Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›3 Properties of Substances and Mixtures
  4. ›3.10 Solubility

AP Chemistry · Unit 3 · Properties of Substances and Mixtures

3.10 Solubility

Define solubility, predict how conditions affect it, and distinguish three solution states.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Solubility describes an equilibrium limit under stated conditions
  1. 1Solubility describes an equilibrium limit under stated conditions
  2. 2Solute and solvent interactions shape solubility trends
  3. 3Temperature and pressure affect different solutes differently
  4. 4Dissolved amount determines the solution state
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Solubility describes an equilibrium limit under stated conditions

Solubility is the maximum amount of solute that dissolves in a given amount of solvent at a stated temperature. For gases, pressure must also be stated. Dissolving and crystallizing can both continue after this limit is reached. At equilibrium, they occur at equal rates, so the dissolved amount stays constant.

Solubility depends on the solute, solvent, temperature, and sometimes pressure. A substance dissolves more readily when its interactions with the solvent favor mixing. Miscible liquids mix in all proportions under the stated conditions. Liquids with limited mutual solubility may separate into two layers.

Common mistake

A faster dissolving rate does not necessarily mean greater solubility. Stirring and crushing often change the rate without changing the equilibrium limit.

Key terms · tap one for its definition

Solubility

Solubility is the equilibrium maximum amount of solute that dissolves in a given amount of solvent under stated conditions.

Miscible

Miscible liquids mix with each other in all proportions under the stated conditions.

Part 1 done

2

Part 2 of 4: Solute and solvent interactions shape solubility trends

Dissolving requires separating some solute particles and making room among solvent particles. New solute–solvent attractions form as the particles mix. Polarity helps predict which attractions can form. Polar and ionic solutes often dissolve well in polar solvents. Nonpolar solutes often dissolve better in nonpolar solvents. These are useful trends, not guarantees.

Hydration occurs when water molecules surround dissolved particles. Water’s partially negative oxygen ends face positive ions. Its partially positive hydrogen ends face negative ions. However, not every ionic solid is highly soluble in water. Breaking apart its crystal can require more energy than hydration provides, and entropy also affects the outcome.

Exam tip

For a prediction, name both the solute’s character and the solvent’s character. Then connect their likely interactions to the trend.

Key terms · tap one for its definition

Polarity

Polarity is an uneven distribution of electrical charge within a bond or molecule.

Hydration

Hydration is the surrounding of dissolved particles by water molecules.

Part 2 done

Quick check

One question on the part you just read

Easy

Which solute is expected to dissolve most readily in a nonpolar solvent, based on the general relationship between polarity and solubility?
Show answer and explanation

Answer: A · Worked explanation

Nonpolar solutes often dissolve better in nonpolar solvents because the interactions between solute and solvent particles favor mixing. An ionic or highly polar solute is generally better matched to a polar solvent, although these trends are not guarantees for every substance.
3

Part 3 of 4: Temperature and pressure affect different solutes differently

The solubility of many solids in liquids increases as temperature rises. Some solids behave differently, so check the particular substance when data are available. Liquid solubility also varies by substance. Heating may increase or decrease how much of one liquid dissolves in another. Pressure usually has little effect on the solubility of solids and liquids.

For most gases, solubility in liquids decreases as temperature rises. Gas particles more readily leave a warmer liquid. At constant temperature, Henry’s law says dissolved gas concentration is proportional to the gas’s partial pressure above the liquid. Increasing that pressure increases gas solubility. When a sealed carbonated drink opens, pressure falls and dissolved carbon dioxide can escape.

Common mistake

Do not apply the pressure trend for gases to dissolved solids. Pressure has little effect on solid solubility under ordinary conditions.

Key term

Henry’s law

At constant temperature, dissolved gas concentration is proportional to that gas’s partial pressure above the liquid.

Part 3 done

4

Part 4 of 4: Dissolved amount determines the solution state

An unsaturated solution contains less dissolved solute than its solubility limit. More solute can dissolve under the same conditions. A saturated solution contains the equilibrium maximum. Added solute remains undissolved if conditions stay unchanged. Dissolved solute and excess solid can exchange particles while the dissolved amount stays constant.

A supersaturated solution contains more dissolved solute than the equilibrium limit at its current conditions. It can form when a hot saturated solution cools without crystals forming. It is unstable relative to a saturated solution. A seed crystal or disturbance may trigger crystallization of the excess solute.

Exam tip

Compare the dissolved amount with the solubility limit at the same temperature. For gases, keep the pressure the same too.

Key terms · tap one for its definition

Unsaturated solution

An unsaturated solution contains less dissolved solute than its equilibrium solubility limit under the stated conditions.

Saturated solution

A saturated solution contains the equilibrium maximum amount of dissolved solute under the stated conditions.

Supersaturated solution

A supersaturated solution contains more dissolved solute than the equilibrium limit under its current conditions.

Note read

Check your recall[13 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Define[3 marks]

    State what solubility means and name two conditions needed to report gas solubility.

    Show mark schemeHide mark scheme

    Model answer

    Solubility is the equilibrium maximum amount of solute dissolved in a given amount of solvent. Gas solubility must be reported at a stated temperature and pressure.

    • 1 mark for identifying the equilibrium maximum dissolved amount for a given amount of solvent
    • 1 mark for naming temperature as a required condition
    • 1 mark for naming pressure as a required condition
  2. 2.Explain[3 marks]

    Explain why an ionic solid may dissolve in water, but not every ionic solid is highly soluble.

    Show mark schemeHide mark scheme

    Model answer

    Water molecules surround ions, with oppositely charged ends facing each ion. These attractions favor dissolving. However, separating ions from the crystal also requires energy, so strong hydration alone does not guarantee high solubility.

    • 1 mark for describing water molecules surrounding dissolved ions
    • 1 mark for explaining that attractions between water and ions favor dissolving
    • 1 mark for recognizing that separating ions from the crystal can oppose dissolving
  3. 3.Predict[2 marks]

    Predict how heating and increasing gas pressure usually affect a gas dissolved in water.

    Show mark schemeHide mark scheme

    Model answer

    Heating usually decreases gas solubility. Increasing the gas’s partial pressure above the water increases its solubility at constant temperature.

    • 1 mark for predicting decreased gas solubility when temperature rises
    • 1 mark for predicting increased gas solubility when its partial pressure rises at constant temperature
  4. 4.Compare[3 marks]

    Compare unsaturated, saturated, and supersaturated solutions at the same conditions.

    Show mark schemeHide mark scheme

    Model answer

    An unsaturated solution contains less dissolved solute than the equilibrium limit. A saturated solution contains that limit. A supersaturated solution contains more than the limit and may crystallize when disturbed.

    • 1 mark for placing an unsaturated solution below the equilibrium solubility limit
    • 1 mark for placing a saturated solution at the equilibrium solubility limit
    • 1 mark for placing a supersaturated solution above the limit and recognizing its tendency to crystallize
  5. 5.Explain[2 marks]

    Explain why stirring can speed dissolving without increasing solubility.

    Show mark schemeHide mark scheme

    Model answer

    Stirring brings fresh solvent into contact with the solute, increasing the dissolving rate. It does not change the equilibrium amount that dissolves under the same conditions.

    • 1 mark for explaining that stirring increases contact between solute and fresh solvent
    • 1 mark for distinguishing dissolving rate from the equilibrium solubility limit

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

Two liquids mix in all proportions under the same conditions. Which term describes this behavior?
Show answer and explanation

Answer: B · Worked explanation

Liquids that mix with each other in all proportions under stated conditions are miscible. Saturated and supersaturated describe the amount of dissolved solute relative to a solubility limit, while hydration describes water molecules surrounding dissolved particles.
3.

Easy·Determine[1 mark]

At a fixed temperature, a solution contains 12 g12\,\text{g}12g of dissolved solute, while its solubility limit is 20 g20\,\text{g}20g per the same amount of solvent. How should the solution be classified?
Show answer and explanation

Answer: C · Worked explanation

The dissolved amount, 12 g12\,\text{g}12g, is below the 20 g20\,\text{g}20g solubility limit, so more solute can dissolve under these conditions; the solution is unsaturated. A saturated solution would contain the equilibrium maximum, and a supersaturated solution would contain more than that maximum.
4.

Easy·Identify[1 mark]

Which change would usually have the smallest effect on the solubility of a solid in a liquid under ordinary conditions?
Show answer and explanation

Answer: D · Worked explanation

Pressure usually has little effect on the solubility of solids in liquids under ordinary conditions. Temperature, solvent identity, and solute identity can affect the equilibrium amount that dissolves, so increasing pressure is the best choice for the smallest expected effect.
5.

Medium·Deduce[2 marks]

A solid has a solubility of 18 g18\,\text{g}18g per 100 g100\,\text{g}100g of water at 20∘C20^\circ\text{C}20∘C and 31 g31\,\text{g}31g per 100 g100\,\text{g}100g of water at 60∘C60^\circ\text{C}60∘C. A sample contains 25 g25\,\text{g}25g of the solid in 100 g100\,\text{g}100g of water. What happens to the solution as it is heated from 20∘C20^\circ\text{C}20∘C to 60∘C60^\circ\text{C}60∘C, assuming all the solid dissolves at the higher temperature?
Show answer and explanation

Answer: D · Worked explanation

At 20∘C20^\circ\text{C}20∘C, only 18 g18\,\text{g}18g can dissolve, so the solution is saturated and 7 g7\,\text{g}7g remains undissolved. At 60∘C60^\circ\text{C}60∘C, the limit is 31 g31\,\text{g}31g, greater than the sample's 25 g25\,\text{g}25g, so all can dissolve and the solution is unsaturated. The solubility limit rises with temperature for this solid.
6.

Medium·Calculate[2 marks]

At constant temperature, a gas has a dissolved concentration of 0.40 mol/L0.40\,\text{mol/L}0.40mol/L when its partial pressure is 2.0 atm2.0\,\text{atm}2.0atm. According to Henry’s law, what concentration is expected when its partial pressure is raised to 5.0 atm5.0\,\text{atm}5.0atm?
Show answer and explanation

Answer: C · Worked explanation

At constant temperature, Henry’s law makes dissolved concentration proportional to partial pressure. The pressure increases by a factor of 5.0/2.0=2.55.0/2.0=2.55.0/2.0=2.5, so the concentration becomes 0.40 mol/L×2.5=1.0 mol/L0.40\,\text{mol/L}\times2.5=1.0\,\text{mol/L}0.40mol/L×2.5=1.0mol/L. The tempting value 0.16 mol/L0.16\,\text{mol/L}0.16mol/L results from using the pressure ratio in the inverse direction.
7.

Medium·Predict[2 marks]

A sealed container holds water and a dissolved gas. The temperature is raised while the gas’s partial pressure above the water is held constant. What change is generally expected for the dissolved gas?
Show answer and explanation

Answer: C · Worked explanation

For most gases, solubility in a liquid decreases as temperature rises because gas particles more readily escape from the warmer liquid. Holding partial pressure constant removes the pressure change as an explanation. Faster particle motion does not mean that more gas remains dissolved at equilibrium.
8.

Medium·Determine[2 marks]

A liquid solute has a solubility limit of 8 mL8\,\text{mL}8mL per 100 mL100\,\text{mL}100mL of a particular solvent at a stated temperature. A mixture contains 5 mL5\,\text{mL}5mL of that solute and is uniform. What is the best conclusion?
Show answer and explanation

Answer: A · Worked explanation

The mixture contains 5 mL5\,\text{mL}5mL of solute, below the 8 mL8\,\text{mL}8mL limit, leaving capacity for 8−5=3 mL8-5=3\,\text{mL}8−5=3mL more under the stated conditions. A uniform mixture can still be unsaturated; uniform appearance alone does not show that the solubility limit has been reached.
9.

Hard·Deduce[2 marks]

At 70∘C70^\circ\text{C}70∘C, a solution contains 48 g48\,\text{g}48g of dissolved solute, equal to its solubility limit. It is cooled to 25∘C25^\circ\text{C}25∘C, where the limit is 30 g30\,\text{g}30g, without crystals forming. What is the solution’s state immediately after cooling, and what is the most likely result of adding a seed crystal?
Show answer and explanation

Answer: B · Worked explanation

After cooling, 48 g48\,\text{g}48g remains dissolved even though the new limit is 30 g30\,\text{g}30g, so the solution is supersaturated. A seed crystal can trigger crystallization of the excess, approximately 48−30=18 g48-30=18\,\text{g}48−30=18g. The 30 g30\,\text{g}30g value is the amount that remains dissolved at saturation, not the amount in excess.
10.

Hard·Explain[2 marks]

A student argues that raising the pressure above a solution must greatly increase the solubility of any solute because pressure increases gas solubility. Which response best evaluates the claim for a solution containing a dissolved solid?
Show answer and explanation

Answer: D · Worked explanation

The pressure trend in Henry’s law applies to gases dissolved in liquids: at constant temperature, higher gas partial pressure increases dissolved gas concentration. It should not be generalized to a dissolved solid, whose solubility is usually little affected by pressure under ordinary conditions. The tempting idea that pressure affects all solutes alike overlooks this distinction.

Keep going

Next topic3.11 Spectroscopy and the electromagnetic spectrumPrevious topic3.9 Separation of solutions and mixtures

More in Unit 3 · Properties of Substances and Mixtures

  1. 3.5Kinetic molecular theoryNotes · 10 questions
  2. 3.6Deviation from ideal gas lawNotes · 10 questions
  3. 3.7Solutions and mixturesNotes · 10 questions
  4. 3.8Representations of solutionsNotes · 10 questions
  5. 3.9Separation of solutions and mixturesNotes · 10 questions
  6. 3.10SolubilityNotes · 10 questions
  7. 3.11Spectroscopy and the electromagnetic spectrumNotes · 10 questions
  8. 3.12Properties of photonsNotes · 10 questions
  9. 3.13Beer-Lambert lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Solubility describes an equilibrium limit under stated conditions
  2. 2Solute and solvent interactions shape solubility trends
  3. 3Temperature and pressure affect different solutes differently
  4. 4Dissolved amount determines the solution state
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe