2\mathbf{a}\cdot\mathbf{a}=|\mathbf{a}|^2a⋅a=∣a∣2, which links the scalar product to length.

  • a⋅b=b⋅a\mathbf{a}\cdot\mathbf{b}=\mathbf{b}\cdot\mathbf{a}a⋅b=b⋅a, so the order does not matter.
  • a⋅(b+c)=a⋅b+a⋅c\mathbf{a}\cdot(\mathbf{b}+\mathbf{c})=\mathbf{a}\cdot\mathbf{b}+\mathbf{a}\cdot\mathbf{c}a⋅(b+c)=a⋅b+a⋅c.
  • (ka)⋅b=k(a⋅b)(k\mathbf{a})\cdot\mathbf{b}=k(\mathbf{a}\cdot\mathbf{b})(ka)⋅b=k(a⋅b) for any real number kkk.

Common mistake

A zero scalar product does not make a vector zero. Either one vector is the zero vector, or the vectors are perpendicular.

Key term

perpendicular

Two non-zero vectors are perpendicular when the angle between them is 90∘90^{\circ}90∘, which happens exactly when their scalar product is zero.

Part 3 done

4

Part 4 of 5: Rearranging the definition gives the angle between vectors

Often you know two vectors and need the angle between them. Rearrange the cosine formula to get cos⁡θ=a⋅b∣a∣∣b∣\cos\theta=\frac{\mathbf{a}\cdot\mathbf{b}}{|\mathbf{a}||\mathbf{b}|}cosθ=∣a∣∣b∣a⋅b​. Find the scalar product from components, then find the two lengths.

Each length comes from ∣a∣=a12+a22+a32|\mathbf{a}|=\sqrt{a_1^2+a_2^2+a_3^2}∣a∣=a12​+a22​+a32​​. Then use the inverse cosine on a calculator. The angle always lies between 0∘0^{\circ}0∘ and 180∘180^{\circ}180∘.

This method needs no diagram, which makes it reliable in three dimensions. If the fraction falls outside the range -1 to 1, recheck your arithmetic.

Worked example

Angle between two vectors

Find the angle between a=(122)\mathbf{a}=\begin{pmatrix}1 \\ 2 \\ 2\end{pmatrix}a=​122​​ and b=(2−12)\mathbf{b}=\begin{pmatrix}2 \\ -1 \\ 2\end{pmatrix}b=​2−12​​.
  1. 1
    Scalar product: a⋅b=2−2+4=4\mathbf{a}\cdot\mathbf{b}=2-2+4=4a⋅b=2−2+4=4.
  2. 2
    Lengths: ∣a∣=1+4+4=3|\mathbf{a}|=\sqrt{1+4+4}=3∣a∣=1+4+4​=3 and ∣b∣=4+1+4=3|\mathbf{b}|=\sqrt{4+1+4}=3∣b∣=4+1+4​=3.
  3. 3
    Substitute: cos⁡θ=43×3=49\cos\theta=\frac{4}{3\times3}=\frac{4}{9}cosθ=3×34​=94​.
  4. 4
    Apply the inverse cosine: θ=cos⁡−1(49)\theta=\cos^{-1}\left(\frac{4}{9}\right)θ=cos−1(94​).

Answer: θ≈63.6∘\theta\approx63.6^{\circ}θ≈63.6∘.

Exam tip

Keep your calculator in degree mode. Give the angle to 3 significant figures unless told otherwise.

Part 4 done

Quick check

One question on the part you just read

Easy

State the value of a⋅b\mathbf{a}\cdot\mathbf{b}a⋅b when two non-zero vectors are perpendicular.
Show answer and explanation

Answer: A · Worked explanation

Perpendicular vectors have θ=90∘\theta=90^{\circ}θ=90∘, so cos⁡θ=0\cos\theta=0cosθ=0 and the scalar product is 0. The value ∣a∣∣b∣|\mathbf{a}||\mathbf{b}|∣a∣∣b∣ applies to parallel vectors pointing the same way, where cos⁡θ=1\cos\theta=1cosθ=1. The value 1 is not fixed by the angle alone. The same rule gives 0 for perpendicular vectors, whatever their lengths.
5

Part 5 of 5: The scalar product solves problems about shapes

The angle formula also works with points. To find an angle in a triangle, build two vectors from the vertex. For the angle at AAA, use AB→\overrightarrow{AB}AB and AC→\overrightarrow{AC}AC. Each vector is the end point minus the start point.

Choose two vectors that both leave the vertex. If one arrives and one leaves, you find the supplementary angle instead.

A scalar product of zero also helps with unknowns. If a vertex angle is a right angle, set the product equal to zero. Then solve for the unknown coordinate.

Worked example

Angle in a triangle

Triangle ABCABCABC has A(1,0,2)A(1,0,2)A(1,0,2), B(3,1,0)B(3,1,0)B(3,1,0) and C(2,3,1)C(2,3,1)C(2,3,1). Find angle BACBACBAC.
  1. 1
    Form the vectors: AB→=(21−2)\overrightarrow{AB}=\begin{pmatrix}2 \\ 1 \\ -2\end{pmatrix}AB=​21−2​​ and AC→=(13−1)\overrightarrow{AC}=\begin{pmatrix}1 \\ 3 \\ -1\end{pmatrix}AC=​13−1​​.
  2. 2
    Scalar product: 2+3+2=72+3+2=72+3+2=7.
  3. 3
    Lengths: ∣AB→∣=3|\overrightarrow{AB}|=3∣AB∣=3 and ∣AC→∣=11|\overrightarrow{AC}|=\sqrt{11}∣AC∣=11​.
  4. 4
    Substitute: cos⁡(BAC)=7311≈0.7035\cos(BAC)=\frac{7}{3\sqrt{11}}\approx0.7035cos(BAC)=311​7​≈0.7035.

Answer: Angle BAC≈45.3∘BAC\approx45.3^{\circ}BAC≈45.3∘.

Go deeperWhy the two formulae agree

Draw a triangle with sides a\mathbf{a}a, b\mathbf{b}b and a−b\mathbf{a}-\mathbf{b}a−b. The cosine rule gives ∣a−b∣2=∣a∣2+∣b∣2−2∣a∣∣b∣cos⁡θ|\mathbf{a}-\mathbf{b}|^2=|\mathbf{a}|^2+|\mathbf{b}|^2-2|\mathbf{a}||\mathbf{b}|\cos\theta∣a−b∣2=∣a∣2+∣b∣2−2∣a∣∣b∣cosθ.

Expanding ∣a−b∣2|\mathbf{a}-\mathbf{b}|^2∣a−b∣2 with components gives ∣a∣2+∣b∣2−2(a1b1+a2b2+a3b3)|\mathbf{a}|^2+|\mathbf{b}|^2-2(a_1b_1+a_2b_2+a_3b_3)∣a∣2+∣b∣2−2(a1​b1​+a2​b2​+a3​b3​). Comparing the two results shows that ∣a∣∣b∣cos⁡θ=a1b1+a2b2+a3b3|\mathbf{a}||\mathbf{b}|\cos\theta=a_1b_1+a_2b_2+a_3b_3∣a∣∣b∣cosθ=a1​b1​+a2​b2​+a3​b3​.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the two formulae for the scalar product a⋅b\mathbf{a}\cdot\mathbf{b}a⋅b: one using the angle between the vectors and one using components.

    Show mark schemeHide mark scheme

    Model answer

    a⋅b=∣a∣∣b∣cos⁡θ\mathbf{a}\cdot\mathbf{b}=|\mathbf{a}||\mathbf{b}|\cos\thetaa⋅b=∣a∣∣b∣cosθ and a⋅b=a1b1+a2b2+a3b3\mathbf{a}\cdot\mathbf{b}=a_1b_1+a_2b_2+a_3b_3a⋅b=a1​b1​+a2​b2​+a3​b3​.

    • 1 mark for writing ∣a∣∣b∣cos⁡θ|\mathbf{a}||\mathbf{b}|\cos\theta∣a∣∣b∣cosθ with θ\thetaθ the angle between the vectors
    • 1 mark for writing a1b1+a2b2+a3b3a_1b_1+a_2b_2+a_3b_3a1​b1​+a2​b2​+a3​b3​
  2. 2.Calculate[2 marks]

    Calculate a⋅b\mathbf{a}\cdot\mathbf{b}a⋅b for a=(3−12)\mathbf{a}=\begin{pmatrix}3 \\ -1 \\ 2\end{pmatrix}a=​3−12​​ and b=(14−2)\mathbf{b}=\begin{pmatrix}1 \\ 4 \\ -2\end{pmatrix}b=​14−2​​.

    Show mark schemeHide mark scheme

    Model answer

    a⋅b=3×1+(−1)×4+2×(−2)=3−4−4=−5\mathbf{a}\cdot\mathbf{b}=3\times1+(-1)\times4+2\times(-2)=3-4-4=-5a⋅b=3×1+(−1)×4+2×(−2)=3−4−4=−5.

    • 1 mark for multiplying the matching components
    • 1 mark for obtaining -5
  3. 3.Determine[3 marks]

    Determine the value of kkk for which (k3−2)\begin{pmatrix}k \\ 3 \\ -2\end{pmatrix}​k3−2​​ and (4−21)\begin{pmatrix}4 \\ -2 \\ 1\end{pmatrix}​4−21​​ are perpendicular.

    Show mark schemeHide mark scheme

    Model answer

    Perpendicular vectors have scalar product zero, so 4k−6−2=04k-6-2=04k−6−2=0. Therefore 4k=84k=84k=8 and k=2k=2k=2.

    • 1 mark for setting the scalar product equal to zero
    • 1 mark for writing 4k−6−2=04k-6-2=04k−6−2=0
    • 1 mark for obtaining k=2k=2k=2
  4. 4.Calculate[3 marks]

    Calculate the angle between (304)\begin{pmatrix}3 \\ 0 \\ 4\end{pmatrix}​304​​ and (122)\begin{pmatrix}1 \\ 2 \\ 2\end{pmatrix}​122​​. Give your answer to 3 significant figures.

    Show mark schemeHide mark scheme

    Model answer

    The scalar product is 3+0+8=113+0+8=113+0+8=11. The lengths are 5 and 3. So cos⁡θ=1115\cos\theta=\frac{11}{15}cosθ=1511​ and θ≈42.8∘\theta\approx42.8^{\circ}θ≈42.8∘.

    • 1 mark for finding the scalar product 11
    • 1 mark for finding the lengths 5 and 3
    • 1 mark for obtaining θ≈42.8∘\theta\approx42.8^{\circ}θ≈42.8∘
  5. 5.Explain[2 marks]

    Explain why two non-zero vectors with a⋅b=0\mathbf{a}\cdot\mathbf{b}=0a⋅b=0 must be perpendicular.

    Show mark schemeHide mark scheme

    Model answer

    Since a⋅b=∣a∣∣b∣cos⁡θ\mathbf{a}\cdot\mathbf{b}=|\mathbf{a}||\mathbf{b}|\cos\thetaa⋅b=∣a∣∣b∣cosθ and both lengths are non-zero, cos⁡θ=0\cos\theta=0cosθ=0. So θ=90∘\theta=90^{\circ}θ=90∘.

    • 1 mark for stating that both lengths are non-zero, so cos⁡θ=0\cos\theta=0cosθ=0
    • 1 mark for concluding that θ=90∘\theta=90^{\circ}θ=90∘
  6. 6.Determine[3 marks]

    Determine whether triangle PQRPQRPQR with P(1,1,0)P(1,1,0)P(1,1,0), Q(3,2,1)Q(3,2,1)Q(3,2,1) and R(2,0,−1)R(2,0,-1)R(2,0,−1) has a right angle at PPP.

    Show mark schemeHide mark scheme

    Model answer

    PQ→=(211)\overrightarrow{PQ}=\begin{pmatrix}2 \\ 1 \\ 1\end{pmatrix}PQ​=​211​​ and PR→=(1−1−1)\overrightarrow{PR}=\begin{pmatrix}1 \\ -1 \\ -1\end{pmatrix}PR=​1−1−1​​. Their scalar product is 2−1−1=02-1-1=02−1−1=0, so the angle at PPP is a right angle.

    • 1 mark for finding PQ→\overrightarrow{PQ}PQ​ and PR→\overrightarrow{PR}PR
    • 1 mark for finding the scalar product 0
    • 1 mark for concluding that the angle at P is a right angle

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Two vectors have a⋅b<0\mathbf{a}\cdot\mathbf{b}<0a⋅b<0. Identify what this says about the angle between them.
Show answer and explanation

Answer: D · Worked explanation

The scalar product is ∣a∣∣b∣cos⁡θ|\mathbf{a}||\mathbf{b}|\cos\theta∣a∣∣b∣cosθ and both lengths are positive. A negative value needs cos⁡θ<0\cos\theta<0cosθ<0, so θ\thetaθ is between 90∘90^{\circ}90∘ and 180∘180^{\circ}180∘. An acute angle would give a positive product. The sign of a scalar product therefore gives a quick check on whether an angle is acute or obtuse.
4.

Medium·Calculate[1 mark]

Calculate the angle between (101)\begin{pmatrix}1 \\ 0 \\ 1\end{pmatrix}​101​​ and (011)\begin{pmatrix}0 \\ 1 \\ 1\end{pmatrix}​011​​.
Show answer and explanation

Answer: B · Worked explanation

The scalar product is 0+0+1=10+0+1=10+0+1=1 and each length is 2\sqrt{2}2​. So cos⁡θ=12\cos\theta=\frac{1}{2}cosθ=21​ and θ=60∘\theta=60^{\circ}θ=60∘. The value 45∘45^{\circ}45∘ would need cos⁡θ=12\cos\theta=\frac{1}{\sqrt{2}}cosθ=2​1​, which comes from forgetting to multiply the two lengths. The denominator is 2×2=2\sqrt{2}\times\sqrt{2}=22​×2​=2, the product of the two lengths.
5.

Medium·Calculate[2 marks]

Calculate kkk so that (k2−1)\begin{pmatrix}k \\ 2 \\ -1\end{pmatrix}​k2−1​​ and (3−14)\begin{pmatrix}3 \\ -1 \\ 4\end{pmatrix}​3−14​​ are perpendicular.
Show answer and explanation

Answer: D · Worked explanation

Set the scalar product to zero: 3k−2−4=03k-2-4=03k−2−4=0, so 3k=63k=63k=6 and k=2k=2k=2. The value k=23k=\frac{2}{3}k=32​ comes from leaving out the -4 term. The value k=6k=6k=6 stops one step early, before dividing by 3. Substituting k=2k=2k=2 back gives 6−2−4=06-2-4=06−2−4=0, which confirms the result.
6.

Medium·Determine[1 mark]

Determine the relationship between (2−21)\begin{pmatrix}2 \\ -2 \\ 1\end{pmatrix}​2−21​​ and (122)\begin{pmatrix}1 \\ 2 \\ 2\end{pmatrix}​122​​.
Show answer and explanation

Answer: A · Worked explanation

The scalar product is 2−4+2=02-4+2=02−4+2=0, and both vectors are non-zero. So they are perpendicular. The vectors are not parallel, because (2,−2,1)(2,-2,1)(2,−2,1) is not a multiple of (1,2,2)(1,2,2)(1,2,2). Test for a zero scalar product before anything else, because it settles the question at once.
7.

Medium·Calculate[2 marks]

Two vectors have lengths 4 and 5, with 60∘60^{\circ}60∘ between them. Calculate their scalar product.
Show answer and explanation

Answer: C · Worked explanation

Use ∣a∣∣b∣cos⁡θ=4×5×cos⁡60∘=20×12=10|\mathbf{a}||\mathbf{b}|\cos\theta=4\times5\times\cos60^{\circ}=20\times\frac{1}{2}=10∣a∣∣b∣cosθ=4×5×cos60∘=20×21​=10. The value 20 forgets the cosine factor. The value 10310\sqrt{3}103​ uses sin⁡60∘\sin60^{\circ}sin60∘ instead of cos⁡60∘\cos60^{\circ}cos60∘. The cosine of 60∘60^{\circ}60∘ is exactly 12\frac{1}{2}21​, so no calculator is needed. The sine of 60∘60^{\circ}60∘ belongs to a different formula.
8.

Hard·Calculate[2 marks]

Two vectors have ∣a∣=2|\mathbf{a}|=2∣a∣=2 and ∣b∣=3|\mathbf{b}|=3∣b∣=3, with 120∘120^{\circ}120∘ between them. Calculate ∣a+b∣|\mathbf{a}+\mathbf{b}|∣a+b∣.
Show answer and explanation

Answer: A · Worked explanation

Use ∣a+b∣2=(a+b)⋅(a+b)=4+9+2(2)(3)cos⁡120∘=13−6=7|\mathbf{a}+\mathbf{b}|^2=(\mathbf{a}+\mathbf{b})\cdot(\mathbf{a}+\mathbf{b})=4+9+2(2)(3)\cos120^{\circ}=13-6=7∣a+b∣2=(a+b)⋅(a+b)=4+9+2(2)(3)cos120∘=13−6=7. So the length is 7\sqrt{7}7​. The value 7 is the square of the length, and 13\sqrt{13}13​ ignores the scalar product term. Expanding a squared length with the scalar product is the key step whenever two vectors are added.
9.

Hard·Calculate[2 marks]

Points are A(1,1,0)A(1,1,0)A(1,1,0), B(3,1,0)B(3,1,0)B(3,1,0) and C(4,2,0)C(4,2,0)C(4,2,0). Calculate angle ABCABCABC.
Show answer and explanation

Answer: D · Worked explanation

Use BA→=(−2,0,0)\overrightarrow{BA}=(-2,0,0)BA=(−2,0,0) and BC→=(1,1,0)\overrightarrow{BC}=(1,1,0)BC=(1,1,0), both starting at BBB. Then cos⁡(ABC)=−222=−12\cos(ABC)=\frac{-2}{2\sqrt{2}}=-\frac{1}{\sqrt{2}}cos(ABC)=22​−2​=−2​1​, so the angle is 135∘135^{\circ}135∘. The value 45∘45^{\circ}45∘ comes from using AB→\overrightarrow{AB}AB, which points away from BBB. The negative cosine shows that the angle is obtuse, so 135∘135^{\circ}135∘ is correct and not its supplement 45∘45^{\circ}45∘.
10.

Hard·Determine[2 marks]

Determine the values of kkk for which (kk1)\begin{pmatrix}k \\ k \\ 1\end{pmatrix}​kk1​​ and (k−1−6)\begin{pmatrix}k \\ -1 \\ -6\end{pmatrix}​k−1−6​​ are perpendicular.
Show answer and explanation

Answer: B · Worked explanation

The scalar product is k2−k−6k^2-k-6k2−k−6. Setting it to zero gives (k−3)(k+2)=0(k-3)(k+2)=0(k−3)(k+2)=0, so k=3k=3k=3 or k=−2k=-2k=−2. The answer k=3k=3k=3 only misses the second root. The answer k=−3k=-3k=−3 or k=2k=2k=2 has both signs reversed. Check: k=3k=3k=3 gives 9−3−6=09-3-6=09−3−6=0 and k=−2k=-2k=−2 gives 4+2−6=04+2-6=04+2−6=0.

Keep going

Next topic3.14 Vector equations of linesPrevious topic3.12 Introduction to vectors

More in Topic 3 · Geometry and trigonometry

  1. 3.9Reciprocal and inverse trig functionsNotes · 10 questions· HL only
  2. 3.10Compound angle identitiesNotes · 10 questions· HL only
  3. 3.11Symmetry of trig graphsNotes · 10 questions· HL only
  4. 3.12Introduction to vectorsNotes · 10 questions· HL only
  5. 3.13Scalar productNotes · 10 questions· HL only
  6. 3.14Vector equations of linesNotes · 10 questions· HL only
  7. 3.15Intersecting and skew linesNotes · 10 questions· HL only
  8. 3.16Vector productNotes · 10 questions· HL only
  9. 3.17Vector equations of planesNotes · 10 questions· HL only

All IB Mathematics: Analysis and Approaches topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1The scalar product turns two vectors into one number
  2. 2Components give a quicker way to calculate it
  3. 3Perpendicular and parallel vectors give special values
  4. 4Rearranging the definition gives the angle between vectors
  5. 5The scalar product solves problems about shapes
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe