Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›9 Thermodynamics and Electrochemistry
  4. ›9.11 Electrolysis and Faraday's law

AP Chemistry · Unit 9 · Thermodynamics and Electrochemistry

9.11 Electrolysis and Faraday's law

Describe electrolysis and calculate the substance changed or charge required using Faraday's law.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4An external power source drives electrolysis
  1. 1An external power source drives electrolysis
  2. 2Electrode reactions determine what electrolysis produces
  3. 3Electron flow links charge to chemical amount
  4. 4A balanced half-reaction guides each calculation
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: An external power source drives electrolysis

Electrolysis uses electrical energy to drive a reaction that would not proceed on its own. An electrolytic cell contains an electrolyte and two electrodes connected to a power source. The power source pulls electrons from the anode and supplies electrons to the cathode.

Oxidation occurs at the anode, while reduction occurs at the cathode. In an electrolytic cell, the anode is positive and the cathode is negative. Positive ions move toward the cathode. Negative ions move toward the anode. The electrolyte carries charge through moving ions, not through moving electrons.

Common mistake

The cathode is not always positive. Reduction defines the cathode; its sign depends on the cell type.

Key terms · tap one for its definition

Electrolysis

Electrolysis uses electrical energy to drive a chemical reaction that would not proceed on its own.

electrolytic cell

An electrolytic cell uses an external power source to drive oxidation and reduction at separate electrodes.

Part 1 done

2

Part 2 of 4: Electrode reactions determine what electrolysis produces

At each electrode, write a balanced half-reaction to identify the chemical change. For copper plating from a copper(II) ion solution, copper ions gain electrons at the object being plated: Cu2++2e−→Cu(s)\mathrm{Cu^{2+}+2e^-\rightarrow Cu(s)}Cu2++2e−→Cu(s). A copper anode can replace those ions as it dissolves: Cu(s)→Cu2++2e−\mathrm{Cu(s)\rightarrow Cu^{2+}+2e^-}Cu(s)→Cu2++2e−.

Figure 1. Copper leaves the positive anode and deposits on the negative object. Copper ions carry charge through the solution.

Electroplating coats an object with a thin metal layer. Electrolysis also extracts reactive metals from molten compounds and refines metals. Products depend on the electrolyte and electrodes. In an aqueous solution, water may react instead of a dissolved ion.

Exam tip

Balance the electrode half-reaction before calculating. Its electron coefficient sets the charge needed per mole of product.

Key terms · tap one for its definition

half-reaction

A half-reaction shows either oxidation or reduction, including the electrons transferred.

Electroplating

Electroplating deposits a metal coating onto an object by reducing metal ions at its surface.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the main purpose of electrolysis.
Show answer and explanation

Answer: C · Worked explanation

Electrolysis uses an external power source to drive a chemical reaction that would not proceed on its own. The option about converting chemical energy into electrical energy describes a galvanic cell, rather than the purpose of an electrolytic cell.
3

Part 3 of 4: Electron flow links charge to chemical amount

Faraday's constant, FFF, is the charge carried by one mole of electrons. Use F=96,485 C mol−1F=96{,}485\ \mathrm{C\,mol^{-1}}F=96,485 Cmol−1 of electrons. If the total charge is QQQ, the amount of electrons transferred is n(e−)=Q/Fn(e^-)=Q/Fn(e−)=Q/F. For constant current III over time ttt, calculate charge using Q=ItQ=ItQ=It. Use amperes and seconds to obtain coulombs.

Let zzz be the electron coefficient for one mole of product in the balanced half-reaction. The amount of product is n(product)=Q/(zF)n(\text{product})=Q/(zF)n(product)=Q/(zF). To find a required charge, rearrange to Q=n(product)zFQ=n(\text{product})zFQ=n(product)zF. If a mass is requested, convert moles using molar mass. These relationships assume all the measured charge causes the stated reaction.

Key terms · tap one for its definition

Faraday's constant

Faraday's constant is the charge carried by one mole of electrons, approximately 96,485 C mol−196{,}485\ \mathrm{C\,mol^{-1}}96,485 Cmol−1.

charge

Charge is the quantity of electricity transferred, measured in coulombs.

Part 3 done

4

Part 4 of 4: A balanced half-reaction guides each calculation

Start with the substance named in the question. Convert its mass to moles if needed. Then use the electron coefficient to move between moles of substance and moles of electrons. Convert between electron moles and charge using FFF. For a charge given as current and time, find QQQ first.

Worked example

Charge required to plate copper

What charge deposits 0.6355 g of copper from Cu2+\mathrm{Cu^{2+}}Cu2+? Use a copper molar mass of 63.55 g mol−163.55\ \mathrm{g\,mol^{-1}}63.55 gmol−1.
  1. 1
    Write the reduction: Cu2++2e−→Cu(s)\mathrm{Cu^{2+}+2e^-\rightarrow Cu(s)}Cu2++2e−→Cu(s).
  2. 2
    Find copper amount: n(Cu)=0.6355/63.55=0.01000 moln(\mathrm{Cu})=0.6355/63.55=0.01000\ \mathrm{mol}n(Cu)=0.6355/63.55=0.01000 mol.
  3. 3
    Find electron amount: n(e−)=2(0.01000)=0.02000 moln(e^-)=2(0.01000)=0.02000\ \mathrm{mol}n(e−)=2(0.01000)=0.02000 mol.
  4. 4
    Find charge: Q=(0.02000)(96,485)=1,929.7 CQ=(0.02000)(96{,}485)=1{,}929.7\ \mathrm{C}Q=(0.02000)(96,485)=1,929.7 C.

Answer: The required charge is 1.930×103 C1.930\times10^3\ \mathrm{C}1.930×103 C, assuming all charge deposits copper.

For a given charge, reverse these steps. Divide charge by FFF, then divide by the electron coefficient. Multiply the resulting moles by molar mass if the answer needs grams.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how an external power source drives electrolysis in an electrolytic cell.

    Show mark schemeHide mark scheme

    Model answer

    The power source removes electrons from the anode and supplies them to the cathode. Oxidation occurs at the anode, and reduction occurs at the cathode.

    • 1 mark for stating that the power source removes electrons from the anode
    • 1 mark for stating that the power source supplies electrons to the cathode
    • 1 mark for identifying oxidation at the anode and reduction at the cathode
  2. 2.Explain[3 marks]

    Explain how a copper anode can support copper electroplating.

    Show mark schemeHide mark scheme

    Model answer

    Copper atoms oxidize at the anode to form copper(II) ions. These ions can move through the solution toward the object. They gain electrons at the cathode and deposit as copper metal.

    • 1 mark for stating that copper oxidizes at the anode to form copper(II) ions
    • 1 mark for stating that copper(II) ions move through the solution toward the object
    • 1 mark for stating that copper(II) ions gain electrons and deposit at the cathode
  3. 3.Calculate[3 marks]

    Calculate the mass of copper deposited by 965 C965\ \mathrm{C}965 C of charge. Use F=96,485 C mol−1F=96{,}485\ \mathrm{C\,mol^{-1}}F=96,485 Cmol−1 and a copper molar mass of 63.55 g mol−163.55\ \mathrm{g\,mol^{-1}}63.55 gmol−1. Assume all charge deposits copper.

    Show mark schemeHide mark scheme

    Model answer

    n(e−)=965/96,485=0.0100 moln(e^-)=965/96{,}485=0.0100\ \mathrm{mol}n(e−)=965/96,485=0.0100 mol. Since Cu2+\mathrm{Cu^{2+}}Cu2+ needs two electrons, n(Cu)=0.00500 moln(\mathrm{Cu})=0.00500\ \mathrm{mol}n(Cu)=0.00500 mol. The mass is (0.00500)(63.55)=0.318 g(0.00500)(63.55)=0.318\ \mathrm{g}(0.00500)(63.55)=0.318 g.

    • 1 mark for calculating electron amount as approximately 0.0100 mol0.0100\ \mathrm{mol}0.0100 mol
    • 1 mark for dividing electron amount by two to find copper amount
    • 1 mark for calculating a copper mass of approximately 0.318 g0.318\ \mathrm{g}0.318 g
  4. 4.Calculate[3 marks]

    Calculate the charge needed to produce 0.0200 mol0.0200\ \mathrm{mol}0.0200 mol of aluminum from Al3+\mathrm{Al^{3+}}Al3+. Use F=96,485 C mol−1F=96{,}485\ \mathrm{C\,mol^{-1}}F=96,485 Cmol−1.

    Show mark schemeHide mark scheme

    Model answer

    Al3++3e−→Al\mathrm{Al^{3+}+3e^-\rightarrow Al}Al3++3e−→Al. Producing 0.0200 mol0.0200\ \mathrm{mol}0.0200 mol of aluminum needs 0.0600 mol0.0600\ \mathrm{mol}0.0600 mol of electrons. The charge is (0.0600)(96,485)=5.79×103 C(0.0600)(96{,}485)=5.79\times10^3\ \mathrm{C}(0.0600)(96,485)=5.79×103 C.

    • 1 mark for identifying three electrons per aluminum ion reduced
    • 1 mark for calculating 0.0600 mol0.0600\ \mathrm{mol}0.0600 mol of electrons
    • 1 mark for calculating a charge of 5.79×103 C5.79\times10^3\ \mathrm{C}5.79×103 C
  5. 5.Explain[2 marks]

    Explain why a calculated product mass may exceed the mass actually collected during electrolysis.

    Show mark schemeHide mark scheme

    Model answer

    The calculation assumes all charge produces the stated substance. If another electrode reaction also uses charge, less of the desired substance forms.

    • 1 mark for identifying the assumption that all charge produces the stated substance
    • 1 mark for explaining that a competing reaction can reduce the amount formed

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·State[1 mark]

State the signs of the electrodes in an electrolytic cell.
Show answer and explanation

Answer: B · Worked explanation

In an electrolytic cell, the power source pulls electrons from the anode and supplies electrons to the cathode, making the anode positive and the cathode negative. The tempting reversal may come from confusing an electrolytic cell with the electrode signs in a galvanic cell.
3.

Easy·Identify[1 mark]

Identify the species that carries charge through the electrolyte during electrolysis.
Show answer and explanation

Answer: D · Worked explanation

Charge moves through the electrolyte by the movement of ions, while electrons move through the external circuit and electrodes. The option describing electrons in solution confuses charge transport in the electrolyte with charge transport in the wires.
4.

Easy·State[1 mark]

State what Faraday's constant represents.
Show answer and explanation

Answer: D · Worked explanation

Faraday's constant is approximately 96,485 C mol−196{,}485\,\text{C mol}^{-1}96,485C mol−1 of electrons, so it gives the charge carried by one mole of electrons. The charge per mole of product is not universal because it depends on the electron coefficient in that product's half-reaction.
5.

Medium·Calculate[2 marks]

A current of 2.00 A2.00\,\text{A}2.00A passes through an electrolytic cell for 300 s300\,\text{s}300s. Calculate the charge transferred.
Show answer and explanation

Answer: D · Worked explanation

Use Q=ItQ=ItQ=It: Q=(2.00 A)(300 s)=600 CQ=(2.00\,\text{A})(300\,\text{s})=600\,\text{C}Q=(2.00A)(300s)=600C. The tempting value of 150 C150\,\text{C}150C comes from dividing current by time, but charge is the product of current and time.
6.

Medium·Calculate[2 marks]

A reaction at an electrode is Ag++e−→Ag(s)\mathrm{Ag^+ + e^- \rightarrow Ag(s)}Ag++e−→Ag(s). Calculate the charge needed to produce 0.0150 mol0.0150\,\text{mol}0.0150mol of silver, assuming all charge produces silver. Use F=96,485 C mol−1F=96{,}485\,\text{C mol}^{-1}F=96,485C mol−1.
Show answer and explanation

Answer: C · Worked explanation

The half-reaction requires one mole of electrons per mole of silver, so Q=(0.0150 mol)(1)(96,485 C mol−1)=1.45×103 CQ=(0.0150\,\text{mol})(1)(96{,}485\,\text{C mol}^{-1})=1.45\times10^3\,\text{C}Q=(0.0150mol)(1)(96,485C mol−1)=1.45×103C. The tempting value 2.89×103 C2.89\times10^3\,\text{C}2.89×103C incorrectly uses two electrons per silver atom.
7.

Medium·Determine[2 marks]

A charge of 4.824×103 C4.824\times10^3\,\text{C}4.824×103C passes through a cell. Determine the amount of electrons transferred. Use F=96,485 C mol−1F=96{,}485\,\text{C mol}^{-1}F=96,485C mol−1.
Show answer and explanation

Answer: B · Worked explanation

The amount of electrons is n(e−)=Q/F=(4.824×103 C)/(96,485 C mol−1)=0.0500 moln(e^-)=Q/F=(4.824\times10^3\,\text{C})/(96{,}485\,\text{C mol}^{-1})=0.0500\,\text{mol}n(e−)=Q/F=(4.824×103C)/(96,485C mol−1)=0.0500mol. The option 0.0250 mol0.0250\,\text{mol}0.0250mol results from dividing by two without a reaction half-reaction that requires two electrons per product.
8.

Medium·Identify[2 marks]

An object is connected as the cathode in an electrolytic cell containing a metal-ion solution. Which change describes electroplating at the object?
Show answer and explanation

Answer: A · Worked explanation

The cathode is where reduction occurs, so metal ions gain electrons and deposit as metal on the object. The tempting option describing metal atoms losing electrons is an oxidation process, which is associated with an anode rather than metal deposition at the cathode.
9.

Medium·Calculate[2 marks]

A current of 1.50 A1.50\,\text{A}1.50A flows for 20.0 min20.0\,\text{min}20.0min through a cell where Cu2++2e−→Cu(s)\mathrm{Cu^{2+}+2e^-\rightarrow Cu(s)}Cu2++2e−→Cu(s). Calculate the amount of copper deposited, assuming all charge produces copper. Use F=96,485 C mol−1F=96{,}485\,\text{C mol}^{-1}F=96,485C mol−1.
Show answer and explanation

Answer: D · Worked explanation

Convert time to seconds and find Q=(1.50 A)(1200 s)=1800 CQ=(1.50\,\text{A})(1200\,\text{s})=1800\,\text{C}Q=(1.50A)(1200s)=1800C. Then n(e−)=1800/96,485=0.0187 moln(e^-)=1800/96{,}485=0.0187\,\text{mol}n(e−)=1800/96,485=0.0187mol, and the two-electron half-reaction gives n(Cu)=0.0187/2=0.00933 moln(\mathrm{Cu})=0.0187/2=0.00933\,\text{mol}n(Cu)=0.0187/2=0.00933mol. The tempting 0.0187 mol0.0187\,\text{mol}0.0187mol treats one electron as sufficient per copper atom.
10.

Hard·Deduce[2 marks]

During electrolysis of an aqueous solution, a metal coating forms more slowly than predicted from the measured charge. Deduce a plausible reason for the difference.
Show answer and explanation

Answer: D · Worked explanation

The predicted amount assumes that all measured charge produces the stated metal. In an aqueous solution, a competing reaction such as water reacting can consume some of the charge, leaving less available for metal deposition. The option that the electrolyte conducts through moving electrons is incorrect because ions carry charge through the electrolyte.

Keep going

Previous topic9.10 Cell potential under nonstandard conditions

More in Unit 9 · Thermodynamics and Electrochemistry

  1. 9.3Gibbs free energy and thermodynamic favorabilityNotes · 10 questions
  2. 9.4Thermodynamic and kinetic controlNotes · 9 questions
  3. 9.5Free energy and equilibriumNotes · 10 questions
  4. 9.6Free energy of dissolutionNotes · 10 questions
  5. 9.7Coupled reactionsNotes · 10 questions
  6. 9.8Galvanic and electrolytic cellsNotes · 10 questions
  7. 9.9Cell potential and free energyNotes · 10 questions
  8. 9.10Cell potential under nonstandard conditionsNotes · 10 questions
  9. 9.11Electrolysis and Faraday's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1An external power source drives electrolysis
  2. 2Electrode reactions determine what electrolysis produces
  3. 3Electron flow links charge to chemical amount
  4. 4A balanced half-reaction guides each calculation
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe