Scribe logoScribeNotes & practice
Sign inStart free
  1. Notes
  2. ›AP Environmental Science
  3. ›5 Land and Water Use
  4. ›5.6 Pest control methods

AP Environmental Science · Unit 5 · Land and Water Use

5.6 Pest control methods

Describe chemical, biological, and physical pest control, weigh the pros and cons of pesticides, and identify alternatives to chemical control.

  • 4 min read
  • 5 parts
  • 10 questions
  • Draft
Start a Quick 5 on this topic→Jump to the 10 questions
1/5Pests reduce crop yields, so farmers control them
  1. 1Pests reduce crop yields, so farmers control them
  2. 2Chemical pesticides act fast and protect yields
  3. 3Pesticide use can harm other organisms and ecosystems
  4. 4Biological control uses a pest’s natural enemies
  5. 5Physical barriers and crop rotation avoid chemicals altogether
  6. Check your recall
  7. Practice: 10 questions
1

Part 1 of 5: Pests reduce crop yields, so farmers control them

A hungry insect, a weed, or a fungus can ruin part of a harvest. Such an organism is a pest. Farmers protect their crops with methods that fall into three groups: chemical, biological, and physical.

Chemical control uses a pesticide, a substance made to kill or repel pests. Biological control uses living enemies of the pest. Physical control uses barriers, traps, or direct removal.

Each group has strengths and costs. The best choice depends on the crop, the pest, and the budget.

Key terms · tap one for its definition

pest

A pest is an organism that damages crops, livestock, or stored food, such as an insect, weed, or fungus.

pesticide

A pesticide is a chemical substance applied to kill, repel, or limit the growth of pests.

Part 1 done

2

Part 2 of 5: Chemical pesticides act fast and protect yields

Imagine aphids swarming a field of beans. A farmer can spray, and most of the aphids die within hours or days. This speed is the main reason chemical control is so widely used.

Pesticides are named for their targets. An insecticide kills insects. A herbicide kills weeds. A fungicide targets fungi.

Pesticides raise yields because crops lose less to pests. They are often cheap, easy to apply, and effective over large areas. Some also reduce insect-borne disease in people. Farmers can apply them quickly when an outbreak appears.

Key terms · tap one for its definition

insecticide

An insecticide is a pesticide designed to kill insects.

herbicide

A herbicide is a pesticide designed to kill weeds and other unwanted plants.

Part 2 done

Quick check

One question on the part you just read

Easy

Identify the type of pesticide made to kill weeds.
Show answer and explanation

Answer: A · Worked explanation

A herbicide targets weeds and other unwanted plants. An insecticide targets insects, and a fungicide targets fungi. Crop rotation is a farming practice, not a chemical pesticide, and an insecticide would not harm the weeds that compete with the crop.
3

Part 3 of 5: Pesticide use can harm other organisms and ecosystems

Chemical control also has costs. Many pesticides kill harmless or helpful species too, such as bees that pollinate crops and insects that eat pests. Rain can wash them into streams and lakes, and exposure can threaten the health of farm workers.

Some pesticides last a long time in the environment. They can build up through food chains by biomagnification, so top predators carry the highest concentrations.

Pests also adapt. When a spray kills most of a population, survivors with helpful genes breed. Over several generations most of the population may carry those genes. This is pesticide resistance, and it forces farmers to use more or different chemicals.

Common mistake

Individual pests do not become resistant during their lives. Resistance spreads because resistant survivors reproduce.

Key terms · tap one for its definition

biomagnification

Biomagnification is the increase in concentration of a persistent substance at each higher level of a food chain.

pesticide resistance

Pesticide resistance is the evolved ability of a pest population to survive doses of a pesticide that once killed it.

Part 3 done

4

Part 4 of 5: Biological control uses a pest’s natural enemies

Some farmers avoid sprays by using a pest’s natural enemies instead. Biological control uses predators, parasites, or disease-causing microbes to reduce pest numbers.

Ladybugs eat aphids, and parasitic wasps lay eggs in caterpillars. Releasing these animals can keep pest numbers low. Little or no chemical residue is left, and non-target species are usually harmed less.

The method has limits. It works slowly and may not remove a pest completely. An introduced control species can also become a pest itself, or harm native species.

Exam tip

When describing biological control, name both the control organism and the pest it feeds on or infects.

Key term

biological control

Biological control is the use of a pest’s natural predators, parasites, or pathogens to reduce its numbers.

Part 4 done

Quick check

One question on the part you just read

Easy

Releasing ladybugs to eat aphids is an example of which type of pest control?
Show answer and explanation

Answer: B · Worked explanation

Ladybugs are living predators of aphids, so this is biological control. Chemical control would use a pesticide, and physical control would use barriers or traps. Herbicides kill weeds, not insects, so they are unrelated to this example.
5

Part 5 of 5: Physical barriers and crop rotation avoid chemicals altogether

Now consider methods that need no chemicals and no living control species. Physical control blocks or removes pests directly. Examples include netting over crops, traps, hand-picking, and tilling soil to expose pests.

Farmers can also change how they grow crops. In crop rotation, a different crop is planted in a field each season. Pests that feed on one crop decline when that crop is absent.

These methods leave no chemical residue and avoid resistance. They often need more labor and work more slowly than sprays.

Comparison of three pest control approaches

ApproachSpeedRisk to other speciesOther limit
ChemicalFastHigherPests evolve resistance
BiologicalSlowLower, unless the control species spreadsResults are less predictable
PhysicalSlowLowLabor and equipment needed
Approach
Chemical
Speed
Fast
Risk to other species
Higher
Other limit
Pests evolve resistance
Approach
Biological
Speed
Slow
Risk to other species
Lower, unless the control species spreads
Other limit
Results are less predictable
Approach
Physical
Speed
Slow
Risk to other species
Low
Other limit
Labor and equipment needed

Exam tip

When asked to compare methods, weigh speed, cost, and environmental harm. A one-sided answer earns fewer marks.

Go deeperSlowing the spread of resistance

Farmers can slow resistance by rotating different pesticides and spraying only when pest numbers justify it. They can also leave some untreated areas where nonresistant pests survive.

These survivors breed with resistant pests, which keeps nonresistant genes common in the population.

Key terms · tap one for its definition

physical control

Physical control is the use of barriers, traps, or direct removal to keep pests from crops.

crop rotation

Crop rotation is the practice of growing different crops in the same field in a planned sequence over seasons.

Note read

Check your recall[13 marks]

6 written questions. Answer each one in your head or on paper, then open the mark scheme.

  1. 1.Identify[1 mark]

    Identify the type of pesticide used to kill weeds.

    Show mark schemeHide mark scheme

    Model answer

    A herbicide.

    • 1 mark for naming a herbicide
  2. 2.Explain[2 marks]

    Explain how pesticide resistance develops in a pest population.

    Show mark schemeHide mark scheme

    Model answer

    A pesticide kills most pests, but survivors carry genes that let them survive. These survivors reproduce and pass on the genes, so resistant pests become a larger share of the population.

    • 1 mark for stating that survivors have genes that allow them to survive the pesticide
    • 1 mark for explaining that survivors reproduce and pass on the genes so resistance becomes more common
  3. 3.Describe[2 marks]

    Describe how a persistent pesticide can harm a top predator that was never sprayed.

    Show mark schemeHide mark scheme

    Model answer

    The pesticide lasts in the environment and builds up at each higher level of a food chain. A top predator therefore holds the highest concentration, which can harm it.

    • 1 mark for stating that the pesticide persists and builds up through the food chain (biomagnification)
    • 1 mark for stating that top predators carry the highest concentration
  4. 4.Compare[3 marks]

    Compare chemical control with physical control of pests.

    Show mark schemeHide mark scheme

    Model answer

    Chemical control acts fast, but it can harm other species and lead to resistance. Physical control is slower and needs more labor. It leaves no chemical residue and does not cause resistance.

    • 1 mark for stating that chemical control is faster
    • 1 mark for stating that chemical control can harm other species or cause resistance
    • 1 mark for stating that physical control is slower or more labor-intensive and avoids chemical harm
  5. 5.Identify[2 marks]

    Identify two alternatives to chemical pest control.

    Show mark schemeHide mark scheme

    Model answer

    Biological control, such as releasing predators, and physical control, such as netting. Crop rotation is also an alternative.

    • 1 mark for identifying one valid alternative
    • 1 mark for identifying a second valid alternative
  6. 6.Justify[3 marks]

    Justify using crop rotation instead of a pesticide to reduce a pest that feeds on only one crop.

    Show mark schemeHide mark scheme

    Model answer

    Planting a different crop removes the pest’s food, so its numbers fall. No chemical is released, so there is no runoff or harm to other species. It also avoids pesticide resistance.

    • 1 mark for stating that the pest loses its food source when the crop changes
    • 1 mark for stating that no chemical is used, so there is no harm to other species or runoff
    • 1 mark for stating that it avoids pesticide resistance

Practice this topic

10 quick-fire multiple-choice questions, easy to hard. Tap an answer to see if you're right and the worked explanation. (The written questions with mark schemes are under “Check your recall” above.)

0 right0 of 10 answered

Includes the 2 quick checks in the note above.

3.

Easy[1 mark]

Which action is an example of physical pest control?
Show answer and explanation

Answer: C · Worked explanation

Netting blocks pests from reaching the plants, which is physical control. Both sprays are chemical control, and parasitic wasps are a living control species, so releasing them is biological control. Only netting keeps pests out without chemicals or living enemies.
4.

Medium·Determine[2 marks]

A spray kills 96% of 250,000 insects. Determine how many survive and what the survivors can pass to their offspring.
Show answer and explanation

Answer: D · Worked explanation

If 96% die, 4% survive: 0.04×250,000=10,0000.04\times250{,}000=10{,}0000.04×250,000=10,000. Survivors pass on genes they already had, so resistance is inherited. The value 240,000 is the number killed, and resistance is not gained by exposure during an individual’s life.
5.

Medium[2 marks]

A persistent pesticide washes into a lake. Which organism is most likely to hold the highest concentration in its body?
Show answer and explanation

Answer: A · Worked explanation

Biomagnification raises the concentration of a persistent pesticide at each higher level of a food chain, so a top predator holds the most. Algae and zooplankton sit lower in the chain and carry smaller concentrations.
6.

Medium[2 marks]

Why does rotating crops reduce a pest that feeds on only one crop?
Show answer and explanation

Answer: B · Worked explanation

A pest that feeds on one crop has nothing to eat when a different crop is planted, so its population declines. Rotation does not make crops predators, and pests do not choose fields by learning. Resistance is a problem of repeated pesticide use.
7.

Medium[2 marks]

Which risk is associated with biological control?
Show answer and explanation

Answer: C · Worked explanation

A control species released into a new area can spread and harm native species, so it may become a pest. Biological control usually leaves little chemical residue, and it generally works more slowly than a spray.
8.

Hard[2 marks]

A farmer sprays a pesticide that kills many insect species every week. After two seasons, aphid outbreaks are worse than before. Which explanation fits best?
Show answer and explanation

Answer: A · Worked explanation

Killing predators removes natural control, while repeated spraying favors aphids whose genes help them survive. Resistance spreads through reproduction, not through gradual change in one aphid. Biomagnification concerns concentrations of a substance in predators, not pest numbers.
9.

Hard[2 marks]

A small vegetable farm sits next to a stream. The owner wants the lowest risk to the stream and to non-target insects, and can accept extra labor. Which approach fits best?
Show answer and explanation

Answer: B · Worked explanation

Netting and hand-picking keep pests off the crops without chemicals, so runoff and non-target harm are low. Sprays and persistent herbicides can reach the stream and harm non-target insects, and an introduced predator from another continent could itself harm native species or become a pest.
10.

Hard[2 marks]

Which statement about pesticide use is correct?
Show answer and explanation

Answer: D · Worked explanation

Persistent pesticides travel through runoff and food chains, so animals far from the field can be exposed. Resistance arises through reproduction of survivors, not through immunity in one pest. Biological control can harm other species, and physical control is usually slower than sprays.

Keep going

Next topic5.7 Meat production methodsPrevious topic5.5 Irrigation methods

More in Unit 5 · Land and Water Use

  1. 5.2ClearcuttingNotes · 10 questions
  2. 5.3The Green RevolutionNotes · 10 questions
  3. 5.4Impacts of agricultural practicesNotes · 10 questions
  4. 5.5Irrigation methodsNotes · 10 questions
  5. 5.6Pest control methodsNotes · 10 questions
  6. 5.7Meat production methodsNotes · 10 questions
  7. 5.8OverfishingNotes · 10 questions
  8. 5.9MiningNotes · 10 questions
  9. 5.10UrbanizationNotes · 10 questions

All AP Environmental Science topics →

Draft: written by Scribe and checked automatically, not yet by a subject reviewer.

Practice questions are original, written by Scribe and checked automatically for correctness.

Topic codes follow the official numbering. Not endorsed by College Board or any exam board.

On this page

0/5 read

  1. 1Pests reduce crop yields, so farmers control them
  2. 2Chemical pesticides act fast and protect yields
  3. 3Pesticide use can harm other organisms and ecosystems
  4. 4Biological control uses a pest’s natural enemies
  5. 5Physical barriers and crop rotation avoid chemicals altogether
  6. Check your recall
  7. Practice: 10 questions
All coursesScribeHow it worksPricingPrivacyTerms

Notes and questions are written by Scribe in our own words. Topic codes follow the official course numbering so you can find your place. Not produced or endorsed by the IB, College Board, AQA, OCR, Pearson Edexcel or any exam board.

© 2026 Scribe