Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›3 Properties of Substances and Mixtures
  4. ›3.13 Beer-Lambert law

AP Chemistry · Unit 3 · Properties of Substances and Mixtures

3.13 Beer-Lambert law

State the Beer-Lambert law, calculate concentration from absorbance, and explain the effects of concentration and path length.

  • 3 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5A darker solution absorbs more light
  1. 1A darker solution absorbs more light
  2. 2Beer-Lambert law connects absorbance to concentration
  3. 3A longer path also increases absorbance
  4. 4Rearranging the law gives an unknown concentration
  5. 5Reliable comparisons require matching measurement conditions
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: A darker solution absorbs more light

Imagine shining a light through two samples of the same colored solution. One contains more dissolved dye. Less light passes through that sample because more light is absorbed.

An instrument reports absorbance, a measure of how much light a sample absorbs. The light entering the sample is compared with the light leaving it. Absorbance has no units. For a useful comparison, measure both samples at the same wavelength.

Common mistake

A darker sample does not transmit more light. It generally transmits less light and has higher absorbance.

Key term

absorbance

A unitless quantity defined by A=log⁡10(I0/I)A=\log_{10}(I_0/I)A=log10​(I0​/I), where I0I_0I0​ and III are incident and transmitted light intensities.

Part 1 done

2

Part 2 of 5: Beer-Lambert law connects absorbance to concentration

Now keep the container and light source unchanged while adding more dye. The absorbance rises as the concentration rises. Beer-Lambert law expresses this relationship as A=εbcA=\varepsilon bcA=εbc.

Here, AAA is absorbance, bbb is the distance light travels through the sample, and ccc is concentration. The molar absorptivity, ε\varepsilonε, describes how strongly a substance absorbs at the chosen wavelength. It depends on the substance and wavelength.

If bbb and ε\varepsilonε stay constant, doubling ccc doubles AAA. This direct relationship makes absorbance useful for finding an unknown concentration.

Key terms · tap one for its definition

concentration

The amount of dissolved substance per unit volume; molar concentration is commonly expressed in mol L−1\mathrm{mol\,L^{-1}}molL−1.

molar absorptivity

The proportionality constant ε\varepsilonε for a substance at a specified wavelength, commonly measured in L mol−1 cm−1\mathrm{L\,mol^{-1}\,cm^{-1}}Lmol−1cm−1.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the quantity represented by bbb in the Beer-Lambert equation A=εbcA=\varepsilon bcA=εbc.
Show answer and explanation

Answer: C · Worked explanation

In A=εbcA=\varepsilon bcA=εbc, bbb represents the path length: the distance that light travels through the sample. The fraction of incident light absorbed is not represented by bbb; absorbance is instead a unitless logarithmic measure based on transmitted light.
3

Part 3 of 5: A longer path also increases absorbance

The same solution can look darker in a wider container. Light passes through more solution, so it has more opportunity to be absorbed. This distance is the path length, bbb.

At fixed concentration and wavelength, doubling the path length doubles absorbance. A graph of absorbance against concentration therefore forms a straight line when path length stays fixed. Its slope is εb\varepsilon bεb, and the ideal line passes through the origin.

Figure 1. At a fixed path length and wavelength, absorbance increases in direct proportion to concentration.

Exam tip

When comparing absorbances, state which quantity stays constant. Concentration and path length can both change the result.

Key term

path length

The distance light travels through the sample, commonly measured in centimeters.

Part 3 done

4

Part 4 of 5: Rearranging the law gives an unknown concentration

Suppose you measure an unknown sample in a container with a known path length. If you also know its molar absorptivity, rearrange the law to c=Aεbc=\frac{A}{\varepsilon b}c=εbA​. Use compatible units throughout.

Worked example

Calculate a sample concentration

A sample has an absorbance of 0.600. Its molar absorptivity is 150 L mol−1 cm−1150\ \mathrm{L\,mol^{-1}\,cm^{-1}}150 Lmol−1cm−1, and its path length is 2.00 cm. Find its concentration.
  1. 1
    Start with c=Aεbc=\frac{A}{\varepsilon b}c=εbA​.
  2. 2
    Substitute: c=0.600(150 L mol−1 cm−1)(2.00 cm)c=\frac{0.600}{(150\ \mathrm{L\,mol^{-1}\,cm^{-1}})(2.00\ \mathrm{cm})}c=(150 Lmol−1cm−1)(2.00 cm)0.600​.
  3. 3
    Calculate: c=0.600300 L mol−1=0.00200 mol L−1c=\frac{0.600}{300\ \mathrm{L\,mol^{-1}}}=0.00200\ \mathrm{mol\,L^{-1}}c=300 Lmol−10.600​=0.00200 molL−1.

Answer: The concentration is 2.00×10−3 mol L−12.00\times10^{-3}\ \mathrm{mol\,L^{-1}}2.00×10−3 molL−1.

The centimeter units cancel. Dividing by liters per mole leaves moles per liter, the expected concentration unit.

Part 4 done

Quick check

One question on the part you just read

Easy

State the units of molar absorptivity when concentration is measured in mol L−1\mathrm{mol\,L^{-1}}molL−1 and path length in cm\mathrm{cm}cm.
Show answer and explanation

Answer: D · Worked explanation

Molar absorptivity has units of L mol−1 cm−1\mathrm{L\,mol^{-1}\,cm^{-1}}Lmol−1cm−1 for these concentration and path-length units. In A=εbcA=\varepsilon bcA=εbc, those units cancel with cm\mathrm{cm}cm and mol L−1\mathrm{mol\,L^{-1}}molL−1, leaving absorbance unitless.
5

Part 5 of 5: Reliable comparisons require matching measurement conditions

The calculation works only if the absorptivity matches the substance and wavelength measured. Keep the path length known, and use the same wavelength when comparing samples. Otherwise, a change in absorbance may not reflect a change in concentration.

A calibration curve offers another way to find concentration. Measure solutions of known concentration under matching conditions, then plot their absorbances. Use the unknown sample’s absorbance to read its concentration from the line.

Beer-Lambert law describes the straight-line relationship under suitable conditions. If measured points depart from that line, do not assume the simple proportional relationship still applies.

Key term

calibration curve

A plot of measured responses against known concentrations, used to determine an unknown concentration under matching conditions.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.State[4 marks]

    State Beer-Lambert law in mathematical form and identify each symbol.

    Show mark schemeHide mark scheme

    Model answer

    Beer-Lambert law is A=εbcA=\varepsilon bcA=εbc, where AAA is absorbance, ε\varepsilonε is molar absorptivity, bbb is path length, and ccc is concentration.

    • 1 mark for writing A=εbcA=\varepsilon bcA=εbc
    • 1 mark for identifying AAA as absorbance
    • 1 mark for identifying ε\varepsilonε as molar absorptivity
    • 1 mark for identifying bbb as path length and ccc as concentration
  2. 2.Predict[2 marks]

    Predict what happens to absorbance when concentration triples at fixed path length and wavelength.

    Show mark schemeHide mark scheme

    Model answer

    Absorbance triples because it is directly proportional to concentration when path length and molar absorptivity stay constant.

    • 1 mark for predicting that absorbance triples
    • 1 mark for linking the change to direct proportionality at constant path length and wavelength
  3. 3.Explain[2 marks]

    Explain why a wider container can give a higher absorbance for the same solution.

    Show mark schemeHide mark scheme

    Model answer

    A wider container can give light a longer path through the solution. Absorbance increases with path length when concentration and wavelength stay constant.

    • 1 mark for stating that light travels through more solution
    • 1 mark for explaining that absorbance increases with path length at fixed concentration and wavelength
  4. 4.Calculate[3 marks]

    Calculate the concentration when A=0.450A=0.450A=0.450, ε=150 L mol−1 cm−1\varepsilon=150\ \mathrm{L\,mol^{-1}\,cm^{-1}}ε=150 Lmol−1cm−1, and b=1.50 cmb=1.50\ \mathrm{cm}b=1.50 cm.

    Show mark schemeHide mark scheme

    Model answer

    c=Aεb=0.450(150)(1.50)=2.00×10−3 mol L−1c=\frac{A}{\varepsilon b}=\frac{0.450}{(150)(1.50)}=2.00\times10^{-3}\ \mathrm{mol\,L^{-1}}c=εbA​=(150)(1.50)0.450​=2.00×10−3 molL−1.

    • 1 mark for rearranging the law to c=A/(εb)c=A/(\varepsilon b)c=A/(εb)
    • 1 mark for substituting the given values correctly
    • 1 mark for obtaining 2.00×10−3 mol L−12.00\times10^{-3}\ \mathrm{mol\,L^{-1}}2.00×10−3 molL−1
  5. 5.Describe[3 marks]

    Describe how a calibration curve can give an unknown concentration.

    Show mark schemeHide mark scheme

    Model answer

    Measure absorbance for solutions with known concentrations at the same wavelength and path length. Plot absorbance against concentration, then use the unknown absorbance to read its concentration from the line.

    • 1 mark for measuring absorbances of solutions with known concentrations
    • 1 mark for keeping wavelength and path length the same
    • 1 mark for using the unknown absorbance to read concentration from the plotted line

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy·Identify[1 mark]

At a fixed wavelength and under the same conditions, which quantity in A=εbcA=\varepsilon bcA=εbc depends on the absorbing substance?
Show answer and explanation

Answer: D · Worked explanation

Molar absorptivity, ε\varepsilonε, depends on the absorbing substance and the wavelength used. Path length and concentration describe the sample setup, while absorbance is the measured outcome of their combination in the Beer-Lambert law.
4.

Easy·Identify[1 mark]

At one wavelength and fixed path length, what relationship between absorbance and concentration is expected within the Beer-Lambert law’s working range?
Show answer and explanation

Answer: D · Worked explanation

When wavelength and path length are fixed, molar absorptivity and bbb are constant, so A=εbcA=\varepsilon bcA=εbc makes absorbance directly proportional to concentration. Inverse proportionality would predict that adding absorbing particles lowers absorbance, contrary to the law.
5.

Medium·Calculate[2 marks]

A solution has absorbance 0.72 at a wavelength where ε=180 L mol−1 cm−1\varepsilon=180\ \mathrm{L\,mol^{-1}\,cm^{-1}}ε=180 Lmol−1cm−1. If the light travels through 2.0 cm2.0\ \mathrm{cm}2.0 cm of solution, calculate the concentration.
Show answer and explanation

Answer: D · Worked explanation

Rearrange A=εbcA=\varepsilon bcA=εbc to c=A/(εb)c=A/(\varepsilon b)c=A/(εb). Substitution gives c=0.72/[(180 L mol−1 cm−1)(2.0 cm)]=0.0020 mol L−1c=0.72/[(180\ \mathrm{L\,mol^{-1}\,cm^{-1}})(2.0\ \mathrm{cm})]=0.0020\ \mathrm{mol\,L^{-1}}c=0.72/[(180 Lmol−1cm−1)(2.0 cm)]=0.0020 molL−1. The tempting value 8.0×10−3 mol L−18.0\times10^{-3}\ \mathrm{mol\,L^{-1}}8.0×10−3 molL−1 results from an incorrect rearrangement or arithmetic.
6.

Medium·Determine[2 marks]

At a fixed wavelength, a sample has absorbance 0.54 in a cell with path length 1.5 cm1.5\ \mathrm{cm}1.5 cm. The molar absorptivity is 90 L mol−1 cm−190\ \mathrm{L\,mol^{-1}\,cm^{-1}}90 Lmol−1cm−1. Determine the sample concentration.
Show answer and explanation

Answer: D · Worked explanation

Using c=A/(εb)c=A/(\varepsilon b)c=A/(εb) gives c=0.54/[(90 L mol−1 cm−1)(1.5 cm)]=4.0×10−3 mol L−1c=0.54/[(90\ \mathrm{L\,mol^{-1}\,cm^{-1}})(1.5\ \mathrm{cm})]=4.0\times10^{-3}\ \mathrm{mol\,L^{-1}}c=0.54/[(90 Lmol−1cm−1)(1.5 cm)]=4.0×10−3 molL−1.
7.

Medium·Determine[1 mark]

A solution has absorbance 0.30 in a 1.0 cm1.0\ \mathrm{cm}1.0 cm cell. At the same wavelength, the same solution is measured in a 2.5 cm2.5\ \mathrm{cm}2.5 cm cell. Assume both measurements are in the linear range. Determine the new absorbance.
Show answer and explanation

Answer: A · Worked explanation

At constant concentration and wavelength, absorbance is proportional to path length. Increasing the path length by a factor of 2.5 increases absorbance from 0.30 to 0.30×2.5=0.750.30\times2.5=0.750.30×2.5=0.75. The value 0.12 would instead correspond to dividing the absorbance by the path-length factor.
8.

Medium·Calculate[2 marks]

A solution has concentration 3.0×10−3 mol L−13.0\times10^{-3}\ \mathrm{mol\,L^{-1}}3.0×10−3 molL−1 and is measured using a 1.2 cm1.2\ \mathrm{cm}1.2 cm path length. If ε=250 L mol−1 cm−1\varepsilon=250\ \mathrm{L\,mol^{-1}\,cm^{-1}}ε=250 Lmol−1cm−1, calculate its absorbance.
Show answer and explanation

Answer: B · Worked explanation

Substitute into A=εbcA=\varepsilon bcA=εbc: A=(250 L mol−1 cm−1)(1.2 cm)(3.0×10−3 mol L−1)=0.90A=(250\ \mathrm{L\,mol^{-1}\,cm^{-1}})(1.2\ \mathrm{cm})(3.0\times10^{-3}\ \mathrm{mol\,L^{-1}})=0.90A=(250 Lmol−1cm−1)(1.2 cm)(3.0×10−3 molL−1)=0.90. The very small value 8.3×10−68.3\times10^{-6}8.3×10−6 reflects treating the factors as though they should be divided rather than multiplied.
9.

Medium·Compare[2 marks]

Two samples of the same absorbing substance are measured at the same wavelength. Sample X has twice the concentration of sample Y, while its path length is half as large. How do their absorbances compare, assuming both are in the linear range?
Show answer and explanation

Answer: C · Worked explanation

For the same substance at the same wavelength, ε\varepsilonε is unchanged, and absorbance depends on the product bcbcbc. Sample X has twice the concentration but half the path length, so its bcbcbc product is unchanged and its absorbance equals that of sample Y. Comparing concentration alone would incorrectly predict a doubled absorbance.
10.

Hard·Deduce[2 marks]

A solution gives absorbance 0.40 at concentration ccc and path length bbb. It is then diluted so its concentration becomes 0.60c0.60c0.60c and measured in a cell with path length 1.5b1.5b1.5b, at the same wavelength. Deduce the new absorbance, assuming the law remains linear.
Show answer and explanation

Answer: D · Worked explanation

Because wavelength and substance are unchanged, the new-to-old absorbance ratio is (0.60c)(1.5b)/(cb)=0.90(0.60c)(1.5b)/(cb)=0.90(0.60c)(1.5b)/(cb)=0.90. The new absorbance is therefore 0.40×0.90=0.360.40\times0.90=0.360.40×0.90=0.36. The value 0.60 accounts for the increase in path length but ignores the dilution.

Keep going

Next topic4.1 Introduction for reactionsPrevious topic3.12 Properties of photons

More in Unit 3 · Properties of Substances and Mixtures

  1. 3.5Kinetic molecular theoryNotes · 10 questions
  2. 3.6Deviation from ideal gas lawNotes · 10 questions
  3. 3.7Solutions and mixturesNotes · 10 questions
  4. 3.8Representations of solutionsNotes · 10 questions
  5. 3.9Separation of solutions and mixturesNotes · 10 questions
  6. 3.10SolubilityNotes · 10 questions
  7. 3.11Spectroscopy and the electromagnetic spectrumNotes · 10 questions
  8. 3.12Properties of photonsNotes · 10 questions
  9. 3.13Beer-Lambert lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1A darker solution absorbs more light
  2. 2Beer-Lambert law connects absorbance to concentration
  3. 3A longer path also increases absorbance
  4. 4Rearranging the law gives an unknown concentration
  5. 5Reliable comparisons require matching measurement conditions
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe

Absorbance and concentration

Absorbance (unitless)00.0010.0020.0030.00400.20.40.60.8Concentration (mol L⁻¹)
  • Fixed path length and wavelength