Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›8 Applications of Integration
  4. ›8.2 Position, velocity and acceleration with integrals

AP Calculus AB · Unit 8 · Applications of Integration

8.2 Position, velocity and acceleration with integrals

Interpret motion graphs, calculate displacement and distance, and find position by integrating velocity or acceleration.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Motion graphs connect position, velocity, and acceleration
  1. 1Motion graphs connect position, velocity, and acceleration
  2. 2Integrating velocity gives displacement, not always distance
  3. 3Initial conditions fix the position found by integration
  4. 4Split motion at direction changes before finding distance
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Motion graphs connect position, velocity, and acceleration

Position gives an object's location relative to an origin. Velocity is the rate of change of position, including direction. Acceleration is the rate of change of velocity. On a position graph, slope gives velocity. On a velocity graph, slope gives acceleration. Positive velocity means position is increasing, while negative velocity means position is decreasing.

Areas under graphs describe changes rather than slopes. The signed area under a velocity graph gives the change in position. The signed area under an acceleration graph gives the change in velocity. For a curved graph, a definite integral calculates that signed area exactly.

Key terms · tap one for its definition

Position

Position is an object's location relative to a chosen origin at a given time.

Velocity

Velocity is the rate of change of position with respect to time.

Acceleration

Acceleration is the rate of change of velocity with respect to time.

Part 1 done

2

Part 2 of 4: Integrating velocity gives displacement, not always distance

Displacement is the change in position from time aaa to time bbb: x(b)−x(a)=∫abv(t) dtx(b)-x(a)=\int_a^b v(t)\,dtx(b)−x(a)=∫ab​v(t)dt. Area above the time axis counts positively. Area below it counts negatively. These contributions can cancel when an object reverses direction.

Total distance traveled counts motion in either direction. Calculate it with ∫ab∣v(t)∣ dt\int_a^b |v(t)|\,dt∫ab​∣v(t)∣dt. Find every time velocity changes sign, then split the integral there. On each interval, use the sign of velocity to make its contribution positive.

Common mistake

Do not take the absolute value of the final displacement to find total distance. Add the absolute values of the separate signed contributions.

Key terms · tap one for its definition

Displacement

Displacement is final position minus initial position, with direction represented by its sign.

Total distance traveled

Total distance traveled is the sum of lengths moved in every direction.

Part 2 done

Quick check

One question on the part you just read

Easy

A velocity-versus-time graph has a signed area of -7 meters over the interval from t=1t=1t=1 to t=5t=5t=5 seconds. Determine the object's change in position over this interval.
Show answer and explanation

Answer: D · Worked explanation

The signed area under a velocity graph gives the change in position, so the object's displacement is -7 meters. The negative sign indicates that its final position is 7 meters lower than its initial position. The tempting answer 7 meters per second has velocity units, but an area of velocity over time has units of distance.
3

Part 3 of 4: Initial conditions fix the position found by integration

Integrating velocity gives a position function, but it also introduces a constant. If the position at time t0t_0t0​ is known, use x(t)=x(t0)+∫t0tv(u) dux(t)=x(t_0)+\int_{t_0}^{t}v(u)\,dux(t)=x(t0​)+∫t0​t​v(u)du. The initial position fixes the constant and locates the object relative to the origin.

If acceleration is given instead, integrate it to find velocity first. The initial velocity fixes the constant in that step: v(t)=v(t0)+∫t0ta(u) duv(t)=v(t_0)+\int_{t_0}^{t}a(u)\,duv(t)=v(t0​)+∫t0​t​a(u)du. Then integrate velocity and use the initial position. Acceleration and position data alone do not determine a unique position function.

Exam tip

When integrating acceleration twice, show both constants. State which initial condition determines each one.

Key terms · tap one for its definition

Position function

A position function gives an object's location at each time in its domain.

Initial velocity

Initial velocity is the velocity at the chosen starting time.

Part 3 done

4

Part 4 of 4: Split motion at direction changes before finding distance

A zero of velocity is a possible turning time. Check the sign of velocity on both sides. Only a sign change shows that the object reverses direction. Split a distance calculation at each reversal within the time interval.

Worked example

Displacement and distance from velocity

An object has velocity v(t)=t−2v(t)=t-2v(t)=t−2 meters per second for 0≤t≤40\leq t\leq40≤t≤4 seconds. Find its displacement and total distance.
  1. 1
    Solve t−2=0t-2=0t−2=0. Velocity changes from negative to positive at t=2t=2t=2 seconds.
  2. 2
    Find displacement: ∫04(t−2) dt=[t22−2t]04=0\int_0^4(t-2)\,dt=\left[\frac{t^2}{2}-2t\right]_0^4=0∫04​(t−2)dt=[2t2​−2t]04​=0 meters.
  3. 3
    Find distance before reversal: ∣∫02(t−2) dt∣=2\left|\int_0^2(t-2)\,dt\right|=2​∫02​(t−2)dt​=2 meters.
  4. 4
    Find distance after reversal: ∣∫24(t−2) dt∣=2\left|\int_2^4(t-2)\,dt\right|=2​∫24​(t−2)dt​=2 meters.

Answer: Displacement is 0 meters. Total distance is 2+2=42+2=42+2=4 meters.

The object ends where it started, despite traveling 4 meters. Its negative and positive displacements cancel, but both contribute to distance.

Key term

Turning time

A turning time is a time when velocity changes sign and the object reverses direction.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify what the slope of a velocity graph represents.

    Show mark schemeHide mark scheme

    Model answer

    The slope represents acceleration.

    • 1 mark for identifying acceleration
  2. 2.Explain[2 marks]

    Explain why displacement can be zero when total distance is positive.

    Show mark schemeHide mark scheme

    Model answer

    Displacements in opposite directions have opposite signs and can cancel. Distance counts motion in both directions positively.

    • 1 mark for explaining that opposite signed displacements can cancel
    • 1 mark for explaining that distance counts motion in either direction positively
  3. 3.Calculate[4 marks]

    Calculate displacement and total distance when v(t)=t−1v(t)=t-1v(t)=t−1 meters per second for 0≤t≤30\leq t\leq30≤t≤3 seconds.

    Show mark schemeHide mark scheme

    Model answer

    Velocity changes sign at t=1t=1t=1. Displacement is ∫03(t−1) dt=32\int_0^3(t-1)\,dt=\frac{3}{2}∫03​(t−1)dt=23​ meters. The contributions are −12-\frac{1}{2}−21​ meter and 2 meters, so total distance is 52\frac{5}{2}25​ meters.

    • 1 mark for finding the sign change at t=1t=1t=1
    • 1 mark for evaluating the signed integral as 32\frac{3}{2}23​ meters
    • 1 mark for splitting the distance calculation at t=1t=1t=1
    • 1 mark for finding total distance of 52\frac{5}{2}25​ meters
  4. 4.Determine[2 marks]

    Determine x(t)x(t)x(t) if v(t)=2tv(t)=2tv(t)=2t meters per second and x(0)=3x(0)=3x(0)=3 meters.

    Show mark schemeHide mark scheme

    Model answer

    Integrating gives x(t)=t2+Cx(t)=t^2+Cx(t)=t2+C. Since x(0)=3x(0)=3x(0)=3, the position is x(t)=t2+3x(t)=t^2+3x(t)=t2+3 meters.

    • 1 mark for integrating velocity to obtain t2+Ct^2+Ct2+C
    • 1 mark for using the initial position to obtain x(t)=t2+3x(t)=t^2+3x(t)=t2+3 meters
  5. 5.Determine[4 marks]

    Determine x(t)x(t)x(t) if a(t)=2ta(t)=2ta(t)=2t meters per second squared, v(0)=1v(0)=1v(0)=1 meter per second, and x(0)=3x(0)=3x(0)=3 meters.

    Show mark schemeHide mark scheme

    Model answer

    Integrating acceleration gives v(t)=t2+Cv(t)=t^2+Cv(t)=t2+C, so v(t)=t2+1v(t)=t^2+1v(t)=t2+1 meters per second. Integrating again gives x(t)=t33+t+Dx(t)=\frac{t^3}{3}+t+Dx(t)=3t3​+t+D. Since x(0)=3x(0)=3x(0)=3, x(t)=t33+t+3x(t)=\frac{t^3}{3}+t+3x(t)=3t3​+t+3 meters.

    • 1 mark for integrating acceleration to obtain v(t)=t2+Cv(t)=t^2+Cv(t)=t2+C
    • 1 mark for using initial velocity to obtain v(t)=t2+1v(t)=t^2+1v(t)=t2+1
    • 1 mark for integrating velocity to obtain x(t)=t33+t+Dx(t)=\frac{t^3}{3}+t+Dx(t)=3t3​+t+D
    • 1 mark for using initial position to obtain x(t)=t33+t+3x(t)=\frac{t^3}{3}+t+3x(t)=3t3​+t+3 meters

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Calculate[1 mark]

A particle moves with constant velocity v(t)=3v(t)=3v(t)=3 meters per second from t=0t=0t=0 to t=4t=4t=4 seconds. Calculate its displacement over this interval.
Show answer and explanation

Answer: B · Worked explanation

Displacement is the integral of velocity: ∫043 dt=3(4−0)=12\int_0^4 3\,dt=3(4-0)=12∫04​3dt=3(4−0)=12 meters. The value 7 comes from adding the velocity value to the elapsed time rather than integrating. The result has units of meters because meters per second multiplied by seconds gives meters.
3.

Easy·Determine[1 mark]

A particle has velocity v(t)=4tv(t)=4tv(t)=4t meters per second and position x(0)=−2x(0)=-2x(0)=−2 meters. Determine its position function.
Show answer and explanation

Answer: A · Worked explanation

Integrating velocity gives x(t)=2t2+Cx(t)=2t^2+Cx(t)=2t2+C, and the condition x(0)=−2x(0)=-2x(0)=−2 sets C=−2C=-2C=−2. Thus x(t)=2t2−2x(t)=2t^2-2x(t)=2t2−2 meters. The tempting expression 4t2−24t^2-24t2−2 results from forgetting the factor of one-half when integrating 4t4t4t.
4.

Easy·Identify[1 mark]

An acceleration-versus-time graph has a signed area of 5 meters per second over a time interval. Identify what this area represents.
Show answer and explanation

Answer: B · Worked explanation

The signed area under an acceleration graph is the integral of acceleration, which equals the change in velocity. Its units are meters per second, matching the stated area. The change in position instead comes from the signed area under a velocity graph, so that is the tempting but incorrect interpretation.
5.

Medium·Calculate[2 marks]

A particle's velocity is v(t)=t2−1v(t)=t^2-1v(t)=t2−1 meters per second for 0≤t≤20\leq t\leq20≤t≤2 seconds. Calculate its displacement over this interval.
Show answer and explanation

Answer: D · Worked explanation

Displacement is the signed integral: ∫02(t2−1) dt=[t3/3−t]02=2/3\int_0^2(t^2-1)\,dt=[t^3/3-t]_0^2=2/3∫02​(t2−1)dt=[t3/3−t]02​=2/3 meters. Velocity is negative before t=1t=1t=1, so that portion contributes negatively. The total distance, which instead adds the magnitudes of the two portions, is 2 meters.
6.

Medium·Determine[2 marks]

An object's velocity is v(t)=(t−1)(t−3)v(t)=(t-1)(t-3)v(t)=(t−1)(t−3) meters per second for 0≤t≤40\leq t\leq40≤t≤4 seconds. Determine its total distance traveled.
Show answer and explanation

Answer: B · Worked explanation

Velocity is positive on [0,1][0,1][0,1], negative on [1,3][1,3][1,3], and positive on [3,4][3,4][3,4], so split the distance calculation at t=1t=1t=1 and t=3t=3t=3. An antiderivative is F(t)=t3/3−2t2+3tF(t)=t^3/3-2t^2+3tF(t)=t3/3−2t2+3t. The signed contributions are 4/34/34/3, −4/3-4/3−4/3, and 4/34/34/3 meters; adding their absolute values gives 4 meters. The net displacement is only 4/34/34/3 meters.
7.

Medium·Determine[2 marks]

A particle has acceleration a(t)=6ta(t)=6ta(t)=6t meters per second squared, velocity v(1)=5v(1)=5v(1)=5 meters per second, and position x(1)=2x(1)=2x(1)=2 meters. Determine its position function.
Show answer and explanation

Answer: C · Worked explanation

Integrating acceleration gives v(t)=3t2+Cv(t)=3t^2+Cv(t)=3t2+C; v(1)=5v(1)=5v(1)=5 gives C=2C=2C=2. Integrating v(t)=3t2+2v(t)=3t^2+2v(t)=3t2+2 gives x(t)=t3+2t+Dx(t)=t^3+2t+Dx(t)=t3+2t+D; x(1)=2x(1)=2x(1)=2 gives D=−1D=-1D=−1. Thus x(t)=t3+2t−1x(t)=t^3+2t-1x(t)=t3+2t−1 meters.
8.

Medium·Deduce[2 marks]

A velocity graph has signed area 6 meters from t=0t=0t=0 to t=2t=2t=2 seconds and signed area -9 meters from t=2t=2t=2 to t=5t=5t=5 seconds. Deduce the net change in position from t=0t=0t=0 to t=5t=5t=5 seconds.
Show answer and explanation

Answer: D · Worked explanation

The net change in position is the sum of the signed areas: 6+(−9)=−36+(-9)=-36+(−9)=−3 meters. The negative result means the particle ends 3 meters below its starting position. Adding the magnitudes to get 15 meters would calculate distance only if the areas represent separate intervals of motion and are converted to positive contributions.
9.

Medium·Calculate[2 marks]

A particle has velocity v(t)=2t−1v(t)=2t-1v(t)=2t−1 meters per second and position x(2)=5x(2)=5x(2)=5 meters. Calculate its position at t=4t=4t=4 seconds.
Show answer and explanation

Answer: D · Worked explanation

The change in position is ∫24(2t−1) dt=[t2−t]24=(16−4)−(4−2)=10\int_2^4(2t-1)\,dt=[t^2-t]_2^4=(16-4)-(4-2)=10∫24​(2t−1)dt=[t2−t]24​=(16−4)−(4−2)=10 meters. Therefore x(4)=5+10=15x(4)=5+10=15x(4)=5+10=15 meters.
10.

Hard·Deduce[2 marks]

A particle starts at position x(0)=4x(0)=4x(0)=4 meters. Its velocity is negative from t=0t=0t=0 to t=2t=2t=2 seconds and positive from t=2t=2t=2 to t=5t=5t=5 seconds. The signed area under its velocity graph is -6 meters on the first interval and 6 meters on the second. Deduce the particle's position at t=5t=5t=5 and its total distance traveled.
Show answer and explanation

Answer: B · Worked explanation

The net displacement is −6+6=0-6+6=0−6+6=0 meters, so the final position remains 4 meters. Total distance adds the magnitudes of the two interval contributions: ∣−6∣+∣6∣=12|-6|+|6|=12∣−6∣+∣6∣=12 meters. The tempting distance of 0 meters confuses cancellation of signed displacement with distance, which counts motion in either direction positively.

Keep going

Next topic8.3 Accumulation in applied contextsPrevious topic8.1 Average value of a function

More in Unit 8 · Applications of Integration

  1. 8.1Average value of a functionNotes · 10 questions
  2. 8.2Position, velocity and acceleration with integralsNotes · 10 questions
  3. 8.3Accumulation in applied contextsNotes · 10 questions
  4. 8.4Area between curves (functions of x)Notes · 10 questions
  5. 8.5Area between curves (functions of y)Notes · 9 questions
  6. 8.6Area between curves with several intersectionsNotes · 10 questions
  7. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  8. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  9. 8.9Disc method about the x- or y-axisNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Motion graphs connect position, velocity, and acceleration
  2. 2Integrating velocity gives displacement, not always distance
  3. 3Initial conditions fix the position found by integration
  4. 4Split motion at direction changes before finding distance
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe