Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Applications and Interpretation
  3. ›3 Geometry and trigonometry
  4. ›3.1 3D distance, volume and surface area

IB Mathematics: Applications and Interpretation · Topic 3 · Geometry and trigonometry

3.1 3D distance, volume and surface area

Calculate distances and midpoints in three dimensions, and find the volume and surface area of prisms, pyramids, cones, spheres and composite solids.

  • 6 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Pythagoras applied twice gives a distance across a box
  1. 1Pythagoras applied twice gives a distance across a box
  2. 2Coordinates give the distance between any two points in space
  3. 3A prism’s volume equals its base area times its height
  4. 4Cylinders, cones and spheres have volumes based on the radius
  5. 5Surface area adds the areas of all the outer faces
  6. 6Composite solids split into parts you already know
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Pythagoras applied twice gives a distance across a box

Picture the longest straight line inside a room, from one floor corner to the opposite ceiling corner. A tape measure cannot follow it, but Pythagoras’ theorem can. This line is the space diagonal of the room.

Call the room’s length aaa, width bbb and height hhh. The floor diagonal has length a2+b2\sqrt{a^2+b^2}a2+b2​. It forms the base of a second right-angled triangle whose upright side is hhh.

Applying Pythagoras’ theorem again gives the space diagonal, d=a2+b2+h2d=\sqrt{a^2+b^2+h^2}d=a2+b2+h2​. Use the same unit for all three lengths.

Figure 1. The space diagonal d joins opposite corners and passes through the inside of the cuboid.

Key term

space diagonal

The space diagonal of a cuboid is the line joining two opposite vertices, and its length is a2+b2+h2\sqrt{a^2+b^2+h^2}a2+b2+h2​.

Part 1 done

2

Part 2 of 6: Coordinates give the distance between any two points in space

Now suppose the two points are not corners of a box. Each point has three coordinates, written (x,y,z)(x,y,z)(x,y,z). The differences between matching coordinates play the role of the box’s three edges. Squaring makes each term positive, so the order of the points does not matter.

For P(x1,y1,z1)P(x_1,y_1,z_1)P(x1​,y1​,z1​) and Q(x2,y2,z2)Q(x_2,y_2,z_2)Q(x2​,y2​,z2​), the distance is d=(x2−x1)2+(y2−y1)2+(z2−z1)2d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2+(z_2-z_1)^2}d=(x2​−x1​)2+(y2​−y1​)2+(z2​−z1​)2​.

The midpoint of PQPQPQ lies halfway along the segment. Average each pair of coordinates to find it: (x1+x22,y1+y22,z1+z22)\left(\frac{x_1+x_2}{2},\frac{y_1+y_2}{2},\frac{z_1+z_2}{2}\right)(2x1​+x2​​,2y1​+y2​​,2z1​+z2​​).

Worked example

Distance and midpoint in three dimensions

A drone is at P(2,1,10)P(2,1,10)P(2,1,10) and the top of a tower is at Q(8,9,30)Q(8,9,30)Q(8,9,30), with all coordinates in metres. Find the distance PQPQPQ and the midpoint of PQPQPQ.
  1. 1
    Find the coordinate differences: 8−2=68-2=68−2=6, 9−1=89-1=89−1=8 and 30−10=2030-10=2030−10=20.
  2. 2
    Substitute: d=62+82+202=36+64+400d=\sqrt{6^2+8^2+20^2}=\sqrt{36+64+400}d=62+82+202​=36+64+400​.
  3. 3
    Simplify: d=500≈22.4 md=\sqrt{500}\approx22.4\,\mathrm{m}d=500​≈22.4m.
  4. 4
    Average the coordinates: (2+82,1+92,10+302)=(5,5,20)\left(\frac{2+8}{2},\frac{1+9}{2},\frac{10+30}{2}\right)=(5,5,20)(22+8​,21+9​,210+30​)=(5,5,20).

Answer: PQ≈22.4 mPQ\approx22.4\,\mathrm{m}PQ≈22.4m and the midpoint is (5,5,20)(5,5,20)(5,5,20).

Common mistake

The midpoint formula adds coordinates, but the distance formula subtracts them. Mixing the two is a common slip.

Key term

midpoint

The midpoint of a line segment is the point halfway between its endpoints, found by averaging each coordinate.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate the distance from (0,0,0)(0,0,0)(0,0,0) to (2,3,6)(2,3,6)(2,3,6).
Show answer and explanation

Answer: A · Worked explanation

Distance is 22+32+62=4+9+36=49=7\sqrt{2^2+3^2+6^2}=\sqrt{4+9+36}=\sqrt{49}=722+32+62​=4+9+36​=49​=7. The value 11 comes from adding the coordinates without squaring. The value 49 is the sum of squares before the square root is taken. Squaring each difference first keeps negative differences from cancelling positive ones. The square root is taken once, at the very end.
3

Part 3 of 6: A prism’s volume equals its base area times its height

The volume of a solid is the space it occupies. It is measured in cubic units, such as cm3\mathrm{cm^3}cm3 or m3\mathrm{m^3}m3.

Picture a pile of identical sheets of card. The volume is the area of one sheet times the height of the pile. This idea works for any prism, a solid with the same cross-section all along its length.

For a prism, V=AhV=AhV=Ah, where AAA is the area of the base and hhh is the perpendicular height. A cuboid has A=abA=abA=ab, so V=abhV=abhV=abh. A pyramid, which narrows to a point, has V=13AhV=\frac{1}{3}AhV=31​Ah.

Key terms · tap one for its definition

volume

The volume of a solid is the amount of three-dimensional space it occupies, measured in cubic units such as cm3\mathrm{cm^3}cm3.

prism

A prism is a solid with the same cross-section along its whole length, so its volume is base area times height.

Part 3 done

4

Part 4 of 6: Cylinders, cones and spheres have volumes based on the radius

Now consider solids with curved surfaces. Each formula uses the radius rrr, the distance from the centre to the edge of the circle or sphere.

A cylinder is a prism with a circular base, so V=πr2hV=\pi r^2hV=πr2h. A cone with the same base and height holds exactly one third as much: V=13πr2hV=\frac{1}{3}\pi r^2hV=31​πr2h.

A sphere has V=43πr3V=\frac{4}{3}\pi r^3V=34​πr3. Because rrr is cubed, doubling the radius multiplies the volume by eight. Each volume formula multiplies three lengths, which gives a quick check on any formula you recall.

Worked example

Volume of a cone

A cone has base radius 3.00 cm and vertical height 4.00 cm. Calculate its volume.
  1. 1
    Write the formula: V=13πr2hV=\frac{1}{3}\pi r^2hV=31​πr2h.
  2. 2
    Substitute: V=13×π×3.002×4.00V=\frac{1}{3}\times\pi\times3.00^2\times4.00V=31​×π×3.002×4.00.
  3. 3
    Simplify: V=12π≈37.7V=12\pi\approx37.7V=12π≈37.7.

Answer: V≈37.7 cm3V\approx37.7\,\mathrm{cm^3}V≈37.7cm3.

Key term

radius

The radius of a circle or sphere is the distance from its centre to its boundary, measured in length units.

Part 4 done

Quick check

One question on the part you just read

Easy

Determine the midpoint of (2,−4,6)(2,-4,6)(2,−4,6) and (8,0,−2)(8,0,-2)(8,0,−2).
Show answer and explanation

Answer: B · Worked explanation

Average each pair of coordinates: 2+82=5\frac{2+8}{2}=522+8​=5, −4+02=−2\frac{-4+0}{2}=-22−4+0​=−2 and 6+(−2)2=2\frac{6+(-2)}{2}=226+(−2)​=2. The point (10,−4,4)(10,-4,4)(10,−4,4) is the sum of the coordinates, which has not been halved. The point (6,4,−8)(6,4,-8)(6,4,−8) lists the coordinate differences, which belong to the distance formula. A check is that the midpoint is the same distance from both points.
5

Part 5 of 6: Surface area adds the areas of all the outer faces

Imagine painting a box. Paint covers every face, so you add the areas of all the faces. This total is the surface area, measured in square units such as cm2\mathrm{cm^2}cm2.

A solid with flat faces can be unfolded into a net. This is a flat shape that folds up to form the solid. The six faces of a cuboid give 2(ab+ah+bh)2(ab+ah+bh)2(ab+ah+bh). A cylinder unrolls into two circles and a rectangle with sides 2πr2\pi r2πr and hhh.

A cone’s curved surface has area πrl\pi rlπrl, where lll is the slant height. Pythagoras’ theorem gives l=r2+h2l=\sqrt{r^2+h^2}l=r2+h2​.

Volume and surface area of common solids

SolidVolumeSurface area
Cuboidabhabhabh2(ab+ah+bh)2(ab+ah+bh)2(ab+ah+bh)
Closed cylinderπr2h\pi r^2hπr2h2πr2+2πrh2\pi r^2+2\pi rh2πr2+2πrh
Closed cone13πr2h\frac{1}{3}\pi r^2h31​πr2hπr2+πrl\pi r^2+\pi rlπr2+πrl
Sphere43πr3\frac{4}{3}\pi r^334​πr34πr24\pi r^24πr2
Solid
Cuboid
Volume
abhabhabh
Surface area
2(ab+ah+bh)2(ab+ah+bh)2(ab+ah+bh)
Solid
Closed cylinder
Volume
πr2h\pi r^2hπr2h
Surface area
2πr2+2πrh2\pi r^2+2\pi rh2πr2+2πrh
Solid
Closed cone
Volume
13πr2h\frac{1}{3}\pi r^2h31​πr2h
Surface area
πr2+πrl\pi r^2+\pi rlπr2+πrl
Solid
Sphere
Volume
43πr3\frac{4}{3}\pi r^334​πr3
Surface area
4πr24\pi r^24πr2

Worked example

Surface area of a cone

A closed cone has base radius 3.00 cm and vertical height 4.00 cm. Calculate its total surface area.
  1. 1
    Find the slant height: l=3.002+4.002=5.00 cml=\sqrt{3.00^2+4.00^2}=5.00\,\mathrm{cm}l=3.002+4.002​=5.00cm.
  2. 2
    Curved area: πrl=π×3.00×5.00=15π\pi rl=\pi\times3.00\times5.00=15\piπrl=π×3.00×5.00=15π.
  3. 3
    Base area: πr2=π×3.002=9π\pi r^2=\pi\times3.00^2=9\piπr2=π×3.002=9π.
  4. 4
    Total area: 15π+9π=24π≈75.415\pi+9\pi=24\pi\approx75.415π+9π=24π≈75.4.

Answer: The surface area is 75.4 cm275.4\,\mathrm{cm^2}75.4cm2.

Common mistake

The slant height lll is not the vertical height hhh. Use lll for surface area and hhh for volume.

Key terms · tap one for its definition

surface area

The surface area of a solid is the total area of all its outer faces, measured in square units such as cm2\mathrm{cm^2}cm2.

net

A net is a flat arrangement of a solid’s faces that can be folded to form that solid.

slant height

The slant height of a cone is the distance from its apex to the edge of its base, measured along the curved surface.

Part 5 done

6

Part 6 of 6: Composite solids split into parts you already know

Real objects are rarely a single shape. A grain silo, for example, is a cylinder topped by half a sphere. This is a composite solid, made by joining simpler solids.

A hemisphere is half a sphere. Its volume is 23πr3\frac{2}{3}\pi r^332​πr3, and its curved surface area is 2πr22\pi r^22πr2. Add the volumes of the parts to find the total volume.

For surface area, count only the faces on the outside. A face where two parts join is hidden, so leave it out.

Worked example

A silo

A silo is a cylinder of radius 3.00 m and height 8.00 m, topped by a hemisphere of the same radius. Calculate its volume and its outer surface area, excluding the base.
  1. 1
    Cylinder volume: πr2h=π×3.002×8.00=72π\pi r^2h=\pi\times3.00^2\times8.00=72\piπr2h=π×3.002×8.00=72π.
  2. 2
    Hemisphere volume: 23πr3=23×π×3.003=18π\frac{2}{3}\pi r^3=\frac{2}{3}\times\pi\times3.00^3=18\pi32​πr3=32​×π×3.003=18π.
  3. 3
    Total volume: 72π+18π=90π≈283 m372\pi+18\pi=90\pi\approx283\,\mathrm{m^3}72π+18π=90π≈283m3.
  4. 4
    Cylinder side: 2πrh=2π×3.00×8.00=48π2\pi rh=2\pi\times3.00\times8.00=48\pi2πrh=2π×3.00×8.00=48π. Dome: 2πr2=18π2\pi r^2=18\pi2πr2=18π. The base and the join are excluded.
  5. 5
    Outer area: 48π+18π=66π≈207 m248\pi+18\pi=66\pi\approx207\,\mathrm{m^2}48π+18π=66π≈207m2.

Answer: Volume ≈283 m3\approx283\,\mathrm{m^3}≈283m3 and outer surface area ≈207 m2\approx207\,\mathrm{m^2}≈207m2.

Exam tip

Keep every length in one unit before you start. Convert first, since 1 m3=1 000 000 cm31\,\mathrm{m^3}=1\,000\,000\,\mathrm{cm^3}1m3=1000000cm3. Round only at the end.

Key terms · tap one for its definition

composite solid

A composite solid is a solid made by joining two or more simpler solids.

hemisphere

A hemisphere is half of a sphere, bounded by a curved surface and a flat circular face.

Note read

Check your recall[14 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the formulae for the distance between P(x1,y1,z1)P(x_1,y_1,z_1)P(x1​,y1​,z1​) and Q(x2,y2,z2)Q(x_2,y_2,z_2)Q(x2​,y2​,z2​), and for the midpoint of PQPQPQ.

    Show mark schemeHide mark scheme

    Model answer

    Distance =(x2−x1)2+(y2−y1)2+(z2−z1)2=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2+(z_2-z_1)^2}=(x2​−x1​)2+(y2​−y1​)2+(z2​−z1​)2​. Midpoint =(x1+x22,y1+y22,z1+z22)=\left(\frac{x_1+x_2}{2},\frac{y_1+y_2}{2},\frac{z_1+z_2}{2}\right)=(2x1​+x2​​,2y1​+y2​​,2z1​+z2​​).

    • 1 mark for writing the distance formula correctly
    • 1 mark for writing the midpoint as the average of each pair of coordinates
  2. 2.Calculate[3 marks]

    Calculate the distance between (1,−2,4)(1,-2,4)(1,−2,4) and (5,2,6)(5,2,6)(5,2,6), with coordinates in centimetres.

    Show mark schemeHide mark scheme

    Model answer

    d=(5−1)2+(2−(−2))2+(6−4)2=16+16+4=36=6 cmd=\sqrt{(5-1)^2+(2-(-2))^2+(6-4)^2}=\sqrt{16+16+4}=\sqrt{36}=6\,\mathrm{cm}d=(5−1)2+(2−(−2))2+(6−4)2​=16+16+4​=36​=6cm.

    • 1 mark for finding the three coordinate differences 4, 4 and 2
    • 1 mark for substituting into the distance formula to obtain 36\sqrt{36}36​
    • 1 mark for stating the distance as 6 cm6\,\mathrm{cm}6cm
  3. 3.Determine[3 marks]

    Determine the volume of a sphere of radius 6.00 cm.

    Show mark schemeHide mark scheme

    Model answer

    V=43πr3=43×π×6.003=288π≈905 cm3V=\frac{4}{3}\pi r^3=\frac{4}{3}\times\pi\times6.00^3=288\pi\approx905\,\mathrm{cm^3}V=34​πr3=34​×π×6.003=288π≈905cm3.

    • 1 mark for stating V=43πr3V=\frac{4}{3}\pi r^3V=34​πr3
    • 1 mark for substituting r=6.00r=6.00r=6.00 correctly
    • 1 mark for obtaining 905 cm3905\,\mathrm{cm^3}905cm3
  4. 4.Distinguish[2 marks]

    Distinguish between the slant height and the vertical height of a cone.

    Show mark schemeHide mark scheme

    Model answer

    The vertical height is the perpendicular distance from the apex to the base. The slant height is measured along the curved surface from the apex to the edge of the base, so it is longer.

    • 1 mark for stating that the vertical height is the perpendicular distance from apex to base
    • 1 mark for stating that the slant height is measured along the curved surface to the edge of the base
  5. 5.Explain[2 marks]

    Explain why the surface area of a composite solid is not the sum of the surface areas of its parts.

    Show mark schemeHide mark scheme

    Model answer

    Where two parts join, their faces are hidden inside the solid. Those faces are not on the outside, so they must be left out of the total.

    • 1 mark for stating that faces where parts join are hidden
    • 1 mark for stating that only outer faces count towards the surface area
  6. 6.Deduce[2 marks]

    Deduce the factor by which the volume of a sphere changes when its radius is doubled.

    Show mark schemeHide mark scheme

    Model answer

    Volume is proportional to r3r^3r3, so doubling the radius multiplies the volume by 23=82^3=823=8.

    • 1 mark for using V∝r3V\propto r^3V∝r3
    • 1 mark for obtaining a factor of 8

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·State[1 mark]

State the volume of a cone as a fraction of the volume of a cylinder with the same base and height.
Show answer and explanation

Answer: C · Worked explanation

The cone formula is 13πr2h\frac{1}{3}\pi r^2h31​πr2h and the cylinder formula is πr2h\pi r^2hπr2h, so the cone holds one third as much. One half is a common guess from the triangle area formula, but it does not apply to a cone. With r=3r=3r=3 and h=4h=4h=4, the cone has volume 12π12\pi12π and the cylinder 36π36\pi36π, again one third.
4.

Medium·Calculate[1 mark]

Calculate the length of the space diagonal of a cuboid measuring 4.0 cm by 3.0 cm by 12 cm.
Show answer and explanation

Answer: A · Worked explanation

d=4.02+3.02+122=16+9+144=169=13 cmd=\sqrt{4.0^2+3.0^2+12^2}=\sqrt{16+9+144}=\sqrt{169}=13\,\mathrm{cm}d=4.02+3.02+122​=16+9+144​=169​=13cm. The value 19 is the sum of the three edges. The value 169 is the sum of squares, left without the square root. The floor diagonal is 5.0 cm, and then 5.02+122=13\sqrt{5.0^2+12^2}=135.02+122​=13, which confirms the result.
5.

Medium·Calculate[2 marks]

A triangular prism has a right-angled triangular cross-section with perpendicular sides 6.0 cm and 4.0 cm. Its length is 10 cm. Calculate its volume.
Show answer and explanation

Answer: C · Worked explanation

The cross-section area is 12×6.0×4.0=12 cm2\frac{1}{2}\times6.0\times4.0=12\,\mathrm{cm^2}21​×6.0×4.0=12cm2, so V=Ah=12×10=120 cm3V=Ah=12\times10=120\,\mathrm{cm^3}V=Ah=12×10=120cm3. The value 240 forgets the half in the triangle’s area. The value 40 wrongly applies the pyramid’s factor of one third to a prism. Always use the triangle’s own area as AAA, not the area of the surrounding rectangle.
6.

Medium·Calculate[1 mark]

A cylinder has radius 5.00 cm and height 12.0 cm. Calculate its volume.
Show answer and explanation

Answer: D · Worked explanation

V=πr2h=π×5.002×12.0=300π≈942 cm3V=\pi r^2h=\pi\times5.00^2\times12.0=300\pi\approx942\,\mathrm{cm^3}V=πr2h=π×5.002×12.0=300π≈942cm3. The value 3770 comes from using the diameter, 10.0 cm, as the radius. The value 377 is the curved surface area 2πrh2\pi rh2πrh, a different quantity measured in square units. The base area is πr2\pi r^2πr2, and this is multiplied by the height hhh.
7.

Medium·Calculate[1 mark]

Calculate the surface area of a sphere with radius 2.00 cm.
Show answer and explanation

Answer: A · Worked explanation

4πr2=4π×2.002=16π≈50.3 cm24\pi r^2=4\pi\times2.00^2=16\pi\approx50.3\,\mathrm{cm^2}4πr2=4π×2.002=16π≈50.3cm2. The value 33.5 is the sphere’s volume, 43πr3\frac{4}{3}\pi r^334​πr3, which is measured in cubic units. The value 12.6 is 4π4\pi4π, which forgets to square the radius. Square units belong to areas, and cubic units belong to volumes, so units give a quick check on the formula used.
8.

Hard·Calculate[2 marks]

A solid is a cylinder of radius 2.00 cm and height 5.00 cm, with a hemisphere of the same radius fixed to one end. Calculate its total volume.
Show answer and explanation

Answer: D · Worked explanation

Cylinder: π×2.002×5.00=20π\pi\times2.00^2\times5.00=20\piπ×2.002×5.00=20π. Hemisphere: 23π×2.003=163π\frac{2}{3}\pi\times2.00^3=\frac{16}{3}\pi32​π×2.003=316​π. The total is 763π≈79.6 cm3\frac{76}{3}\pi\approx79.6\,\mathrm{cm^3}376​π≈79.6cm3. Adding a whole sphere instead of half gives 96.3, a frequent slip. The cylinder and hemisphere share the same radius, so only one radius is needed in the working.
9.

Hard·Determine[2 marks]

The radius of a sphere increases from 3.0 cm to 6.0 cm. Determine the factors by which its surface area and its volume change.
Show answer and explanation

Answer: B · Worked explanation

Surface area depends on r2r^2r2, so doubling the radius multiplies it by 22=42^2=422=4. Volume depends on r3r^3r3, so it is multiplied by 23=82^3=823=8. A doubled area treats area as proportional to rrr, which it is not. As a check, the area rises from 36π36\pi36π to 144π144\pi144π and the volume from 36π36\pi36π to 288π288\pi288π.
10.

Hard·Determine[2 marks]

The distance between (2,−1,3)(2,-1,3)(2,−1,3) and (k,3,−1)(k,3,-1)(k,3,−1) is 9. Determine the positive value of kkk.
Show answer and explanation

Answer: D · Worked explanation

81=(k−2)2+42+(−4)2=(k−2)2+3281=(k-2)^2+4^2+(-4)^2=(k-2)^2+3281=(k−2)2+42+(−4)2=(k−2)2+32, so (k−2)2=49(k-2)^2=49(k−2)2=49 and k−2=±7k-2=\pm7k−2=±7. The positive solution is k=9k=9k=9, and the other solution is -5. The value 7 stops at k−2k-2k−2 and forgets to add the 2. Substituting back, 72+42+42=81=927^2+4^2+4^2=81=9^272+42+42=81=92, so the distance is 9, as required. This confirms the answer.

Keep going

Next topic3.2 Trigonometry in trianglesPrevious topic2.10 Scaling and linearizing data

More in Topic 3 · Geometry and trigonometry

  1. 3.13D distance, volume and surface areaNotes · 10 questions
  2. 3.2Trigonometry in trianglesNotes · 10 questions
  3. 3.3Applications of trigonometryNotes · 10 questions
  4. 3.4Arcs and sectorsNotes · 10 questions
  5. 3.5Perpendicular bisectorsNotes · 10 questions
  6. 3.6Voronoi diagramsNotes · 10 questions
  7. 3.7Radian measureNotes · 10 questions· HL only
  8. 3.8Unit circle and identitiesNotes · 10 questions· HL only
  9. 3.9Matrix transformationsNotes · 10 questions· HL only

All IB Mathematics: Applications and Interpretation topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/6 read

  1. 1Pythagoras applied twice gives a distance across a box
  2. 2Coordinates give the distance between any two points in space
  3. 3A prism’s volume equals its base area times its height
  4. 4Cylinders, cones and spheres have volumes based on the radius
  5. 5Surface area adds the areas of all the outer faces
  6. 6Composite solids split into parts you already know
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe