Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›A Space, time and motion
  4. ›A.1 Kinematics

IB Physics · Theme A · Space, time and motion

A.1 Kinematics

Define motion quantities, interpret motion graphs, and solve constant-acceleration problems.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Direction distinguishes vector quantities from scalar quantities
  1. 1Direction distinguishes vector quantities from scalar quantities
  2. 2Velocity describes changing position and acceleration describes changing velocity
  3. 3Motion graphs show rates through gradients and changes through areas
  4. 4Average values describe intervals while instantaneous values describe moments
  5. 5Constant acceleration links displacement, time and velocity
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Direction distinguishes vector quantities from scalar quantities

A scalar has magnitude but no direction. Distance and speed are scalars. A vector has both magnitude and direction. Displacement, velocity and acceleration are vectors. Choose a positive direction before describing motion along a line. Motion in the opposite direction then has a negative vector value. A negative value does not mean the object moves slowly.

Distance is the total length travelled. Displacement is the change in position from start to finish. Walking 3 m east and then 2 m west gives a distance of 5 m. The displacement is 1 m east. Distance cannot be negative, but displacement can have a negative component.

Common mistake

Distance and displacement are not interchangeable. Returning to your starting position gives zero displacement, even after travelling a distance.

Key terms · tap one for its definition

scalar

A scalar quantity has magnitude but no direction.

vector

A vector quantity has both magnitude and direction.

displacement

Displacement is the vector change in position from an initial position to a final position.

Part 1 done

2

Part 2 of 5: Velocity describes changing position and acceleration describes changing velocity

Velocity is the rate of change of displacement. For motion along a line, average velocity is displacementtime taken\frac{\text{displacement}}{\text{time taken}}time takendisplacement​. Acceleration is the rate of change of velocity. Average acceleration is change in velocitytime taken\frac{\text{change in velocity}}{\text{time taken}}time takenchange in velocity​. Velocity has units of m s−1\rm m\,s^{-1}ms−1; acceleration has units of m s−2\rm m\,s^{-2}ms−2.

A cyclist travelling east at 4 m s⁻¹ has an eastward velocity. If that velocity increases, the acceleration points east. If the cyclist slows while still travelling east, the acceleration points west. Acceleration describes how velocity changes, not just how fast an object moves. Turning also changes velocity because its direction changes, even when speed stays constant.

Key terms · tap one for its definition

velocity

Velocity is the rate of change of displacement with time.

acceleration

Acceleration is the rate of change of velocity with time.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity that is a scalar.
Show answer and explanation

Answer: D · Worked explanation

Distance is a scalar because it has magnitude but no direction. Displacement, velocity and acceleration are vectors, so each includes direction as well as magnitude. A negative value can describe a vector component in the chosen negative direction; it does not make distance negative.
3

Part 3 of 5: Motion graphs show rates through gradients and changes through areas

On a displacement–time graph, gradient gives velocity. A steeper line shows greater speed; a negative gradient shows motion in the negative direction. The gradient of a tangent gives instantaneous velocity on a curved graph. On a velocity–time graph, gradient gives acceleration. Its signed area between the line and time axis gives displacement. The total area magnitude gives distance travelled when sections below the axis are counted positively.

On an acceleration–time graph, signed area gives change in velocity. Sketch these graphs by checking each interval. Constant velocity gives a straight displacement–time line and zero acceleration. Constant, non-zero acceleration gives a straight, sloping velocity–time line and a horizontal acceleration–time line.

Figure 1. The curves describe the same motion. Compare gradients and areas across the three graphs.

Exam tip

State whether an area represents displacement or distance. Areas below a velocity–time axis count negatively for displacement.

Key terms · tap one for its definition

displacement–time graph

A displacement–time graph plots displacement against time; its gradient gives velocity.

velocity–time graph

A velocity–time graph plots velocity against time; its gradient gives acceleration and its signed area gives displacement.

acceleration–time graph

An acceleration–time graph plots acceleration against time; its signed area gives change in velocity.

Part 3 done

4

Part 4 of 5: Average values describe intervals while instantaneous values describe moments

Average speed equals total distance divided by total time. Average velocity instead uses displacement divided by total time. For a return trip, average velocity can be zero while average speed is positive. These averages describe the whole interval, not necessarily the motion at any particular moment.

Instantaneous velocity describes motion at one moment. It is the gradient of the tangent to a displacement–time graph. Instantaneous speed is the magnitude of instantaneous velocity. A speedometer indicates instantaneous speed, not average speed. For example, an object may briefly stop during a trip while its average speed remains positive. To calculate a graph gradient, divide the change on the vertical axis by the change on the horizontal axis. Keep the axis units in the result.

Key terms · tap one for its definition

average speed

Average speed is total distance travelled divided by total time taken.

instantaneous velocity

Instantaneous velocity is the rate of change of displacement at a particular moment.

Part 4 done

Quick check

One question on the part you just read

Easy

State what displacement describes for an object moving along a straight line.
Show answer and explanation

Answer: B · Worked explanation

Displacement is the change in position from the initial position to the final position, including direction. The total length of the path is distance, which can differ from displacement if the object changes direction. Distance per unit time describes average speed, while change in velocity per unit time describes acceleration.
5

Part 5 of 5: Constant acceleration links displacement, time and velocity

The equations of motion apply when acceleration is constant along the chosen line. Let uuu be initial velocity, vvv final velocity, aaa acceleration, ttt elapsed time and sss displacement. Use consistent units and assign signs before substituting. Choose an equation containing the known quantities and the quantity needed.

  • v=u+atv=u+atv=u+at
  • s=ut+12at2s=ut+\frac{1}{2}at^2s=ut+21​at2
  • s=u+v2ts=\frac{u+v}{2}ts=2u+v​t
  • v2=u2+2asv^2=u^2+2asv2=u2+2as

Worked example

Finding stopping time and displacement

A vehicle travels east at 20 m s⁻¹. It slows uniformly at 4 m s⁻² until it stops. Find its stopping time and displacement.
  1. 1
    Take east as positive: u=20 m s−1u=20\,\mathrm{m\,s^{-1}}u=20ms−1, v=0v=0v=0 and a=−4 m s−2a=-4\,\mathrm{m\,s^{-2}}a=−4ms−2.
  2. 2
    Use v=u+atv=u+atv=u+at: 0=20−4t0=20-4t0=20−4t, so t=5 st=5\,\mathrm{s}t=5s.
  3. 3
    Use s=u+v2ts=\frac{u+v}{2}ts=2u+v​t: s=20+02×5=50 ms=\frac{20+0}{2}\times5=50\,\mathrm{m}s=220+0​×5=50m.

Answer: The vehicle stops after 5 s, with a displacement of 50 m east.

Common mistake

Do not use these equations when acceleration changes. Split the motion into intervals if acceleration is constant within each interval.

Key term

equations of motion

The equations of motion relate displacement, velocities, time and acceleration when acceleration is constant.

Note read

Check your recall[16 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Distinguish[2 marks]

    Distinguish between distance and displacement using a return trip.

    Show mark schemeHide mark scheme

    Model answer

    Distance is the total path length and remains positive. Displacement is the change in position, so a return trip has zero displacement.

    • 1 mark for identifying distance as total path length
    • 1 mark for identifying displacement as change in position and stating that it is zero for a return trip
  2. 2.Explain[2 marks]

    Explain why an object moving east can have westward acceleration.

    Show mark schemeHide mark scheme

    Model answer

    Its eastward velocity may be decreasing. Acceleration points west because the change in velocity points west.

    • 1 mark for stating that the eastward velocity decreases
    • 1 mark for linking the direction of acceleration to the direction of the velocity change
  3. 3.Describe[3 marks]

    Describe how to find velocity and acceleration from motion graphs.

    Show mark schemeHide mark scheme

    Model answer

    Velocity is the gradient of a displacement–time graph. A tangent gives instantaneous velocity. Acceleration is the gradient of a velocity–time graph.

    • 1 mark for identifying the displacement–time gradient as velocity
    • 1 mark for using a tangent to find instantaneous velocity on a curved displacement–time graph
    • 1 mark for identifying the velocity–time gradient as acceleration
  4. 4.Explain[3 marks]

    Explain how velocity–time and acceleration–time graphs give changes in motion.

    Show mark schemeHide mark scheme

    Model answer

    Signed area beneath a velocity–time graph gives displacement. Counting areas below its axis positively instead gives total distance. Signed area beneath an acceleration–time graph gives change in velocity.

    • 1 mark for identifying signed area on a velocity–time graph as displacement
    • 1 mark for explaining that total distance counts areas below the velocity axis positively
    • 1 mark for identifying signed area on an acceleration–time graph as change in velocity
  5. 5.Calculate[3 marks]

    Calculate the average speed and average velocity for a 30 m eastward trip followed by 10 m westward in 20 s.

    Show mark schemeHide mark scheme

    Model answer

    The distance is 40 m, giving an average speed of 2 m s⁻¹. The displacement is 20 m east, giving an average velocity of 1 m s⁻¹ east.

    • 1 mark for finding the total distance of 40 m and average speed of 2 m s⁻¹
    • 1 mark for finding the displacement of 20 m east
    • 1 mark for finding the average velocity of 1 m s⁻¹ east
  6. 6.Calculate[3 marks]

    Calculate the time and displacement when an object accelerates uniformly from rest at 2 m s⁻² to 8 m s⁻¹.

    Show mark schemeHide mark scheme

    Model answer

    Using v=u+atv=u+atv=u+at, 8=0+2t8=0+2t8=0+2t, so t=4 st=4\,\mathrm{s}t=4s. Then s=u+v2t=0+82×4=16 ms=\frac{u+v}{2}t=\frac{0+8}{2}\times4=16\,\mathrm{m}s=2u+v​t=20+8​×4=16m.

    • 1 mark for using v=u+atv=u+atv=u+at to find a time of 4 s
    • 1 mark for applying a suitable constant-acceleration equation for displacement
    • 1 mark for obtaining a displacement of 16 m

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

On a displacement–time graph, what does the gradient of a straight section represent?
Show answer and explanation

Answer: A · Worked explanation

The gradient of a displacement–time graph is the change in displacement divided by the change in time, so it represents velocity. Acceleration is found from the gradient of a velocity–time graph. The displacement at a particular time is read from the vertical coordinate, not from the gradient.
4.

Easy·Identify[1 mark]

A vehicle’s speedometer reads 18 m s−118\,\text{m s}^{-1}18m s−1 at one instant. Which quantity does this reading represent?
Show answer and explanation

Answer: B · Worked explanation

A speedometer gives the vehicle’s instantaneous speed: the magnitude of its velocity at that moment. Average speed requires the total distance and total time for an interval, while average velocity uses displacement and time. A speed reading does not give displacement, which is a change in position.
5.

Medium·Calculate[1 mark]

A walker travels 120 m120\,\text{m}120m north, then 50 m50\,\text{m}50m south, taking 34 s34\,\text{s}34s in total. Calculate the walker’s average velocity.
Show answer and explanation

Answer: C · Worked explanation

The displacement is 120−50=70 m120-50=70\,\text{m}120−50=70m north. Average velocity is displacement divided by elapsed time, so 70/34=2.1 m s−170/34=2.1\,\text{m s}^{-1}70/34=2.1m s−1 north to two significant figures. The tempting value 5.0 m s−15.0\,\text{m s}^{-1}5.0m s−1 north comes from dividing the total distance, 170 m170\,\text{m}170m, by time; that gives average speed instead.
6.

Medium·Determine[2 marks]

A velocity–time graph shows an object moving at a constant velocity of 3 m s−13\,\text{m s}^{-1}3m s−1 from t=0t=0t=0 to 4 s4\,\text{s}4s, then at −2 m s−1-2\,\text{m s}^{-1}−2m s−1 from t=4t=4t=4 to 7 s7\,\text{s}7s. Determine its displacement over the full 7 s7\,\text{s}7s.
Show answer and explanation

Answer: C · Worked explanation

Displacement is the signed area under the velocity–time graph. In the first interval it is 3×4=12 m3\times4=12\,\text{m}3×4=12m; in the second it is (−2)×3=−6 m(-2)\times3=-6\,\text{m}(−2)×3=−6m. The total is 12−6=6 m12-6=6\,\text{m}12−6=6m. The tempting 18 m18\,\text{m}18m adds both area magnitudes and gives the total distance, not displacement.
7.

Medium·Deduce[1 mark]

A displacement–time graph curves upwards, and its gradient becomes more positive as time passes. What can be deduced about the object’s motion in the positive direction?
Show answer and explanation

Answer: B · Worked explanation

The gradient of a displacement–time graph represents velocity. A gradient that becomes more positive therefore means the velocity in the positive direction is increasing. Constant velocity would require a constant gradient, while decreasing displacement would correspond to a negative gradient.
8.

Medium·Calculate[2 marks]

A trolley has an initial velocity of 5 m s−15\,\text{m s}^{-1}5m s−1 and accelerates uniformly at 1.5 m s−21.5\,\text{m s}^{-2}1.5m s−2 for 4.0 s4.0\,\text{s}4.0s. Calculate its displacement during this time.
Show answer and explanation

Answer: C · Worked explanation

For constant acceleration, s=ut+12at2=(5)(4.0)+12(1.5)(4.0)2=20+12=32 ms=ut+\frac{1}{2}at^2=(5)(4.0)+\frac{1}{2}(1.5)(4.0)^2=20+12=32\,\text{m}s=ut+21​at2=(5)(4.0)+21​(1.5)(4.0)2=20+12=32m.
9.

Medium·Calculate[2 marks]

A toy car starts from rest and accelerates uniformly at 2.5 m s−22.5\,\text{m s}^{-2}2.5m s−2 for 6.0 s6.0\,\text{s}6.0s. Calculate its final velocity.
Show answer and explanation

Answer: D · Worked explanation

The car starts from rest, so u=0u=0u=0. Using v=u+atv=u+atv=u+at gives v=0+(2.5)(6.0)=15 m s−1v=0+(2.5)(6.0)=15\,\text{m s}^{-1}v=0+(2.5)(6.0)=15m s−1. The value 2.5 m s−12.5\,\text{m s}^{-1}2.5m s−1 is the acceleration, not the final velocity; multiplying acceleration by elapsed time is necessary to find the velocity change.
10.

Hard·Determine[2 marks]

A cart moves in the positive direction at 12 m s−112\,\text{m s}^{-1}12m s−1. It accelerates uniformly at −3.0 m s−2-3.0\,\text{m s}^{-2}−3.0m s−2 for 5.0 s5.0\,\text{s}5.0s. Determine its final velocity and displacement during this interval.
Show answer and explanation

Answer: D · Worked explanation

Using v=u+atv=u+atv=u+at gives v=12+(−3.0)(5.0)=−3.0 m s−1v=12+(-3.0)(5.0)=-3.0\,\text{m s}^{-1}v=12+(−3.0)(5.0)=−3.0m s−1. The displacement is s=ut+12at2=(12)(5.0)+12(−3.0)(5.0)2=22.5 ms=ut+\frac{1}{2}at^2=(12)(5.0)+\frac{1}{2}(-3.0)(5.0)^2=22.5\,\text{m}s=ut+21​at2=(12)(5.0)+21​(−3.0)(5.0)2=22.5m. The tempting positive final velocity treats the negative acceleration as if it increased the cart’s velocity.

Keep going

Next topicA.2 Forces and momentum

More in Theme A · Space, time and motion

  1. A.1KinematicsNotes · 10 questions
  2. A.2Forces and momentumNotes · 10 questions
  3. A.3Work, energy and powerNotes · 10 questions
  4. A.4Rigid body mechanicsNotes · 9 questions· HL only
  5. A.5Galilean and special relativityNotes · 10 questions· HL only

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Direction distinguishes vector quantities from scalar quantities
  2. 2Velocity describes changing position and acceleration describes changing velocity
  3. 3Motion graphs show rates through gradients and changes through areas
  4. 4Average values describe intervals while instantaneous values describe moments
  5. 5Constant acceleration links displacement, time and velocity
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe