Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Analysis and Approaches
  3. ›3 Geometry and trigonometry
  4. ›3.17 Vector equations of planes

IB Mathematics: Analysis and Approaches · Topic 3 · Geometry and trigonometry

3.17 Vector equations of planes

Write the vector, scalar product and Cartesian equations of a plane, and convert between them.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A plane is fixed by a point and two directions
  1. 1A plane is fixed by a point and two directions
  2. 2Three points on a plane give its two directions
  3. 3A normal vector gives the scalar product form
  4. 4The Cartesian equation comes from expanding the scalar product
  5. 5Converting from Cartesian to vector form uses parameters
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A plane is fixed by a point and two directions

Picture a sheet of card held flat in the air. Fix one point on it and mark two different directions along it, and the whole sheet is determined. A plane is a flat surface that extends without end.

Let AAA be a point on the plane with position vector a\mathbf{a}a. Let u\mathbf{u}u and v\mathbf{v}v be two non-parallel vectors that lie in the plane. Each is a direction vector of the plane. Any point RRR on the plane is reached by starting at AAA and moving along u\mathbf{u}u and v\mathbf{v}v.

This gives the vector equation of a plane: r=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μv. The scalars λ\lambdaλ and μ\muμ can be any real numbers. Each pair of values gives one point of the plane.

Figure 1. The vectors u and v lie in the plane, and n stands at right angles to the plane.

Key terms · tap one for its definition

plane

A plane is a flat two-dimensional surface that is fixed by one point and two non-parallel direction vectors.

direction vector

A direction vector of a plane is any non-zero vector that lies in the plane.

vector equation of a plane

The vector equation of a plane is r=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μv, where λ\lambdaλ and μ\muμ are real parameters.

Part 1 done

2

Part 2 of 5: Three points on a plane give its two directions

Often a question gives three points instead of directions. Suppose the plane passes through AAA, BBB and CCC, which do not lie on one line. Subtract position vectors to find two directions in the plane.

Use AB→=b−a\overrightarrow{AB}=\mathbf{b}-\mathbf{a}AB=b−a and AC→=c−a\overrightarrow{AC}=\mathbf{c}-\mathbf{a}AC=c−a as u\mathbf{u}u and v\mathbf{v}v. Then use AAA as the fixed point. Any of the three points would do.

Worked example

Plane through three points

Find a vector equation of the plane through A(1,0,2)A(1,0,2)A(1,0,2), B(3,1,1)B(3,1,1)B(3,1,1) and C(2,4,5)C(2,4,5)C(2,4,5).
  1. 1
    Find AB→=(3−11−01−2)=(21−1)\overrightarrow{AB}=\begin{pmatrix}3-1\\1-0\\1-2\end{pmatrix}=\begin{pmatrix}2\\1\\-1\end{pmatrix}AB=​3−11−01−2​​=​21−1​​.
  2. 2
    Find AC→=(2−14−05−2)=(143)\overrightarrow{AC}=\begin{pmatrix}2-1\\4-0\\5-2\end{pmatrix}=\begin{pmatrix}1\\4\\3\end{pmatrix}AC=​2−14−05−2​​=​143​​.
  3. 3
    Neither vector is a multiple of the other, so they are not parallel.
  4. 4
    Use AAA as the fixed point, with a=(102)\mathbf{a}=\begin{pmatrix}1\\0\\2\end{pmatrix}a=​102​​.

Answer: r=(102)+λ(21−1)+μ(143)\mathbf{r}=\begin{pmatrix}1\\0\\2\end{pmatrix}+\lambda\begin{pmatrix}2\\1\\-1\end{pmatrix}+\mu\begin{pmatrix}1\\4\\3\end{pmatrix}r=​102​​+λ​21−1​​+μ​143​​.

Common mistake

The two direction vectors must not be parallel. If AB→\overrightarrow{AB}AB is a multiple of AC→\overrightarrow{AC}AC, the three points lie on one line and do not fix a plane.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify a normal vector to the plane 3x−2y+5z=73x-2y+5z=73x−2y+5z=7.
Show answer and explanation

Answer: C · Worked explanation

The components of a normal vector are the coefficients of xxx, yyy and zzz, in that order, so the normal is (3,−2,5)(3,-2,5)(3,−2,5). The vector (3,−2,7)(3,-2,7)(3,−2,7) wrongly includes the constant 7, which is not a coefficient of a variable. Only the three coefficients are used.
3

Part 3 of 5: A normal vector gives the scalar product form

A different description uses a direction at right angles to the plane. Think of a flagpole standing upright on a flat field. The pole shows how the field is tilted.

A normal vector n\mathbf{n}n is perpendicular to every direction in the plane. Any non-zero multiple of n\mathbf{n}n is also a normal vector. The vector product u×v\mathbf{u}\times\mathbf{v}u×v gives one, because it is perpendicular to both u\mathbf{u}u and v\mathbf{v}v.

For a point RRR on the plane, AR→=r−a\overrightarrow{AR}=\mathbf{r}-\mathbf{a}AR=r−a lies in the plane. So (r−a)⋅n=0(\mathbf{r}-\mathbf{a})\cdot\mathbf{n}=0(r−a)⋅n=0. Expanding gives the scalar product form r⋅n=a⋅n\mathbf{r}\cdot\mathbf{n}=\mathbf{a}\cdot\mathbf{n}r⋅n=a⋅n.

Key terms · tap one for its definition

normal vector

A normal vector is a non-zero vector perpendicular to every direction in a plane.

scalar product form

The scalar product form of a plane is r⋅n=a⋅n\mathbf{r}\cdot\mathbf{n}=\mathbf{a}\cdot\mathbf{n}r⋅n=a⋅n, where n\mathbf{n}n is a normal vector and a\mathbf{a}a locates a point on the plane.

Part 3 done

4

Part 4 of 5: The Cartesian equation comes from expanding the scalar product

Now write r=(x,y,z)\mathbf{r}=(x,y,z)r=(x,y,z) and n=(n1,n2,n3)\mathbf{n}=(n_1,n_2,n_3)n=(n1​,n2​,n3​). Expanding r⋅n=a⋅n\mathbf{r}\cdot\mathbf{n}=\mathbf{a}\cdot\mathbf{n}r⋅n=a⋅n gives n1x+n2y+n3z=dn_1x+n_2y+n_3z=dn1​x+n2​y+n3​z=d, where d=a⋅nd=\mathbf{a}\cdot\mathbf{n}d=a⋅n.

This is the Cartesian equation of a plane. The coefficients of xxx, yyy and zzz are the components of a normal vector. You can read n\mathbf{n}n straight from the equation.

A point on the plane is easy to find. Choose values for two coordinates and solve for the third. In 2x+y+z=42x+y+z=42x+y+z=4, setting y=0y=0y=0 and z=0z=0z=0 gives x=2x=2x=2, so (2,0,0)(2,0,0)(2,0,0) lies on the plane.

Worked example

From vector form to Cartesian form

A plane has equation r=(102)+λ(21−1)+μ(143)\mathbf{r}=\begin{pmatrix}1\\0\\2\end{pmatrix}+\lambda\begin{pmatrix}2\\1\\-1\end{pmatrix}+\mu\begin{pmatrix}1\\4\\3\end{pmatrix}r=​102​​+λ​21−1​​+μ​143​​. Find its Cartesian equation.
  1. 1
    Find a normal: u×v=(1×3−(−1)×4, (−1)×1−2×3, 2×4−1×1)=(7,−7,7)\mathbf{u}\times\mathbf{v}=(1\times3-(-1)\times4,\ (-1)\times1-2\times3,\ 2\times4-1\times1)=(7,-7,7)u×v=(1×3−(−1)×4, (−1)×1−2×3, 2×4−1×1)=(7,−7,7).
  2. 2
    Divide by 7 to simplify: n=(1,−1,1)\mathbf{n}=(1,-1,1)n=(1,−1,1).
  3. 3
    Find d=a⋅n=1×1+0×(−1)+2×1=3d=\mathbf{a}\cdot\mathbf{n}=1\times1+0\times(-1)+2\times1=3d=a⋅n=1×1+0×(−1)+2×1=3.
  4. 4
    Check with B(3,1,1)B(3,1,1)B(3,1,1): 3−1+1=33-1+1=33−1+1=3.

Answer: The Cartesian equation is x−y+z=3x-y+z=3x−y+z=3.

Exam tip

Check your equation by substituting the coordinates of a point that you know lies on the plane. It must satisfy the equation exactly.

Key term

Cartesian equation of a plane

The Cartesian equation of a plane is n1x+n2y+n3z=dn_1x+n_2y+n_3z=dn1​x+n2​y+n3​z=d, where (n1,n2,n3)(n_1,n_2,n_3)(n1​,n2​,n3​) is a normal vector.

Part 4 done

Quick check

One question on the part you just read

Easy

In the equation r=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μv of a plane, state what a\mathbf{a}a represents.
Show answer and explanation

Answer: B · Worked explanation

The vector a\mathbf{a}a is the starting point of the description, so it is the position vector of a known point on the plane. The direction vectors u\mathbf{u}u and v\mathbf{v}v lie in the plane. A vector perpendicular to the plane is the normal, which does not appear in this form.
5

Part 5 of 5: Converting from Cartesian to vector form uses parameters

Sometimes the Cartesian equation is given and a vector form is needed. One quick method treats two variables as parameters. Choose a variable with a non-zero coefficient to solve for, and set the other two equal to λ\lambdaλ and μ\muμ.

Worked example

From Cartesian form to vector form

Write the plane x−y+z=3x-y+z=3x−y+z=3 in the form r=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μv.
  1. 1
    Let y=λy=\lambday=λ and z=μz=\muz=μ.
  2. 2
    Solve for xxx: x=3+λ−μx=3+\lambda-\mux=3+λ−μ.
  3. 3
    Write the position vector: r=(3+λ−μλμ)\mathbf{r}=\begin{pmatrix}3+\lambda-\mu\\\lambda\\\mu\end{pmatrix}r=​3+λ−μλμ​​.
  4. 4
    Separate the parts: r=(300)+λ(110)+μ(−101)\mathbf{r}=\begin{pmatrix}3\\0\\0\end{pmatrix}+\lambda\begin{pmatrix}1\\1\\0\end{pmatrix}+\mu\begin{pmatrix}-1\\0\\1\end{pmatrix}r=​300​​+λ​110​​+μ​−101​​.

Answer: r=(300)+λ(110)+μ(−101)\mathbf{r}=\begin{pmatrix}3\\0\\0\end{pmatrix}+\lambda\begin{pmatrix}1\\1\\0\end{pmatrix}+\mu\begin{pmatrix}-1\\0\\1\end{pmatrix}r=​300​​+λ​110​​+μ​−101​​.

The three forms describe the same plane. The table shows what each one reveals at a glance.

Three forms of the equation of a plane

FormEquationWhat it shows
Vectorr=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μvA point and two directions
Scalar productr⋅n=a⋅n\mathbf{r}\cdot\mathbf{n}=\mathbf{a}\cdot\mathbf{n}r⋅n=a⋅nA point and the normal
Cartesiann1x+n2y+n3z=dn_1x+n_2y+n_3z=dn1​x+n2​y+n3​z=dThe normal, from the coefficients
Form
Vector
Equation
r=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μv
What it shows
A point and two directions
Form
Scalar product
Equation
r⋅n=a⋅n\mathbf{r}\cdot\mathbf{n}=\mathbf{a}\cdot\mathbf{n}r⋅n=a⋅n
What it shows
A point and the normal
Form
Cartesian
Equation
n1x+n2y+n3z=dn_1x+n_2y+n_3z=dn1​x+n2​y+n3​z=d
What it shows
The normal, from the coefficients

Common mistake

A plane has many correct vector equations, because any point and any two non-parallel directions in it will do. Check an answer by testing that each direction vector is perpendicular to n\mathbf{n}n.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[3 marks]

    State the vector equation of a plane through the point with position vector a\mathbf{a}a and with direction vectors u\mathbf{u}u and v\mathbf{v}v.

    Show mark schemeHide mark scheme

    Model answer

    r=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μv, where λ\lambdaλ and μ\muμ are real scalars and u\mathbf{u}u and v\mathbf{v}v are not parallel.

    • 1 mark for writing r=a+λu+μv\mathbf{r}=\mathbf{a}+\lambda\mathbf{u}+\mu\mathbf{v}r=a+λu+μv
    • 1 mark for stating that λ\lambdaλ and μ\muμ are real scalar parameters
    • 1 mark for stating that the direction vectors are not parallel
  2. 2.Write down[2 marks]

    Write down a normal vector to the plane 2x−y+3z=62x-y+3z=62x−y+3z=6, and a point on the plane.

    Show mark schemeHide mark scheme

    Model answer

    A normal vector is (2,−1,3)(2,-1,3)(2,−1,3). The point (3,0,0)(3,0,0)(3,0,0) lies on the plane, since 2×3=62\times3=62×3=6.

    • 1 mark for giving (2,−1,3)(2,-1,3)(2,−1,3), or a non-zero multiple, as the normal vector
    • 1 mark for giving a point that satisfies the equation, such as (3,0,0)(3,0,0)(3,0,0)
  3. 3.Determine[2 marks]

    Determine a Cartesian equation of the plane through (2,1,−1)(2,1,-1)(2,1,−1) with normal vector (3,2,1)(3,2,1)(3,2,1).

    Show mark schemeHide mark scheme

    Model answer

    d=(2)(3)+(1)(2)+(−1)(1)=7d=(2)(3)+(1)(2)+(-1)(1)=7d=(2)(3)+(1)(2)+(−1)(1)=7, so the equation is 3x+2y+z=73x+2y+z=73x+2y+z=7.

    • 1 mark for using d=a⋅nd=\mathbf{a}\cdot\mathbf{n}d=a⋅n to obtain d=7d=7d=7
    • 1 mark for writing 3x+2y+z=73x+2y+z=73x+2y+z=7
  4. 4.Determine[3 marks]

    Determine a vector equation of the plane x+2y−z=4x+2y-z=4x+2y−z=4.

    Show mark schemeHide mark scheme

    Model answer

    Let y=λy=\lambday=λ and z=μz=\muz=μ. Then x=4−2λ+μx=4-2\lambda+\mux=4−2λ+μ, so r=(400)+λ(−210)+μ(101)\mathbf{r}=\begin{pmatrix}4\\0\\0\end{pmatrix}+\lambda\begin{pmatrix}-2\\1\\0\end{pmatrix}+\mu\begin{pmatrix}1\\0\\1\end{pmatrix}r=​400​​+λ​−210​​+μ​101​​.

    • 1 mark for setting two variables equal to parameters, such as y=λy=\lambday=λ and z=μz=\muz=μ
    • 1 mark for solving to obtain x=4−2λ+μx=4-2\lambda+\mux=4−2λ+μ
    • 1 mark for writing the result as a point plus two direction vectors
  5. 5.Explain[2 marks]

    Explain why the two direction vectors in the vector equation of a plane must not be parallel.

    Show mark schemeHide mark scheme

    Model answer

    If the vectors were parallel, moving along either one would give the same direction. The points would then form only a line, not a flat surface.

    • 1 mark for stating that parallel vectors give only one direction
    • 1 mark for concluding that the points form a line rather than a plane
  6. 6.Describe[3 marks]

    Describe how to find a vector equation of the plane through three points that do not lie on one line.

    Show mark schemeHide mark scheme

    Model answer

    Take one point AAA as the fixed point. Find AB→\overrightarrow{AB}AB and AC→\overrightarrow{AC}AC by subtracting position vectors. Write r=a+λAB→+μAC→\mathbf{r}=\mathbf{a}+\lambda\overrightarrow{AB}+\mu\overrightarrow{AC}r=a+λAB+μAC.

    • 1 mark for choosing one of the points as the fixed point
    • 1 mark for finding two direction vectors by subtracting position vectors
    • 1 mark for writing the point plus two parameter multiples of the directions

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State how many non-parallel direction vectors are used in the vector equation of a plane.
Show answer and explanation

Answer: C · Worked explanation

Two non-parallel directions are needed to describe a flat surface. A single direction only gives a line, which is why one is not enough. A third direction is unnecessary, because the equation already reaches every point of the plane using two parameters.
4.

Medium·Calculate[1 mark]

The points are A(2,−1,3)A(2,-1,3)A(2,−1,3) and B(5,1,2)B(5,1,2)B(5,1,2). Calculate AB→\overrightarrow{AB}AB.
Show answer and explanation

Answer: A · Worked explanation

AB→=b−a=(5−2, 1−(−1), 2−3)=(3,2,−1)\overrightarrow{AB}=\mathbf{b}-\mathbf{a}=(5-2,\ 1-(-1),\ 2-3)=(3,2,-1)AB=b−a=(5−2, 1−(−1), 2−3)=(3,2,−1). The vector (−3,−2,1)(-3,-2,1)(−3,−2,1) is BA→\overrightarrow{BA}BA, found by subtracting in the wrong order. The vector (7,0,5)(7,0,5)(7,0,5) comes from adding the coordinates instead of subtracting them. Always take the end point minus the start point.
5.

Medium·Determine[1 mark]

A plane passes through (1,2,3)(1,2,3)(1,2,3) and has normal vector (2,−1,4)(2,-1,4)(2,−1,4). Its equation is 2x−y+4z=d2x-y+4z=d2x−y+4z=d. Determine ddd.
Show answer and explanation

Answer: C · Worked explanation

Use d=a⋅n=(1)(2)+(2)(−1)+(3)(4)=2−2+12=12d=\mathbf{a}\cdot\mathbf{n}=(1)(2)+(2)(-1)+(3)(4)=2-2+12=12d=a⋅n=(1)(2)+(2)(−1)+(3)(4)=2−2+12=12. The value 16 comes from treating (2)(−1)(2)(-1)(2)(−1) as +2+2+2, which gives 2+2+122+2+122+2+12. The value 6 is the sum of the point's coordinates, which ignores the normal. The constant ddd always needs the scalar product with n\mathbf{n}n.
6.

Medium·Identify[1 mark]

Identify the point that lies on the plane x+2y−z=4x+2y-z=4x+2y−z=4.
Show answer and explanation

Answer: C · Worked explanation

Substitute each point. For (2,1,0)(2,1,0)(2,1,0): 2+2−0=42+2-0=42+2−0=4, which matches. For (4,1,1)(4,1,1)(4,1,1): 4+2−1=54+2-1=54+2−1=5, so it fails. The point (1,1,1)(1,1,1)(1,1,1) gives 1+2−1=21+2-1=21+2−1=2 and (0,2,1)(0,2,1)(0,2,1) gives 0+4−1=30+4-1=30+4−1=3, so neither lies on the plane. Every coordinate must be tested, with the sign of zzz respected.
7.

Medium·Determine[2 marks]

Determine a Cartesian equation of the plane r=(100)+λ(110)+μ(011)\mathbf{r}=\begin{pmatrix}1\\0\\0\end{pmatrix}+\lambda\begin{pmatrix}1\\1\\0\end{pmatrix}+\mu\begin{pmatrix}0\\1\\1\end{pmatrix}r=​100​​+λ​110​​+μ​011​​.
Show answer and explanation

Answer: D · Worked explanation

The vector product of the directions is (1,−1,1)(1,-1,1)(1,−1,1), so the equation is x−y+z=dx-y+z=dx−y+z=d with d=a⋅n=1d=\mathbf{a}\cdot\mathbf{n}=1d=a⋅n=1. The equation x+y+z=1x+y+z=1x+y+z=1 uses the normal (1,1,1)(1,1,1)(1,1,1), which is not perpendicular to (1,1,0)(1,1,0)(1,1,0) because their scalar product is 2. A normal must give zero with every direction in the plane, so check this as well.
8.

Hard·Determine[2 marks]

A plane passes through A(0,1,1)A(0,1,1)A(0,1,1), B(2,1,0)B(2,1,0)B(2,1,0) and C(1,3,2)C(1,3,2)C(1,3,2). Determine its Cartesian equation.
Show answer and explanation

Answer: A · Worked explanation

AB→=(2,0,−1)\overrightarrow{AB}=(2,0,-1)AB=(2,0,−1) and AC→=(1,2,1)\overrightarrow{AC}=(1,2,1)AC=(1,2,1), so n=(2,−3,4)\mathbf{n}=(2,-3,4)n=(2,−3,4) and d=a⋅n=0−3+4=1d=\mathbf{a}\cdot\mathbf{n}=0-3+4=1d=a⋅n=0−3+4=1. The equation with -2, 3 and -4 reverses the normal but keeps d=1d=1d=1, so it describes a different plane. The choice 2x+3y+4z=72x+3y+4z=72x+3y+4z=7 fits AAA and BBB but fails for CCC, since 2+9+8=192+9+8=192+9+8=19.
9.

Hard·Identify[2 marks]

Identify a correct vector equation of the plane x+y+2z=6x+y+2z=6x+y+2z=6.
Show answer and explanation

Answer: B · Worked explanation

The point must satisfy the plane equation and each direction must be perpendicular to n=(1,1,2)\mathbf{n}=(1,1,2)n=(1,1,2). For the key, 6+0+0=66+0+0=66+0+0=6, (−1,1,0)⋅n=0(-1,1,0)\cdot\mathbf{n}=0(−1,1,0)⋅n=0 and (−2,0,1)⋅n=0(-2,0,1)\cdot\mathbf{n}=0(−2,0,1)⋅n=0. The option using (1,1,2)(1,1,2)(1,1,2) as a direction fails, because that vector is the normal itself and its scalar product with n\mathbf{n}n is 6.
10.

Hard·Deduce[2 marks]

Deduce the relationship between the planes 2x−y+3z=52x-y+3z=52x−y+3z=5 and 4x−2y+6z=104x-2y+6z=104x−2y+6z=10.
Show answer and explanation

Answer: C · Worked explanation

The second equation is the first multiplied by 2 on both sides. The normals are parallel and the constants match, so every point of one plane lies on the other. Distinct parallel planes would need the constant 10 to differ from 2×52\times52×5.

Keep going

Next topic3.18 Lines and planes: intersections and anglesPrevious topic3.16 Vector product

More in Topic 3 · Geometry and trigonometry

  1. 3.10Compound angle identitiesNotes · 10 questions· HL only
  2. 3.11Symmetry of trig graphsNotes · 10 questions· HL only
  3. 3.12Introduction to vectorsNotes · 10 questions· HL only
  4. 3.13Scalar productNotes · 10 questions· HL only
  5. 3.14Vector equations of linesNotes · 10 questions· HL only
  6. 3.15Intersecting and skew linesNotes · 10 questions· HL only
  7. 3.16Vector productNotes · 10 questions· HL only
  8. 3.17Vector equations of planesNotes · 10 questions· HL only
  9. 3.18Lines and planes: intersections and anglesNotes · 10 questions· HL only

All IB Mathematics: Analysis and Approaches topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1A plane is fixed by a point and two directions
  2. 2Three points on a plane give its two directions
  3. 3A normal vector gives the scalar product form
  4. 4The Cartesian equation comes from expanding the scalar product
  5. 5Converting from Cartesian to vector form uses parameters
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe