Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›IB Physics
  3. ›A Space, time and motion
  4. ›A.5 Galilean and special relativity

IB Physics · Theme A · Space, time and motion

A.5 Galilean and special relativity

Explain Galilean and special relativity, interpret relativistic measurements, and apply Lorentz transformations.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • HL only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Galilean relativity works when speeds are much lower than light speed
  1. 1Galilean relativity works when speeds are much lower than light speed
  2. 2Every inertial observer measures the same light speed
  3. 3Moving clocks and objects give different frame measurements
  4. 4Observers can disagree about whether separated events are simultaneous
  5. 5Lorentz transformations connect positions and times across frames
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Galilean relativity works when speeds are much lower than light speed

An inertial frame is a reference frame moving at constant velocity. The principle of Galilean relativity says that mechanical experiments obey the same laws in every inertial frame. No mechanical experiment inside a smoothly moving vehicle reveals its constant velocity. For frames moving at relative speed vvv along the xxx-axis, Galilean transformations give x′=x−vtx'=x-vtx′=x−vt and t′=tt'=tt′=t. Differentiating position gives u′=u−vu'=u-vu′=u−v: velocities add or subtract depending on the frame.

These transformations work well when speeds are much lower than light speed. They cannot preserve the same measured light speed in all inertial frames. Special relativity replaces their assumption that all frames share one time.

Key terms · tap one for its definition

inertial frame

A reference frame moving at constant velocity, in which an object with no resultant force has constant velocity.

principle of Galilean relativity

The laws of mechanics have the same form in every inertial frame.

Part 1 done

2

Part 2 of 5: Every inertial observer measures the same light speed

In a vacuum, the speed of light is c=3.00×108 m s−1c=3.00\times10^8\,\mathrm{m\,s^{-1}}c=3.00×108ms−1 for every inertial observer. It does not depend on the motion of the source or observer. Special relativity also keeps the laws of physics the same in all inertial frames. Together, these principles rule out the Galilean rule for adding light speeds.

Instead, observers moving relative to each other disagree about some distances and time intervals. Their measurements remain connected by consistent transformations. The Lorentz factor is γ=11−v2/c2\gamma=\frac{1}{\sqrt{1-v^2/c^2}}γ=1−v2/c2​1​, where vvv is the relative speed. It is at least one and grows as vvv approaches ccc.

Common mistake

A moving observer does not measure vacuum light travelling at c−vc-vc−v. Both inertial observers measure its speed as ccc.

Key terms · tap one for its definition

speed of light

The speed of light in a vacuum is the same for all inertial observers, regardless of source motion.

Lorentz factor

The factor γ=1/1−v2/c2\gamma=1/\sqrt{1-v^2/c^2}γ=1/1−v2/c2​ relates measurements made in inertial frames moving at relative speed vvv.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the situation that best illustrates the principle of Galilean relativity.
Show answer and explanation

Answer: D · Worked explanation

The principle states that the laws of mechanics have the same form in every inertial frame, so the ball’s motion relative to the train is unchanged. A constant-velocity vehicle does not reveal its own velocity through mechanical experiments conducted entirely inside it; acceleration, rather than steady motion, can make a difference.
3

Part 3 of 5: Moving clocks and objects give different frame measurements

Proper time Δτ\Delta\tauΔτ is measured by one clock present at both events. Another inertial frame measures the longer interval Δt=γΔτ\Delta t=\gamma\Delta\tauΔt=γΔτ. This is time dilation. The events must occur at the same place in the clock’s frame.

Proper length L0L_0L0​ is an object’s length in its rest frame. In a frame where it moves along its length, L=L0/γL=L_0/\gammaL=L0​/γ. This is length contraction. The moving frame must measure both endpoints at the same time in that frame. Only the dimension parallel to the relative motion contracts.

For v=0.60cv=0.60cv=0.60c, γ=1.25\gamma=1.25γ=1.25. A 2.0 microsecond proper interval becomes 2.5 microseconds. A 10 m proper length becomes 8.0 m.

Exam tip

Identify the clock or object at rest before choosing a proper value. For length, state which frame measures the endpoints simultaneously.

Key terms · tap one for its definition

proper time

The time interval between two events measured by a clock present at both events.

proper length

The length of an object measured in the frame where the object is at rest.

Part 3 done

4

Part 4 of 5: Observers can disagree about whether separated events are simultaneous

Simultaneity depends on the observer’s inertial frame when events occur at different positions. Consider two flashes at opposite ends of a stationary platform. They occur together in the platform frame. A train moves towards the right-hand flash. In the train frame, the right-hand flash occurs earlier than the left-hand flash.

Receiving the right-hand light first does not alone establish the event order. The observer must account for light’s travel time using clocks synchronised in their own frame. The disagreement follows from keeping light speed equal to ccc in both frames. Events at the same position cannot switch their time order between inertial frames.

Figure 1. The flashes share a time in the platform frame, but not in the train frame. Event order must be determined using synchronised clocks, not arrival times alone.

Key term

simultaneity

Simultaneity means that two events occur at the same time in a specified reference frame.

Part 4 done

Quick check

One question on the part you just read

Easy

State the speed measured for a pulse of light travelling through a vacuum by an inertial observer moving towards its source.
Show answer and explanation

Answer: B · Worked explanation

Every inertial observer measures vacuum light to travel at ccc, regardless of the motion of the source or observer. The tempting idea that an observer moving towards the source measures a larger speed applies ordinary Galilean velocity addition, which does not describe light consistently in special relativity.
5

Part 5 of 5: Lorentz transformations connect positions and times across frames

Let frame S′S'S′ move at speed vvv in the positive xxx-direction relative to SSS. Set both origins together at t=t′=0t=t'=0t=t′=0. An event has coordinates (x,t)(x,t)(x,t) in SSS and (x′,t′)(x',t')(x′,t′) in S′S'S′. The Lorentz transformations are x′=γ(x−vt)x'=\gamma(x-vt)x′=γ(x−vt) and t′=γ(t−vx/c2)t'=\gamma(t-vx/c^2)t′=γ(t−vx/c2). Perpendicular coordinates do not change. Unlike Galilean transformations, the transformed time depends on position.

Worked example

Transform one event

Frame S′S'S′ moves at 0.60c0.60c0.60c relative to SSS. An event occurs at x=300 mx=300\,\mathrm{m}x=300m and t=2.00 μst=2.00\,\mathrm{\mu s}t=2.00μs. Find its coordinates in S′S'S′. Use c=3.00×108 m s−1c=3.00\times10^8\,\mathrm{m\,s^{-1}}c=3.00×108ms−1.
  1. 1
    γ=1/1−0.602=1.25\gamma=1/\sqrt{1-0.60^2}=1.25γ=1/1−0.602​=1.25.
  2. 2
    vt=(0.60)(3.00×108)(2.00×10−6)=360 mvt=(0.60)(3.00\times10^8)(2.00\times10^{-6})=360\,\mathrm{m}vt=(0.60)(3.00×108)(2.00×10−6)=360m.
  3. 3
    x′=1.25(300−360)=−75 mx'=1.25(300-360)=-75\,\mathrm{m}x′=1.25(300−360)=−75m.
  4. 4
    vx/c2=0.60(300)/(3.00×108)=0.600 μsvx/c^2=0.60(300)/(3.00\times10^8)=0.600\,\mathrm{\mu s}vx/c2=0.60(300)/(3.00×108)=0.600μs; t′=1.25(2.00−0.600)=1.75 μst'=1.25(2.00-0.600)=1.75\,\mathrm{\mu s}t′=1.25(2.00−0.600)=1.75μs.

Answer: The event has coordinates x′=−75 mx'=-75\,\mathrm{m}x′=−75m and t′=1.75 μst'=1.75\,\mathrm{\mu s}t′=1.75μs.

Exam tip

State which frame moves in the positive direction. This fixes the signs in both transformations.

Key terms · tap one for its definition

event

An event is a single occurrence specified by its position and time in a reference frame.

Lorentz transformations

Equations relating the position and time coordinates of an event in two inertial frames.

Note read

Check your recall[16 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Explain[3 marks]

    Explain why Galilean transformations cannot describe light consistently in every inertial frame.

    Show mark schemeHide mark scheme

    Model answer

    Galilean transformations use a shared time and give u′=u−vu'=u-vu′=u−v. They therefore predict different light speeds for observers moving relative to each other. In a vacuum, all inertial observers instead measure light at speed ccc.

    • 1 mark for stating that Galilean transformations use the same time in both frames
    • 1 mark for stating that Galilean velocity addition predicts different measured light speeds
    • 1 mark for stating that vacuum light speed is invariant between inertial frames
  2. 2.Calculate[3 marks]

    Calculate the time interval measured in a frame where a clock moves at 0.60c0.60c0.60c, if its proper interval is 4.0 microseconds.

    Show mark schemeHide mark scheme

    Model answer

    γ=1/1−0.602=1.25\gamma=1/\sqrt{1-0.60^2}=1.25γ=1/1−0.602​=1.25. Thus Δt=γΔτ=1.25(4.0)=5.0 μs\Delta t=\gamma\Delta\tau=1.25(4.0)=5.0\,\mathrm{\mu s}Δt=γΔτ=1.25(4.0)=5.0μs.

    • 1 mark for calculating the Lorentz factor as 1.25
    • 1 mark for using Δt=γΔτ\Delta t=\gamma\Delta\tauΔt=γΔτ
    • 1 mark for obtaining 5.0 microseconds
  3. 3.Explain[3 marks]

    Explain how a moving observer measures the contracted length of an object.

    Show mark schemeHide mark scheme

    Model answer

    The proper length L0L_0L0​ is measured in the object’s rest frame. The moving observer measures both endpoints simultaneously in their own frame. The length parallel to motion is L=L0/γL=L_0/\gammaL=L0​/γ, so it is shorter.

    • 1 mark for identifying proper length as the length in the object’s rest frame
    • 1 mark for requiring simultaneous endpoint measurements in the moving observer’s frame
    • 1 mark for using L=L0/γL=L_0/\gammaL=L0​/γ for the length parallel to motion
  4. 4.Explain[3 marks]

    Explain why two separated flashes can be simultaneous in one frame but not another.

    Show mark schemeHide mark scheme

    Model answer

    Observers in relative motion assign different time coordinates to events at different positions. Their clocks are synchronised within their own frames, and both measure light at speed ccc. Consequently, flashes simultaneous in one frame can occur at different times in another.

    • 1 mark for stating that the events occur at different positions
    • 1 mark for stating that time coordinates depend on position when frames move relative to each other
    • 1 mark for linking the different time assignments to synchronised frame clocks and invariant light speed
  5. 5.Calculate[4 marks]

    Calculate the coordinates in S′S'S′ of an event at x=0x=0x=0 and t=2.00 μst=2.00\,\mathrm{\mu s}t=2.00μs in SSS, when S′S'S′ moves at 0.60c0.60c0.60c in the positive xxx-direction. Use c=3.00×108 m s−1c=3.00\times10^8\,\mathrm{m\,s^{-1}}c=3.00×108ms−1.

    Show mark schemeHide mark scheme

    Model answer

    γ=1.25\gamma=1.25γ=1.25 and vt=(0.60)(3.00×108)(2.00×10−6)=360 mvt=(0.60)(3.00\times10^8)(2.00\times10^{-6})=360\,\mathrm{m}vt=(0.60)(3.00×108)(2.00×10−6)=360m. Therefore x′=γ(x−vt)=1.25(0−360)=−450 mx'=\gamma(x-vt)=1.25(0-360)=-450\,\mathrm{m}x′=γ(x−vt)=1.25(0−360)=−450m. Also, t′=γ(t−vx/c2)=1.25(2.00)=2.50 μst'=\gamma(t-vx/c^2)=1.25(2.00)=2.50\,\mathrm{\mu s}t′=γ(t−vx/c2)=1.25(2.00)=2.50μs.

    • 1 mark for calculating γ=1.25\gamma=1.25γ=1.25
    • 1 mark for calculating vt=360 mvt=360\,\mathrm{m}vt=360m
    • 1 mark for obtaining x′=−450 mx'=-450\,\mathrm{m}x′=−450m
    • 1 mark for obtaining t′=2.50 μst'=2.50\,\mathrm{\mu s}t′=2.50μs

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

Identify the condition that makes a measured time interval a proper time interval.
Show answer and explanation

Answer: D · Worked explanation

Proper time, denoted Δτ\Delta\tauΔτ, is the interval recorded by one clock present at both events. The events therefore occur at the same place in that clock’s frame. Simultaneity in every frame is not required, and a clock does not need to move at light speed.
4.

Easy·Identify[1 mark]

Identify the statement that describes simultaneity in special relativity.
Show answer and explanation

Answer: B · Worked explanation

For events at different positions, observers in relative motion can assign different time coordinates and disagree about whether the events are simultaneous. Events at the same position cannot switch their time order between inertial frames, so the last option describes a misconception.
5.

Medium·Determine[2 marks]

A probe moves at 900 m s−1900\,\mathrm{m\,s^{-1}}900ms−1 relative to a laboratory, and releases a small object forwards at 20 m s−120\,\mathrm{m\,s^{-1}}20ms−1 relative to the probe. Using Galilean velocity addition, determine the object’s speed relative to the laboratory and why this approach is suitable here.
Show answer and explanation

Answer: C · Worked explanation

For speeds much smaller than light speed, Galilean addition gives u=u′+v=20+900=920 m s−1u=u'+v=20+900=920\,\mathrm{m\,s^{-1}}u=u′+v=20+900=920ms−1. The approximation is suitable because these speeds are tiny compared with ccc. Subtracting the release speed would correspond to a different direction of release, not the stated forward direction.
6.

Medium·Calculate[2 marks]

A clock records a proper time interval of 3.0 μs3.0\,\mathrm{\mu s}3.0μs. The clock moves at 0.80c0.80c0.80c relative to a laboratory. Calculate the interval measured in the laboratory.
Show answer and explanation

Answer: C · Worked explanation

The Lorentz factor is γ=1/1−0.802=5/3\gamma=1/\sqrt{1-0.80^2}=5/3γ=1/1−0.802​=5/3. Thus the laboratory interval is Δt=γΔτ=(5/3)(3.0 μs)=5.0 μs\Delta t=\gamma\Delta\tau=(5/3)(3.0\,\mathrm{\mu s})=5.0\,\mathrm{\mu s}Δt=γΔτ=(5/3)(3.0μs)=5.0μs. The tempting unchanged value of 3.0 μs3.0\,\mathrm{\mu s}3.0μs is the proper interval, not the dilated interval measured in the laboratory.
7.

Medium·Calculate[2 marks]

A rod has a proper length of 15 m15\,\mathrm{m}15m. It moves parallel to its length at a speed for which γ=1.25\gamma=1.25γ=1.25. Calculate its length in the frame in which it is moving.
Show answer and explanation

Answer: D · Worked explanation

The moving-frame length is L=L0/γ=15/1.25=12 mL=L_0/\gamma=15/1.25=12\,\mathrm{m}L=L0​/γ=15/1.25=12m. The rod contracts only along the direction of motion, and the moving frame must measure both endpoints simultaneously. Multiplying by γ\gammaγ would incorrectly make the moving rod longer.
8.

Medium·Calculate[2 marks]

Frame S′S'S′ moves at 0.60c0.60c0.60c in the positive xxx-direction relative to SSS. An event has coordinates x=0x=0x=0 and t=1.00 μst=1.00\,\mathrm{\mu s}t=1.00μs in SSS. Calculate its position x′x'x′ in S′S'S′.
Show answer and explanation

Answer: D · Worked explanation

Here γ=1.25\gamma=1.25γ=1.25 and vt=(0.60)(3.00×108)(1.00×10−6)=180 mvt=(0.60)(3.00\times10^8)(1.00\times10^{-6})=180\,\mathrm{m}vt=(0.60)(3.00×108)(1.00×10−6)=180m. The transformation gives x′=γ(x−vt)=1.25(0−180)=−225 mx'=\gamma(x-vt)=1.25(0-180)=-225\,\mathrm{m}x′=γ(x−vt)=1.25(0−180)=−225m. The negative sign follows from the stated direction of motion of S′S'S′.
9.

Hard·Deduce[2 marks]

Two flashes occur simultaneously in frame SSS at positions x=0x=0x=0 and x=600 mx=600\,\mathrm{m}x=600m. Frame S′S'S′ moves at 0.50c0.50c0.50c in the positive xxx-direction relative to SSS. Deduce the time difference between the flashes in S′S'S′, and which flash occurs earlier there.
Show answer and explanation

Answer: A · Worked explanation

For each event, t′=γ(t−vx/c2)t'=\gamma(t-vx/c^2)t′=γ(t−vx/c2), and the events have t=0t=0t=0. The time difference for the event at 600 m600\,\mathrm{m}600m relative to the one at 0 is −γv(600)/c2≈−1.15 μs-\gamma v(600)/c^2\approx-1.15\,\mathrm{\mu s}−γv(600)/c2≈−1.15μs, so the right-hand flash is earlier in S′S'S′. The events’ simultaneity in SSS does not make them simultaneous in every frame.
10.

Hard·Calculate[2 marks]

Frame S′S'S′ moves at 0.60c0.60c0.60c in the positive xxx-direction relative to SSS. An event occurs at x=600 mx=600\,\mathrm{m}x=600m and t=3.00 μst=3.00\,\mathrm{\mu s}t=3.00μs in SSS. Calculate its coordinates in S′S'S′, using c=3.00×108 m s−1c=3.00\times10^8\,\mathrm{m\,s^{-1}}c=3.00×108ms−1.
Show answer and explanation

Answer: B · Worked explanation

With γ=1.25\gamma=1.25γ=1.25, vt=540 mvt=540\,\mathrm{m}vt=540m, so x′=1.25(600−540)=75 mx'=1.25(600-540)=75\,\mathrm{m}x′=1.25(600−540)=75m. Also, vx/c2=1.20 μsvx/c^2=1.20\,\mathrm{\mu s}vx/c2=1.20μs, giving t′=1.25(3.00−1.20)=2.25 μst'=1.25(3.00-1.20)=2.25\,\mathrm{\mu s}t′=1.25(3.00−1.20)=2.25μs.

Keep going

Next topicB.1 Thermal energy transfersPrevious topicA.4 Rigid body mechanics

More in Theme A · Space, time and motion

  1. A.1KinematicsNotes · 10 questions
  2. A.2Forces and momentumNotes · 10 questions
  3. A.3Work, energy and powerNotes · 10 questions
  4. A.4Rigid body mechanicsNotes · 9 questions· HL only
  5. A.5Galilean and special relativityNotes · 10 questions· HL only

All IB Physics topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by IB Diploma Programme or any exam board.

On this page

0/5 read

  1. 1Galilean relativity works when speeds are much lower than light speed
  2. 2Every inertial observer measures the same light speed
  3. 3Moving clocks and objects give different frame measurements
  4. 4Observers can disagree about whether separated events are simultaneous
  5. 5Lorentz transformations connect positions and times across frames
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe