Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Applications and Interpretation
  3. ›3 Geometry and trigonometry
  4. ›3.4 Arcs and sectors

IB Mathematics: Applications and Interpretation · Topic 3 · Geometry and trigonometry

3.4 Arcs and sectors

Calculate the length of an arc and the area of a sector from an angle and a radius, and apply both formulae to real situations.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5An arc is a fraction of a circle’s edge
  1. 1An arc is a fraction of a circle’s edge
  2. 2Arc length is the same fraction of the circumference
  3. 3Sector area is the same fraction of the circle’s area
  4. 4A sector’s perimeter includes both straight edges
  5. 5Real problems may need a rearranged formula
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: An arc is a fraction of a circle’s edge

Think of a slice of pizza. The curved crust is part of the whole edge, and the slice is part of the whole pizza. Maths gives names to both parts.

Every point on a circle is the same distance from its centre. That distance is the radius, written rrr. The distance all the way round is the circumference, C=2πrC=2\pi rC=2πr.

An arc is any part of the circumference. A sector is the region between an arc and the two radii drawn to its ends. The angle between those radii is written θ\thetaθ and is measured in degrees here.

Figure 1. The shaded sector lies between two radii of length r. Its arc has length l, and the angle at the centre is θ.

Key terms · tap one for its definition

radius

A radius is the distance from a circle’s centre to its edge.

arc

An arc is a continuous part of a circle’s circumference between two points on the circle.

sector

A sector is the region of a circle enclosed by one arc and the two radii drawn to its ends.

Part 1 done

2

Part 2 of 5: Arc length is the same fraction of the circumference

Now that the parts have names, the next step is to measure them. A full turn is 360∘360^{\circ}360∘. A sector with angle θ\thetaθ is the fraction θ360\frac{\theta}{360}360θ​ of the whole circle.

A 90∘90^{\circ}90∘ sector is one quarter of the circle, so its arc is one quarter of the circumference. The same idea works for any angle. Arc length is therefore l=θ360×2πrl=\frac{\theta}{360}\times2\pi rl=360θ​×2πr.

Worked example

Calculate an arc length

A sector has radius 8.0 cm8.0\,\mathrm{cm}8.0cm and angle 140∘140^{\circ}140∘. Calculate the arc length.
  1. 1
    Arc length is the fraction of the circle multiplied by the circumference.
  2. 2
    l=θ360×2πrl=\frac{\theta}{360}\times2\pi rl=360θ​×2πr
  3. 3
    l=140360×2π×8.0 cml=\frac{140}{360}\times2\pi\times8.0\,\mathrm{cm}l=360140​×2π×8.0cm
  4. 4
    l=0.3889×50.27 cm=19.55 cml=0.3889\times50.27\,\mathrm{cm}=19.55\,\mathrm{cm}l=0.3889×50.27cm=19.55cm (before rounding)

Answer: The arc length is 19.5 cm19.5\,\mathrm{cm}19.5cm to 3 significant figures.

Exam tip

Keep the fraction exact until the last step. Rounding it early can change the final digit of your answer.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the fraction of a circle’s circumference that forms the arc of a sector with a centre angle of 60∘60^{\circ}60∘.
Show answer and explanation

Answer: C · Worked explanation

The fraction is 60360=16\frac{60}{360}=\frac{1}{6}36060​=61​, because a full turn is 360∘360^{\circ}360∘. The value 13\frac{1}{3}31​ would belong to a 120∘120^{\circ}120∘ sector, and 1360\frac{1}{360}3601​ would be the fraction for a 1∘1^{\circ}1∘ sector, not a 60∘60^{\circ}60∘ one.
3

Part 3 of 5: Sector area is the same fraction of the circle’s area

The same fraction also applies to the space inside the sector. A whole circle has area πr2\pi r^2πr2, the amount of flat space it covers.

A sector with angle θ\thetaθ takes the fraction θ360\frac{\theta}{360}360θ​ of that space. Its area AAA is A=θ360×πr2A=\frac{\theta}{360}\times\pi r^2A=360θ​×πr2. The units are squared units, such as cm2\mathrm{cm^2}cm2.

Check the result against the whole circle. A 180∘180^{\circ}180∘ sector should have half the area πr2\pi r^2πr2, and a 90∘90^{\circ}90∘ sector should have a quarter. An answer larger than the full circle means the angle or radius is wrong.

Worked example

Calculate a sector area

A sector has radius 5.0 cm5.0\,\mathrm{cm}5.0cm and angle 72∘72^{\circ}72∘. Calculate its area.
  1. 1
    Sector area is the fraction of the circle multiplied by the circle’s area.
  2. 2
    A=θ360×πr2A=\frac{\theta}{360}\times\pi r^2A=360θ​×πr2
  3. 3
    A=72360×π×(5.0 cm)2A=\frac{72}{360}\times\pi\times(5.0\,\mathrm{cm})^2A=36072​×π×(5.0cm)2
  4. 4
    A=0.2×78.54 cm2=15.71 cm2A=0.2\times78.54\,\mathrm{cm^2}=15.71\,\mathrm{cm^2}A=0.2×78.54cm2=15.71cm2 (before rounding)

Answer: The sector area is 15.7 cm215.7\,\mathrm{cm^2}15.7cm2 to 3 significant figures.

Common mistake

Using the diameter as rrr doubles every arc length and multiplies every sector area by four. Halve a given diameter first.

Key term

area

Area measures the size of a two-dimensional region.

Part 3 done

4

Part 4 of 5: A sector’s perimeter includes both straight edges

So far each formula measured one part of a sector. A fence around a sector-shaped flowerbed needs the whole boundary.

The perimeter of a shape is the total length of its boundary. A sector’s boundary has three parts: the arc and two radii.

The perimeter is therefore the arc length plus two radii, P=l+2rP=l+2rP=l+2r. Always add both straight edges.

Everyday boundaries work this way. A curved garden bed with straight sides needs edging along all three parts.

Worked example

Find the perimeter of a sector

A sector has radius 6.0 cm6.0\,\mathrm{cm}6.0cm and angle 150∘150^{\circ}150∘. Find its perimeter.
  1. 1
    Find the arc length: l=150360×2π×6.0 cm=15.71 cml=\frac{150}{360}\times2\pi\times6.0\,\mathrm{cm}=15.71\,\mathrm{cm}l=360150​×2π×6.0cm=15.71cm.
  2. 2
    Find the two radii: 2r=2×6.0 cm=12.0 cm2r=2\times6.0\,\mathrm{cm}=12.0\,\mathrm{cm}2r=2×6.0cm=12.0cm.
  3. 3
    Add the three lengths: P=l+2r=15.71 cm+12.0 cm=27.71 cmP=l+2r=15.71\,\mathrm{cm}+12.0\,\mathrm{cm}=27.71\,\mathrm{cm}P=l+2r=15.71cm+12.0cm=27.71cm.

Answer: The perimeter is 27.7 cm27.7\,\mathrm{cm}27.7cm to 3 significant figures.

Exam tip

Perimeter is a length, so write cm\mathrm{cm}cm and not cm2\mathrm{cm^2}cm2. Area units belong only to sector area.

Key term

perimeter

The perimeter of a shape is the total length of its boundary, measured in units of length.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the formula for the area AAA of a sector with radius rrr and angle θ\thetaθ in degrees.
Show answer and explanation

Answer: D · Worked explanation

A sector takes the fraction θ360\frac{\theta}{360}360θ​ of the circle’s area πr2\pi r^2πr2. The expression with 2πr2\pi r2πr is the arc length formula, which gives a length rather than an area. The expression with θ180\frac{\theta}{180}180θ​ doubles the correct fraction.
5

Part 5 of 5: Real problems may need a rearranged formula

Arc and sector formulae appear in everyday settings. A windscreen wiper sweeps a sector, and a garden sprinkler waters one. Sometimes the angle or the radius is the unknown. Read the question to decide which formula fits: a length needs the arc formula, and a region needs the area formula.

Rearranging the area formula gives θ=360Aπr2\theta=\frac{360A}{\pi r^2}θ=πr2360A​. Rearranging the arc formula gives θ=360 l2πr\theta=\frac{360\,l}{2\pi r}θ=2πr360l​. Substitute the known values, then solve.

Check that the answer is sensible. An angle in a sector must lie between 0∘0^{\circ}0∘ and 360∘360^{\circ}360∘. A radius must be positive, and its unit must be a unit of length.

Worked example

Find an angle from an area

A sprinkler waters a sector of radius 4.00 m4.00\,\mathrm{m}4.00m. The watered area is 20.0 m220.0\,\mathrm{m^2}20.0m2. Calculate the angle of the sector.
  1. 1
    Rearrange the area formula: θ=360Aπr2\theta=\frac{360A}{\pi r^2}θ=πr2360A​.
  2. 2
    θ=360×20.0 m2π×(4.00 m)2\theta=\frac{360\times20.0\,\mathrm{m^2}}{\pi\times(4.00\,\mathrm{m})^2}θ=π×(4.00m)2360×20.0m2​
  3. 3
    θ=720050.27=143.2∘\theta=\frac{7200}{50.27}=143.2^{\circ}θ=50.277200​=143.2∘ (before rounding)

Answer: The angle is 143∘143^{\circ}143∘ to 3 significant figures.

Go deeperFinding the area of a segment

A segment is the region between an arc and the straight line joining its ends. Its area is the sector area minus the area of the triangle formed by the two radii and that line.

For an angle θ\thetaθ below 180∘180^{\circ}180∘, the triangle has area 12r2sin⁡θ\frac{1}{2}r^2\sin\theta21​r2sinθ. The segment area is then θ360×πr2−12r2sin⁡θ\frac{\theta}{360}\times\pi r^2-\frac{1}{2}r^2\sin\theta360θ​×πr2−21​r2sinθ.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[2 marks]

    State the formulae for the arc length lll and the sector area AAA of a sector with radius rrr and angle θ\thetaθ in degrees.

    Show mark schemeHide mark scheme

    Model answer

    l=θ360×2πrl=\frac{\theta}{360}\times2\pi rl=360θ​×2πr and A=θ360×πr2A=\frac{\theta}{360}\times\pi r^2A=360θ​×πr2.

    • 1 mark for writing the arc length formula l=θ360×2πrl=\frac{\theta}{360}\times2\pi rl=360θ​×2πr
    • 1 mark for writing the sector area formula A=θ360×πr2A=\frac{\theta}{360}\times\pi r^2A=360θ​×πr2
  2. 2.Calculate[3 marks]

    Calculate the length of an arc of a circle with radius 12 cm12\,\mathrm{cm}12cm and centre angle 40∘40^{\circ}40∘.

    Show mark schemeHide mark scheme

    Model answer

    l=40360×2π×12 cm=8.38 cml=\frac{40}{360}\times2\pi\times12\,\mathrm{cm}=8.38\,\mathrm{cm}l=36040​×2π×12cm=8.38cm to 3 significant figures.

    • 1 mark for writing l=40360×2π×12l=\frac{40}{360}\times2\pi\times12l=36040​×2π×12
    • 1 mark for evaluating to 8.38
    • 1 mark for giving the unit cm\mathrm{cm}cm
  3. 3.Calculate[3 marks]

    Calculate the area of a sector with radius 10.0 m10.0\,\mathrm{m}10.0m and angle 216∘216^{\circ}216∘.

    Show mark schemeHide mark scheme

    Model answer

    A=216360×π×(10.0 m)2=0.6×314.2 m2=189 m2A=\frac{216}{360}\times\pi\times(10.0\,\mathrm{m})^2=0.6\times314.2\,\mathrm{m^2}=189\,\mathrm{m^2}A=360216​×π×(10.0m)2=0.6×314.2m2=189m2 to 3 significant figures.

    • 1 mark for using the fraction 216360\frac{216}{360}360216​ with πr2\pi r^2πr2
    • 1 mark for evaluating the area as about 188.5
    • 1 mark for giving 189 with the unit m2\mathrm{m^2}m2
  4. 4.Distinguish[2 marks]

    Distinguish between an arc and a sector.

    Show mark schemeHide mark scheme

    Model answer

    An arc is a part of the circumference, a curved line. A sector is a region enclosed by an arc and two radii.

    • 1 mark for stating that an arc is part of the circumference or a curved line
    • 1 mark for stating that a sector is a region bounded by an arc and two radii
  5. 5.Determine[3 marks]

    Determine the angle of a sector with radius 9.00 cm9.00\,\mathrm{cm}9.00cm and arc length 15.0 cm15.0\,\mathrm{cm}15.0cm.

    Show mark schemeHide mark scheme

    Model answer

    θ=360×15.02π×9.00=95.5∘\theta=\frac{360\times15.0}{2\pi\times9.00}=95.5^{\circ}θ=2π×9.00360×15.0​=95.5∘ to 3 significant figures.

    • 1 mark for rearranging to θ=360 l2πr\theta=\frac{360\,l}{2\pi r}θ=2πr360l​
    • 1 mark for substituting l=15.0l=15.0l=15.0 and r=9.00r=9.00r=9.00 correctly
    • 1 mark for obtaining 95.5∘95.5^{\circ}95.5∘
  6. 6.Calculate[2 marks]

    Calculate the perimeter of a sector with radius 5.0 cm5.0\,\mathrm{cm}5.0cm and angle 72∘72^{\circ}72∘.

    Show mark schemeHide mark scheme

    Model answer

    Arc length =72360×2π×5.0=6.28 cm=\frac{72}{360}\times2\pi\times5.0=6.28\,\mathrm{cm}=36072​×2π×5.0=6.28cm. Perimeter =6.28+2×5.0=16.3 cm=6.28+2\times5.0=16.3\,\mathrm{cm}=6.28+2×5.0=16.3cm.

    • 1 mark for finding the arc length as about 6.28 cm
    • 1 mark for adding 2r2r2r to obtain 16.3 cm16.3\,\mathrm{cm}16.3cm

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate the arc length of a quarter of a circle with radius 6 cm6\,\mathrm{cm}6cm.
Show answer and explanation

Answer: D · Worked explanation

A quarter circle has θ=90∘\theta=90^{\circ}θ=90∘, so l=90360×2π×6=9.42 cml=\frac{90}{360}\times2\pi\times6=9.42\,\mathrm{cm}l=36090​×2π×6=9.42cm. The value 37.7 is the whole circumference, which forgets to take a quarter. The value 28.3 is the sector area in cm2\mathrm{cm^2}cm2, not a length.
4.

Medium·Calculate[2 marks]

Calculate the arc length of a sector with radius 7.5 cm7.5\,\mathrm{cm}7.5cm and angle 80∘80^{\circ}80∘.
Show answer and explanation

Answer: D · Worked explanation

l=80360×2π×7.5=10.47l=\frac{80}{360}\times2\pi\times7.5=10.47l=36080​×2π×7.5=10.47, which is 10.5 cm10.5\,\mathrm{cm}10.5cm to 3 significant figures. The value 20.9 comes from treating the diameter 15 cm15\,\mathrm{cm}15cm as the radius. The value 5.24 comes from using πr\pi rπr instead of 2πr2\pi r2πr.
5.

Medium·Calculate[2 marks]

Calculate the area of a sector with radius 9 cm9\,\mathrm{cm}9cm and angle 50∘50^{\circ}50∘.
Show answer and explanation

Answer: D · Worked explanation

A=50360×π×92=35.34A=\frac{50}{360}\times\pi\times9^2=35.34A=36050​×π×92=35.34, so the area is 35.3 cm235.3\,\mathrm{cm^2}35.3cm2. The value 7.85 is the arc length, found with 2πr2\pi r2πr rather than πr2\pi r^2πr2. The value 141 comes from using the diameter 18 cm18\,\mathrm{cm}18cm as the radius.
6.

Medium·Calculate[2 marks]

Calculate the perimeter of a sector with radius 12 cm12\,\mathrm{cm}12cm and angle 30∘30^{\circ}30∘.
Show answer and explanation

Answer: A · Worked explanation

The arc length is 30360×2π×12=6.283 cm\frac{30}{360}\times2\pi\times12=6.283\,\mathrm{cm}36030​×2π×12=6.283cm. The perimeter adds two radii: 6.283+24=30.3 cm6.283+24=30.3\,\mathrm{cm}6.283+24=30.3cm. The value 6.28 is the arc alone. The value 18.3 adds only one radius to the arc. Always check that both straight edges are included before choosing, because the arc alone gives only part of the boundary.
7.

Medium·Determine[2 marks]

Determine the angle of a sector with radius 8.00 cm8.00\,\mathrm{cm}8.00cm and arc length 10.0 cm10.0\,\mathrm{cm}10.0cm.
Show answer and explanation

Answer: D · Worked explanation

Rearranging gives θ=360×10.02π×8.00=71.6∘\theta=\frac{360\times10.0}{2\pi\times8.00}=71.6^{\circ}θ=2π×8.00360×10.0​=71.6∘. The value 143 comes from using πr\pi rπr in the denominator instead of 2πr2\pi r2πr. The value 0.199 forgets to multiply by 360, and 450 comes from dividing arc length by radius and multiplying by 360.
8.

Hard·Calculate[2 marks]

A sector has area 30.0 cm230.0\,\mathrm{cm^2}30.0cm2 and angle 100∘100^{\circ}100∘. Calculate its radius.
Show answer and explanation

Answer: D · Worked explanation

Rearranging gives r2=360×30.0100π=34.38r^2=\frac{360\times30.0}{100\pi}=34.38r2=100π360×30.0​=34.38, so r=5.86 cmr=5.86\,\mathrm{cm}r=5.86cm. The value 34.4 is r2r^2r2, because the square root was not taken. The value 10.4 comes from leaving π\piπ out of the rearrangement. Substituting back with r=5.86r=5.86r=5.86 gives a sector area of about 30.0, which matches the given value.
9.

Hard·Determine[2 marks]

A sector has radius 8.00 cm8.00\,\mathrm{cm}8.00cm and perimeter 30.0 cm30.0\,\mathrm{cm}30.0cm. Determine its angle.
Show answer and explanation

Answer: C · Worked explanation

The two radii total 16.0 cm16.0\,\mathrm{cm}16.0cm, so the arc length is 14.0 cm14.0\,\mathrm{cm}14.0cm. Then θ=360×14.02π×8.00=100∘\theta=\frac{360\times14.0}{2\pi\times8.00}=100^{\circ}θ=2π×8.00360×14.0​=100∘. The value 215 treats the whole perimeter as the arc length. The value 158 subtracts only one radius.
10.

Hard·Calculate[2 marks]

A wiper arm of length 60 cm60\,\mathrm{cm}60cm carries a blade covering the distances from 20 cm20\,\mathrm{cm}20cm to 60 cm60\,\mathrm{cm}60cm from the pivot. It sweeps through 100∘100^{\circ}100∘. Calculate the area the blade sweeps.
Show answer and explanation

Answer: B · Worked explanation

Subtract the inner sector from the outer one: 100360×π×(602−202)=0.2778×π×3200=2790 cm2\frac{100}{360}\times\pi\times(60^2-20^2)=0.2778\times\pi\times3200=2790\,\mathrm{cm^2}360100​×π×(602−202)=0.2778×π×3200=2790cm2. The value 3140 ignores the inner sector. The value 1400 squares the difference of the radii instead of subtracting the squares.

Keep going

Next topic3.5 Perpendicular bisectorsPrevious topic3.3 Applications of trigonometry

More in Topic 3 · Geometry and trigonometry

  1. 3.13D distance, volume and surface areaNotes · 10 questions
  2. 3.2Trigonometry in trianglesNotes · 10 questions
  3. 3.3Applications of trigonometryNotes · 10 questions
  4. 3.4Arcs and sectorsNotes · 10 questions
  5. 3.5Perpendicular bisectorsNotes · 10 questions
  6. 3.6Voronoi diagramsNotes · 10 questions
  7. 3.7Radian measureNotes · 10 questions· HL only
  8. 3.8Unit circle and identitiesNotes · 10 questions· HL only
  9. 3.9Matrix transformationsNotes · 10 questions· HL only

All IB Mathematics: Applications and Interpretation topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1An arc is a fraction of a circle’s edge
  2. 2Arc length is the same fraction of the circumference
  3. 3Sector area is the same fraction of the circle’s area
  4. 4A sector’s perimeter includes both straight edges
  5. 5Real problems may need a rearranged formula
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe