Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus AB
  3. ›8 Applications of Integration
  4. ›8.3 Accumulation in applied contexts

AP Calculus AB · Unit 8 · Applications of Integration

8.3 Accumulation in applied contexts

Set up and evaluate integrals for accumulation, and interpret their meaning in applied contexts.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A rate accumulates into a total change
  1. 1A rate accumulates into a total change
  2. 2An initial amount turns net change into an amount
  3. 3Multiple rates combine before their changes accumulate
  4. 4Evaluating a rate integral gives an applied result
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A rate accumulates into a total change

An accumulation rate describes how quickly a quantity changes. Its units are quantity units per time unit. For example, water flowing into a tank at liters per minute adds water over time. A definite integral combines the small changes across a time interval. If r(t)r(t)r(t) is the rate, the net change from time aaa to time bbb is ∫abr(t) dt\int_a^b r(t)\,dt∫ab​r(t)dt. The result has units of the accumulated quantity, not units per time.

The limits must match the time period in the question. Include the units when interpreting the result. If the rate is negative, it reduces the net change.

Key terms · tap one for its definition

accumulation rate

An accumulation rate measures how quickly an amount changes with respect to time.

net change

Net change is the final amount minus the initial amount, including increases and decreases.

Part 1 done

2

Part 2 of 4: An initial amount turns net change into an amount

An integral of a rate gives a change, not automatically a final amount. If Q(a)Q(a)Q(a) is the initial amount and Q′(t)=r(t)Q'(t)=r(t)Q′(t)=r(t), then Q(b)=Q(a)+∫abr(t) dtQ(b)=Q(a)+\int_a^b r(t)\,dtQ(b)=Q(a)+∫ab​r(t)dt. This relationship models quantities such as stored water, a growing population, or accumulated production. Choose a signed rate that matches the quantity being tracked. An inflow is positive for water in a tank. An outflow is negative.

Common mistake

Do not call ∫abr(t) dt\int_a^b r(t)\,dt∫ab​r(t)dt the final amount unless the initial amount is zero. Add the initial amount when the question asks how much is present at time bbb.

Key terms · tap one for its definition

initial amount

The initial amount is the quantity present at the start of the time interval.

signed rate

A signed rate uses positive values for increases and negative values for decreases.

Part 2 done

Quick check

One question on the part you just read

Easy

A signed rate of change for the amount of salt in a tank is measured in pounds per minute. What does its definite integral from minute 2 to minute 7 represent?
Show answer and explanation

Answer: B · Worked explanation

A definite integral of a signed rate over a time interval gives the quantity's net change on that interval. The units are pounds because multiplying pounds per minute by minutes cancels the time unit. The amount present at minute 7 would also depend on how much salt was in the tank at minute 2.
3

Part 3 of 4: Multiple rates combine before their changes accumulate

Some situations have separate sources of increase and decrease. If I(t)I(t)I(t) is an input rate and O(t)O(t)O(t) is an output rate, the net rate is I(t)−O(t)I(t)-O(t)I(t)−O(t). Integrate this difference to find the change over the interval. For a tank, ∫ab[I(t)−O(t)] dt\int_a^b [I(t)-O(t)]\,dt∫ab​[I(t)−O(t)]dt gives the net change in water volume. Both rates must use compatible units and the same time variable.

If the question asks for total input, integrate I(t)I(t)I(t) alone. Output does not cancel input when counting everything that entered. State which quantity the integral represents before evaluating it.

Exam tip

Name the quantity, its rate, and the time interval. This makes the sign and limits of the integral easier to check.

Key terms · tap one for its definition

net rate

The net rate is the rate of increase minus the rate of decrease.

total input

Total input counts all quantity entering during an interval, without subtracting output.

Part 3 done

4

Part 4 of 4: Evaluating a rate integral gives an applied result

A formula for the rate lets you calculate accumulation with an antiderivative. Write the integral with its time limits first. Then evaluate the antiderivative at the upper limit and subtract its value at the lower limit. Finally, interpret the result in context. A positive integral value means a net increase when the integrand is a signed change rate.

Worked example

Water entering a tank

A tank starts with 30 liters. Water enters at r(t)=4+2tr(t)=4+2tr(t)=4+2t liters per minute, where ttt is minutes. Find the water added during the first 3 minutes and the amount then in the tank.
  1. 1
    Set up the added water: ∫03(4+2t) dt\int_0^3(4+2t)\,dt∫03​(4+2t)dt liters.
  2. 2
    Find an antiderivative: ∫(4+2t) dt=4t+t2+C\int(4+2t)\,dt=4t+t^2+C∫(4+2t)dt=4t+t2+C.
  3. 3
    Evaluate: [4t+t2]03=(12+9)−0=21[4t+t^2]_0^3=(12+9)-0=21[4t+t2]03​=(12+9)−0=21 liters.
  4. 4
    Add the initial amount: 30+21=5130+21=5130+21=51 liters.

Answer: The tank gains 21 liters and contains 51 liters after 3 minutes.

The rate changes with time, so multiplying an arbitrary rate value by 3 minutes need not give the correct result.

Key term

integral value

The integral value of a signed rate over an interval gives the quantity's net change.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[1 mark]

    State the units of the integral of a rate measured in liters per minute over time measured in minutes.

    Show mark schemeHide mark scheme

    Model answer

    The integral is measured in liters.

    • 1 mark for stating liters
  2. 2.Explain[2 marks]

    Explain why an integral of a signed rate may differ from the final amount.

    Show mark schemeHide mark scheme

    Model answer

    The integral gives net change over the interval. Add the initial amount to obtain the final amount.

    • 1 mark for identifying the integral as net change
    • 1 mark for stating that the initial amount must be added
  3. 3.Construct[3 marks]

    Construct an expression for the water in a tank at time bbb. It contains V0V_0V0​ liters at time aaa, with inflow I(t)I(t)I(t) and outflow O(t)O(t)O(t) in liters per minute.

    Show mark schemeHide mark scheme

    Model answer

    The net rate is I(t)−O(t)I(t)-O(t)I(t)−O(t). The tank contains V0+∫ab[I(t)−O(t)] dtV_0+\int_a^b[I(t)-O(t)]\,dtV0​+∫ab​[I(t)−O(t)]dt liters at time bbb.

    • 1 mark for subtracting the outflow rate from the inflow rate
    • 1 mark for integrating the net rate from aaa to bbb
    • 1 mark for adding the initial volume V0V_0V0​
  4. 4.Calculate[3 marks]

    Calculate the total growth from day 0 to day 4 when a quantity grows at g(t)=3t+2g(t)=3t+2g(t)=3t+2 units per day.

    Show mark schemeHide mark scheme

    Model answer

    The growth is ∫04(3t+2) dt=[32t2+2t]04=24+8=32\int_0^4(3t+2)\,dt=[\frac{3}{2}t^2+2t]_0^4=24+8=32∫04​(3t+2)dt=[23​t2+2t]04​=24+8=32 units.

    • 1 mark for setting up ∫04(3t+2) dt\int_0^4(3t+2)\,dt∫04​(3t+2)dt
    • 1 mark for finding the antiderivative 32t2+2t\frac{3}{2}t^2+2t23​t2+2t
    • 1 mark for evaluating the integral as 32 units
  5. 5.Compare[3 marks]

    Compare the net change and total input for a system with input I(t)I(t)I(t) and output O(t)O(t)O(t) from time aaa to bbb.

    Show mark schemeHide mark scheme

    Model answer

    Net change is ∫ab[I(t)−O(t)] dt\int_a^b[I(t)-O(t)]\,dt∫ab​[I(t)−O(t)]dt, which accounts for both input and output. Total input is ∫abI(t) dt\int_a^b I(t)\,dt∫ab​I(t)dt, which counts only what entered.

    • 1 mark for giving ∫ab[I(t)−O(t)] dt\int_a^b[I(t)-O(t)]\,dt∫ab​[I(t)−O(t)]dt for net change
    • 1 mark for giving ∫abI(t) dt\int_a^b I(t)\,dt∫ab​I(t)dt for total input
    • 1 mark for explaining that output reduces net change but not total input

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

A bacterial culture's population increases at a rate of p(t)p(t)p(t) cells per hour. Which expression represents the number of cells added between hour 1 and hour 6?
Show answer and explanation

Answer: B · Worked explanation

The rate is measured in cells per hour, so integrating it with respect to time from hour 1 to hour 6 gives the cells added during precisely that interval. Integrating from hour 0 would include the first hour as well. Subtracting endpoint rate values does not measure accumulated population change.
3.

Easy·Determine[1 mark]

A storage container holds 18 gallons at the start of an interval. During the interval, the signed rate of change in its contents has integral value -5 gallons. How much does the container hold at the end?
Show answer and explanation

Answer: B · Worked explanation

The integral gives the net change, so the ending amount is the initial amount plus that change: 18+(−5)=1318+(-5)=1318+(−5)=13 gallons. Adding 5 gallons would treat the negative change as an increase. The integral value alone is not the ending amount because the container did not start empty.
4.

Easy·Identify[1 mark]

A factory records the rate at which products enter a shipping area and the rate at which products leave it. Which quantity is represented by integrating only the entry rate over a time interval?
Show answer and explanation

Answer: B · Worked explanation

Integrating the entry rate alone counts all products that entered during the interval. Net change requires subtracting the exit rate before integrating, and the ending count also requires the initial number of products. Integrating only the entry rate does not measure products leaving.
5.

Medium·Calculate[2 marks]

A greenhouse receives water at a rate of w(t)=2t+1w(t)=2t+1w(t)=2t+1 gallons per hour, where ttt is measured in hours. How many gallons enter the greenhouse's tank between hour 1 and hour 4?
Show answer and explanation

Answer: C · Worked explanation

The amount entering is ∫14(2t+1) dt=[t2+t]14=(16+4)−(1+1)=18\int_1^4(2t+1)\,dt=[t^2+t]_1^4=(16+4)-(1+1)=18∫14​(2t+1)dt=[t2+t]14​=(16+4)−(1+1)=18 gallons. The tempting value 20 gallons comes from integrating from hour 0 to hour 4, which includes water that entered before the requested interval.
6.

Medium·Determine[2 marks]

At time t=0t=0t=0, a wildlife preserve has 240 deer. The population's signed rate of change is r(t)=12−2tr(t)=12-2tr(t)=12−2t deer per month for 0≤t≤50\le t\le 50≤t≤5. How many deer does the model predict at month 5?
Show answer and explanation

Answer: C · Worked explanation

The net change is ∫05(12−2t) dt=[12t−t2]05=60−25=35\int_0^5(12-2t)\,dt=[12t-t^2]_0^5=60-25=35∫05​(12−2t)dt=[12t−t2]05​=60−25=35 deer. Adding this change to the initial population gives 240+35=275240+35=275240+35=275 deer. The value 35 is only the net increase, not the population present at month 5.
7.

Medium·Set up[2 marks]

A reservoir receives water at I(t)=7+tI(t)=7+tI(t)=7+t cubic meters per hour and releases water at O(t)=3O(t)=3O(t)=3 cubic meters per hour. Which integral gives the net change in reservoir volume over the first 4 hours?
Show answer and explanation

Answer: B · Worked explanation

The net rate of change is the input rate minus the output rate, so the net change is represented by ∫04[I(t)−O(t)] dt=∫04[(7+t)−3] dt\int_0^4[I(t)-O(t)]\,dt=\int_0^4[(7+t)-3] \,dt∫04​[I(t)−O(t)]dt=∫04​[(7+t)−3]dt. Integrating the input alone counts total input, not net change; reversing the subtraction would give the negative of the desired change.
8.

Medium·Interpret[2 marks]

For a machine, the signed rate of change in its stored energy is q(t)=6−2tq(t)=6-2tq(t)=6−2t kilowatt-hours per hour for 0≤t≤50\le t\le 50≤t≤5. What does the value of ∫05q(t) dt\int_0^5 q(t)\,dt∫05​q(t)dt indicate?
Show answer and explanation

Answer: D · Worked explanation

Evaluating gives ∫05(6−2t) dt=[6t−t2]05=30−25=5\int_0^5(6-2t)\,dt=[6t-t^2]_0^5=30-25=5∫05​(6−2t)dt=[6t−t2]05​=30−25=5 kilowatt-hours, a net increase in stored energy. It is not the final energy amount, which would require the initial energy too. The negative portion of the rate after t=3t=3t=3 reduces the net change.
9.

Hard·Deduce[2 marks]

A tank contains 50 liters at time t=0t=0t=0. For the first 3 minutes, its signed rate of change is r(t)=4−tr(t)=4-tr(t)=4−t liters per minute; for the next 2 minutes, the signed rate is r(t)=−2r(t)=-2r(t)=−2 liters per minute. How much water is in the tank at minute 5?
Show answer and explanation

Answer: D · Worked explanation

The net change is ∫03(4−t) dt+∫35(−2) dt=(12−4.5)−4=3.5\int_0^3(4-t)\,dt+\int_3^5(-2)\,dt=(12-4.5)-4=3.5∫03​(4−t)dt+∫35​(−2)dt=(12−4.5)−4=3.5 liters. Adding this to the initial 50 liters gives 53.5 liters.
10.

Hard·Determine[2 marks]

A device receives material at I(t)=5+tI(t)=5+tI(t)=5+t kilograms per hour and loses material at O(t)=2O(t)=2O(t)=2 kilograms per hour for 0≤t≤40\le t\le 40≤t≤4. What is the difference between the total input and the net change in the device's stored material over this interval?
Show answer and explanation

Answer: C · Worked explanation

Total input is ∫04(5+t) dt=[5t+t2/2]04=28\int_0^4(5+t)\,dt=[5t+t^2/2]_0^4=28∫04​(5+t)dt=[5t+t2/2]04​=28 kilograms. Net change is ∫04[(5+t)−2] dt=20\int_0^4[(5+t)-2] \,dt=20∫04​[(5+t)−2]dt=20 kilograms, so the difference is 28−20=828-20=828−20=8 kilograms, equal to the material lost. The tempting value 20 kilograms is the net change, not the requested difference.

Keep going

Next topic8.4 Area between curves (functions of x)Previous topic8.2 Position, velocity and acceleration with integrals

More in Unit 8 · Applications of Integration

  1. 8.1Average value of a functionNotes · 10 questions
  2. 8.2Position, velocity and acceleration with integralsNotes · 10 questions
  3. 8.3Accumulation in applied contextsNotes · 10 questions
  4. 8.4Area between curves (functions of x)Notes · 10 questions
  5. 8.5Area between curves (functions of y)Notes · 9 questions
  6. 8.6Area between curves with several intersectionsNotes · 10 questions
  7. 8.7Volumes: square and rectangle cross sectionsNotes · 10 questions
  8. 8.8Volumes: triangle and semicircle cross sectionsNotes · 10 questions
  9. 8.9Disc method about the x- or y-axisNotes · 10 questions

All AP Calculus AB topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A rate accumulates into a total change
  2. 2An initial amount turns net change into an amount
  3. 3Multiple rates combine before their changes accumulate
  4. 4Evaluating a rate integral gives an applied result
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe