Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›7 Differential Equations
  4. ›7.9 Logistic models

AP Calculus BC · Unit 7 · Differential Equations

7.9 Logistic models

Recognize a logistic differential equation, find its carrying capacity and fastest-growth population, and describe how solutions behave in context.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • BC only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A logistic model slows growth as resources run short
  1. 1A logistic model slows growth as resources run short
  2. 2The sign of the rate shows where the population heads
  3. 3Growth is fastest when the population is half capacity
  4. 4Concavity of a solution changes at half capacity
  5. 5Every positive solution levels off at the carrying capacity
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A logistic model slows growth as resources run short

A small fish population in a pond grows quickly at first. Later, food and space run short, and growth slows. An exponential model cannot show this slowdown. A logistic differential equation can.

It has the form dPdt=kP(1−PK)\frac{dP}{dt}=kP\left(1-\frac{P}{K}\right)dtdP​=kP(1−KP​), where PPP is the population and k>0k>0k>0 is a constant. The number KKK is the carrying capacity, the largest population the environment can sustain. When PPP is small, the factor 1−PK1-\frac{P}{K}1−KP​ is close to 1. Early growth then looks exponential.

Worked example

Find the carrying capacity

A population satisfies dPdt=0.3P−0.0005P2\frac{dP}{dt}=0.3P-0.0005P^2dtdP​=0.3P−0.0005P2. Identify its carrying capacity.
  1. 1
    Factor out 0.3P0.3P0.3P: dPdt=0.3P(1−0.00050.3P)\frac{dP}{dt}=0.3P\left(1-\frac{0.0005}{0.3}P\right)dtdP​=0.3P(1−0.30.0005​P).
  2. 2
    Simplify the fraction: 0.00050.3=1600\frac{0.0005}{0.3}=\frac{1}{600}0.30.0005​=6001​.
  3. 3
    Compare with kP(1−PK)kP\left(1-\frac{P}{K}\right)kP(1−KP​), so k=0.3k=0.3k=0.3 and K=600K=600K=600.

Answer: The carrying capacity is K=600K=600K=600.

Exam tip

Keep the two constants apart. Lowercase kkk controls how fast early growth is, and capital KKK is the carrying capacity.

Key terms · tap one for its definition

logistic differential equation

A logistic differential equation has the form dPdt=kP(1−PK)\frac{dP}{dt}=kP\left(1-\frac{P}{K}\right)dtdP​=kP(1−KP​) with constants k>0k>0k>0 and K>0K>0K>0.

carrying capacity

The carrying capacity KKK is the largest population an environment can sustain, in the same units as PPP.

Part 1 done

2

Part 2 of 5: The sign of the rate shows where the population heads

Now read the equation one factor at a time. Because k>0k>0k>0 and P>0P>0P>0, the sign of dPdt\frac{dP}{dt}dtdP​ depends on 1−PK1-\frac{P}{K}1−KP​. A population below KKK makes that factor positive. A population above KKK makes it negative. In plain terms, a population below capacity has room to grow. One above capacity has more members than its resources can support.

Two populations give a rate of zero: P=0P=0P=0 and P=KP=KP=K. A solution that stays at one of these values is an equilibrium solution. A population that starts at KKK stays there. On a graph of PPP against ttt, each equilibrium appears as a horizontal line.

Sign of the rate for a logistic model

PopulationRate dPdt\frac{dP}{dt}dtdP​Behavior
0<P<K0<P<K0<P<KPositiveIncreases toward KKK
P=KP=KP=KZeroStays constant
P>KP>KP>KNegativeDecreases toward KKK
Population
0<P<K0<P<K0<P<K
Rate dPdt\frac{dP}{dt}dtdP​
Positive
Behavior
Increases toward KKK
Population
P=KP=KP=K
Rate dPdt\frac{dP}{dt}dtdP​
Zero
Behavior
Stays constant
Population
P>KP>KP>K
Rate dPdt\frac{dP}{dt}dtdP​
Negative
Behavior
Decreases toward KKK

The table is often enough to sketch the long-term behavior without solving the equation at all.

Key term

equilibrium solution

An equilibrium solution is a constant solution, so its rate of change is zero at every time.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the logistic differential equation.
Show answer and explanation

Answer: B · Worked explanation

A logistic equation has the form kP(1−PK)kP\left(1-\frac{P}{K}\right)kP(1−KP​), so growth depends on both PPP and the room left. The equation dPdt=0.3P\frac{dP}{dt}=0.3PdtdP​=0.3P is exponential, with no limiting factor. The equation dPdt=0.3(500−P)\frac{dP}{dt}=0.3(500-P)dtdP​=0.3(500−P) depends only on the gap from 500 and has no factor of PPP.
3

Part 3 of 5: Growth is fastest when the population is half capacity

Next, find where the population grows fastest. Treat the rate as a function of PPP, so that ordinary calculus can locate its largest value: dPdt=kP−kKP2\frac{dP}{dt}=kP-\frac{k}{K}P^2dtdP​=kP−Kk​P2.

This is a parabola in PPP that opens downward, so its maximum is at the vertex. Setting the derivative with respect to PPP equal to zero gives k−2kKP=0k-\frac{2k}{K}P=0k−K2k​P=0. Therefore P=K2P=\frac{K}{2}P=2K​.

At that population, the rate is dPdt=k⋅K2(1−12)=kK4\frac{dP}{dt}=k\cdot\frac{K}{2}\left(1-\frac{1}{2}\right)=\frac{kK}{4}dtdP​=k⋅2K​(1−21​)=4kK​. This largest rate depends only on kkk and KKK.

Growth is slow when the population is tiny and slow again near capacity. The peak lies between those two extremes.

Figure 1. The curve rises fastest at half the carrying capacity and then levels off at the carrying capacity.

Worked example

Find the fastest growth

A deer herd satisfies dPdt=0.2P(1−P800)\frac{dP}{dt}=0.2P\left(1-\frac{P}{800}\right)dtdP​=0.2P(1−800P​), where PPP is in deer and ttt is in years. Find the herd size at which growth is fastest and that rate.
  1. 1
    Identify K=800K=800K=800 and k=0.2k=0.2k=0.2.
  2. 2
    Fastest growth occurs at P=K2=8002=400P=\frac{K}{2}=\frac{800}{2}=400P=2K​=2800​=400.
  3. 3
    Substitute: dPdt=0.2(400)(1−400800)=80(12)=40\frac{dP}{dt}=0.2(400)\left(1-\frac{400}{800}\right)=80\left(\frac{1}{2}\right)=40dtdP​=0.2(400)(1−800400​)=80(21​)=40.
  4. 4
    Check with kK4=0.2(800)4=40\frac{kK}{4}=\frac{0.2(800)}{4}=404kK​=40.2(800)​=40.

Answer: Growth is fastest at 400 deer, at a rate of 40 deer/year.

Common mistake

Fastest growth does not occur at the carrying capacity. At P=KP=KP=K the rate of change is zero.

Part 3 done

4

Part 4 of 5: Concavity of a solution changes at half capacity

The same population also shapes the solution curve. Differentiate the rate with respect to ttt, using the chain rule. This gives d2Pdt2=k(1−2PK)dPdt\frac{d^2P}{dt^2}=k\left(1-\frac{2P}{K}\right)\frac{dP}{dt}dt2d2P​=k(1−K2P​)dtdP​.

The sign of this product sets the concavity. Check the sign of each factor in turn.

  • Below K2\frac{K}{2}2K​: both factors are positive, so the curve is concave up.
  • Between K2\frac{K}{2}2K​ and KKK: the first factor is negative, so the curve is concave down.
  • Above KKK: both factors are negative, so the curve is concave up and falling.

At P=K2P=\frac{K}{2}P=2K​ the concavity changes, so the curve has an inflection point there. This matches the fastest growth found above.

Key term

inflection point

An inflection point is a point on a graph where concavity changes.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify the carrying capacity in dPdt=0.05P(1−P2400)\frac{dP}{dt}=0.05P\left(1-\frac{P}{2400}\right)dtdP​=0.05P(1−2400P​).
Show answer and explanation

Answer: C · Worked explanation

Compare with kP(1−PK)kP\left(1-\frac{P}{K}\right)kP(1−KP​). The number under PPP in the bracket is K=2400K=2400K=2400. The value 0.05 is the constant kkk, not the capacity. The value 1200 is half the capacity, which is where growth is fastest, not the limit. Reading KKK directly from the bracket is the quickest route.
5

Part 5 of 5: Every positive solution levels off at the carrying capacity

Finally, consider the long-term outcome. If P(0)>0P(0)>0P(0)>0, the solution approaches KKK as time grows. The limiting value is lim⁡t→∞P(t)=K\lim_{t\to\infty}P(t)=Klimt→∞​P(t)=K, whether the population starts below or above KKK.

Only a population that starts at zero avoids this. It stays at zero for all time, because no one is present to reproduce.

In context, the limiting value is the long-run level that the environment supports. A fish population levels off near KKK fish, and a colony measured in thousands levels off near KKK thousand.

Worked example

Interpret the limit

A trout population satisfies dPdt=0.1P(1−P1200)\frac{dP}{dt}=0.1P\left(1-\frac{P}{1200}\right)dtdP​=0.1P(1−1200P​) with P(0)=300P(0)=300P(0)=300. Find lim⁡t→∞P(t)\lim_{t\to\infty}P(t)limt→∞​P(t) and interpret it.
  1. 1
    The equation is logistic with K=1200K=1200K=1200.
  2. 2
    Since P(0)=300P(0)=300P(0)=300 is positive, the solution approaches KKK.
  3. 3
    So lim⁡t→∞P(t)=1200\lim_{t\to\infty}P(t)=1200limt→∞​P(t)=1200.

Answer: The limit is 1200. In the long run, the lake supports about 1200 trout.

Exam tip

When asked to interpret a limit, name the quantity, give its long-run value and include the units.

Go deeperWhere the solution formula comes from

Separation of variables solves the equation. For 0<P(0)<K0<P(0)<K0<P(0)<K it gives P(t)=K1+Ae−ktP(t)=\frac{K}{1+Ae^{-kt}}P(t)=1+Ae−ktK​, with A=K−P(0)P(0)A=\frac{K-P(0)}{P(0)}A=P(0)K−P(0)​. As ttt grows, e−kte^{-kt}e−kt approaches zero, so P(t)P(t)P(t) approaches KKK.

The curve in the figure uses K=1000K=1000K=1000, k=0.5k=0.5k=0.5 and P(0)=100P(0)=100P(0)=100, so A=9A=9A=9. You may also see the rate written as kKP(K−P)\frac{k}{K}P(K-P)Kk​P(K−P). It is the same equation.

Key term

limiting value

The limiting value of a solution P(t)P(t)P(t) is lim⁡t→∞P(t)\lim_{t\to\infty}P(t)limt→∞​P(t), the level it approaches over a long time.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify the carrying capacity in dPdt=0.2P(1−P450)\frac{dP}{dt}=0.2P\left(1-\frac{P}{450}\right)dtdP​=0.2P(1−450P​).

    Show mark schemeHide mark scheme

    Model answer

    The carrying capacity is K=450K=450K=450.

    • 1 mark for identifying K=450K=450K=450
  2. 2.Determine[3 marks]

    Determine the population at which dPdt=0.1P(1−P900)\frac{dP}{dt}=0.1P\left(1-\frac{P}{900}\right)dtdP​=0.1P(1−900P​) is largest, and calculate that rate. Here PPP is in individuals and ttt is in years.

    Show mark schemeHide mark scheme

    Model answer

    Growth is fastest at P=K2=450P=\frac{K}{2}=450P=2K​=450. The rate is then 0.1(450)(1−450900)=22.50.1(450)\left(1-\frac{450}{900}\right)=22.50.1(450)(1−900450​)=22.5 individuals/year.

    • 1 mark for identifying K=900K=900K=900 and the fastest growth at P=K2=450P=\frac{K}{2}=450P=2K​=450
    • 1 mark for substituting P=450P=450P=450 into the rate
    • 1 mark for obtaining 22.5 individuals/year
  3. 3.Explain[2 marks]

    Explain why a logistic population with 0<P<K0<P<K0<P<K increases.

    Show mark schemeHide mark scheme

    Model answer

    In this range kkk, PPP and 1−PK1-\frac{P}{K}1−KP​ are all positive, so dPdt>0\frac{dP}{dt}>0dtdP​>0. A positive rate of change means the population increases.

    • 1 mark for stating that kkk, PPP and 1−PK1-\frac{P}{K}1−KP​ are all positive
    • 1 mark for concluding that dPdt>0\frac{dP}{dt}>0dtdP​>0, so the population increases
  4. 4.Describe[3 marks]

    Describe how the solution with P(0)=K4P(0)=\frac{K}{4}P(0)=4K​ behaves over a long time.

    Show mark schemeHide mark scheme

    Model answer

    The population increases and is concave up until it reaches K2\frac{K}{2}2K​. It then keeps increasing but is concave down. It levels off, approaching KKK without exceeding it.

    • 1 mark for stating that the population increases
    • 1 mark for stating that concavity changes from up to down at P=K2P=\frac{K}{2}P=2K​
    • 1 mark for stating that the population approaches KKK without exceeding it
  5. 5.Interpret[2 marks]

    Interpret lim⁡t→∞P(t)=650\lim_{t\to\infty}P(t)=650limt→∞​P(t)=650 for a model of deer in a reserve, where PPP is the number of deer.

    Show mark schemeHide mark scheme

    Model answer

    In the long run, the deer population levels off near 650 deer. This is the carrying capacity of the reserve.

    • 1 mark for stating that the population approaches 650 deer over a long time
    • 1 mark for identifying 650 as the carrying capacity
  6. 6.Justify[2 marks]

    Justify that dPdt=kP(1−PK)\frac{dP}{dt}=kP\left(1-\frac{P}{K}\right)dtdP​=kP(1−KP​) is greatest at P=K2P=\frac{K}{2}P=2K​.

    Show mark schemeHide mark scheme

    Model answer

    Write the rate as kP−kKP2kP-\frac{k}{K}P^2kP−Kk​P2. Its derivative with respect to PPP is k−2kKPk-\frac{2k}{K}Pk−K2k​P, which is zero at P=K2P=\frac{K}{2}P=2K​. The parabola opens downward, so this is a maximum.

    • 1 mark for showing that the derivative with respect to PPP is zero at P=K2P=\frac{K}{2}P=2K​
    • 1 mark for noting that the parabola opens downward, so the point is a maximum

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

A population satisfies dPdt=0.2P(1−P900)\frac{dP}{dt}=0.2P\left(1-\frac{P}{900}\right)dtdP​=0.2P(1−900P​) with P(0)=300P(0)=300P(0)=300. What is lim⁡t→∞P(t)\lim_{t\to\infty}P(t)limt→∞​P(t)?
Show answer and explanation

Answer: D · Worked explanation

The equation is logistic with K=900K=900K=900. Because P(0)=300P(0)=300P(0)=300 is positive, the solution approaches the carrying capacity, so the limit is 900. A logistic solution does not grow without bound, so ∞\infty∞ is wrong. The starting value 300 is only where the population begins.
4.

Medium·Calculate[2 marks]

Fish in a pond satisfy dPdt=0.04P(1−P1500)\frac{dP}{dt}=0.04P\left(1-\frac{P}{1500}\right)dtdP​=0.04P(1−1500P​), where ttt is in months. Calculate the maximum value of dPdt\frac{dP}{dt}dtdP​.
Show answer and explanation

Answer: B · Worked explanation

The rate is greatest at P=K2=750P=\frac{K}{2}=750P=2K​=750. Then dPdt=0.04(750)(1−7501500)=30⋅12=15\frac{dP}{dt}=0.04(750)\left(1-\frac{750}{1500}\right)=30\cdot\frac{1}{2}=15dtdP​=0.04(750)(1−1500750​)=30⋅21​=15 fish/month. The value 30 comes from forgetting the factor 12\frac{1}{2}21​. The value 750 is the population at which the maximum occurs, not the rate itself. A quick check uses kK4=0.04(1500)4=15\frac{kK}{4}=\frac{0.04(1500)}{4}=154kK​=40.04(1500)​=15, which agrees.
5.

Medium·Determine[1 mark]

Determine the population at which the model dPdt=0.3P−0.0005P2\frac{dP}{dt}=0.3P-0.0005P^2dtdP​=0.3P−0.0005P2 grows fastest.
Show answer and explanation

Answer: D · Worked explanation

Factor the rate as 0.3P(1−P600)0.3P\left(1-\frac{P}{600}\right)0.3P(1−600P​), so K=600K=600K=600. Growth is fastest at K2=300\frac{K}{2}=3002K​=300. The vertex of the parabola gives the same result: P=0.32(0.0005)=300P=\frac{0.3}{2(0.0005)}=300P=2(0.0005)0.3​=300. The value 600 is the carrying capacity, where the rate is zero. Check: the rate at P=300P=300P=300 is 90−45=4590-45=4590−45=45, while at P=250P=250P=250 and P=350P=350P=350 it is 43.75.
6.

Medium·Predict[1 mark]

A population satisfies dPdt=0.1P(1−P900)\frac{dP}{dt}=0.1P\left(1-\frac{P}{900}\right)dtdP​=0.1P(1−900P​) with P(0)=1200P(0)=1200P(0)=1200. Predict the behavior of the solution.
Show answer and explanation

Answer: A · Worked explanation

At P=1200P=1200P=1200, dPdt=0.1(1200)(1−1200900)=120(−13)=−40\frac{dP}{dt}=0.1(1200)\left(1-\frac{1200}{900}\right)=120\left(-\frac{1}{3}\right)=-40dtdP​=0.1(1200)(1−9001200​)=120(−31​)=−40. The rate is negative, so the population falls toward K=900K=900K=900. It does not reach 0, because P=0P=0P=0 is a separate equilibrium. A constant solution requires P=0P=0P=0 or P=900P=900P=900. Because the rate is negative at the start, the curve slopes downward and levels off at 900 from above.
7.

Medium·Interpret[1 mark]

A bacteria count NNN, in thousands, satisfies dNdt=0.5N(1−N80)\frac{dN}{dt}=0.5N\left(1-\frac{N}{80}\right)dtdN​=0.5N(1−80N​) with N(0)=5N(0)=5N(0)=5 and ttt in hours. Interpret lim⁡t→∞N(t)=80\lim_{t\to\infty}N(t)=80limt→∞​N(t)=80.
Show answer and explanation

Answer: C · Worked explanation

The limiting value describes the long-run size. Since K=80K=80K=80 thousand, the colony levels off near 80 thousand bacteria. It does not give a time at which this happens. Growth is fastest at K2=40\frac{K}{2}=402K​=40 thousand bacteria, not at 80 thousand, where the rate is zero.
8.

Hard·Determine[2 marks]

A population satisfies dPdt=0.2P(1−P500)\frac{dP}{dt}=0.2P\left(1-\frac{P}{500}\right)dtdP​=0.2P(1−500P​). At P=300P=300P=300, determine d2Pdt2\frac{d^2P}{dt^2}dt2d2P​ and the concavity.
Show answer and explanation

Answer: A · Worked explanation

Here dPdt=0.2(300)(0.4)=24\frac{dP}{dt}=0.2(300)(0.4)=24dtdP​=0.2(300)(0.4)=24. The factor k(1−2PK)=0.2(1−1.2)=−0.04k\left(1-\frac{2P}{K}\right)=0.2(1-1.2)=-0.04k(1−K2P​)=0.2(1−1.2)=−0.04. So d2Pdt2=−0.04(24)=−0.96\frac{d^2P}{dt^2}=-0.04(24)=-0.96dt2d2P​=−0.04(24)=−0.96, which is negative, so the curve is concave down. The value -0.04 leaves out the factor dPdt\frac{dP}{dt}dtdP​. A sign check helps: 300 is above K2=250\frac{K}{2}=2502K​=250, so the curve is past its inflection point and is concave down.
9.

Hard[2 marks]

A logistic model has K=1000K=1000K=1000 and P(0)=500P(0)=500P(0)=500. Which statement is correct?
Show answer and explanation

Answer: A · Worked explanation

Because P(0)=K2P(0)=\frac{K}{2}P(0)=2K​, the population starts where the rate is at its maximum, kK4\frac{kK}{4}4kK​. As PPP rises above 500, the rate falls. For P>K2P>\frac{K}{2}P>2K​ the curve is concave down, so concave up is wrong. The rate is zero only at P=0P=0P=0 or P=1000P=1000P=1000.
10.

Hard·Calculate[2 marks]

A population satisfies dPdt=kP(1−P900)\frac{dP}{dt}=kP\left(1-\frac{P}{900}\right)dtdP​=kP(1−900P​), and dPdt=20\frac{dP}{dt}=20dtdP​=20 individuals/year when P=300P=300P=300. Calculate the maximum rate of growth.
Show answer and explanation

Answer: D · Worked explanation

At P=300P=300P=300: k(300)(1−13)=200k=20k(300)\left(1-\frac{1}{3}\right)=200k=20k(300)(1−31​)=200k=20, so k=0.1k=0.1k=0.1. The maximum occurs at P=450P=450P=450: 0.1(450)(12)=22.50.1(450)\left(\frac{1}{2}\right)=22.50.1(450)(21​)=22.5 individuals/year. The value 30 comes from using kPkPkP alone with P=300P=300P=300. The value 20 is just the given rate at P=300P=300P=300, which is not the maximum. Check: kK4=0.1(900)4=22.5\frac{kK}{4}=\frac{0.1(900)}{4}=22.54kK​=40.1(900)​=22.5 gives the same value.

Keep going

Next topic8.1 Average value of a functionPrevious topic7.8 Exponential models

More in Unit 7 · Differential Equations

  1. 7.1Modelling with differential equationsNotes · 10 questions
  2. 7.2Verifying solutionsNotes · 10 questions
  3. 7.3Sketching slope fieldsNotes · 10 questions
  4. 7.4Reasoning with slope fieldsNotes · 10 questions
  5. 7.5Euler's methodNotes · 10 questions· BC only
  6. 7.6General solutions by separation of variablesNotes · 10 questions
  7. 7.7Particular solutions with initial conditionsNotes · 10 questions
  8. 7.8Exponential modelsNotes · 10 questions
  9. 7.9Logistic modelsNotes · 10 questions· BC only

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A logistic model slows growth as resources run short
  2. 2The sign of the rate shows where the population heads
  3. 3Growth is fastest when the population is half capacity
  4. 4Concavity of a solution changes at half capacity
  5. 5Every positive solution levels off at the carrying capacity
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

A logistic solution over time

Population P (individuals)0510152002004006008001000Time t (years)
  • Population P
  • Carrying capacity K = 1000
  • Fastest growth, P = 500