Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›9 Thermodynamics and Electrochemistry
  4. ›9.9 Cell potential and free energy

AP Chemistry · Unit 9 · Thermodynamics and Electrochemistry

9.9 Cell potential and free energy

Calculate standard cell potential and use it to determine spontaneity and Gibbs free energy change.

  • 2 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Reduction potentials identify the cathode and anode
  1. 1Reduction potentials identify the cathode and anode
  2. 2Subtract reduction potentials to find standard cell potential
  3. 3The sign of cell potential shows spontaneity
  4. 4Gibbs free energy change depends on transferred charge
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Reduction potentials identify the cathode and anode

A standard reduction potential measures a half-reaction’s tendency to gain electrons under standard conditions. A more positive value means a greater tendency to be reduced. In a spontaneous galvanic cell, reduction occurs at the cathode. Oxidation occurs at the anode, where electrons are released. Compare both listed reduction potentials before assigning these roles. For example, E∘(Cu2+/Cu)=+0.34 VE^\circ(\mathrm{Cu^{2+}/Cu})=+0.34\,\mathrm{V}E∘(Cu2+/Cu)=+0.34V and E∘(Zn2+/Zn)=−0.76 VE^\circ(\mathrm{Zn^{2+}/Zn})=-0.76\,\mathrm{V}E∘(Zn2+/Zn)=−0.76V. Copper ions are reduced, while zinc metal is oxidized.

Exam tip

Write both values as reduction potentials first. Then identify the cathode from the more positive value.

Key terms · tap one for its definition

standard reduction potential

The potential of a reduction half-reaction under standard conditions, measured relative to a reference electrode.

cathode

The electrode at which reduction occurs.

anode

The electrode at which oxidation occurs.

Part 1 done

2

Part 2 of 4: Subtract reduction potentials to find standard cell potential

The standard cell potential is Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}}=E^\circ_{\text{cathode}}-E^\circ_{\text{anode}}Ecell∘​=Ecathode∘​−Eanode∘​. Use the listed reduction potential for each electrode, even though oxidation occurs at the anode. Both potentials are measured in volts. The calculation gives the potential for the reaction as written. Reversing that reaction reverses the sign of its cell potential. Balancing coefficients do not change either electrode potential. Potential is energy per unit charge, not energy per mole of reaction.

Worked example

Zinc–copper cell potential

Given E∘(Cu2+/Cu)=+0.34 VE^\circ(\mathrm{Cu^{2+}/Cu})=+0.34\,\mathrm{V}E∘(Cu2+/Cu)=+0.34V and E∘(Zn2+/Zn)=−0.76 VE^\circ(\mathrm{Zn^{2+}/Zn})=-0.76\,\mathrm{V}E∘(Zn2+/Zn)=−0.76V, find the standard potential for Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\mathrm{Zn(s)+Cu^{2+}(aq)\rightarrow Zn^{2+}(aq)+Cu(s)}Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s).
  1. 1
    Copper ions are reduced at the cathode; zinc is oxidized at the anode.
  2. 2
    Ecell∘=(+0.34 V)−(−0.76 V)=+1.10 VE^\circ_{\text{cell}}=(+0.34\,\mathrm{V})-(-0.76\,\mathrm{V})=+1.10\,\mathrm{V}Ecell∘​=(+0.34V)−(−0.76V)=+1.10V.

Answer: Ecell∘=+1.10 VE^\circ_{\text{cell}}=+1.10\,\mathrm{V}Ecell∘​=+1.10V.

Common mistake

Do not multiply a reduction potential by a balancing coefficient. Coefficients affect transferred charge, not voltage.

Key term

standard cell potential

The cell potential under standard conditions, found by subtracting the anode reduction potential from the cathode reduction potential.

Part 2 done

Quick check

One question on the part you just read

Easy

A cell uses the reduction half-reactions Ag+/Ag\mathrm{Ag^+/Ag}Ag+/Ag with E∘=+0.80 VE^\circ=+0.80\,\mathrm{V}E∘=+0.80V and Ni2+/Ni\mathrm{Ni^{2+}/Ni}Ni2+/Ni with E∘=−0.25 VE^\circ=-0.25\,\mathrm{V}E∘=−0.25V. Identify the cathode half-reaction in a spontaneous galvanic cell.
Show answer and explanation

Answer: A · Worked explanation

The more positive reduction potential belongs to Ag+/Ag\mathrm{Ag^+/Ag}Ag+/Ag, so silver ions have the greater tendency to gain electrons. Reduction occurs at the cathode, making Ag++e−→Ag\mathrm{Ag^+ + e^- \rightarrow Ag}Ag++e−→Ag the cathode half-reaction. Choosing nickel reduction would incorrectly treat the less positive reduction potential as the stronger tendency to be reduced.
3

Part 3 of 4: The sign of cell potential shows spontaneity

A positive cell potential means the redox reaction is thermodynamically spontaneous as written. A negative potential means the reverse reaction is spontaneous instead. At equilibrium, the cell potential is zero. These statements apply to the conditions at which the potential is measured. In particular, the sign of a standard cell potential establishes spontaneity under standard conditions. It does not guarantee the same sign at every concentration. Spontaneity also does not describe reaction speed. A favorable electron transfer may still proceed slowly because of kinetic barriers.

Interpreting cell potential for a reaction as written

Cell potentialMeaning
PositiveForward reaction is spontaneous
ZeroReaction is at equilibrium
NegativeReverse reaction is spontaneous
Cell potential
Positive
Meaning
Forward reaction is spontaneous
Cell potential
Zero
Meaning
Reaction is at equilibrium
Cell potential
Negative
Meaning
Reverse reaction is spontaneous

Key term

cell potential

The potential difference between a cell’s electrodes for the reaction and conditions specified.

Part 3 done

4

Part 4 of 4: Gibbs free energy change depends on transferred charge

The connection is ΔG=−nFEcell\Delta G=-nFE_{\text{cell}}ΔG=−nFEcell​, or ΔG∘=−nFEcell∘\Delta G^\circ=-nFE^\circ_{\text{cell}}ΔG∘=−nFEcell∘​ under standard conditions. Here, nnn is the moles of electrons transferred per mole of reaction. Faraday’s constant, FFF, is about 96,485 C mol−196{,}485\,\mathrm{C\,mol^{-1}}96,485Cmol−1 of electrons. Since one volt equals one joule per coulomb, these equations give energy per mole of reaction. A positive potential gives a negative free energy change, confirming spontaneity. For the zinc–copper reaction, n=2n=2n=2 and Ecell∘=+1.10 VE^\circ_{\text{cell}}=+1.10\,\mathrm{V}Ecell∘​=+1.10V. Thus, ΔG∘=−(2)(96,485)(1.10)=−212,267 J mol−1\Delta G^\circ=-(2)(96{,}485)(1.10)=-212{,}267\,\mathrm{J\,mol^{-1}}ΔG∘=−(2)(96,485)(1.10)=−212,267Jmol−1, or about −212 kJ mol−1-212\,\mathrm{kJ\,mol^{-1}}−212kJmol−1.

Key term

Faraday’s constant

The magnitude of electric charge carried by one mole of electrons, approximately 96,485 C mol−196{,}485\,\mathrm{C\,mol^{-1}}96,485Cmol−1.

Note read

Check your recall[12 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify the electrode where oxidation occurs.

    Show mark schemeHide mark scheme

    Model answer

    Oxidation occurs at the anode.

    • 1 mark for identifying the anode
  2. 2.Calculate[3 marks]

    Calculate the standard potential for Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s)\mathrm{Zn(s)+Cu^{2+}(aq)\rightarrow Zn^{2+}(aq)+Cu(s)}Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s) using E∘(Cu2+/Cu)=+0.34 VE^\circ(\mathrm{Cu^{2+}/Cu})=+0.34\,\mathrm{V}E∘(Cu2+/Cu)=+0.34V and E∘(Zn2+/Zn)=−0.76 VE^\circ(\mathrm{Zn^{2+}/Zn})=-0.76\,\mathrm{V}E∘(Zn2+/Zn)=−0.76V.

    Show mark schemeHide mark scheme

    Model answer

    Copper is the cathode and zinc is the anode. Ecell∘=Ecathode∘−Eanode∘=0.34−(−0.76)=+1.10 VE^\circ_{\text{cell}}=E^\circ_{\text{cathode}}-E^\circ_{\text{anode}}=0.34-(-0.76)=+1.10\,\mathrm{V}Ecell∘​=Ecathode∘​−Eanode∘​=0.34−(−0.76)=+1.10V.

    • 1 mark for identifying copper as the cathode and zinc as the anode
    • 1 mark for subtracting the zinc reduction potential from the copper reduction potential
    • 1 mark for giving +1.10 V+1.10\,\mathrm{V}+1.10V
  3. 3.Explain[2 marks]

    Explain what a negative standard cell potential means for the reaction as written.

    Show mark schemeHide mark scheme

    Model answer

    The reaction as written is not spontaneous under standard conditions. Its reverse is spontaneous under standard conditions.

    • 1 mark for stating that the forward reaction is not spontaneous under standard conditions
    • 1 mark for stating that the reverse reaction is spontaneous under standard conditions
  4. 4.Calculate[3 marks]

    Calculate ΔG∘\Delta G^\circΔG∘ for a reaction with n=2n=2n=2 and Ecell∘=+1.10 VE^\circ_{\text{cell}}=+1.10\,\mathrm{V}Ecell∘​=+1.10V. Use F=96,485 C mol−1F=96{,}485\,\mathrm{C\,mol^{-1}}F=96,485Cmol−1.

    Show mark schemeHide mark scheme

    Model answer

    ΔG∘=−nFEcell∘=−(2)(96,485)(1.10)=−212,267 J mol−1\Delta G^\circ=-nFE^\circ_{\text{cell}}=-(2)(96{,}485)(1.10)=-212{,}267\,\mathrm{J\,mol^{-1}}ΔG∘=−nFEcell∘​=−(2)(96,485)(1.10)=−212,267Jmol−1, or about −212 kJ mol−1-212\,\mathrm{kJ\,mol^{-1}}−212kJmol−1.

    • 1 mark for using ΔG∘=−nFEcell∘\Delta G^\circ=-nFE^\circ_{\text{cell}}ΔG∘=−nFEcell∘​
    • 1 mark for substituting n=2n=2n=2, F=96,485 C mol−1F=96{,}485\,\mathrm{C\,mol^{-1}}F=96,485Cmol−1, and Ecell∘=+1.10 VE^\circ_{\text{cell}}=+1.10\,\mathrm{V}Ecell∘​=+1.10V
    • 1 mark for giving about −212 kJ mol−1-212\,\mathrm{kJ\,mol^{-1}}−212kJmol−1 or −212,267 J mol−1-212{,}267\,\mathrm{J\,mol^{-1}}−212,267Jmol−1
  5. 5.Explain[3 marks]

    Explain why doubling every reaction coefficient doubles ΔG∘\Delta G^\circΔG∘ but leaves Ecell∘E^\circ_{\text{cell}}Ecell∘​ unchanged.

    Show mark schemeHide mark scheme

    Model answer

    Doubling the coefficients doubles the moles of electrons transferred, so nnn doubles. Cell potential is energy per unit charge, so it stays unchanged. Therefore, ΔG∘=−nFEcell∘\Delta G^\circ=-nFE^\circ_{\text{cell}}ΔG∘=−nFEcell∘​ doubles in magnitude.

    • 1 mark for stating that doubling the coefficients doubles nnn
    • 1 mark for stating that cell potential remains unchanged because it is energy per unit charge
    • 1 mark for using ΔG∘=−nFEcell∘\Delta G^\circ=-nFE^\circ_{\text{cell}}ΔG∘=−nFEcell∘​ to show that free energy change doubles

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Determine[1 mark]

For a redox reaction as written, the measured cell potential is +0.18 V+0.18\,\mathrm{V}+0.18V. What does this sign indicate for the reaction under the stated conditions?
Show answer and explanation

Answer: C · Worked explanation

A positive cell potential indicates that the reaction as written is thermodynamically spontaneous under the conditions of the measurement. A zero potential, not a positive one, corresponds to equilibrium. The tempting claim that the reaction must proceed rapidly confuses thermodynamic favorability with reaction kinetics; cell potential alone does not determine speed.
3.

Easy·Identify[1 mark]

Which equation correctly relates Gibbs free energy change to cell potential for a reaction transferring nnn moles of electrons per mole of reaction?
Show answer and explanation

Answer: D · Worked explanation

Gibbs free energy change and cell potential are related by ΔG=−nFEcell\Delta G=-nFE_{\text{cell}}ΔG=−nFEcell​. The negative sign means a positive cell potential corresponds to a negative free energy change. Using a plus sign would reverse this relationship and would incorrectly associate a spontaneous positive-potential reaction with positive ΔG\Delta GΔG.
4.

Easy·State[1 mark]

A balanced redox equation is multiplied by 3, while the same reduction half-reactions and conditions are retained. What happens to the cell potential calculated from the reduction potentials?
Show answer and explanation

Answer: D · Worked explanation

Cell potential is an intensive quantity, so multiplying the balanced equation by 3 does not change either electrode's reduction potential or their difference. The transferred amount of charge and the free energy for the scaled reaction increase, but the voltage remains the same. Multiplying a reduction potential by a reaction coefficient would incorrectly treat voltage like an extensive quantity.
5.

Medium·Calculate[2 marks]

For the reaction Fe(s)+2Ag+(aq)→Fe2+(aq)+2Ag(s)\mathrm{Fe(s)+2Ag^+(aq)\rightarrow Fe^{2+}(aq)+2Ag(s)}Fe(s)+2Ag+(aq)→Fe2+(aq)+2Ag(s), the standard reduction potentials are E∘(Ag+/Ag)=+0.80 VE^\circ(\mathrm{Ag^+/Ag})=+0.80\,\mathrm{V}E∘(Ag+/Ag)=+0.80V and E∘(Fe2+/Fe)=−0.44 VE^\circ(\mathrm{Fe^{2+}/Fe})=-0.44\,\mathrm{V}E∘(Fe2+/Fe)=−0.44V. Calculate Ecell∘E^\circ_{\text{cell}}Ecell∘​.
Show answer and explanation

Answer: B · Worked explanation

Silver ions are reduced at the cathode, and iron is oxidized at the anode. Using both listed values as reduction potentials gives Ecell∘=Ecathode∘−Eanode∘=+0.80−(−0.44)=+1.24 VE^\circ_{\text{cell}}=E^\circ_{\text{cathode}}-E^\circ_{\text{anode}}=+0.80-(-0.44)=+1.24\,\mathrm{V}Ecell∘​=Ecathode∘​−Eanode∘​=+0.80−(−0.44)=+1.24V. The tempting +2.48 V+2.48\,\mathrm{V}+2.48V results from incorrectly multiplying the silver potential by its coefficient of 2.
6.

Medium·Deduce[2 marks]

A cell reaction has Ecell=−0.12 VE_{\text{cell}}=-0.12\,\mathrm{V}Ecell​=−0.12V under its current conditions. Deduce which direction is thermodynamically spontaneous.
Show answer and explanation

Answer: A · Worked explanation

A negative cell potential means the reaction in the written direction is not spontaneous under the stated conditions, so the reverse direction is spontaneous. Equilibrium requires a cell potential of zero, not a negative value. The negative sign does not imply that neither direction can occur; it identifies which direction is thermodynamically favored.
7.

Medium·Calculate[2 marks]

A cell reaction transfers 3.0 moles of electrons per mole of reaction and has Ecell=+0.40 VE_{\text{cell}}=+0.40\,\mathrm{V}Ecell​=+0.40V. Using F=96,485 C mol−1F=96{,}485\,\mathrm{C\,mol^{-1}}F=96,485Cmol−1, calculate ΔG\Delta GΔG per mole of reaction.
Show answer and explanation

Answer: B · Worked explanation

Use ΔG=−nFEcell\Delta G=-nFE_{\text{cell}}ΔG=−nFEcell​: ΔG=−(3.0)(96,485)(0.40) J mol−1=−115,782 J mol−1\Delta G=-(3.0)(96{,}485)(0.40)\,\mathrm{J\,mol^{-1}}=-115{,}782\,\mathrm{J\,mol^{-1}}ΔG=−(3.0)(96,485)(0.40)Jmol−1=−115,782Jmol−1, or about −116 kJ mol−1-116\,\mathrm{kJ\,mol^{-1}}−116kJmol−1. The positive result has the wrong sign for a positive potential. The factor of 3.0 is the electron amount per mole of reaction, not a divisor.
8.

Medium·Determine[2 marks]

For the reaction X(s)+Y2+(aq)→X2+(aq)+Y(s)\mathrm{X(s)+Y^{2+}(aq)\rightarrow X^{2+}(aq)+Y(s)}X(s)+Y2+(aq)→X2+(aq)+Y(s), E∘(X2+/X)=−0.60 VE^\circ(\mathrm{X^{2+}/X})=-0.60\,\mathrm{V}E∘(X2+/X)=−0.60V and E∘(Y2+/Y)=−0.20 VE^\circ(\mathrm{Y^{2+}/Y})=-0.20\,\mathrm{V}E∘(Y2+/Y)=−0.20V. Determine the standard cell potential for the reaction as written.
Show answer and explanation

Answer: A · Worked explanation

As written, Y2+\mathrm{Y^{2+}}Y2+ is reduced and X\mathrm{X}X is oxidized. Subtracting the anode reduction potential from the cathode reduction potential gives Ecell∘=(−0.20)−(−0.60)=+0.40 VE^\circ_{\text{cell}}=(-0.20)-(-0.60)=+0.40\,\mathrm{V}Ecell∘​=(−0.20)−(−0.60)=+0.40V. The negative choice reverses the subtraction.
9.

Medium·Compare[2 marks]

Two reactions each have Ecell∘=+0.50 VE^\circ_{\text{cell}}=+0.50\,\mathrm{V}Ecell∘​=+0.50V. Reaction P transfers 1 mole of electrons per mole of reaction, while reaction Q transfers 2 moles. Compare their standard Gibbs free energy changes.
Show answer and explanation

Answer: B · Worked explanation

Because ΔG∘=−nFEcell∘\Delta G^\circ=-nFE^\circ_{\text{cell}}ΔG∘=−nFEcell∘​, the same positive potential gives a negative free energy change whose magnitude is proportional to nnn. Reaction Q transfers twice as many moles of electrons per mole of reaction, so its ΔG∘\Delta G^\circΔG∘ has twice the magnitude of reaction P's. Equal potentials alone do not guarantee equal free energy changes.
10.

Hard·Explain[2 marks]

A reaction has Ecell∘=+0.25 VE^\circ_{\text{cell}}=+0.25\,\mathrm{V}Ecell∘​=+0.25V, but its cell potential under a particular set of concentrations is measured as −0.03 V-0.03\,\mathrm{V}−0.03V. Which conclusion is justified?
Show answer and explanation

Answer: C · Worked explanation

The positive standard potential indicates that the forward reaction is spontaneous under standard conditions. Under the stated concentrations, however, the actual potential is negative, so the reverse reaction is spontaneous there. A common misconception is to treat the standard potential's sign as controlling all conditions; the note's spontaneity rule depends on the potential at the conditions being considered.

Keep going

Next topic9.10 Cell potential under nonstandard conditionsPrevious topic9.8 Galvanic and electrolytic cells

More in Unit 9 · Thermodynamics and Electrochemistry

  1. 9.3Gibbs free energy and thermodynamic favorabilityNotes · 10 questions
  2. 9.4Thermodynamic and kinetic controlNotes · 9 questions
  3. 9.5Free energy and equilibriumNotes · 10 questions
  4. 9.6Free energy of dissolutionNotes · 10 questions
  5. 9.7Coupled reactionsNotes · 10 questions
  6. 9.8Galvanic and electrolytic cellsNotes · 10 questions
  7. 9.9Cell potential and free energyNotes · 10 questions
  8. 9.10Cell potential under nonstandard conditionsNotes · 10 questions
  9. 9.11Electrolysis and Faraday's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Reduction potentials identify the cathode and anode
  2. 2Subtract reduction potentials to find standard cell potential
  3. 3The sign of cell potential shows spontaneity
  4. 4Gibbs free energy change depends on transferred charge
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe