IB Mathematics: Applications and Interpretation · Topic 2 · Functions
2.10 Scaling and linearizing data
Linearise data from power and exponential models, plot the transformed variables, and interpret the gradient and intercept of the resulting line.
1/5A curve can be straightened by transforming the variables
- A curve can be straightened by transforming the variables
- Power models become straight when both variables are logged
- Exponential models become straight when only the output is logged
- The gradient and intercept recover the model’s constants
- The straightest graph shows which model to use
- Check your recall
- Practice: 10 questions
Part 1 of 5: A curve can be straightened by transforming the variables
A straight line is easy to judge by eye, but a curve is not. With a dozen points, you often cannot tell a power curve from an exponential one.
The fix is linearisation. You change the variables you plot, so that data from the right model fall on a straight line. The line’s equation then gives the constants of the model. Two common models are the power model and the exponential model.
The tool is the natural logarithm, written . It turns products into sums and powers into multiples. Two rules do the work: and .
Key terms · tap one for its definition
linearisation
Linearisation is the transformation of one or both variables so that data from a non-linear model lie along a straight line.
natural logarithm
The natural logarithm of , written , is the power to which must be raised to give .
Part 2 of 5: Power models become straight when both variables are logged
Doubling the side of a cube multiplies its volume by eight. This is a power model, , where varies as a power of . The constants and are fixed numbers.
Take natural logarithms of both sides. The rules give . This matches the line , with and . Here is the gradient and is the vertical intercept.
A graph of against is called a log–log graph. For a power model it is a straight line. Its gradient is and its vertical intercept is .
Key terms · tap one for its definition
power model
A power model has the form , where and are constants and .
log–log graph
A log–log graph plots against and is a straight line when .

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: B · Worked explanation
Part 3 of 5: Exponential models become straight when only the output is logged
Some quantities grow by a fixed factor in equal steps, like a population that doubles every hour. Each step multiplies by the same factor. These follow an exponential model, . The same model can be written .
Take natural logarithms: . Here is already linear in , so only needs transforming. A graph of against is a semi-log graph.
Which graph straightens which model
- Model
- Power,
- Graph to plot
- against
- Gradient
- Vertical intercept
- Model
- Exponential,
- Graph to plot
- against
- Gradient
- Vertical intercept
- Model
- Exponential,
- Graph to plot
- against
- Gradient
- Vertical intercept
The two graphs differ in what is logged. A power model needs both variables logged. An exponential model needs only logged.
Key terms · tap one for its definition
exponential model
An exponential model has the form , or , where , and are constants.
semi-log graph
A semi-log graph plots against and is a straight line when .
Part 4 of 5: The gradient and intercept recover the model’s constants
Now that each model has a straight-line form, a fitted line gives its constants. Draw the line of best fit through the transformed points. It should pass as close as possible to all of them. Read the gradient from two points that lie far apart on the line.
Wide separation matters, because small reading errors then have less effect. The vertical intercept gives . Reverse the logarithm with .
Worked example
Fitting a power model
- Calculate : . Calculate : .
- The points lie on a straight line, so a power model fits. Use the end points to find the gradient.
- Gradient: .
- The vertical intercept is 1.099, so and .
Answer: The model is , that is, .

Quick check
One question on the part you just read
Easy
Show answer and explanation
Answer: D · Worked explanation
Part 5 of 5: The straightest graph shows which model to use
Often the model is not known in advance. Try each graph and see which one gives a straight line. If none does, none of these models suits the data.
- against is straight: a linear model.
- against is straight: a power model.
- against is straight: an exponential model.
Worked example
Fitting an exponential model
- Take logarithms: . Plot against .
- Calculate : . These rise by almost equal steps, so the graph is straight.
- Gradient: , in .
- The intercept at is 5.011, so .
Answer: The model is , with in hours.
With a model found, you can predict values. Predictions inside the range of the data are more reliable than predictions outside it.
Check your recall[15 marks]
6 written questions. Answer each one in your head or on paper, then open the mark scheme.
- 1.State[3 marks]
State which graph linearises data that follow , and state what its gradient and vertical intercept represent.
Show mark schemeHide mark scheme
Model answer
Plot against . The gradient is and the vertical intercept is .
- 1 mark for stating that is plotted against
- 1 mark for stating that the gradient is
- 1 mark for stating that the vertical intercept is
- 2.Explain[3 marks]
Explain why a graph of against is a straight line when .
Show mark schemeHide mark scheme
Model answer
Taking logarithms gives . This has the form with and . The gradient and intercept are constants, so the graph is straight.
- 1 mark for taking logarithms to obtain
- 1 mark for matching this to the straight-line form
- 1 mark for stating that and are constants
- 3.Determine[3 marks]
A graph of against is a straight line with gradient 0.250 and vertical intercept 2.00. Determine and in the model .
Show mark schemeHide mark scheme
Model answer
The gradient gives . The intercept gives , so .
- 1 mark for identifying as the gradient, 0.250
- 1 mark for using from the intercept
- 1 mark for obtaining
- 4.Calculate[2 marks]
A model is . Calculate when .
Show mark schemeHide mark scheme
Model answer
.
- 1 mark for substituting to obtain
- 1 mark for obtaining
- 5.Distinguish[2 marks]
Distinguish between a log–log graph and a semi-log graph.
Show mark schemeHide mark scheme
Model answer
A log–log graph plots against and suits a power model. A semi-log graph plots against and suits an exponential model.
- 1 mark for stating that a log–log graph logs both variables and suits a power model
- 1 mark for stating that a semi-log graph logs only and suits an exponential model
- 6.Deduce[2 marks]
Deduce which model fits data when against is a straight line but against is curved.
Show mark schemeHide mark scheme
Model answer
A power model fits, because a straight log–log graph shows is linear in .
- 1 mark for deducing a power model
- 1 mark for linking this to being linear in

Practice this topic
10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)
0 right0 of 10 answered
Includes the 2 quick checks in the note above.
Easy[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumDetermine[1 mark]
Show answer and explanation
Answer: B · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
MediumDeduce[1 mark]
Show answer and explanation
Answer: A · Worked explanation
HardDetermine[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardPredict[2 marks]
Show answer and explanation
Answer: A · Worked explanation
HardState[2 marks]
Show answer and explanation
Answer: A · Worked explanation