Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Mathematics: Applications and Interpretation
  3. ›4 Statistics and probability
  4. ›4.3 Measures of central tendency and spread

IB Mathematics: Applications and Interpretation · Topic 4 · Statistics and probability

4.3 Measures of central tendency and spread

Calculate and interpret the mean, median, mode, range, interquartile range and standard deviation, and choose which measures suit a data set.

  • 6 min read
  • 6 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/6Mean, median and mode each describe a typical value
  1. 1Mean, median and mode each describe a typical value
  2. 2Grouped data gives only an estimate of the mean
  3. 3Range and interquartile range measure how spread out data are
  4. 4Standard deviation measures the typical distance from the mean
  5. 5Outliers and skew decide which measures best describe data
  6. 6Changing every value changes the measures in a predictable way
  7. Check your recall
  8. Practice: 10 questions
1

Part 1 of 6: Mean, median and mode each describe a typical value

Seven friends compare how many messages they sent today. One number is needed to summarise them. The mean is the sum of the values divided by how many there are, xˉ=∑xn\bar{x}=\frac{\sum x}{n}xˉ=n∑x​.

The median is the middle value when the data are in order. The mode is the value that occurs most often.

Use the mean when values are fairly even. Use the median when a few extreme values would distort the picture. The mode suits data where the most common value matters, such as a popular shoe size.

Worked example

Three averages

Find the mean, median and mode of 3, 5, 5, 6, 8, 9 and 20.
  1. 1
    The sum is 3+5+5+6+8+9+20=563+5+5+6+8+9+20=563+5+5+6+8+9+20=56, and n=7n=7n=7.
  2. 2
    Mean: xˉ=567=8\bar{x}=\frac{56}{7}=8xˉ=756​=8.
  3. 3
    The 4th value of seven is the middle one, so the median is 6.
  4. 4
    The value 5 appears twice and the others once, so the mode is 5.

Answer: The mean is 8, the median is 6 and the mode is 5.

Common mistake

A data set can have no mode, or more than one. The mean need not be a value in the data set.

Key terms · tap one for its definition

mean

The mean is the sum of all values divided by the number of values, written xˉ=∑xn\bar{x}=\frac{\sum x}{n}xˉ=n∑x​ for nnn values.

median

The median is the middle value of ordered data, or the mean of the two middle values when there is an even number of values.

mode

The mode is the value that occurs most often in a data set.

Part 1 done

2

Part 2 of 6: Grouped data gives only an estimate of the mean

Sometimes data arrive in class intervals, so the individual values are unknown. To estimate the mean, assume every value sits at the midpoint of its interval. Multiply each midpoint xxx by its frequency fff, add the products and divide by n=∑fn=\sum fn=∑f.

This gives xˉ≈∑fxn\bar{x}\approx\frac{\sum fx}{n}xˉ≈n∑fx​. The modal class is the interval with the highest frequency. The median lies in the interval that contains the middle value.

A calculator can find xˉ\bar{x}xˉ from a list of midpoints and frequencies. The result is an estimate, because the true values inside each interval are unknown.

Worked example

Mean of grouped data

Time spent online, in hours, has frequencies 4, 9, 5 and 2 in the intervals 0≤x<100\le x<100≤x<10, 10≤x<2010\le x<2010≤x<20, 20≤x<3020\le x<3020≤x<30 and 30≤x<4030\le x<4030≤x<40. Estimate the mean and state the modal class.
  1. 1
    The midpoints are 5, 15, 25 and 35, and n=4+9+5+2=20n=4+9+5+2=20n=4+9+5+2=20.
  2. 2
    ∑fx=4×5+9×15+5×25+2×35=20+135+125+70=350\sum fx=4\times5+9\times15+5\times25+2\times35=20+135+125+70=350∑fx=4×5+9×15+5×25+2×35=20+135+125+70=350.
  3. 3
    xˉ≈35020=17.5\bar{x}\approx\frac{350}{20}=17.5xˉ≈20350​=17.5.
  4. 4
    The highest frequency is 9, so the modal class is 10≤x<2010\le x<2010≤x<20.

Answer: The mean is about 17.5 h17.5\,\mathrm{h}17.5h, and the modal class is 10≤x<2010\le x<2010≤x<20.

Key terms · tap one for its definition

midpoint

The midpoint of a class interval is the mean of its lower and upper boundaries.

modal class

The modal class is the class interval with the greatest frequency.

Part 2 done

Quick check

One question on the part you just read

Easy

Calculate the mean of 2, 3, 5 and 10.
Show answer and explanation

Answer: B · Worked explanation

The sum is 20 and there are 4 values, so the mean is 204=5\frac{20}{4}=5420​=5. A value of 4 is the median, and 8 is the range. Always check a mean against the spread of the values, since it must lie between the smallest and largest.
3

Part 3 of 6: Range and interquartile range measure how spread out data are

Two data sets can share a mean yet look very different. The values 4, 5 and 6 sit close together. The values 1, 5 and 9 do not. A measure of spread shows the difference.

The range is the largest value minus the smallest. It is quick to find, but it uses only two values, so a single extreme value changes it a lot.

The quartiles divide ordered data into four equal parts. The interquartile range is Q3−Q1Q_3-Q_1Q3​−Q1​, the spread of the middle half. It ignores extreme values. Technology gives the quartiles directly, and small differences from a hand method can occur, so show the values you use.

Worked example

Range and interquartile range

Find the range and interquartile range of 3, 5, 5, 6, 8, 9 and 20.
  1. 1
    Range: 20−3=1720-3=1720−3=17.
  2. 2
    The lower half 3, 5, 5 has median 5, so Q1=5Q_1=5Q1​=5. The upper half 8, 9, 20 has median 9, so Q3=9Q_3=9Q3​=9.
  3. 3
    Interquartile range: 9−5=49-5=49−5=4.

Answer: The range is 17 and the interquartile range is 4.

Key terms · tap one for its definition

range

The range is the difference between the largest and smallest values in a data set.

interquartile range

The interquartile range is the upper quartile minus the lower quartile, Q3−Q1Q_3-Q_1Q3​−Q1​, and measures the spread of the middle half of the data.

Part 3 done

4

Part 4 of 6: Standard deviation measures the typical distance from the mean

Range and interquartile range use only a few values. The standard deviation σ\sigmaσ uses all of them. It measures the typical distance of values from the mean. A small σ\sigmaσ means the values cluster near the mean. A large σ\sigmaσ means they are widely scattered.

For nnn values, σ=∑(x−xˉ)2n\sigma=\sqrt{\frac{\sum(x-\bar{x})^2}{n}}σ=n∑(x−xˉ)2​​. The variance is σ2\sigma^2σ2. For grouped data, replace (x−xˉ)2(x-\bar{x})^2(x−xˉ)2 with f(x−xˉ)2f(x-\bar{x})^2f(x−xˉ)2, using midpoints. In practice, use technology, which gives σ\sigmaσ with nnn in the denominator.

Worked example

Standard deviation by hand

Find the standard deviation of 4, 6, 8, 10 and 12.
  1. 1
    The mean is xˉ=405=8\bar{x}=\frac{40}{5}=8xˉ=540​=8.
  2. 2
    The deviations are -4, -2, 0, 2 and 4. Their squares are 16, 4, 0, 4 and 16.
  3. 3
    The sum of squares is 40, so the variance is 405=8\frac{40}{5}=8540​=8.
  4. 4
    σ=8≈2.83\sigma=\sqrt{8}\approx2.83σ=8​≈2.83.

Answer: The standard deviation is about 2.83 and the variance is 8.

Exam tip

The standard deviation has the same units as the data. The variance has those units squared.

Key terms · tap one for its definition

standard deviation

The standard deviation σ\sigmaσ is a measure of spread given by ∑(x−xˉ)2n\sqrt{\frac{\sum(x-\bar{x})^2}{n}}n∑(x−xˉ)2​​, with the same units as the data.

variance

The variance is the square of the standard deviation, σ2\sigma^2σ2, and its units are the data’s units squared.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the measure that is least affected by one very large outlier.
Show answer and explanation

Answer: A · Worked explanation

The median depends on the middle position, so one extreme value barely moves it. The mean, range and standard deviation all use the extreme value directly. Outliers are the reason the median and interquartile range are preferred for skewed data.
5

Part 5 of 6: Outliers and skew decide which measures best describe data

The best measures depend on the shape of the data. A skewed distribution has its values trailing out further on one side. Extreme values pull the mean towards the long tail, while the median stays near the bulk of the data. A long tail towards larger values is called positive skew, and a tail towards smaller values is negative skew.

Figure 1. The single value 20 pulls the mean to 8, while the median stays at 6 among the cluster.

The median and interquartile range are little affected by extreme values. The mean, range and standard deviation are strongly affected. The table shows which pair to use.

Choosing measures

Shape of the dataBetter measures
Roughly symmetric, no outliersMean and standard deviation
Skewed, or with outliersMedian and interquartile range
Shape of the data
Roughly symmetric, no outliers
Better measures
Mean and standard deviation
Shape of the data
Skewed, or with outliers
Better measures
Median and interquartile range

Key term

skewed distribution

A skewed distribution is a distribution whose values trail out further on one side of the centre than the other.

Part 5 done

6

Part 6 of 6: Changing every value changes the measures in a predictable way

Suppose every score in a test is raised by 5 marks, or doubled. The measures change by simple rules. Take y=ax+by=ax+by=ax+b with a>0a>0a>0, where aaa and bbb are constants.

Effect of y=ax+by=ax+by=ax+b on each measure

MeasureNew value
Mean and medianaxˉ+ba\bar{x}+baxˉ+b and a×a\timesa× median + b+\,b+b
Standard deviationaσa\sigmaaσ
Range and interquartile rangea×a\timesa× old value
Measure
Mean and median
New value
axˉ+ba\bar{x}+baxˉ+b and a×a\timesa× median + b+\,b+b
Measure
Standard deviation
New value
aσa\sigmaaσ
Measure
Range and interquartile range
New value
a×a\timesa× old value

Raising every mark by 5 moves the mean and median up by 5. The standard deviation stays the same, because the gaps between marks are unchanged. Doubling every mark doubles both the mean and the standard deviation.

Worked example

Transforming a data set

A data set has mean 12 and standard deviation 3. Find the mean and standard deviation of y=2x+5y=2x+5y=2x+5.
  1. 1
    The new mean is 2×12+5=292\times12+5=292×12+5=29.
  2. 2
    The new standard deviation is 2×3=62\times3=62×3=6, because adding 5 does not change the spread.

Answer: The mean is 29 and the standard deviation is 6.

Common mistake

Adding a constant to every value does not change the spread. Only multiplying does.

Note read

Check your recall[15 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[3 marks]

    Calculate the mean and the median of 2, 4, 4, 5, 7, 9 and 11.

    Show mark schemeHide mark scheme

    Model answer

    The sum is 42 and n=7n=7n=7, so the mean is 427=6\frac{42}{7}=6742​=6. The middle value is the 4th, so the median is 5.

    • 1 mark for finding the sum of 42
    • 1 mark for obtaining a mean of 6
    • 1 mark for obtaining a median of 5
  2. 2.Determine[3 marks]

    Determine an estimate of the mean for frequencies 6, 10 and 4 in the intervals 0≤x<200\le x<200≤x<20, 20≤x<4020\le x<4020≤x<40 and 40≤x<6040\le x<6040≤x<60.

    Show mark schemeHide mark scheme

    Model answer

    The midpoints are 10, 30 and 50, and n=20n=20n=20. Then ∑fx=60+300+200=560\sum fx=60+300+200=560∑fx=60+300+200=560, so the estimated mean is 56020=28\frac{560}{20}=2820560​=28.

    • 1 mark for using midpoints 10, 30 and 50
    • 1 mark for finding ∑fx=560\sum fx=560∑fx=560 and n=20n=20n=20
    • 1 mark for obtaining an estimate of 28
  3. 3.Calculate[3 marks]

    Calculate the standard deviation of 1, 3, 5 and 7, using σ=∑(x−xˉ)2n\sigma=\sqrt{\frac{\sum(x-\bar{x})^2}{n}}σ=n∑(x−xˉ)2​​.

    Show mark schemeHide mark scheme

    Model answer

    The mean is 4. The squared deviations are 9, 1, 1 and 9, which sum to 20. Then σ=204=5≈2.24\sigma=\sqrt{\frac{20}{4}}=\sqrt{5}\approx2.24σ=420​​=5​≈2.24.

    • 1 mark for finding the mean as 4
    • 1 mark for finding the sum of squared deviations as 20
    • 1 mark for obtaining σ≈2.24\sigma\approx2.24σ≈2.24
  4. 4.Explain[2 marks]

    Explain why the median is often preferred to the mean for a skewed data set.

    Show mark schemeHide mark scheme

    Model answer

    Extreme values in the long tail pull the mean towards them. The median is little affected, so it stays closer to the bulk of the data.

    • 1 mark for stating that extreme values pull the mean towards the tail
    • 1 mark for stating that the median is little affected by extreme values
  5. 5.Deduce[2 marks]

    Deduce the new mean and standard deviation when each value in a data set with mean 12 and standard deviation 3 is multiplied by 3 and then increased by 2.

    Show mark schemeHide mark scheme

    Model answer

    The new mean is 3×12+2=383\times12+2=383×12+2=38. The new standard deviation is 3×3=93\times3=93×3=9, because adding 2 does not change the spread.

    • 1 mark for obtaining a new mean of 38
    • 1 mark for obtaining a new standard deviation of 9
  6. 6.Compare[2 marks]

    Compare two classes, where Class A has mean 60 and standard deviation 5, and Class B has mean 60 and standard deviation 12.

    Show mark schemeHide mark scheme

    Model answer

    The means are equal, so the typical marks are the same. Class B has the larger standard deviation, so its marks are more spread out.

    • 1 mark for stating that the means are equal
    • 1 mark for stating that Class B’s marks are more spread out, with the larger standard deviation

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

A frequency table gives 4 values in 0≤x<50\le x<50≤x<5, 11 in 5≤x<105\le x<105≤x<10, 7 in 10≤x<1510\le x<1510≤x<15 and 3 in 15≤x<2015\le x<2015≤x<20. Identify the modal class.
Show answer and explanation

Answer: C · Worked explanation

The modal class has the greatest frequency, which is 11. The interval 10≤x<1510\le x<1510≤x<15 has the second highest frequency, so it is not modal. Read the frequency column, not the interval boundaries, to find the modal class, and ignore the width of each interval.
4.

Medium·Calculate[2 marks]

Frequencies 2, 6, 8 and 4 fall in the intervals 0≤x<100\le x<100≤x<10, 10≤x<2010\le x<2010≤x<20, 20≤x<3020\le x<3020≤x<30 and 30≤x<4030\le x<4030≤x<40. Calculate an estimate of the mean.
Show answer and explanation

Answer: B · Worked explanation

The midpoints are 5, 15, 25 and 35, so ∑fx=10+90+200+140=440\sum fx=10+90+200+140=440∑fx=10+90+200+140=440 and xˉ≈44020=22\bar{x}\approx\frac{440}{20}=22xˉ≈20440​=22. A value of 20 averages the midpoints without weighting them by frequency. Always weight each midpoint by its frequency, since intervals with more values count for more.
5.

Medium·Predict[2 marks]

Machine A fills bags with mean 500 g and standard deviation 4 g. Machine B has mean 500 g and standard deviation 9 g. Predict which statement is correct.
Show answer and explanation

Answer: D · Worked explanation

A smaller standard deviation means values cluster nearer the mean. Equal means do not imply equal spread. Standard deviation says nothing about how many bags exceed 500 g. Equal means only tell you about the centre, and the standard deviation is the measure of consistency.
6.

Medium·Determine[2 marks]

A frequency table gives scores 1, 2, 3 and 4 with frequencies 4, 7, 5 and 4. Determine the median score.
Show answer and explanation

Answer: A · Worked explanation

There are 20 values, so the median is the mean of the 10th and 11th. The scores 1 take positions 1 to 4, and the scores 2 take positions 5 to 11, so both are 2. The value 2.45 is the mean.
7.

Medium·Calculate[2 marks]

Calculate the standard deviation of 3, 5, 5, 5, 6, 6, 8 and 10, using the formula with nnn in the denominator.
Show answer and explanation

Answer: D · Worked explanation

The mean is 6. The squared deviations sum to 32, so the variance is 328=4\frac{32}{8}=4832​=4 and σ=4=2\sigma=\sqrt{4}=2σ=4​=2. The value 4 is the variance, and 32 is the sum of squared deviations. Always divide by nnn here, and take the square root at the end to return to the original units.
8.

Hard·Determine[2 marks]

The values 10, 12, 13, 15 and 16 change when 16 is replaced by 46. Determine which statement is correct.
Show answer and explanation

Answer: B · Worked explanation

The total rises by 30 over 5 values, so the mean rises by 305=6\frac{30}{5}=6530​=6. The middle value stays 13. An increase of 30 is the change in the total, not in the mean. Always compare the sums of the values, since a change in one value shifts the total, and the mean follows from the total.
9.

Hard·Determine[2 marks]

Six numbers have mean 9. A seventh number is added, and the mean of all seven is 10. Determine the seventh number.
Show answer and explanation

Answer: C · Worked explanation

The first six sum to 6×9=546\times9=546×9=54, and all seven sum to 7×10=707\times10=707×10=70. The seventh number is 70−54=1670-54=1670−54=16. A value of 7 comes from dividing 70 by 10, and 10 is just the new mean. Setting the new total minus the old total equal to the unknown value is the efficient route here.
10.

Hard·Deduce[2 marks]

A data set has mean 20 and standard deviation 4. Every value xxx is replaced by 3x−53x-53x−5. Deduce the new mean and standard deviation.
Show answer and explanation

Answer: A · Worked explanation

The mean becomes 3×20−5=553\times20-5=553×20−5=55. Multiplying by 3 scales the spread to 3×4=123\times4=123×4=12, and subtracting 5 does not change it. A value of 7 wrongly subtracts 5 from the standard deviation. Check by noting that the constant term affects the centre only, while the multiplier affects both.

Keep going

Next topic4.4 Correlation and regressionPrevious topic4.2 Presenting data

More in Topic 4 · Statistics and probability

  1. 4.1Sampling conceptsNotes · 10 questions
  2. 4.2Presenting dataNotes · 10 questions
  3. 4.3Measures of central tendency and spreadNotes · 10 questions
  4. 4.4Correlation and regressionNotes · 10 questions
  5. 4.5Probability conceptsNotes · 10 questions
  6. 4.6Combined events and diagramsNotes · 10 questions
  7. 4.7Discrete random variablesNotes · 10 questions
  8. 4.8Binomial distributionNotes · 10 questions
  9. 4.9Normal distributionNotes · 10 questions

All IB Mathematics: Applications and Interpretation topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/6 read

  1. 1Mean, median and mode each describe a typical value
  2. 2Grouped data gives only an estimate of the mean
  3. 3Range and interquartile range measure how spread out data are
  4. 4Standard deviation measures the typical distance from the mean
  5. 5Outliers and skew decide which measures best describe data
  6. 6Changing every value changes the measures in a predictable way
  7. Check your recall
  8. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe