Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Chemistry
  3. ›9 Thermodynamics and Electrochemistry
  4. ›9.8 Galvanic and electrolytic cells

AP Chemistry · Unit 9 · Thermodynamics and Electrochemistry

9.8 Galvanic and electrolytic cells

Describe both cell types, identify their electrodes, and trace electron and ion flow.

  • 3 min read
  • 4 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/4Galvanic cells turn spontaneous reactions into electrical energy
  1. 1Galvanic cells turn spontaneous reactions into electrical energy
  2. 2Oxidation and reduction identify the electrodes in every cell
  3. 3Electrolytic cells use electrical energy to drive reactions
  4. 4Ion movement balances charge in both cell types
  5. Check your recall
  6. Practice: 10 questions
1

Part 1 of 4: Galvanic cells turn spontaneous reactions into electrical energy

A galvanic cell uses a spontaneous redox reaction to produce electrical energy. Its two half-cells each contain an electrode in contact with an electrolyte. An external wire connects the electrodes. A salt bridge connects the solutions while limiting their mixing. It lets ions move between the half-cells, so charge does not build up and stop the reaction.

Electrons leave the electrode where oxidation occurs and travel through the wire to the electrode where reduction occurs. Ions move through the solutions and salt bridge, not through the wire. These separate paths complete the circuit.

Figure 1. Electrons travel through the wire. Ions travel through the solutions and salt bridge.

Key terms · tap one for its definition

galvanic cell

A galvanic cell converts energy from a spontaneous redox reaction into electrical energy.

half-cells

Half-cells are the separate electrode–electrolyte regions where oxidation and reduction occur.

salt bridge

A salt bridge permits ion movement between galvanic half-cells to maintain charge balance.

Part 1 done

2

Part 2 of 4: Oxidation and reduction identify the electrodes in every cell

The anode is always the electrode where oxidation occurs. The cathode is always the electrode where reduction occurs. These definitions apply to both cell types. In a galvanic cell, oxidation releases electrons at the anode. Electrons then reach the cathode through the external wire.

The galvanic anode is negative because it supplies electrons to the circuit. The galvanic cathode is positive because it receives them. Electrode signs change in an electrolytic cell, but the oxidation and reduction labels do not.

Common mistake

Do not identify an anode by its sign alone. Identify oxidation first, then name that electrode the anode.

Key terms · tap one for its definition

anode

The anode is the electrode where oxidation occurs in either cell type.

cathode

The cathode is the electrode where reduction occurs in either cell type.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the component that connects the two solutions in a galvanic cell and allows ions to move between them while limiting mixing.
Show answer and explanation

Answer: C · Worked explanation

The salt bridge connects the half-cell solutions and permits ion movement, helping prevent charge from building up. The external wire connects the electrodes and carries electrons, so it is the tempting alternative but does not provide the ion pathway between the solutions.
3

Part 3 of 4: Electrolytic cells use electrical energy to drive reactions

An electrolytic cell uses an external power supply to drive a nonspontaneous redox reaction. Its electrodes contact an electrolyte, which may be a solution or a molten substance. The power supply removes electrons from the anode and delivers electrons to the cathode. Oxidation still occurs at the anode, and reduction still occurs at the cathode.

The power supply makes the electrolytic anode positive and the cathode negative. Electrons move through the external connections and power supply. They do not cross the electrolyte as free electrons. This differs from a galvanic cell, which produces electrical energy instead of consuming it.

Key term

electrolytic cell

An electrolytic cell uses an external power supply to drive a nonspontaneous redox reaction.

Part 3 done

4

Part 4 of 4: Ion movement balances charge in both cell types

An electrolyte contains mobile ions that carry charge through a solution or melt. In an electrolytic cell, cations move toward the cathode, while anions move toward the anode. They may react there, depending on the substances present.

In a galvanic cell, ions in the salt bridge maintain charge balance. Anions migrate toward the anode half-cell, where oxidation commonly produces positive ions. Cations migrate toward the cathode half-cell, where reduction commonly removes positive ions. Electron flow remains outside the solutions in both cell types. Ion movement inside them keeps the circuit operating.

Exam tip

When tracing charge flow, name both paths: electrons through external connections and ions through the electrolyte.

Key term

electrolyte

An electrolyte is a solution or molten substance containing mobile ions that carry charge.

Note read

Check your recall[14 marks]

5 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Describe[3 marks]

    Describe how a galvanic cell produces electrical energy.

    Show mark schemeHide mark scheme

    Model answer

    A spontaneous redox reaction releases electrons at the anode. Electrons flow through an external wire to the cathode. Ion movement through the solutions and salt bridge maintains charge balance.

    • 1 mark for stating that a spontaneous redox reaction drives the cell
    • 1 mark for describing electron flow from anode to cathode through the external wire
    • 1 mark for explaining that ion movement maintains charge balance
  2. 2.Identify[2 marks]

    Identify where oxidation and reduction occur in either cell type.

    Show mark schemeHide mark scheme

    Model answer

    Oxidation occurs at the anode, and reduction occurs at the cathode.

    • 1 mark for identifying the anode as the site of oxidation
    • 1 mark for identifying the cathode as the site of reduction
  3. 3.Compare[4 marks]

    Compare the energy source and electrode signs in galvanic and electrolytic cells.

    Show mark schemeHide mark scheme

    Model answer

    A galvanic cell uses a spontaneous reaction to produce electrical energy. Its anode is negative and its cathode is positive. An electrolytic cell uses a power supply to drive a nonspontaneous reaction. Its anode is positive and its cathode is negative.

    • 1 mark for stating that a galvanic cell produces electrical energy from a spontaneous reaction
    • 1 mark for giving the galvanic anode as negative and cathode as positive
    • 1 mark for stating that an electrolytic cell uses electrical energy to drive a nonspontaneous reaction
    • 1 mark for giving the electrolytic anode as positive and cathode as negative
  4. 4.Explain[2 marks]

    Explain how electrons reach the cathode in an electrolytic cell.

    Show mark schemeHide mark scheme

    Model answer

    The power supply delivers electrons to the cathode through an external connection. Free electrons do not travel through the electrolyte.

    • 1 mark for stating that the power supply delivers electrons through an external connection
    • 1 mark for stating that free electrons do not cross the electrolyte
  5. 5.Describe[3 marks]

    Describe ion movement in an electrolytic cell and a galvanic salt bridge.

    Show mark schemeHide mark scheme

    Model answer

    In an electrolytic cell, cations move toward the cathode and anions toward the anode. In a galvanic salt bridge, anions move toward the anode half-cell and cations toward the cathode half-cell.

    • 1 mark for describing cation movement toward the cathode in an electrolytic cell
    • 1 mark for describing anion movement toward the anode in an electrolytic cell
    • 1 mark for describing anions moving toward the galvanic anode half-cell and cations toward the cathode half-cell

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the quick check in the note above.

2.

Easy·Identify[1 mark]

In a galvanic cell, oxidation occurs at the electrode that supplies electrons to the external wire. What is this electrode called?
Show answer and explanation

Answer: D · Worked explanation

Oxidation occurs at the anode in both galvanic and electrolytic cells. In a galvanic cell, oxidation releases electrons that can travel through the external wire; the cathode is instead the site of reduction.
3.

Easy·State[1 mark]

State the energy change that characterizes an electrolytic cell.
Show answer and explanation

Answer: D · Worked explanation

An electrolytic cell consumes electrical energy from an external power supply to drive a nonspontaneous redox reaction. The option describing a spontaneous reaction producing electrical energy instead characterizes a galvanic cell, so it reverses the energy role.
4.

Easy·Identify[1 mark]

Identify the electrode where reduction occurs in an electrochemical cell.
Show answer and explanation

Answer: D · Worked explanation

The cathode is defined as the electrode where reduction occurs, regardless of whether the cell is galvanic or electrolytic. The anode is the site of oxidation; electrode signs can change between cell types, but these reaction labels do not.
5.

Medium·Determine[2 marks]

In a galvanic cell, electrons leave electrode P and travel through a wire to electrode Q. Which statement correctly describes the reaction sites and electron path?
Show answer and explanation

Answer: B · Worked explanation

Electrons leave the electrode where oxidation occurs, so P is the anode; they reach the electrode where reduction occurs, so Q is the cathode. Electrons travel in the external wire, while ions move through the solutions and salt bridge. The option placing electrons in the salt bridge confuses the two charge-carrier paths.
6.

Medium·Deduce[2 marks]

A galvanic cell has a salt bridge containing mobile cations and anions. Oxidation in the left half-cell produces positive ions, while reduction in the right half-cell removes positive ions. Deduce the net direction of salt-bridge ion migration.
Show answer and explanation

Answer: A · Worked explanation

The left half-cell gains positive ions during oxidation, so anions migrate from the bridge toward the left to maintain charge balance. Reduction removes positive ions in the right half-cell, so cations migrate toward the right. The reversed migration direction would worsen, rather than balance, the charge changes.
7.

Medium·Compare[2 marks]

Which comparison correctly distinguishes charge-carrier movement in an electrolytic cell from movement in its external connections?
Show answer and explanation

Answer: A · Worked explanation

In an electrolytic cell, mobile cations move toward the cathode and anions toward the anode through the electrolyte, while electrons travel through external connections and the power supply. The tempting reversed-ion option switches the destinations: cations are attracted toward the cathode, not the anode.
8.

Medium·Explain[2 marks]

A student observes that a galvanic cell stops producing current when its salt bridge is removed, even though its wire remains connected. Which explanation best accounts for this observation?
Show answer and explanation

Answer: A · Worked explanation

The salt bridge provides an ion pathway that maintains charge balance between the half-cells, allowing the redox reaction and current to continue. The wire remains the electron pathway, so the claim that removing the bridge directly interrupts electron flow through the wire confuses the separate circuit paths.
9.

Hard·Deduce[2 marks]

An unknown cell is powered by an external source. At electrode R, oxidation is observed; electrode S receives electrons from the power supply. Deduce the electrode identities and signs.
Show answer and explanation

Answer: C · Worked explanation

Oxidation identifies R as the anode, and an electrolytic cell's external power supply makes its anode positive. Since S receives electrons and is the site of reduction, it is the cathode and is negative. The tempting negative-anode choice applies the galvanic-cell sign convention to a cell driven by an external source.
10.

Hard·Analyze[2 marks]

A cell uses a power supply to drive a nonspontaneous reaction. Electrons are removed from electrode M by the supply and delivered to electrode N. Which interpretation is consistent with the cell's operation?
Show answer and explanation

Answer: A · Worked explanation

The power supply removes electrons from M, so oxidation occurs there and M is the anode. It delivers those electrons to N, where reduction occurs, making N the cathode. A common trap is to reverse the electrode names based on electron movement alone; the defining reactions are oxidation at the anode and reduction at the cathode.

Keep going

Next topic9.9 Cell potential and free energyPrevious topic9.7 Coupled reactions

More in Unit 9 · Thermodynamics and Electrochemistry

  1. 9.3Gibbs free energy and thermodynamic favorabilityNotes · 10 questions
  2. 9.4Thermodynamic and kinetic controlNotes · 9 questions
  3. 9.5Free energy and equilibriumNotes · 10 questions
  4. 9.6Free energy of dissolutionNotes · 10 questions
  5. 9.7Coupled reactionsNotes · 10 questions
  6. 9.8Galvanic and electrolytic cellsNotes · 10 questions
  7. 9.9Cell potential and free energyNotes · 10 questions
  8. 9.10Cell potential under nonstandard conditionsNotes · 10 questions
  9. 9.11Electrolysis and Faraday's lawNotes · 10 questions

All AP Chemistry topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/4 read

  1. 1Galvanic cells turn spontaneous reactions into electrical energy
  2. 2Oxidation and reduction identify the electrodes in every cell
  3. 3Electrolytic cells use electrical energy to drive reactions
  4. 4Ion movement balances charge in both cell types
  5. Check your recall
  6. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe