Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Calculus BC
  3. ›7 Differential Equations
  4. ›7.5 Euler's method

AP Calculus BC · Unit 7 · Differential Equations

7.5 Euler's method

Use Euler’s method to estimate solution values, interpret step size, and compare estimates with exact values.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
  • BC only
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A differential equation tells you the slope at each point
  1. 1A differential equation tells you the slope at each point
  2. 2Each Euler step moves along the current slope
  3. 3The step size controls how often the slope is updated
  4. 4Worked steps produce an estimate of a solution value
  5. 5Concavity tells whether Euler estimates run low or high
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A differential equation tells you the slope at each point

Imagine walking through fog. You can read the direction at your feet, so you take a short step and look again. A differential equation gives the same kind of information: the slope at every point.

Take dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y. At the point (0,1)(0,1)(0,1) the slope is 0+1=10+1=10+1=1. An initial condition such as y(0)=1y(0)=1y(0)=1 fixes the starting point. The slope there tells us which way to head.

No formula for yyy is needed to read slopes. The equation alone supplies the slope wherever xxx and yyy are known. Euler’s method exploits exactly that fact.

Key terms · tap one for its definition

differential equation

A differential equation is an equation involving a function and at least one of its derivatives.

initial condition

An initial condition gives a function value at a specified input, allowing the constant of integration to be found.

Part 1 done

2

Part 2 of 5: Each Euler step moves along the current slope

Now turn the fog walk into arithmetic. Start at (x0,y0)(x_0,y_0)(x0​,y0​) and move a horizontal distance Δx\Delta xΔx along the slope there. Euler’s method repeats this from each new point.

The formulas are xn+1=xn+Δxx_{n+1}=x_n+\Delta xxn+1​=xn​+Δx and yn+1=yn+dydx∣(xn,yn)Δxy_{n+1}=y_n+\frac{dy}{dx}\Big|_{(x_n,y_n)}\Delta xyn+1​=yn​+dxdy​​(xn​,yn​)​Δx. The new yyy-value is the old value plus the slope times the step.

  • Compute the slope at the current point (xn,yn)(x_n,y_n)(xn​,yn​).
  • Multiply the slope by Δx\Delta xΔx.
  • Add the product to yny_nyn​ to get yn+1y_{n+1}yn+1​.
  • Add Δx\Delta xΔx to xnx_nxn​ to get xn+1x_{n+1}xn+1​.

Exam tip

Keep a table with columns for xnx_nxn​, yny_nyn​, the slope, and yn+1y_{n+1}yn+1​. It makes arithmetic slips easy to spot.

Key term

Euler’s method

Euler’s method is a numerical procedure that estimates solution values by stepping repeatedly along the slope given by dydx\frac{dy}{dx}dxdy​.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the correct formula for one step of Euler’s method.
Show answer and explanation

Answer: C · Worked explanation

Euler’s method adds the slope at the current point times the step to the current yyy-value. Using the slope at the new point would require yn+1y_{n+1}yn+1​ before it is known. The form yn+Δxy_n+\Delta xyn​+Δx ignores the differential equation entirely. Test the form on y′=x+yy'=x+yy′=x+y at (0,1)(0,1)(0,1) with Δx=0.5\Delta x=0.5Δx=0.5: it gives 1+1(0.5)=1.51+1(0.5)=1.51+1(0.5)=1.5.
3

Part 3 of 5: The step size controls how often the slope is updated

Next, look at Δx\Delta xΔx. The step size is the horizontal distance covered before the slope is recalculated. A smaller step size needs more steps to reach the same xxx-value. It also refreshes the slope more often. Smaller steps cost more arithmetic, and that is the trade-off.

The number of steps is the distance in xxx divided by Δx\Delta xΔx. From x=0x=0x=0 to x=1x=1x=1 with Δx=0.5\Delta x=0.5Δx=0.5, that is 1−00.5=2\frac{1-0}{0.5}=20.51−0​=2 steps. A negative Δx\Delta xΔx moves the estimate to the left, using the same formula.

Common mistake

The step size is a change in xxx, not in yyy. The change in yyy for one step is the slope times Δx\Delta xΔx.

Key term

step size

The step size is the fixed change in xxx, written Δx\Delta xΔx, between consecutive points in Euler’s method.

Part 3 done

4

Part 4 of 5: Worked steps produce an estimate of a solution value

Now run the full procedure on dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y with y(0)=1y(0)=1y(0)=1. The goal is an estimate of y(1)y(1)y(1), using Δx=0.5\Delta x=0.5Δx=0.5. Two steps reach x=1x=1x=1. Work from left to right. At each point, compute the slope from the equation, take the step, and record the new point.

Worked example

Two Euler steps

Estimate y(1)y(1)y(1) for dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y, y(0)=1y(0)=1y(0)=1, using Δx=0.5\Delta x=0.5Δx=0.5.
  1. 1
    Step 1 starts at (0,1)(0,1)(0,1). The slope is 0+1=10+1=10+1=1.
  2. 2
    Then y1=1+1(0.5)=1.5y_1=1+1(0.5)=1.5y1​=1+1(0.5)=1.5 and x1=0.5x_1=0.5x1​=0.5.
  3. 3
    Step 2 starts at (0.5,1.5)(0.5,1.5)(0.5,1.5). The slope is 0.5+1.5=20.5+1.5=20.5+1.5=2.
  4. 4
    Then y2=1.5+2(0.5)=2.5y_2=1.5+2(0.5)=2.5y2​=1.5+2(0.5)=2.5 and x2=1x_2=1x2​=1.

Answer: y(1)≈2.5y(1)\approx 2.5y(1)≈2.5

Use ≈\approx≈ for the result, since it is an estimate and not an exact value. Each new point is only as accurate as the one before it, because each step starts from an estimated yyy-value. Errors can therefore build up as the steps continue.

Part 4 done

Quick check

One question on the part you just read

Easy

Identify what the step size Δx\Delta xΔx represents in Euler’s method.
Show answer and explanation

Answer: A · Worked explanation

The step size is the fixed change in xxx between consecutive points. The change in yyy for a step is the slope times Δx\Delta xΔx, so it is a different quantity. The total interval length equals the number of steps times Δx\Delta xΔx.
5

Part 5 of 5: Concavity tells whether Euler estimates run low or high

Now compare the estimate with the truth. This equation has the solution y=2ex−x−1y=2e^x-x-1y=2ex−x−1, which gives y(1)=2e−2≈3.437y(1)=2e-2\approx3.437y(1)=2e−2≈3.437. Our estimate of 2.5 is low, with a gap of about 0.937.

Figure 1. The two Euler segments stay below the exact solution curve, which is concave up.

Here d2ydx2=1+x+y\frac{d^2y}{dx^2}=1+x+ydx2d2y​=1+x+y, which is positive, so the solution curve is concave up. Tangent lines to a concave-up curve lie below it, so the estimates run low. For a concave-down curve, they run high.

Effect of step size on the estimate of y(1)

Step sizeStepsEstimate
0.522.500
0.2542.883
Exact valuenone3.437
Step size
0.5
Steps
2
Estimate
2.500
Step size
0.25
Steps
4
Estimate
2.883
Step size
Exact value
Steps
none
Estimate
3.437

Halving the step size brings the estimate closer to the exact value. Smaller steps follow the curve more closely. The estimate rose from 2.500 to 2.883 but stays below 3.437, which fits the concave-up reasoning.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Estimate[3 marks]

    Estimate y(1)y(1)y(1) using Euler’s method with Δx=0.5\Delta x=0.5Δx=0.5 for dydx=2y\frac{dy}{dx}=2ydxdy​=2y, y(0)=1y(0)=1y(0)=1.

    Show mark schemeHide mark scheme

    Model answer

    At (0,1)(0,1)(0,1) the slope is 2, so y1=1+2(0.5)=2y_1=1+2(0.5)=2y1​=1+2(0.5)=2. At (0.5,2)(0.5,2)(0.5,2) the slope is 4, so y2=2+4(0.5)=4y_2=2+4(0.5)=4y2​=2+4(0.5)=4. Thus y(1)≈4y(1)\approx4y(1)≈4.

    • 1 mark for finding the first slope 2 and y1=2y_1=2y1​=2
    • 1 mark for finding the second slope 4 and y2=4y_2=4y2​=4
    • 1 mark for stating the estimate y(1)≈4y(1)\approx4y(1)≈4
  2. 2.Calculate[2 marks]

    Calculate the number of steps needed to go from x=2x=2x=2 to x=5x=5x=5 with step size 0.25.

    Show mark schemeHide mark scheme

    Model answer

    The number of steps is 5−20.25=12\frac{5-2}{0.25}=120.255−2​=12.

    • 1 mark for dividing the distance 5−25-25−2 by the step size
    • 1 mark for obtaining 12 steps
  3. 3.Describe[2 marks]

    Describe what happens to an Euler’s method estimate when the step size is halved.

    Show mark schemeHide mark scheme

    Model answer

    The number of steps doubles and the slope is updated more often. The estimate usually moves closer to the exact value.

    • 1 mark for stating that more steps are needed and the slope is updated more often
    • 1 mark for stating that the estimate usually becomes more accurate
  4. 4.Explain[3 marks]

    Explain why Euler’s method gives an underestimate when the solution curve is concave up.

    Show mark schemeHide mark scheme

    Model answer

    Each step follows a tangent line direction. A tangent line to a concave-up curve lies below the curve, so each step falls short. The estimates therefore run below the true values.

    • 1 mark for stating that each step follows a tangent line direction
    • 1 mark for stating that tangent lines to a concave-up curve lie below it
    • 1 mark for concluding that the estimates are too low
  5. 5.Identify[2 marks]

    Identify the formula for yn+1y_{n+1}yn+1​ in Euler’s method.

    Show mark schemeHide mark scheme

    Model answer

    yn+1=yn+dydx∣(xn,yn)Δxy_{n+1}=y_n+\frac{dy}{dx}\Big|_{(x_n,y_n)}\Delta xyn+1​=yn​+dxdy​​(xn​,yn​)​Δx.

    • 1 mark for starting from yny_nyn​
    • 1 mark for adding the slope at (xn,yn)(x_n,y_n)(xn​,yn​) times Δx\Delta xΔx

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Calculate[1 mark]

Calculate the first Euler step y1y_1y1​ for dydx=y+1\frac{dy}{dx}=y+1dxdy​=y+1, y(0)=2y(0)=2y(0)=2, with Δx=0.1\Delta x=0.1Δx=0.1.
Show answer and explanation

Answer: D · Worked explanation

The slope at (0,2)(0,2)(0,2) is 2+1=32+1=32+1=3. Then y1=2+3(0.1)=2.3y_1=2+3(0.1)=2.3y1​=2+3(0.1)=2.3. The value 0.3 is the change in yyy alone, not the new yyy-value. Always compute the slope first, using the current xxx and yyy. Only then multiply by the step. Rounding to a few decimals at the end is enough for estimates like this.
4.

Medium·Calculate[2 marks]

Calculate the estimate of y(2)y(2)y(2) for dydx=x−y\frac{dy}{dx}=x-ydxdy​=x−y, y(1)=2y(1)=2y(1)=2, using Δx=0.5\Delta x=0.5Δx=0.5.
Show answer and explanation

Answer: B · Worked explanation

At (1,2)(1,2)(1,2) the slope is 1−2=−11-2=-11−2=−1, so y(1.5)≈2+(−1)(0.5)=1.5y(1.5)\approx2+(-1)(0.5)=1.5y(1.5)≈2+(−1)(0.5)=1.5. At (1.5,1.5)(1.5,1.5)(1.5,1.5) the slope is 0, so y(2)≈1.5+0(0.5)=1.5y(2)\approx1.5+0(0.5)=1.5y(2)≈1.5+0(0.5)=1.5. The value 1.0 comes from reusing the first slope -1 in the second step instead of recomputing it. Recomputing the slope at each new point is what separates Euler’s method from a single straight-line estimate.
5.

Medium·Determine[1 mark]

Determine the number of Euler steps needed from x=1x=1x=1 to x=3x=3x=3 with Δx=0.2\Delta x=0.2Δx=0.2.
Show answer and explanation

Answer: A · Worked explanation

The number of steps is 3−10.2=10\frac{3-1}{0.2}=100.23−1​=10. The value 11 counts the points, including the starting point, rather than the steps. The value 5 comes from dividing a distance of 1 by 0.2. Always check that 1+10(0.2)=31+10(0.2)=31+10(0.2)=3 lands on the final xxx-value.
6.

Medium·Determine[1 mark]

A solution to a differential equation is concave down on an interval. Determine how an Euler’s method estimate on that interval compares with the true values.
Show answer and explanation

Answer: C · Worked explanation

Each Euler step follows a tangent-line direction. A tangent line to a concave-down curve lies above the curve, so the estimates run high. Too low would be correct for a concave-up curve, which is the opposite case. This reasoning depends on concavity, which is why the sign of the second derivative matters when judging an estimate.
7.

Medium·Calculate[2 marks]

Calculate the estimate of y(1)y(1)y(1) for dydx=y\frac{dy}{dx}=ydxdy​=y, y(0)=1y(0)=1y(0)=1, using Δx=0.5\Delta x=0.5Δx=0.5.
Show answer and explanation

Answer: D · Worked explanation

Step one has slope 1, so y(0.5)≈1+1(0.5)=1.5y(0.5)\approx1+1(0.5)=1.5y(0.5)≈1+1(0.5)=1.5. Step two has slope 1.5, so y(1)≈1.5+1.5(0.5)=2.25y(1)\approx1.5+1.5(0.5)=2.25y(1)≈1.5+1.5(0.5)=2.25. The value 2.00 comes from using the starting slope 1 in both steps. The exact solution is y=exy=e^xy=ex, so the true value is e≈2.718e\approx2.718e≈2.718. The estimate is lower, consistent with a concave-up solution.
8.

Hard·Calculate[2 marks]

Calculate the estimate of y(1)y(1)y(1) for dydx=y\frac{dy}{dx}=ydxdy​=y, y(0)=1y(0)=1y(0)=1, using Δx=0.25\Delta x=0.25Δx=0.25.
Show answer and explanation

Answer: B · Worked explanation

Each step multiplies yyy by 1+0.25=1.251+0.25=1.251+0.25=1.25, because the slope equals yyy. After four steps, y(1)≈1.254≈2.441y(1)\approx1.25^4\approx2.441y(1)≈1.254≈2.441. The value 2.250 is the estimate from the larger step size 0.5, and 2.718 is the exact value eee, which Euler’s method does not reach.
9.

Hard·Calculate[2 marks]

Calculate the estimate of y(0.5)y(0.5)y(0.5) for dydx=x+y\frac{dy}{dx}=x+ydxdy​=x+y, y(1)=2y(1)=2y(1)=2, using Δx=−0.5\Delta x=-0.5Δx=−0.5.
Show answer and explanation

Answer: A · Worked explanation

The slope at (1,2)(1,2)(1,2) is 1+2=31+2=31+2=3. With Δx=−0.5\Delta x=-0.5Δx=−0.5, y(0.5)≈2+3(−0.5)=0.5y(0.5)\approx2+3(-0.5)=0.5y(0.5)≈2+3(−0.5)=0.5. The value 3.5 results from using +0.5+0.5+0.5 for the step, which moves right instead of left. Check the direction: moving left by 0.5 from x=1x=1x=1 lands at x=0.5x=0.5x=0.5, and yyy falls because the slope 3 is positive.
10.

Hard·Calculate[2 marks]

Calculate the estimate of y(1)y(1)y(1) for dydx=xy\frac{dy}{dx}=xydxdy​=xy, y(0)=1y(0)=1y(0)=1, using Δx=0.5\Delta x=0.5Δx=0.5.
Show answer and explanation

Answer: C · Worked explanation

At (0,1)(0,1)(0,1) the slope is 0⋅1=00\cdot1=00⋅1=0, so y(0.5)≈1y(0.5)\approx1y(0.5)≈1. At (0.5,1)(0.5,1)(0.5,1) the slope is 0.5, so y(1)≈1+0.5(0.5)=1.25y(1)\approx1+0.5(0.5)=1.25y(1)≈1+0.5(0.5)=1.25. The value 1.00 stops after the first step, whose zero slope leaves yyy unchanged. The value 1.65 is the exact solution’s value at x=1x=1x=1, not an Euler estimate.

Keep going

Next topic7.6 General solutions by separation of variablesPrevious topic7.4 Reasoning with slope fields

More in Unit 7 · Differential Equations

  1. 7.1Modelling with differential equationsNotes · 10 questions
  2. 7.2Verifying solutionsNotes · 10 questions
  3. 7.3Sketching slope fieldsNotes · 10 questions
  4. 7.4Reasoning with slope fieldsNotes · 10 questions
  5. 7.5Euler's methodNotes · 10 questions· BC only
  6. 7.6General solutions by separation of variablesNotes · 10 questions
  7. 7.7Particular solutions with initial conditionsNotes · 10 questions
  8. 7.8Exponential modelsNotes · 10 questions
  9. 7.9Logistic modelsNotes · 10 questions· BC only

All AP Calculus BC topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A differential equation tells you the slope at each point
  2. 2Each Euler step moves along the current slope
  3. 3The step size controls how often the slope is updated
  4. 4Worked steps produce an estimate of a solution value
  5. 5Concavity tells whether Euler estimates run low or high
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Euler steps below the exact solution

y00.20.40.60.811.211.522.533.5x
  • Exact solution
  • Euler step 1
  • Euler step 2
  • (0.5, 1.5)
  • Estimate 2.5
  • Exact 3.437