Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›7 Differential Equations
  4. ›7.3 Sketching slope fields

AP Calculus BC · Unit 7 · Differential Equations

7.3 Sketching slope fields

Sketch slope fields by calculating slopes, drawing short segments, and recognizing patterns.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4A slope field shows a direction at each point
  1. 1A slope field shows a direction at each point
  2. 2Substitute each point into the differential equation
  3. 3Segment steepness and direction must match the slope
  4. 4Repeated slopes reveal patterns across the field
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: A slope field shows a direction at each point

A slope field is a grid of short line segments. Each segment shows the slope a solution curve would have at that point. For a differential equation written as dydx=f(x,y)\frac{dy}{dx}=f(x,y)dxdy​=f(x,y), the slope at (x,y)(x,y)(x,y) is f(x,y)f(x,y)f(x,y). The segment gives a direction, not the value of yyy. It should be centered on its point and kept short. A slope of zero gives a horizontal segment. Positive slopes rise from left to right; negative slopes fall.

Common mistake

Do not join nearby segments into one line. Each segment shows only the local direction at its own point.

Key terms · tap one for its definition

slope field

A slope field is a collection of short segments showing slopes specified by a differential equation at selected points.

slope

The slope at a point is the value of dydx\frac{dy}{dx}dxdy​ evaluated at that point.

Part 1 done

2

Part 2 of 4: Substitute each point into the differential equation

To sketch a field, evaluate the equation separately at every marked point. Substitute both coordinates when the right side contains both xxx and yyy. The resulting number is the local slope of that point's segment. For example, dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y gives different slopes at (1,0)(1,0)(1,0) and (0,1)(0,1)(0,1) only if their coordinate sums differ. Here, both slopes are 1. Use a consistent segment length across the grid. Change each segment's tilt to represent its calculated slope.

Worked example

Calculate and draw three local slopes

For dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y, find the slopes at (0,0)(0,0)(0,0), (1,0)(1,0)(1,0), and (0,1)(0,1)(0,1). Describe their segments.
  1. 1
    At (0,0)(0,0)(0,0): dydx=0+0=0\frac{dy}{dx}=0+0=0dxdy​=0+0=0.
  2. 2
    At (1,0)(1,0)(1,0): dydx=1+0=1\frac{dy}{dx}=1+0=1dxdy​=1+0=1.
  3. 3
    At (0,1)(0,1)(0,1): dydx=0+1=1\frac{dy}{dx}=0+1=1dxdy​=0+1=1.

Answer: The slopes are 0, 1, and 1, respectively. Draw one horizontal segment and two equally rising segments. Slopes have no units here.

Key term

local slope

A local slope gives the direction of a solution curve at one specified point.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the segment that represents a local slope of 13\frac{1}{3}31​ at a grid point.
Show answer and explanation

Answer: A · Worked explanation

A slope of 13\frac{1}{3}31​ means rise over run is positive and equal to one third, so the segment rises gently as you move from left to right. A falling segment would have a negative slope, while a horizontal segment has slope zero. The segment that rises three units for every one unit to the right is much steeper.
3

Part 3 of 4: Segment steepness and direction must match the slope

Think of a segment's rise over run as its slope. For slope 2, a segment rises twice as much as it runs right. For slope −12-\frac{1}{2}−21​, it falls half as much as it runs right. A larger absolute slope means a steeper segment. A vertical segment does not represent any finite value of dydx\frac{dy}{dx}dxdy​. When the calculated slope is large, draw a steep segment instead. Keep segments short enough that neighboring marks remain separate.

Figure 1. Each segment is centered on a grid point. Its tilt matches the slope there.

Exam tip

For negative slopes, check the direction while moving right. The segment must fall, even if its magnitude is large.

Key terms · tap one for its definition

rise over run

Rise over run is the vertical change divided by the horizontal change along a nonvertical segment.

vertical segment

A vertical segment has zero horizontal change and cannot represent a finite slope.

Part 3 done

4

Part 4 of 4: Repeated slopes reveal patterns across the field

Look for points where the equation gives the same value. If dydx=x\frac{dy}{dx}=xdxdy​=x, slopes depend only on the horizontal coordinate. Segments in each vertical column have the same tilt. If dydx=y\frac{dy}{dx}=ydxdy​=y, segments in each horizontal row have the same tilt. For dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y, points with the same coordinate sum share a slope. These points lie along diagonal lines. A zero-slope set contains every point where the equation's right side equals zero. Its segments are horizontal.

A pattern helps you check your work, but it does not replace substitution. If a segment seems out of place, calculate its slope again. You can then compare it with other points that should have the same tilt.

Key term

zero-slope set

A zero-slope set consists of points where the differential equation gives dydx=0\frac{dy}{dx}=0dxdy​=0.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Calculate[3 marks]

    Calculate the slopes given by dydx=2x−y\frac{dy}{dx}=2x-ydxdy​=2x−y at (0,1)(0,1)(0,1), (1,0)(1,0)(1,0), and (1,2)(1,2)(1,2).

    Show mark schemeHide mark scheme

    Model answer

    The slopes are 2(0)−1=−12(0)-1=-12(0)−1=−1, 2(1)−0=22(1)-0=22(1)−0=2, and 2(1)−2=02(1)-2=02(1)−2=0, respectively.

    • 1 mark for calculating a slope of -1 at (0,1)(0,1)(0,1)
    • 1 mark for calculating a slope of 2 at (1,0)(1,0)(1,0)
    • 1 mark for calculating a slope of 0 at (1,2)(1,2)(1,2)
  2. 2.Describe[3 marks]

    Describe the segments you would draw for slopes 0, -1, and 2.

    Show mark schemeHide mark scheme

    Model answer

    Draw a horizontal segment for 0. Draw a falling segment for -1. Draw a steeper, rising segment for 2.

    • 1 mark for describing a horizontal segment for slope 0
    • 1 mark for describing a segment that falls from left to right for slope -1
    • 1 mark for describing a rising segment with rise twice its run for slope 2
  3. 3.Explain[2 marks]

    Explain the slope pattern in each vertical column for dydx=x\frac{dy}{dx}=xdxdy​=x.

    Show mark schemeHide mark scheme

    Model answer

    Every point in a vertical column has the same xxx-coordinate. Since the slope equals xxx, all segments in that column have the same tilt.

    • 1 mark for stating that points in a vertical column share an xxx-coordinate
    • 1 mark for concluding that their slopes and segment tilts match
  4. 4.Determine[3 marks]

    Determine where segments are horizontal for dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y, and explain why.

    Show mark schemeHide mark scheme

    Model answer

    Segments are horizontal where x+y=0x+y=0x+y=0, or y=−xy=-xy=−x. The differential equation gives slope zero at every point on that line.

    • 1 mark for setting x+yx+yx+y equal to zero
    • 1 mark for identifying the line y=−xy=-xy=−x
    • 1 mark for connecting a slope of zero to horizontal segments
  5. 5.Compare[2 marks]

    Compare segments with slopes -3 and −12-\frac{1}{2}−21​.

    Show mark schemeHide mark scheme

    Model answer

    Both segments fall from left to right. The segment with slope -3 is steeper because its slope has greater absolute value.

    • 1 mark for stating that both segments fall from left to right
    • 1 mark for identifying the slope -3 segment as steeper

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Calculate[1 mark]

Calculate the slope specified by dydx=3x−y\frac{dy}{dx}=3x-ydxdy​=3x−y at (2,1)(2,1)(2,1).
Show answer and explanation

Answer: D · Worked explanation

Substitute x=2x=2x=2 and y=1y=1y=1 into the right side: 3(2)−1=6−1=53(2)-1=6-1=53(2)−1=6−1=5. The local slope at (2,1)(2,1)(2,1) is therefore 5. The value 7 comes from adding yyy instead of subtracting it, a common substitution error.
3.

Easy·Identify[1 mark]

Identify the repeated-slope pattern for the differential equation dydx=y\frac{dy}{dx}=ydxdy​=y.
Show answer and explanation

Answer: D · Worked explanation

In dydx=y\frac{dy}{dx}=ydxdy​=y, the slope depends only on the point's yyy-coordinate. Every point in a horizontal row has the same yyy-coordinate, so its segments have the same tilt. A vertical column instead shares an xxx-coordinate, which would be the key pattern for an equation whose slope depends only on xxx.
4.

Easy·Determine[1 mark]

Determine which segment shape represents a slope of 0 at a point.
Show answer and explanation

Answer: B · Worked explanation

A zero slope means there is no vertical change as the segment moves horizontally, so the segment is horizontal. A vertical segment does not represent a finite value of dydx\frac{dy}{dx}dxdy​. Rising and falling segments represent positive and negative slopes, respectively.
5.

Medium·Calculate[1 mark]

Calculate the slope at (1,−2)(1,-2)(1,−2) for dydx=x2+2y\frac{dy}{dx}=x^2+2ydxdy​=x2+2y.
Show answer and explanation

Answer: B · Worked explanation

Substitute both coordinates into the equation: x2+2y=12+2(−2)=1−4=−3x^2+2y=1^2+2(-2)=1-4=-3x2+2y=12+2(−2)=1−4=−3. Thus the segment at (1,−2)(1,-2)(1,−2) falls from left to right. The value 5 results from using +2+2+2 in place of the point's yyy-coordinate, rather than substituting y=−2y=-2y=−2.
6.

Medium·Determine[1 mark]

Determine which segment best represents a slope of -2 at a grid point.
Show answer and explanation

Answer: B · Worked explanation

A slope of -2 means the segment falls as you move to the right, with a vertical change twice the horizontal change in magnitude. The rising segment has the wrong sign, and the segment falling one unit for every two units to the right has slope −12-\frac{1}{2}−21​, not -2. A horizontal segment represents slope zero.
7.

Medium·Deduce[1 mark]

For dydx=x2\frac{dy}{dx}=x^2dxdy​=x2, deduce how the segment slopes compare at (2,−1)(2,-1)(2,−1) and (2,3)(2,3)(2,3).
Show answer and explanation

Answer: A · Worked explanation

The equation makes the slope depend only on xxx, so both points give 22=42^2=422=4, regardless of their different yyy-coordinates. Their segments therefore have the same rising tilt. The yyy-coordinate would affect the slopes only if it appeared in the differential equation.
8.

Medium·Calculate[1 mark]

At the points (−1,2)(-1,2)(−1,2), (0,2)(0,2)(0,2), and (1,2)(1,2)(1,2), the equation is dydx=2x+y\frac{dy}{dx}=2x+ydxdy​=2x+y. Calculate the slope at (1,2)(1,2)(1,2).
Show answer and explanation

Answer: C · Worked explanation

At (1,2)(1,2)(1,2), substitute x=1x=1x=1 and y=2y=2y=2: 2(1)+2=42(1)+2=42(1)+2=4. The slope is positive, so the segment rises from left to right. The slope 3 would come from incorrectly using x+yx+yx+y rather than the given expression 2x+y2x+y2x+y.
9.

Medium·Determine[2 marks]

Determine which set of points has matching slopes for dydx=x−y\frac{dy}{dx}=x-ydxdy​=x−y.
Show answer and explanation

Answer: B · Worked explanation

For dydx=x−y\frac{dy}{dx}=x-ydxdy​=x−y, points have matching slopes when their differences x−yx-yx−y match. Each point in the set (0,0)(0,0)(0,0), (1,1)(1,1)(1,1), (−2,−2)(-2,-2)(−2,−2) has x−y=0x-y=0x−y=0, so each gives a horizontal segment. The points (0,2)(0,2)(0,2), (1,1)(1,1)(1,1), (2,0)(2,0)(2,0) share a coordinate sum, but their differences are -2, 0, and 2, so their slopes do not match.
10.

Hard·Determine[2 marks]

A field uses dydx=x−2y\frac{dy}{dx}=x-2ydxdy​=x−2y. Determine the segment to draw at (2,1)(2,1)(2,1) and at (0,1)(0,1)(0,1).
Show answer and explanation

Answer: D · Worked explanation

At (2,1)(2,1)(2,1), the slope is 2−2(1)=02-2(1)=02−2(1)=0, so draw a horizontal segment. At (0,1)(0,1)(0,1), it is 0−2(1)=−20-2(1)=-20−2(1)=−2, so draw a steep segment falling to the right. The tempting reversed assignment swaps the coordinates' resulting slopes; evaluating each point separately prevents that mistake.

Keep going

Next topic7.4 Reasoning with slope fieldsPrevious topic7.2 Verifying solutions

More in Unit 7 · Differential Equations

  1. 7.1Modelling with differential equationsNotes · 10 questions
  2. 7.2Verifying solutionsNotes · 10 questions
  3. 7.3Sketching slope fieldsNotes · 10 questions
  4. 7.4Reasoning with slope fieldsNotes · 10 questions
  5. 7.5Euler's methodNotes · 10 questions· BC only
  6. 7.6General solutions by separation of variablesNotes · 10 questions
  7. 7.7Particular solutions with initial conditionsNotes · 10 questions
  8. 7.8Exponential modelsNotes · 10 questions
  9. 7.9Logistic modelsNotes · 10 questions· BC only

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1A slope field shows a direction at each point
  2. 2Substitute each point into the differential equation
  3. 3Segment steepness and direction must match the slope
  4. 4Repeated slopes reveal patterns across the field
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe